Refresh rate of screen on my Portege M300 stuck on 60 Hz.

Similar Questions

• Satellite U200 - questions on the screen refresh rate

  Satellite U200-148 WINXPHOMESP2
  Card video Mobile Intel (R) Express Chipset Family 945GM
  Amount of video memory 128
  Accelerated Graphics Port - it's inaccessible
  The screen 60 hertz frequency
  Questions
  (1) accelerated Graphics Port - it is enabled if so that it is necessary to make it became accessible.
  (2) the question whether with 60 hertz frequency can be increased up to 75.

  Hello

  I noticed that on some computers laptops Toshiba, the screen refresh rate is fixed on 60 Hz.
  The screen refresh rate is not important on laptop screens.
  Matrix TFT is not such a thing as the refresh rate. It is not blinking.
  TFT as all other LCD screens do not refresh rate setting, only the reaction time.
  Your eyes are sure ;)

  PS: as much as I know AGP port is not available.

• Satellite Pro U400-11V: possible to increase the 60 Hz screen refresh rate

  I have a laptop Toshiba Satellite Pro U400-11v.
  I just realized that my screen refresh rate is 60 Hz (resolution 1280 x 800).
  Even I decrease the resolution. It won t be another option 60 Hertz.
  Is it possible to increase it?
  My monitor is indicated under the generic name of the PnP in the system.

  You cannot increase the internal laptop display refresh rate and it of not necessary to go higher, because all the internal laptop screens are running at 60 Hz.
  If you would like to connect an external monitor, you will probably see higher available for the external monitor refresh rates.

• Satellite A100-153: what are verical and horizontal for my screen refresh rate

  How can - I found what verical and horizontal for my screen refresh rate?

  Hello

  Do you mean the vertical and horizontal display resolution?

  In any case all the information should be included in the user manual.
  I put t knows exactly what schedule is in him, but it should be placed somewhere at the end of the user manual.
  This information is also in my user manual that has been delivered and preinstalled on my laptop Satellite.

• Bad screen refresh rate shown under Vista - Satellite P100-429

  Hello

  I have a Satellite P100-429. There are three weak, I install Windows Vista Ultimate Edition, but now the highest of screen refresh rate is 60 Hz. I tried to download the latest drivers for the graphics card, but this will not work and the computer also says that the monitor is called generic PNP.

  Before Vista has a 100 Hz screen refresh rate and monitor had his screen Toshiba TruBrite WXGA + TFT of own name I tried looking for drivers for the monitor but without success, someone can help me pretty please, I get headaches for the low screen refresh rate.

  Hello

  Have you installed the right graphics card driver?
  Immediately after installation of Vista, the operating system uses Microsoft's own common graphics driver.
  If you want to use additional graphics options, you need to install the compatible graphics card driver.

  But I want to clarify something. The LCD or TFT screens give excellent quality and resolution at 60 Hz.
  the Refresh on TFT rate simply won't say the same thing about monitors CRT.
  Response time, brightness of the Image and the contrast of the Image are more important for a TFT or LCD monitor like the refresh rate.

  Performance display and the quality isn't worst if it run on 60 Hz
  Therefore, I see no reason to change the refresh rate of 100 Hz

• Satellite M55-s3315: screen refresh rate is 60 Hz?

  I bought Toshiba m55-s3315 analog sagbo m50 with intel integrated, 910 shared dynamic 128 MB of memory; screen - 14.0 "large display with Toshiba TruBrite WXGA. The only refresh rate, I get is 60 Hertz. I've updated the software chip intel and toshiba also... I would like to know - is it possible to get more than 60 Hertz. The only way is to get 85 Hertz is adding external monitor. I have now oportinity to get at least 75 Hertz, screen refresh rate? It has been possible with my old HP Pavilion ze 5000.
  Maybe someone could explain to me?

  Thanks in advance!

  Hello

  As far as I know, this value is fixed and you cannot change it.
  Even if you update the driver, it is not possible to increase this setting on an internal display.

• Need some information on the Satellite A100-474 screen refresh rate

  Hello.
  Good time of day.

  I try install asp linux on my laptop. To configure X Windows I have to configure horizontal and vertical refresh of the screen (Toshiba TruBrite WXGA TFT).
  Any ideas how I can find these values?

  With respect and graditude, Raven.

  Hello

  Unfortunately, I found that the information the Satellite A100-474, which belongs to the PSAA9E series has been delivered with the 15.4 screen "and max. 1280 x 800 WXGA resolution.
  As far as I know it is developed by Samsung and it is a part number: LTN154X3-L06-H0A.

  Did you look in the user manual? I think that the manual provides some useful information under Schedule A; Technical characteristics.
  It should be for information about the video modes as the resolution of the CRT screen, color depth (bpp), and refresh rate (hz).

• Screen refresh rate

  Just so a while ago I tried to change my screen refresh rate so that a program can open properly because it seems always just for a fraction of a second, then stop again without any error message or anything like that. Then I did the standard thing we do when refresh rate of the screen: the screen resolution-> advanced settings-> monitor-> screen refresh rate. But there was a problem: the only option available is "default material use. Is there a way to get around this? I reinstalled Windows there are hoping to fix freezes - that worked 2 days only, and I'm not quite up-to-date with all the updates/drivers. Maybe that's a problem?

  Thank you

  S. Luca

  The driver for your graphics card must contain a 'Custom' option were you can set and test the different resolutions and refresh rates.

  Graphics/video drivers:
  Check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  J W Stuart: http://www.pagestart.com

• Screen refresh rate is not preserved between sessions

  I use a multi-screen configuration, and as I understand it, it is advisable to have all monitors to the same refresh rate (which makes sense). However, I have the main screen at 60 Hz, and after each reboot the secondary screen returns to 59hz. The screens are the same and I was able to reproduce the behavior on several graphics cards (Nvidia and ATI) with multiple monitors. Attributing to the display main 59Hz seems worth trying, but this option is not available. Someone has an idea?

  Hi Robert,.

  What is the brand and model of the secondary monitor?

  No action is necessary. This behavior is normal for monitors and TVs that are only 59,94 Hz but not 60 Hz. The 59Hz and 60 Hz are translated to 59,94 Hz until these values are sent to the driver. As a result, the screen is identical to 59Hz and 60 Hz.

  Some observers report a TV-compatibility of 59,94 Hz timing. Therefore, Windows 8 exposes the two frequencies, 59Hz and 60 Hz for each resolution supported at this time. The 59Hz parameter makes sure that a compatible TV timing is always available for an application such as Windows Media Center. The 60 Hz setting maintains compatibility for applications that expect to 60 Hz.

  Hope this information helps.

• How to change LCD on my Satellite A200-13R screen refresh rate?

  I really need your help guys, I bought the Satellite A200-13R, it has only 60 Hz refresh rate option, refresh rate of 60 Hz hurt my eyes and make me feel their combustion, 85 hz frequency never make me feel like, it's more comfortable for my eyes, but 85 Hz is not available in this satellite A200-13R is the graphics card Mobile Intel® 945GM Express Chipset

  I installed the latest drivers 4 this graphics... but still only 60 Hz option refresh rates available

  each of you know how 2 have 85 Hz refresh rate 2 use in this model

  I would be gratfull to have your help and I am glad 2 hove, some of you as a friend.

  Hello, my friend

  At first I try to understand your nickname, but unfortunately without success. Is there maybe a hidden message? ;)

  In any case, your ad is really amazing. LCD technology is truly the best for the eyes and the content is illustrated flicker. The old monitors refresh rate of 60 Hz was quite low and result flickered photo. Higher discount rates using the image was stilly and flicker.

  LCD technology is different and standard setting is 60 Hz. In my opinion you should speak with your family doctor. Maybe you need glasses when working on PC. I have some colleagues in my office who use glasses when working on PC.

  Bye and good luck!

• Increase the refresh rate of my LCD

  Hey Hey Hey. How to increase the available for my LCD refresh rate? Should I increase the refresh rate? I can't find where to change.

  The screen flashes? What is the refresh RRSP now? If you have set to 60 hz, it's ok.

• Portege M300-101 - every 30 min I get a BSOD

  I have a Portege M300-101 (Windows XP) and every 30 minutes I comes up with a blue screen with a text about 1 sec so I can't read it, then restarts and happen in 30 minutes

  Hello!

  It's not easy to say what are the causes of the problem, but as said Akuma, test the RAM with Memtest86.
  Download the image, burn it to a disc and start from it.

  Automatic restart, you can also disable in Windows.
  My computer-properties-Advanced online online => startup and recovery settings => remove the mark to restart automatically.

  Sometimes, this problem is caused by the HARD drive. You can test with the Test Drive for physical fitness.
  http://www.HitachiGST.com/HDD/support/download.htm#DFT

  Good bye

• Portege M300 - how to install driver LAN

  Hello

  I got a new hard drive put in my Portege M300 and managed to get the drivers all released on except the lan and a modem.
  I found the drivers here and make them, but which file do I use to install the application? ...
  I have one that says "PRO network driver uninstaller connections" but nothing obvious for amd installation... no files for directions...

  Any help appreciated.

  Thank you

  How to install the LAN driver?
  It is very easy, you can install it in the Device Manager.

  First of all, you need the correct LAN driver.
  You can find the Portege M300 on the Toshiba drivers European page driver-> * Archives *.

  After the LAN driver has been downloaded, you must unzip this package.
  Then go to Device Manager, select the unknown device (NIC) in the network adapters, select install or update the driver and follow the instructions on the screen.

  Welcome them

• Refresh rate of the external monitor (closed macbook) reset

  Hello

  Im very new to OS X, I have a macbook air 13 "that I have it plugged into my external monitor acer, when he was in closed mode (clamshell) I changed frequency by accident and now I can't change this back as the ' entry is not displayed. How can I change the refresh rate of the external monitor when the settings show only if the macbook is closed? As I said, I'm new so I am not very confident through many parameters, any help is appreciated.

  If you have previously enabled "Screen sharing" Preferences-> sharing system then you can use another Mac to control this Mac and change it to one that works remotely.

  You could 'open' the Mac to use its built-in screen and then be able to change the settings of the external monitor.

  You can try to reset the setting by following the steps listed here Re: how to restore the display settings

• Portege M300 & Dock display probs

  I have a Portege M300 in a Port Replicator III with keyboard, mouse, network and external screen, but cannot automatically do the output to the external screen after being away with the laptop. I have to lift the lid on the laptop, login and him then use the Fn + F5 util to switch to the external display only. If I turned off the laptop but do not remove the Port Replicator and then power save it keeps in memory the output settings and Ext screen very well.

  Can anyone help?

  Steven.

  Hello

  I don t see display problems. The fact is that the laptop can't switch on the external screen after unplugging the external monitor.
  The external monitor must connect to the laptop.