Audio device is disabled

Similar Questions

• Audio device is disabled. The audio device I've selected is currently disabled in Windows.

  I can't have my music/dictation for playback in my helmet. The audio device is a generic USB CJF helmet. I ran the diagnostic test of Microsoft on my audio playback and recording. The problem was not fixed, but has been reported as indicated above. "Audio device is disabled. The selected audio device is currently disabled in Windows.

  I need to fix this problem in order to transcribe the digital dictation. Can you please help?

  Joanne

  Hello

  My problem was corrected later. Thanks for all the views...

  Joanne

• Audio device is disabled - no not fixed

  It is an Inspiron 620 i620-229NBK Dektop PC with processor i3-2100.  The computer has simply stopped audio playback. Of headphones and speakers are unusable.  The speakers are standard hardware of Dell Factory packed and are USABLE (tested on another device).  -NO notice FIXED in the window of the utility, but without flaws are provided to explain the problem.  The audio driver is configured for speakers.  Is there a diagnostic test that can be run on the sound card?

  You can find a set of diagnostic tools in Dell Support Center. You can go to start-> type Dell Support Center-> press ENTER. Once opened, you perform PC Checkup, selectively for audio devices.

• audio device is disabled in windows

  Cannot get the sound of my Packard Bell Eastnote MZ36 other than when the headphones are connected.  Tried various solutions, i.e. diagnosis on computer has the sound card and embedded speakers are healthy, downloaded the latest player, etc..  When you use the Windows diagnostics I get the following comments: ' Windows Audio and Windows Audio Point final Buidler Services must run for the audio working properly. "  At least one of these services does not "."  But solutions or how to put right does not materialize.

  Check these for a fix:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-sound/sound-not-working/ea3a40d3-52a7-4EA8-8F32-7c17a144617a

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-sound/my-sound-stopped-working-after-a-Windows-7-upgrade/c8585c76-0bd0-445A-BC62-d281c0a5084d

  http://social.technet.Microsoft.com/forums/en-GB/w7itprohardware/thread/c57602ca-492e-44b5-88A5-8e5738861069

• How to reactivate my audio device for sound?

  NO SOUND. I get a message that the audio device is disabled in Windows (disabled audio device). How repairing I checked all connections.

  Original title: enablaudio device

  Open the Device Manager
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager

  Expand "Audio, video and game controllers", right click on the audio device (it must have an arrow pointing to the symbol-disabled people), in the context menu that appears click 'enable '. Alternatively, you can go to his Poperties tab Diver, the 'Activate' button should be active.

• How to activate audio device

  HOW CAN I ACTIVATE THE AUDIO DEVICE

  My audio device shows disable.  How to activate it

  Right-click on your audio icon in your toolbar and click on devices and reading in the main area made a right click and check the box that says see the disabled devices and you can click on the disabled device and activate it.

• Audio device does not. HP Pavilion dv6-6c50us

  My audio device is disabled. There is no sound two speakers and using earphones, how do I fix this please?  Product name: HP Pavilion dv6-6c50us product only. A6X90UA #ABA Windows 7 64-bit

  Try the system recovery... I just did and it worked! You need to restore your computer to an earlier time before the sound no longer works...  And you can do this by going to the control panel. Good luck!!!

• "No audio device is installed" error in my ACER aspire 5736z

  Original title:

  I don't know why it says no audio installed? I checked the Device Manager, I see that it works properly.

  Hello
   
  You did changes to the computer, before the show?
   
  Method 1:
   
  Check out the following link.
  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
   
  Method 2:
   
  Check if the audio device is disabled.
  a. right click on the volume icon and select playback devices.
  b. in the blank white click right and select the two Show disconnected devices / disabled.
  c. If the speaker is disabled, right click on it and Select it.
   
  Method 3:
   
  Download and install the latest audio drivers from the following link.
  http://support.Acer.com/product/default.aspx?modelId=3322

• Configure button disabled on the playback device, manage audio devices. How can I reactivate the button Configure?

  Hi, following an automatic update of Windows Vista 64-bit I have no sound. Thank you for that.   I had a similar problem before, the sound quality has been reduced to a rate lower than 16 bit 44.1 k.  I've changed this before clicking on the button configure on the playback device, manage audio devices.  But now, this button is disabled and I can't check the set up or make changes.  I am logged in as an administrator user, how to re - activate the button set up?

  Thank you

  Darren

  Hello, I have stopped the Windows Audio Service and rebooted a couple of times.  Now I have his back.

  Thank you

• I Accedently disable my high definition Audio Device and I cannot get it back

  I Accedently disable my high definition Audio Device and I cannot get it back. IDK what to do but I do not see how to reactivate it.

  Hi MarkRampone,

  Thank you for posting in the Microsoft Community, where you can find all the answers related to Windows. It seems that you have disabled the Audio device high definition and you must activate it.

  In addition to answering these questions that would help us provide a better solution:

  1. How did did you disable the Audio device high definition?

  2. What is the brand and model of the computer you're using?

  Try the steps mentioned in this link and check:

  No sound in Windows
  http://Windows.Microsoft.com/en-in/Windows/no-sound-help#no-sound=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1
   

  Hope this information helps. If you have any other questions feel free to respond and we would be happy to help.

• Audio device plays boring loop forever, even if disabled.

  Hello

  I had a problem on multiple computers, Windows 7 & 8, where sometimes if a program crashes or is not closed correctly, the audio device that used the program will continuously play a short segment (maybe a tenth of a second) audio in an endless loop, until the computer is restarted.
  The only other way to cut noise is to transform the master up to 0 volume slider. We have tried to disable the audio device, but oddly the sound would still play so THAT the device has been DISABLED. Hibernation and then wake the computer also has not resolved the problem, even if it turns off virtually everything. This makes it appear as a driver issue, as RAM is the only thing preserved through hibernation.
  Is there a way to reset the driver somehow to make this problem go away? Or is there another solution here?
  Thank you!
  -Steve

  I found how to solve the problem on mine:

  1. go to: Control Panel > hardware and sound > manage Audio devices
  2. Select the annoying audio device, and then click Properties.
  3. click on properties under the controller information.
  4. click on change settings.
  5. Select the driver tab and then click on disable. Press Yes when asked for confirmation.
  6. then press Activate.

• I get a message that my audio device is not working. It worked fine the other day. Is it possible that something has been disabled?

  How can I check my audio device?

  Hello Charlotte T.

  Thank you for your message.  Nothing has changed recently to include the hardware, software or updates?  If your device has been working a few days previously, you can perform a system restore.  Click HERE for the system restore instructions.  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• now everytime I open LPX he again analyze the audio devices

  Hi all

  LPX last...

  now - everytime I open LPX he again analyzing audio devices - again and again...

  How can I do to don't forget and stop doing every time?

  He never come back and say that something is not verifiable?

  To do this, go to Logic Pro X menu, preferences, to the Plugin Manager.

  Click Show all the top left selection.

  Click on the button "Reset & Rescan Selection" at the bottom.

  Scroll down the list when it's done and see if in the 'Compatibility' column if anything incompatible lists or failed.

  If so, click on the "disable failed Audio Units" button at the bottom left.

• AMD high definition Audio Device not Plugged In (HP Pavilion dv6-6b09sa)

  I just started my laptop HP Pavilion dv6-6b09sa (running on Windows 7) to find that the sound icon is a red cross next to him and he claims that "no speakers or headphones are connected. In Control Panel, it says that the AMD high definition Audio Device is not plugged in.

  As far as I know, I did nothing to cause this.

  I have already tried:

  Restore the system to yesterday at 22:00.

  Instalation of a TDI driver on the HP website, but I don't know how to disable/change/remove the old driver. I am completely ignorant of these things.

  Please help, I am at a total loss.

  Hello

  You are welcome

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp54001-54500/sp54400.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When finished, restart the computer and let Windows load completely.  Open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K

• No Audio device

  I use a desktop Pavilion a1587c with XP Media Editon computer.

  I just installed a NVIDIA GeForce 640 video card to replace the origional dead card.

  It seems that audio HDMI card caused my card onboard Realtek HD audio stop.  I have no sound, the speaker in the taskbar icon has disappeared, and the page of sounds and Audio devices says no Audio device.  In Device Manager, under sound video and game controllers it appears as unknown.  The Device Manager also shows that no driver is installed.

  I disabled the audio part of the NVIDIA card and tried to restore my audio card, without success.

  Restoration of the pilot indicates that he has re-installed the driver, but it still does not work and no driver show in Device Manager.

  I downloaded the drivers from the HP site, but trying to install gives me a BSOD and instant reboot.

  Help!

  Go into the BIOS and enable the audio embedded.