audio clips on slides

Similar Questions

• Duration of the slide show CS5 does not again refresh audio clip

  In a slide show, complete with 'Fit audio slideshow DURATION' checked (duration 00; 19; 32-24), I decided to replace the audio with a composition more short (00; 10; 00; 22). With the original audio clip erased and the new added audio clip and the 'slide show audio TIME Fit' checked, slide durations recalculated so that the last slide has a 00 exit point; 10; 00; 22 but the duration of the slide show is 'stuck' 00; 19; 32; 24. the end action takes place to return to the menu, but when the last slide goes black (at 00; 10; 00; 22) keeps him slide show running with a black screen, probably all the way to 00. 19; 32 24 before it hits the end action, even if I did not let it run again at this point. I shot 'Fit slideshow to audio duration' then turn it on again, in the hope that it will recalibrate at 00; 10; 00; 22, but the length does not change. Help, please!

  Try to play with these ideas:

  Uncheck "Fit to Audio duration slideshow."  (As you probably now it have anyway).

  On the slide show tab basic properties, set the duration of the slide to zero.  Now, what is the length of the slide show?  The length of the audio new or old?

  Or, something great (so I think that the total is more audio length) on the duration of the slide.  What is the length of the slide show?

  Search now "Fit slideshow / audio.  How long is it?

  I had the same symptom as you did (audio plays beyond the end of the blades) when the durations of slide added unless the audio length and 'Fit audio slideshow' was unchecked.

• An Audio Clip to multiple slides

  Hello
  
  I've been using Captivate for quite awhile now. During the days of Captivate 2, I could take an audio clip that has been lasts 10 seconds, for example, place it on a slide, set this slide to be long, 1 second during the execution of the project, the audio would play in the following slides. Basically, it made things easier when you were explaining a concept and want to have project type in a field at the same time.
  
  My problem is that I could not reach this Captivate 3. Is there an audio setting that I'm not aware?
  
  Any help would be greatly appreciated.
  
  Thank you!
  
  Doug

  Hi Doug

  The option must still exist. I remember well, it's one that you choose at the time wherever you insert the audio clip. Since you seem not to be seen, I guess that your audio clip is the same or less time than the slide where you want to insert. It is key, as the audio clip should be longer than the slide on which you are placing it in order to display the dialog box. In addition, the slide cannot be the single slide or the last slide. After all, if this is the case, there is no other slides to use.

  Thus, when you try to use audio as long as the slide, you should see a dialog box with three options. The option first (or higher) simply tells Captivate to set the slide duration to match the clip.
  The second (or middle) option tells Captivate to open a different dialog box allowing you to choose where the clip will break the next day however several slides. And the third (or low) option tells Captivate simply insert the clip, leave any single timing and let it break through the other slides where he's going.

  You can also talk the option to edit the schedule for the whole project. To display this dialog box in Captivate 3, click the Audio > Edit Timing > project. Once this dialog box appears, you have little sliders that allow you to adjust where the audio breaks through the slides.

  I hope something here has been helpful... Rick

• Quickly and easily adjust levels dB precisely when the heights of low audio clip using?

  Unless I use a height high enough audio clip, it is extremely tedious to achieve a specific level of dB.

  Is it possible to almost instantly making it easy to slip accurately when the height of the clamp is gray low?

  I know that I can in. the volume up and down by using ctrl - and ctrl = but when I do that I see not reassuring display of the confirmation of the dB level.

  Is it possible to this thumb upward or down while seeing the dB display?

  Ian, if you open the Audio pane of the Inspector and use these keyboard shortcuts to adjust, you see move the volume slider and DB digitally edit to the right of the cursor.

  Russ

  Edit: Insert the volume

• 8. do not allow me to move the markers of the slide in the audio editing of slides in Captivate

  Support - seems to work sometimes, but sometimes not. Today, not! I'm a software simulation. Then save auido to be distributed across multiple slides. But in the audio editor, says "you have reached the minimum display time" whenever I try to move the markers of slides! GRR! all solutions?

  Hello

  In the case of the image you provided, the audio itself seems to be long of 2.5 seconds. So Captivate you cannot change the slide duration to be shorter 2,5 seconds, because the associated audio video needs this time to complete. The only way to make this shorter slide is to edit the audio clip, so his is shorter.

  See you soon... Rick

• Best practices when it comes to insert audio to powerpoint slides

  I create a mix of slides with animations and software simulation projects in captivate.

  Currently, I have developed the audio files associated with objects of the PowerPoint slide animation. My question

  • Can I insert sound files in PowerPoint and change the timing of the animation based on the duration of the audio. I've been playing with editing and be too honest, I'm getting a little frustrated trying to synchronize.

  or

  • Can I insert the audio using Captivate after you import PowerPoint slides?

  Any help is appreciated.

  Concerning

  AJ

  All the audio clips will be stored in the library. Either from the library or by using the Audio Control Panel, you can edit audio clips directly in the hearing (part of the Adobe Creative, one of the best audio applications available cloud) and when recording that they are automatically edited in Captivate as well. Workflow even exists with Photoshop: you can modify a Photoshop source file, where Captivate will keep the layers wanted separate way images in the library, and you can modify of Captivate right away in Photoshop. Captivate integration with other Adobe applications is unique in the e-learning tools.

• Toggle audio on a slide background

  In Captivate 7, it was easy to find a setting to turn on or off background audio to individual slides. Where is this setting in Captivate 8?

  Jay,

  The option will appear in the Options on the slide tab, when you insert another audio clip. Limited to IMO, because you can read audio as a peak or an audio object action.

  

  I certainly journalisera it like a bug, because in CP7, it was possible to decide if the background sound is stopped even if there was no audio for this slide slide.

• How audio clips in Cp5 name?

  I'm their recording in Captivate, not Soundbooth.

  I would like to be able to see the name of the library easily.

  Thanks for Seattle.

  Alice

  Hi Alice,.

  Utilisation use the context menu in the library on the clip, choose Properties, and you can rename the audio clip. You can use the "find in a library" (CTRL-B) to locate the clip on a slide in the library

  Lilybiri

• Last approximately 10% of audio clips do not play

  My imported songs will not play the last 10% of the clip.  At first I thought it was a result of trying to use clips from 6 to 10 minutes of music, like 1-3 minutes titles seem to never fail, but could not find this same cut out all but the last minute of a long clip (do a 10 minute clip in a two minute clip) and try to use has resulted in his last 10% plays do not!

  The waveform for each audio clip is displayed in the Source tab and is fine.  But rub or play the clip works only until the point 90% and then sound becomes silent.  This is true to the Source drive or when the audio is inserted into the timeline.

  I have converted the original .m4a to mp3 and wma audio files, but always with the same result.  All the clips of converts play in QuickTime and WM player players, so it's something within Pro CS4 Prime Minister himself who is a failure.

  I tried everything I can think without results and have run out of ideas.

  Any suggestions, anyone?

  I would like to convert these source files to PCM/WAV 48 kHz 16-bit format and import it into the project. PrPro should love these files and you should have no problems. You must specify PrPro moments to conform to these files until you make slide them on the Timeline (progress bar for consistent standard in the bottom right of the GUI). It should take only moments with these files (duration and your system will dictate just how long), and you might not even see the progress bar.

  Good luck

  Hunt

  BTW - how you convert? Soundbooth or Audition can do easily, as well as free Audacity.

• Audio clip not ringing?

  I'm working in iMovie 11 OS 10.7.5.  I'm currently reviewing a film I did last year.  I needed to replace some of the imported videos.  These are originally midi clips I created in Garage Band and then became mp3s.  I put a couple of clips in the iMovie project, and they worked very well.

  But earlier, I imported a new clip and while he sits very well in the timeline (and I got the green sign that I was drag / drop '+'), it does not play!  In other words, everything seems as it should; but no sound when playback it travels.

  The noise occurs when I play the clip in iTunes, and it also works when I click the icon on the desktop of the clamp.  All other sounds in the movie play normally.  I checked all volume levels.

  Can someone help with this strange problem?  Thank you.

  Is it just the audio clip one who is affected?  (You don't cut accidentally the audio):

  

  or reduces the volume to zero.   It shows a waveform?

  Geoff.

• I have a problem with the content of spam. Somewhere in the Fox appeared script that's choking me audio spam. Every 30 minutes he's playing an audio clip that is malicious.

  Hello.
  I have a problem with the content of spam. Somewhere in the Fox appeared script that's choking me audio spam. Every 30 minutes he's playing an audio clip that is malicious. I can't find the settings as it eliminated. Now, I don't have any plug-ins and Add-ons strange that were not initially in the Fox, but the problem is there.
  I use the Fox years. The problem, he had 1.5 months after Fox cleaning. If the problem can't win, I'll be forced to give up the browser, and I wouldn't.

  Could test you mode without failure of Firefox? It is a standard diagnostic tool to disable some advanced features of Firefox and extensions. More info: questions to troubleshoot Firefox in Safe Mode.

  Does not work if Firefox: Hold down the SHIFT key when you start Firefox.

  If Firefox is running: You can restart Firefox in Mode safe mode using either:

  • button "3-bar" menu > "?" button > restart with disabled modules
  • Help menu > restart with disabled modules

  and OK reboot.

  Two scenarios: A small dialog box should appear. Click on 'Start mode safe' (not update).

  Any improvement?

  If the problem persists in Mode without failure, could reinstall you Firefox in this way:

  Clean reinstall it

  We use this name, but it isn't about deleting your settings, this is to ensure that the program, files are clean (not incompatible, corrupt or exotic code files). As described below, this process does not disrupt your existing settings. Don't uninstall NOT Firefox, that does not need.

  (1) download a fresh Installer for Firefox 38.0.5 of https://www.mozilla.org/firefox/all/ in an ideal location. (Scroll down your preferred language).

  (2) close Firefox (if applicable).

  (3) to rename the program folder, either:

  (Windows 64-bit folder names)

  C:\Program Files (x86)\Mozilla Firefox
  

  TO

  C:\Program Files (x86)\OldFirefox
  

  (Windows 32-bit folder names)

  C:\Program Files\Mozilla Firefox
  

  TO

  C:\Program Files\OldFirefox
  

  (4) run the installer you downloaded in the #1. It should automatically connect to your existing settings.

  Any improvement?

  Note: Some plugins can only exist in this OldFirefox file. If it is missing something essential, present in these files:

  • \OldFirefox\Plugins
  • \OldFirefox\browser\plugins

• Cut the beginning of the audio clip

  Hi all

  The music of music audio I am wanting to use a pause of a few seconds before it is actually.

  Is there some way I can adjust the audio clip, so I can get it to start bang on?

  I tried pulling on the handle on the side to shorten but he cut a small piece of audio, I just couldn't get it straight on the beginning of the peak of the wave.

  Any info would be great!

  «I tried pulling on the handle on the side to shorten but he cut a small piece of audio, I couldn't get it the opening of the vague law.»

  If you develop first the time scale of editing (shift cursor to the left of "Settings" to the right), you should then have segment extracted a very precise control.

  Geoff.

• audio clip WAV plays is not in Final Cut Pro (unless in the timeline)

  I have a few audio dialog recorded externally on syncing with my videos. It is in format wav 24-bit / 48 kHz. The problem is the audio clips will not play participate in event viewer so that I can revisit. To be more precise, when I hit the space bar the cursor moves along the clip, audio level indicators move up and down as if it is being read, but I have no audio output. However, if I drop the audio clip in the timeline panel, press space - it plays perfectly!

  Clues of what happens anyone?

  Thank you.

  10.2.3 FCPX

  Try to convert the audio 16 bit @48 kHz .aiff.

  The audio as it is, very probably turned in the Timeline to conform to the parameters of the project on the fly.

  Al

• Impossible to play the audio clips on the site. Click - page breaks.

  I'm playing the audio clips, sounds, dolphins (several sites) online site. Example: http://www.dolphinencounters.com/family-dolphinsounds.php#

  There is a small icon of ear for each clip. When I FIRST tried to read a clip, I got a "Quick Time plugin crashed" at the top of the page. Tried several times, same result.

  I went to TOOLS > OPTIONS > Applications tab. Given that I did not know what type of file format / clips have been, I found ALL the entries related to QuickTime and select the default setting or a different type of player. Restarted.

  When I tried this time, I still have collision warning. I double checked to make sure that QT all apps have gone and DISABLED by the plug-in page QT Extensions. Restarted.

  This time when I clicked on the icon of the ear, no sound is played, but the page pops up.

  Checked the settings/sound engineer. All OK. Updated QT for the last 7 and updated version to update system. No sound, no warning, page a few jumps.

  Other applications in the system plays its OK. Able to play videos in line with the sound. Just the noise / icon does not work.

  I would like to hear AND capture/download the sounds of dolphins. What is the problem with my system/FF 12.0? How can I fix it? How can I download?

  I tried to read the link to the icon to see the type of audio file, so I could access the issue more closely, but all links of clip are still with no recognized sound file format. Example: http://www.dolphinencounters.com/family-dolphinsounds.php#

  There are several elements on the page, but the links are all exactly as above.

  It has been long and there are probably several versions of FF as well as earlier versions of Windows, I remember listening and capture of the audio clips. Just do not remember how I did at the time.

  Win7 64 bit, 12.0 FF, QT 7 plug.

  It may be the prolongation of the QT interval, because the problem persists with all Applications QT, deleted or not, everything seems fine. No trainer, etc. No warning.

  I tried using IE and played clips, but WITHOUT my click the icon; they played just in overview. See still no way to capture or download and know that there is one somewhere.

  Hey ccorazza, you did so well with my last, have a curtain call repeat for this one? Thank you all.

  Hey, GreyWolf, sorry for the late reply. Didn't see your message until today.

  I was unable to get sound to play on this page too, but I got confused because it's an old version and I don't want to upgrade to the new version of QuickTime. But I'll test it on another PC with a Quicktime update.

  But after checking the file type, sounds, I see that they are .wav files. These files are usually played by Windows Media Player. So check to see if you can set the type of .wav file in the Tools > Options > Applications tab for Windows Media Player. Restart Firefox to see if the new change works.

  Also, I could find the urls for the files Dolphin audio so you can download them:

  • http://www.dolphinencounters.com/sounds/whistle.wav
  • http://www.dolphinencounters.com/sounds/motorbike.wav
  • http://www.dolphinencounters.com/sounds/yelling.wav
  • http://www.dolphinencounters.com/sounds/foghorn.wav
  • http://www.dolphinencounters.com/sounds/scream.wav
  • http://www.dolphinencounters.com/sounds/Raspberry.wav

  You should be able to make links a right-click and choose Save the link under.

  How I found the links was I clicked on some empty page and chose to view the Page Source. A new window opens, I searched the word whistle then I copied the sounds/whistler.wav of the url part and added to http://www.dolphinencounters.com/.

  What other sites you have the problem with? I try to take a look at those and see if I can find a better answer for why this is happening.

• Without my audio clip fade handles imported

  Import a clip of music for my FCPX project, but there are some on the audio clip fade handles. How can I melted in released. Thank you. Jun

  PPost a screenshot of what you see. Is clip appearances configured to display waveforms?