Audio device is in use by another application

Similar Questions

• No sound - "device is used by another application.

  The sound of my Inspiron 5523 often does not work (although sometimes it does). It seems to work after the start, but after that I play a .wav using Windows Media Player sound file stops working.

  This time, with his works do not, I clicked on the speaker icon in the taskbar, click playback devices, right click on speaker/headphones (which is reported as peripheral by default) and you click Test. I received the following message:

  "The device is used by another application. Please close all applications all devices that are audio playback on this device and then try again. »

  I don't know how to solve this problem. Can you help me?

  Thank you very much.

  I suggest you

  > Reinstall the audio driver IDT since the page downloads 5523 15z. Make sure you first select your operating system.

  > if it does not help install the native Windows audio driver. See this thread for instructions.

  > If it does not help perform a System Recovery.

  > If it does not help, contact technical support for warranty repair.

• No sound through speakers, error message "the device is used by another application.

  Original title: no sound

  I'm on Windows 8. My speakers do not work, but when I run the test properties, I get a pop up message saying "the camera is used by another application" audio drivers are in good condition and I have not noticed any other application playing, can someone help me on this please...

  Hello

  Thanks for the reply with an up-to-date issue report.

  Have you tried installing the latest audio driver on the computer manufacturer website? If this isn't the case, please try these steps and we keep up to date on the State of the question. I'll be happy to help you.

  Check out the link for more information.

  http://www.Dell.com/support/home/us/en/19/product-support/product/Inspiron-15R-n5110/drivers

• audio device problem in use?

  Sometimes my audio does not work so I test. Then it shows the warning message "the device is used by another application. Please close any device that plays audio on this device, and then try again. "How this happen?

  Hello

  Try the following.

  Open windows control panel, open Windows Update, select "View update history" in the left pane and then select "Installed updates" link in the next window.

  Locate the KB2962407 update, right click and choose uninstall.  Once completed, restart the computer, open windows control panel, open Windows Update and select "Check for updates".  You will see the update that you have uninstalled just offered once again - right click and select "Hide update".

  After that you may or may not need to remove and reload the sound driver - if you do, how to use Recovery Manager to reinstall the drivers and software is detailed in the document at the link below.

  Recovery Manager - Windows 8.

  Kind regards

  DP - K

• 8 casual Windows no noise problems. The camera is used by another application.

  Hello
  I had sound problems with the speakers on an HP Ultrabook running Windows 8. Sometimes the laptop speakers stop working. When this happens, I go to control panel > sound, speakers (one set to select), select Configuration and Test. After selecting the Test, I get the message device in use. The camera is used by another application. Please close all units are audio playback on this device, and then try again. I went to the properties for the speakers, the Advanced tab and unchecked option "allow applications to take exclusive control of this device." I also used the term sndvol to try to determine the application, but it only shows the device: speakers / HP and Applications: System sounds.

  The only way I could get the speakers to work is to restart or turn off and turn on the pilot for the IDT High Definition Audio CODEC. Does anyone know how to determine the application causing the problem? Thanks in advance for your help.

  Gary

  On the forum of the community of HP HP technician found that uninstalling Microsoft update KB2962407 should solve the problem.  This update is a patch that says "shortened battery life when an inactive audio device is not turned off on a computer running Windows.  I installed this update on June 19.  I have no updates installed July, so uninstall updates July cannot solve the problem.

• Logitech webcam M/N VUBE-43is in use by another application and I cannot connect to it

  I have a webcam logitech M/N VUBE-43, I used it on this computer gateway DX441S with windows vista family premium, but now I cannot CONNECT to THE CAMERA.

  The error MESSAGE IS: WEBCAM IS in USE BY ANOTHER APPLICATION! ANOTHER APPLICATION OF WINDOWS VISTA COULD INDICATE TO THIS MESSAGE, AND HOW DO I REMOVE THE BLOCK! Thank you

  Hello the South Georgia Farmer,

  If you go into the Task Manager you see all processes running that could be using the webcam, like MSN messenger or Skype? If so, then finish the process for MSN and then see if you can use your Webcam. Also other programs that may be using the Webcam can have left handles opened to the webcam.

  I check and update the webcam in Device Manager.
  -Control Panel > System Maintenance > Device Manager
  -Go to Imaging and made devices 'Logitech Camera' right click and choose "update driver software".
  -Click on "automatically search for an updated driver.
  S ' it automatically finds none, then choose 'Browse my computer for driver software' and
  "Let me pick from a list." Find your webcam version and update.
  -Restart your computer.

  Now check and see if you still get the error. If so, my next recommendation would be to contact Logitech for help.

  Please answer back with an update on this issue.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• webcam in use by another application

  on a PC with a chicony stelite toshiba laptop built in webcam I can't use the camera - I get the message "camera in use by another application".
  I tried to delete the driver for the camera in Device Manager, but cannot get rid of it.
  I installed a logitech c200 webcam but it's software gives the same message.
  does anyone know how to get rid of the software/drivers chicony etc once and for all?
  How can I find out which application is using the camera?

  Hello

  It is probably locked by another application such as a Messenger or Skype program as some
  do not release the control once they have been executed.

  Try to restart and access the camera.

  To disable the onboard WebCam - Panel - device - Imaging Devices Manager-
  Right-click on the WebCam - disable

  Check with Toshiba Support, online documentation and drivers (update or reinstall).
  and their forums.

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  =====================================

  To correct what is interfering:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Objects of process Explorer - free - find out what files, registry keys and other processes
  have open, which DLLs they have loaded and more. This exceptionally effective utility will be
  even show you who owns each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured so that it starts automatically when your
  system boots and you log in. Autoruns shows you the complete list of files and registry locations
  where applications can configure Auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• port used by another application

  Hi-

  I know that this problem has been posted before about a have people, but when I read the messages and responses, I just get twisted into a pretzel trying to follow links and messages and suggestions that all seem to lead me in all directions. Sorry, but I just get really confused. I tried to do an online chat with a representative of Palm, but the login screen keeps repeating to me again and again for me to fill out my name and repeated info and I seem to be able to connect to their chat agent.

  So here I am. Here's my situation:

  Handheld Tungsten E2 cannot sync via bluetooth to my Windows 7 laptop. I use OS 4.1.4 because screens of download for most recent versions say that they do not work with Windows 7. Also a Palm representative told me that, too. I have synced with great success, through bluetooth, this fall, but have recently undergone a laptop crash, then a breakdown of your handheld. (What a month this has been!) They have all both been fixed but sync seems to no longer work.

  • I have Bluetooth activated and configured as detectable on the handheld.
  • My Bluetooth devices are listed as working in my Windows 7 Device Manager.
  • My Hotsync manager is enabled.
  • I tried setting series and also to the network via the Hotsync Manager in the system tray. No matter what I click in the Hotsync Manager list, I get a message telling me that the Com1 port is not available but the Hotsync Manager will open the port when it becomes available. This, of course, never comes to pass.
  • When I attempt a Hotsync, I'm unable to connect and get the message on my pocket computer that the port is in use by another application.

  Help, please. And please keep it as simple as possible.

  Thanks a LOT-.

  BWalker

  Hello!

  If the reason to use Palm Desktop 4.1.4 are just compatibility concerns then please use 6.2.2.  Palm Desktop 6.2.2 version compatible for Windows 7, especially due to changes MS made 3rd party app data saved.  First of all uninstall PDT 4.1.4 and then install PDT 6.2.2.  This version of Palm Desktop, wouldn't you go through the grind to determine which COM port to use also.  In hotsync Manager, go to connections and check bluetooth.

  After that, go through the process parring on the PC to match the Tungsten E2 again.  HotSync should work correctly this time.

  Just a note that if you use a USB bluetooth dongle sometimes to restart you have to just get out of the hotsync Manager and reopen since Windows could change COM ports on USB devices.

• Satellite A200 webcam is used by another application

  After a few seconds when I have turned on-camera web on my Satellite A200, it stop working and displaying the message "used by another application. Is there any officially recommended by TOSHIBA method to decide this problem?

  This was very often discussed here in this forum. If please use advanced search option and put in use by another application as search terms.

  Number of threads is listed as the search result. Will you please check and I hope that you will find answer how to properly use the webcam.

  Bye and good lock!

• IR hotsync problem: "because the port is in use by another application."

  I finally got my system operation.  Sony Clie TJ - 25 pda, Palm Desktop 4.1, Windows 7 64 bit.  Very delicate balance.  I failed to install the new software released by aceeca.  I finally got it by infrared hotsync.  Several times.

  Now, today, I get the message on the Clie: "could not start the hotsync operation because the port is in use by another application."

  I saw this thread and in fact ensure that the transfer of images using a digital camera box is unchecked.  It still does not.  The icon hotsync in the lower right part of the screen, when I check that IR is checked, nothing else is.  It still does not.

  Thoughts?  Ideas?  Suggestions?

  Cidercat I had this happen to me with bluetooth hotsync before. I listen to radio, transfer files and surf the web with bluetooth. I could solve the problem by turning off the bluetooth, then turn it back on. Sometimes a warm reboot might also work. I came across a free application for the Palm tree named NetworkDown. It closes completely all active sessions down. You type right on the icon to run it. It works on my TX.

  http://www.metaviewsoft.de/en/software/PalmOS/freeware/other/NetworkDown.PRC

• I can't start video on Skype as they say, that it is used by another application?

  When I connect to Skype with a video call, I get a message saying that your camera is used by another application, what can I do?

  [Moved from comments]

  Hello

  Work through these positions;

  http://community.Skype.com/T5/forums/SearchPage/tab/message?q=video+is+in+use+by+another+program

  Support Skype homepage

  https://support.Skype.com/en/

  Hope this helps,

  Don

• I can't install service pack 3, I get an error that ntkrnlpa.exe is in use by another application

  I search on the forum and found that another user had the same problem but nobody answered.

  What happened is that I had a few viruses that my computer shuts down completely.  I have simply no money to buy or update of protection against the virus at the moment.  So, my computer crashed.  Then I had to use my system restore disks to restore my computer.  Then, after that I restored my computer now goes to the blue screen and scans files each time.  At the end of the list is a message: unable to write to the boot sector (according to me, it is said).

  Then I accidentally downloaded a virus.  He was disguised as a MS program and was called FixIt.  I couldn't get down there and he asked for credit card information.  I don't give any information and was able to use a browser to display the McAfee, then remove.  Then I used Malwarebytes to remove some other virus.  Not knowing what else to do, I tried to defrag and received an error message that my C: drive has been corrupted.

  My CD Player no longer works and my computer has problems.  I thought that if I downloaded the FixIt problem, it could solve some of the problems it is to have my computer.  It won't work because I have not installed Service Pack 3.

  When I try to intall Service Pack 3, it extracts files and brings me to setupwizard and then gets up to a certain point, and I get an error message as follows:

  c:\windows\system32\ntkrnlpa.exe file is open or in use by another application.

  I don't know what else to do.  I have everything turned off.  I tried to download and save to my desktop and it still won't work.

  Any help would be greatly appreciated!

  When I ran Process Explorer, I have disabled this file ntkrnlpa.exe.  I couldn't tell what was using this file - but I got the Google Redirect virus, so I thought that a virus has access to this file and prevents me from doing anything.  I don't know if that was the case, it was just my guess that it was what was going on.

  It worked for me.  It temporarily disables this file and then you can install Service Pack 3.

  I received instructions on my site quietfish.ca if you want to check.

• my xp media center 2005 gives an error "the video decoder is currentley in progress for use by another application"

  my xp media center 2005.

  whenever I try to use my media center ' video decoder is currentley in use by another application close all applications and restart the Media Center»

  I have no other programs running and have no idea what as happened to create this problem

  Suggestions: -.

  1] uninstall and reinstall the video decoder.

  If the above does not help, then

  2] uninstall and reinstall the tv tuner card driver. Visit the manufacturer's Web site to download and install the latest compatible driver.

• Media Center message ' decoder is used by another application "after Windows XP update

  After updating windows xp on my Dell xps 400, I can't watch live TV or record TV.

  I get a message that the decoder is in use by another application.  I have run the decoder checkup utility video and that shows incompatibility.  Nothing on this computer has changed except the XP updated.

  .NET framework 1.1:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=262D25E3-F589-4842-8157-034D1E7CF3A3&displaylang=en

  For .NET Framework 1.1 SP1:

  http://support.Microsoft.com/kb/885055

• Error SP3 cannot be updated to SP3. The c:\windows\system32\comctl.dll file is open or in use by another application

  I am running windows xp sp2, and my system no longer recognizes my cd/dvd ROM. I tried using microsoft 'Fix It', but it says I need to run service pack 3. During the download of update I get error SP3, the file c:\windows\system32\comctl.dll is open or in use by another application. All the closed only apps.are execution update for sp3.   The cd/dvd ROM error says file in the registry is missing or corrupted. I'm stuck. Anyone know what I can do?
  Thanks, Rokcney

  Hi Rokcney,
   
  Follow the steps listed in the section "Let me fix it myself" in the following article to resolve the problem:
   
  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

   

  Your CD or DVD drive is missing or is not recognized by Windows or other programs