Audio device on TV used as monitor is blocked

Similar Questions

• Audio device is in use by another application

  As the title suggests, however,

  I tried to reboot Windows Audio,

  I have uninstalled and reinstalled my Audio drivers

  no other programs try to use the speakers on my TV,

  forcing audio to play through my TV (extinguish all alternative audio devices) causes a blue screen.

  also restarted several times in attempts to solve the problem.

  P.S. the sound is read by all the other outputs such as helmet, it's only my TV speakers that cause the blue screen and do not accept the sounds. It is an older model of the Sony Bravia.

  Hello

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the question and your efforts to resolve.

  This problem can occur because the parameters or corrupted audio drivers.

  I suggest you run game audio troubleshooter and check if that helps.
  Reference:
  Open the troubleshooting of Audio playback
  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  If this does not help, try to reinstall the drivers audio in compatibility mode and check the issue.

  See this link provided by Ronnie Vernon.
  HOW to: Install a hardware device using the Compatibility Mode driver
  https://social.technet.Microsoft.com/forums/Windows/en-us/80cae5ee-dc98-4A2F-8284-a1ab826059b7/how-to-install-a-hardware-device-driver-using-compatibility-mode?Forum=w7itprohardware

  Additional information:

  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows/tips-fixing-common-sound-problems#tips-fixing-common-sound-

  problems = windows-7

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• audio device problem in use?

  Sometimes my audio does not work so I test. Then it shows the warning message "the device is used by another application. Please close any device that plays audio on this device, and then try again. "How this happen?

  Hello

  Try the following.

  Open windows control panel, open Windows Update, select "View update history" in the left pane and then select "Installed updates" link in the next window.

  Locate the KB2962407 update, right click and choose uninstall.  Once completed, restart the computer, open windows control panel, open Windows Update and select "Check for updates".  You will see the update that you have uninstalled just offered once again - right click and select "Hide update".

  After that you may or may not need to remove and reload the sound driver - if you do, how to use Recovery Manager to reinstall the drivers and software is detailed in the document at the link below.

  Recovery Manager - Windows 8.

  Kind regards

  DP - K

• A program to choose which audio device uses

  I saw the same question asked and asked and on many different forums with many different responses, most of which don't really know what was the real problem.
  
  Is there a way to get the Application use Audio Device 1 and get B asks to use Audio Device 2?

  Before people will tell me how to tell what Audio device to use Windows Media Player or VLC, I KNOW!  It does not help a bit.

  I want to be able to do if the two Application A AND B of the application don't have the ability to select which sound device they use.

  I am running Win 7 64 bit. I have a 5.1 speakers connected to my onboard sound and I have my TV connected to the HDMI connector on my graphics card.

  What I want to achieve is to have the sound of the game I play to get out of my speakers, and the sound for the film I'm streaming come on my TV.
   
  I have not yet found an option in IE, Firefox, every night (64 bit Firefox) or Chrome that allows me to use what audio device they use. Not one that would be important they use other applications like Flash Player or Silverlight to stream the video, or which have an option to choose which audio device they use, although oddly enough I found an option to select what mic was used on a single program...

  The programmers of these two Star Wars: The Old Republic and The Secret World, (the two games I play right now) have neglected to include the ability to choose which Audio device they use in the games options.

  I came across a post suggesting IndieVolume, I thought "Great, the answer to my prayers!", I downloaded the trial version to see if it would work. Installed, open it, looked at GUI, set up... Nothing has changed, did not work.

  There must be a way to do it built-in to Windows or that you would not get the option to select which audio device WMP can use.

  I would have liked to be able to do this easily in Windows 7, because after all was not Windows 7 supposed to be all about doing things you want to do with your PC, so much easier to do? I wish more programmers to understand that it is really necessary for the choice of the audio playback device in their games.

  Until these times there at - it anyone out there that can suggest a program or something that will help reach my goal? Or a way to do within Windows?

  IE and Silverlight are the two Microsoft but they don't give you the option.

  There must be programming in Windows to do can you supposed to have a reading of default communication as a standard device. Surely, that works on the same principle, with various programs that will be run, get recognized by windows as a program of communication and see their directed audio output in an appropriate manner.

  Is there a way to access which programs windows recognizes as a communications program and adding to the list manually?

  Force windows to think that request is a communication program and get the result of requests, the value 1 of Audio device which is defined as the "default communication device".

  Leave the Application B crossing 2 Audio device which is defined as the "Default Device".

• DirectSound: program crashes on IDirectSoundCaptureBuffer_Release only on the USB audio devices

  Hi, this is a copy of

  https://Bugzilla.gnome.org/show_bug.cgi?id=763322

  basically: sometimes windows IDirectSoundCaptureBuffer_Release method hangs forever or until I unplug all audio device that is used.

  Occurs only with devices usb and direct its api. Tried with windows 7 latest version of different PCs.

  Does anyone know how to get more information, help, correction...

  Stack trace:

  wow64cpu.dll!CpupSyscallStub+0x9
  wow64cpu.dll!WaitForMultipleObjects32+0x3b
  wow64.dll!RunCpuSimulation+0xa
  wow64.dll!Wow64LdrpInitialize+0x429
  ntdll.dll!??_C@_0BN@KLOBBEB@Enabling?5heap?5debug?5options?6?$AA@FNODOBFM@+0x29364
  ntdll.dll!LdrInitializeThunk+0xe
  ntdll.dll!_ZwWaitForMultipleObjects@20+0x15
  kernel32.dll!_WaitForMultipleObjectsExImplementation@20+0xe0
  kernel32.dll!_WaitForMultipleObjects@16+0x18
  dsound.dll!?LockOrEvent@CMutexLock@@QAEHPAX@Z+0x22
  dsound.dll!?TpEnterDllMutex@CThread@@IAEHXZ+0x22
  dsound.dll!?HandleFocusChange@CDirectSoundAdministrator@@AAEXXZ+0x2c
  dsound.dll!?UpdateGlobalFocusState@CDirectSoundAdministrator@@QAEXH@Z+0x6e
  dsound.dll!?ThreadProc@CDirectSoundAdministrator@@EAEJXZ+0x37
  dsound.dll!?ThreadLoop@CThread@@IAEJXZ+0x1d
  dsound.dll!?PrivateThreadProc@CThread@@AAEJXZ+0x32
  dsound.dll!?ThreadStartRoutine@CThread@@CGKPAX@Z+0xd
  kernel32.dll!@BaseThreadInitThunk@12+0xe
  ntdll.dll!___RtlUserThreadStart@8+0x70
  ntdll.dll!__RtlUserThreadStart@8+0x1b
  

  Hi Thomas,

  For this particular question, I suggest you post your query on the MSDN Web site at the link below:

  http://social.msdn.Microsoft.com/forums/en-us/home?category=windowsdesktopdev

  For more information, you can follow the link below:

  https://msdn.Microsoft.com/en-us/library/Windows/desktop/ee416960%28V=vs.85%29.aspx?f=255&MSPPError=-2147217396

  Thank you.

• audio device not supported Mac 6.1

  I just spent some time on telephone support to adobe tent to solve a problem, but only had a half fix.  I get an error of an audio device not supported on my Mac 6.1.  Nothing would in return play, I tried several fixes online, switching equipment, etc., but he was always pushing an error in audio device not supported (using audio devices in the Mac).  The problem was bypassed, then when we were able to create a global audio device that uses a webcam logitech for a microphone input and audio built-in for output.  Now I was getting sound and the guy said that the problem has been completely resolved and I'm good to go.  So I start to play my audio to the rear, and while it does not play back audio, he locked not able to go up to 44.1 Khz or 48 kHz 16 kHz.  Once I tried to remove the logitech camera is a no go once again.

  Everyone knows about this problem with the latest OSx and CC2015 Premiere Pro?  Is there a solution?  Also, we went in the Library preferences and renamed the 9.0 folder so that it created a new file, preferably without success on PR. (although it has fixed hearing).

  Tried with bars and tone as well as with images.

  Thanks in advance!

  To be more precise, it gave the following error:

  "The device settings could not be applied because the following error occurred:

  The sampling frequency is not supported by the current audio device.

  The last valid device settings will be used.

  SOLUTION

  I just removed my Logitech camera on the computer, and all of a sudden, it works like a charm...  Clogged again and it wouldn't work... unplugged it and it worked again. It seems that if no input is available, output cannot exceed the rate of sample entries (perhaps because of the recording VO feature?  Whatever it is, that fixed it.  If anyone has this problem before they fix it, I hope this will help them.

• We get an error "no audio device is installed" as he tried to use the cable from the monitor to TV

  * Original title: vista home version lost his

  Recently bought an Emerson TV that is has a PC plug. Hooked to the TV for the monitor cable and bought a mini audio cable with one end plugs into the speaker jack the rear of the computer and the other end of this cable is divided into a red RCA plug and a white RCA connector to the audio on the TV.

  Played a movie and it displays fine but I have no sound. So everything disconnected and hooked my computer following up and my external computer speakers back up exactly as it was before still have no sound.

  in the toolbar at the bottom right hand of the screen, the "speaker" icon displays red X and when I move my mouse jumper on it the message appears "no audio device is installed".

  Help!

  Jerry Fulkerson

  Hello

  You can first check in BIOS advanced settings if the onboard sound is enabled.

  You can see the manual of the system manufacturer or contact the system manufacturer for more information on how to make the changes in the BIOS.

  Note: changes to the BIOS/complementary metal oxide semiconductor (CMOS) settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Please follow the steps below and we update with the results.

  Method 1: Follow the steps in the following article and check.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

   

  Method 2: Update a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  Let us know if it helps!

• I have no sound at all. I went to audio devices and it shows that I have no audio device and on each tab, I can't click on anything? IM using windows xp professional

  I have no sound at all.  I went to audio devices and it shows that I have no audio device and on each tab, I can't click on anything? IM using windows xp professional

  Looks like you ended up with a corrupted sndvol32.exe on your computer. This requires usually restore it from your disk system recovery or a recovery hard disk volume. He will have to type a few commands in the command line. Follow the detailed tutorial here to solve the problem of the Windows Volume control program is not installed.

  Some specific command line steps that require you to know exactly which drive is your recovery partition, then you won't be able to copy and paste the article orders, but the steps will get you to the solution.

• DirectSound resources such as the level of priority were already in use by an other appellant - have no sound - no audio device

  DirectSound resources such as the level of priority were already in use by an other appellant - have no sound - no audio device

  Hi CindySantonas,

  ·         You have made any changes recently?

  This problem can occur if your sound card is not configured in the Panel as default device for sound playback.

  Method 1: Follow the below mentioned article and see if it helps.

  Sounds may not play in programs and you receive an error message "0x8878000a" in the DirectX Diagnostic tool in Windows XP, Windows 2000, or Windows Millennium Edition

  Method 2: Run automated troubleshooting and check if it helps.

  Diagnose and automatically repair audio playback problems

• WMP11 XP (11.05721.5280) do NOT use the audio device as the default

  I put WMP to use the default device: -.

  WMP\Tools\options\Devices\speakers\properties\sound playback\default live sound and also tried setting to refer directly to the sound card.

  BUT WMP reads through the integrated sound card.

  Other programs for example 2 WMplayer, Quicktime Player, and Cakewalk Home Studio all use properly the default playback device.

  Read in the past THAT WMP has used the default device - stopped doing this a few months back

  The default device is set to the sound card via ControlPanel\Sounds and Audio devices

  Thank you, Meghmala for having responded to my message.

  After validation, I found that WMP plays through the on-board sound. Other programs via the sound card.

  I went through all combinations of card Onboard Sound and sound to the default playback device (read options\Devices\speakers\properties\sound ControlPanel\Sounds and peripheral Audio and WMP.

  WMP always uses the device specified via its Outils\Options.

  It wasn't the behavior that I noted in my post? fixed by restarting?

  I noticed that WMP does not take into account default value specified in the Panel\Sounds control and peripheral Audioeven if control Panel\Sounds and Audio devices specifies "use only default devices"!

  To sum up, I can now put the reading that I need.

  This message can be now closed!

  Thank you.

• When I try to use Media player 11 or try to use live food of internet radio, I get nothing. When I search through the settings, I met a screen that says "no audio device".

  Original title: ideas: insert an error code or give a brief description of what you're trying to accomplish or difficult. _

  When I try to use Media player 11 or try to use live food of internet radio, I get nothing.  When I search through the settings, I met a screen that say, 'no audio device '.  I tried to update my card sound and nothing.

  Your help will be greatly appreciated.  If so, ask me questions and I will answer.

  Gary kenny

  theflyingelk

  (Number removed for privacy)
  

  (Email removed for privacy)
  

  Hi gary kenny,.
  1. when the question is is produced?
  2. the issue of 'No audio' intervene on other applications as well?
  3. What is the brand and model of your computer?
   
  Follow the steps and check if they help.
   
  Step 1:
   
  If you have HP and Compaq Windows XP computers, you can follow the steps mentioned in the article.
   
  No Audio in Windows XP device
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01427349&cc=us&DLC=en&LC=en
   
  Step 2:
   
  Or, you can uninstall and reinstall the sound drivers.
   
  a. click on START
  b. click Control Panel.
   
  You should have a few icons to come.
  If you do not, you must make sure that you have enabled the classic view.
   
  Locate the control panel option, it will be on the left side.
  Once activated the classic view
   
  Follow the rest of my instructions.
   
  c. click Device Manager
  d. sounds > search for your sound card (if you are not sure that your sound card is, post options and I'll tell you that one.)
  e. Note description brand / model, double-click on it, go to the tab drivers, note the version.
  f. make a right click on it and UNINSTALL it and restart the computer it will rebuild the driver stack.
  g. go to the manufacturers website and find the latest driver for your card download. (You must know the name of the sound card, if you wrote down from the above info), when you find it download: SAVE IT DO NOT HIT RUN (save it on your desktop for easy access.
  h. open the file that you have saved and right-click on it and select RUN AS ADMINISTRATOR(Now install it.). REBOOT after each installation of driver.
   
  Step 3:
   
  Sound drivers often rollback, so check that the version you just installed is always there. If not, the driver to keep until it sticks, it really shouldn't take more than three times
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Using the USB audio device as default instead of analog audio ports

  Audio microphone USB installs and is listed in the devices under sound, video and portable with Dell computer game controller devices running Windows Vista, but the problems the system to use the USB mic as the default.  The sound devices list has also IDT HD audio codecs indicated, and the system will analog as the default input channels for the microphone, with no way to install the USB device.  Is it possible to put the USB audio as default microphone device?

  Hello RSA 456,.

  Many sound problems are caused by hardware that is not configured correctly. We will check your sound card, connect the cables in the correct locations, ensuring that the material has the power and the verification of the volume.
  Please follow the method described below to solve the problems.
  Method 1:

  1. plug your USB microphone.
  2. the LED will light to indicate that it is powered USB.
  3. Windows will automatically detect the USB Audio device and install the universal drivers.
  4. to set up your microphone as default device USB Open Control Panel.
  5. Select display as a classic view of your control panel, then select Select Sound.
  6. click on the recording tab. Here your USB Microphone will be listed.
  7. click on the USB microphone. If there is no checkmark beside the USB Microphone, click on set as default.
  8. the default device is used in most programs such as tape recorder simple registration.

  Method 2:
  Please click the link below to check how to check if the hardware works just fine.
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows?T1=tab02

  Kind regards
  Sooraj.S

• E1505 - no 'No Audio Device Found"even though I used my microphone before

  have had my E1505 with Vista OS laptop for over a year now and have always used an external microphone. From a few days back, the laptop does not recognize the microphone more. I tried several microphones and even used a brand new. Finally made a full diagnosis using the Dell diagnostics and during Diagnostics, I tested with the same microphone and the computer meets the test. However, when I close diagnostics and log back in, the computer still isn't allowing me to use the microphone. When I insert the microphone, the audio event message appears to indicate that an audio device has started. However, when I go to sound recorder, the record tab shows no audio device found.

  I just upgraded to SP 1 and hope there is a bug and MS can fix it, but no luck.

  Everyone ran in this unit or a similar problem? Any help is appreciated.

  
  

• CS6 will not accept my microphone condensed declaring; "sampole entry rate and output do not match.  Audio cannot be recorded until this problem is corrected.  Use the appropriate operating system or control panel of audio device to adjust the sampling ra

  !

  The first things we need to know in order to be able to help are what are your operating system and the audio device?

  Also the FAQ setting the frequency sampling in Windows Vista and 7 can help.

• Switch Audio device without rebooting between computer and TV.

  Switch Audio device without rebooting

  Hello

  I have a HD TV hooked like a monitor to my desktop via a HDMI cable to a HD video card. The video works wonderfully, but for some reason, the sound goes is more easily. I used to be able to simply change the audio output on the computer to the HDMI output rear speakers and restart the program to get a sound through the TV. Now, I have to restart my computer everytime I spend to make it work. It works but I would like to be able to switch back without rebooting.

  Can anyone help? I don't know what happened, he used to work without a reboot and now does not work. This happened some time ago, if I'm afraid, I can't give any details about what caused it.

  Thank you!

  Hi Cameling,

  I suggest that you update the latest audio drivers for your computer. You can log the support site of the manufacturer to do so.