DirectSound: program crashes on IDirectSoundCaptureBuffer_Release only on the USB audio devices

Similar Questions

• Using the USB audio device as default instead of analog audio ports

  Audio microphone USB installs and is listed in the devices under sound, video and portable with Dell computer game controller devices running Windows Vista, but the problems the system to use the USB mic as the default.  The sound devices list has also IDT HD audio codecs indicated, and the system will analog as the default input channels for the microphone, with no way to install the USB device.  Is it possible to put the USB audio as default microphone device?

  Hello RSA 456,.

  Many sound problems are caused by hardware that is not configured correctly. We will check your sound card, connect the cables in the correct locations, ensuring that the material has the power and the verification of the volume.
  Please follow the method described below to solve the problems.
  Method 1:

  1. plug your USB microphone.
  2. the LED will light to indicate that it is powered USB.
  3. Windows will automatically detect the USB Audio device and install the universal drivers.
  4. to set up your microphone as default device USB Open Control Panel.
  5. Select display as a classic view of your control panel, then select Select Sound.
  6. click on the recording tab. Here your USB Microphone will be listed.
  7. click on the USB microphone. If there is no checkmark beside the USB Microphone, click on set as default.
  8. the default device is used in most programs such as tape recorder simple registration.

  Method 2:
  Please click the link below to check how to check if the hardware works just fine.
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows?T1=tab02

  Kind regards
  Sooraj.S

• How can I get the USB Audio device in option audio device for Windows XP?

  USB Audio will not appear as an option. However, the Audio USB headset is an option. Help. Thank you

  Hi VincentMr,

  ·         What is the brand and model of the USB audio device?

  You may need to install the device drivers on the device manufacturing site, or else you must have received the CD of the software with the device.

  See the following article for more information on the update of drivers:

   

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

  Let us know the results.

• I need the fix for win Xp Sp2 can install the HD Audio Device codec

  I need the fix for win Xp Sp2 can install the HD Audio Device codec!

  I has this fix and I lost it...

  It is contains (patch 3)

  can u please help me and give me the link of this hotfix

  Could be the fix. Looks like he helped other people with the same device.

  http://support.Microsoft.com/kb/888111

  If this isn't the case, I can continue to dig.

• No sound from the computer with connected generic speakers VISTA SP2. Symbol pregnant shows active with the Digital Audio device.

  I have vista SP2, I connected to generic stereo speakers using the green light at the back of the computer. Vista does not recognize the speakers. The speaker symbol at the bottom right shows "digital (HDMI) 2 high definition output audio device." It shows active. I had this problem before, and VISTA should pick up 'speakers' something to that effect. I have no sound until it captures "speakers". I can't get VISTA to recognize this. It keeps starting with the digital audio device. Don't know what to do, checked all the forums. It should just pick up these simple generic markets good speakers. Before SP2, I lose sound when VISTA is in standby mode. He would then turn off the stereo speaker and replace the digital output device driver... However since SP2 I can't get VISTA to recognize that I have just connected speakers and not a digital output device.

  Yes, when I uninstalled the driver, THEN shut down the computer and then restarted, he picked up the device high definition audio "speakers" good pilot is NOT the

  "digital (HDMI) 2 high definition audio output device that he used to pick up."

  I now have sound!

  I hope that it stores the right driver now as in the past, when VISTA went into sleep mode, it will disable the speakers, and you have to restart every time.

  Thanks for your help.

  You can add instructions to boumediene, the fact that you must RESTART your computer to search for new drivers, once you uninstall.

• DirectSound: program hangs on IDirectSoundCaptureBuffer_Release

  Hi, this is a copy of

  https://Bugzilla.gnome.org/show_bug.cgi?id=763322

  basically: sometimes windows IDirectSoundCaptureBuffer_Release method hangs forever or until I unplug all audio device that is used.

  Occurs only with devices usb and direct its api. Tried with windows 7 latest version of different PCs.

  Does anyone know how to get more information, help, correction...

  Stack trace:

  wow64cpu.dll!CpupSyscallStub+0x9
  wow64cpu.dll!WaitForMultipleObjects32+0x3b
  wow64.dll!RunCpuSimulation+0xa
  wow64.dll!Wow64LdrpInitialize+0x429
  ntdll.dll!??_C@_0BN@KLOBBEB@Enabling?5heap?5debug?5options?6?$AA@FNODOBFM@+0x29364
  ntdll.dll!LdrInitializeThunk+0xe
  ntdll.dll!_ZwWaitForMultipleObjects@20+0x15
  kernel32.dll!_WaitForMultipleObjectsExImplementation@20+0xe0
  kernel32.dll!_WaitForMultipleObjects@16+0x18
  dsound.dll!?LockOrEvent@CMutexLock@@QAEHPAX@Z+0x22
  dsound.dll!?TpEnterDllMutex@CThread@@IAEHXZ+0x22
  dsound.dll!?HandleFocusChange@CDirectSoundAdministrator@@AAEXXZ+0x2c
  dsound.dll!?UpdateGlobalFocusState@CDirectSoundAdministrator@@QAEXH@Z+0x6e
  dsound.dll!?ThreadProc@CDirectSoundAdministrator@@EAEJXZ+0x37
  dsound.dll!?ThreadLoop@CThread@@IAEJXZ+0x1d
  dsound.dll!?PrivateThreadProc@CThread@@AAEJXZ+0x32
  dsound.dll!?ThreadStartRoutine@CThread@@CGKPAX@Z+0xd
  kernel32.dll!@BaseThreadInitThunk@12+0xe
  ntdll.dll!___RtlUserThreadStart@8+0x70
  ntdll.dll!__RtlUserThreadStart@8+0x1b
  

  Hi Thomas,

  Thank you for the update.

  It is unfortunate that suggestions have not worked so far. This is why I would recommend posting your query in MSDN for the best possible answer.

  Please post your question in MSDN.

• Under certain conditions (by program) make MessageCheckBox read-only for the specific rows in a table

  Hello

  I have a table (on a custom page) which includes the columns MessageStyledText and MessageCheckBox column, I want to put the MessageCheckBox to read-only if the value of the column MessageStyledText of the line is "XYZ", could someone give me some advice on how this can be achieved?

  Oracle EBS: 12.1.3

  JDEV: 10.1.3.3.0.3

  Kind regards
  Carl

  Sorting using SPEL (according to https://forums.oracle.com/message/1815932#1815932).

• system crashed, I need to select the first boot device in the boot menu...

  my computer crashed and has a black screen I have reboot by pressing F8 and then to the start menu

  What now?  Press and hold f8 at startup takes me the blue screen with 3 options 1) esc = boot menu 2) f10 = set up 3) f11 = system restore.  I don't have a disk to restore the system or boot disk.  What should I do

  +

  Hello, thank you for using the Microsoft forums!

  What happened when you "press f8 and went into the start menu. ?  You should have seen the inscription as:

  'safe mode', "safe mode with networking", "last known good", etc. etc.  In these situations, it depends on what the computer or the user was doing when the computer crashed, what the line of resolution would result. Just from the top, select Safe mode and try to start.  If windows starts, there are probably a problem with drivers not loaded through a secure boot which only loads the windows drivers of base needed for windows open and run in a limited mode. While in safe mode, we will offer you the choice to use the SYSTEM RESTORE to restore your computer to an earlier point in time where everything worked well. In unknown situations, when I'm in front of a computer when you know not what caused the accident, I take a point of restoring older and not the most recent one, preferably a machine made on its own schedule, not a constraint by a device or driver installation. Note that a SafeMode restore is not generally reversible, i.e. canoe must be cancelled at the point before the restoration (in this case, the condition has crashed), yet other points before and after can be subsequently used.

  Once you have done this, or even before, if you would not rather try this again, you can use Event Viewer to try to find out what happened before the crash. Check the system and application logs, for the latest entries and repost here about this if you need help with the content of the newspapers, and we will try to help you. Alternatively, if you get it running, then you can visit this site to help you with additional questions. This is the new, free and fully automated from MICROSOFT support portal, and it can help you with most of the problems windows with a few mouse clicks.

  http://support.Microsoft.com/FixIt/default.aspx

  "THE BEST THING TO DO IN THIS WORLD IS A WRONG ANSWER! "I"DON'T"WINDOWS...". »

• Ringtone and gamemusic only on the blutooth/headphones-device

  Hi you all out there.

  My iPhone 5 (most recent iOS) is not connected to any external device via bluetooth, etc., no headphones plugged.

  So there is no ring tone for incoming calls (vibrant works), game-apps have no sound. Dictation voice-messages does not work, the curve which shows the recognition of the frequencies is flat. But the music from the music app is normally played on the loudspreaker!

  But when I connect it to a speaker of the blutooth with a microphone, I hear the ringtone and game-music and saving messages of speech also works via the blutooth device. The same thing when the headphones are connected.

  Mode normal iPhone always think, it is connected to another Bluetooth device or something else and it's use for some acoustic out - and input - if it is not connected.

  I rebooted several times, flightmode turned on and off, ignored or deleted all bluetooth devices, he has experienced so far (only 2), opened the only application, which allows to redirect the output to devices outside and clicked on "iPhone" or "speaker" as the device to use - nothing helped so far...

  Any other ideas?

  Thanks in advance!

  Michael

  Look at the switch at the top left of the phone. Make sure you stop sounds. If you see orange in this turnout, reverse the reverse effect.

• System crash after deleting files of the Core Audio framework

  I posted this in the community of the logic, but I thought I should repost here due to the * urgency * the problem I just created...

  In an attempt to get an audio interface to work, I deleted the two files of the Core Audio framework. As soon as I deleted them the work of the computer stopped, let me not even return them to the trash. Since the restart you cannot find past grey screen with the apple logo. Have also tried to start in safe mode... I have just the wreck this computer?

  MacBook Pro mid 2012 with OSX 10.8.5

  You can't really wreck software on Mac, but you will need to reistall of recovery...

  OS X: on OS X Recovery - Apple Support

  This will install only the system files and leave you the data in place.

  If you have a Time Machine backup or a clone you can restore those.

• Impossible to start only on the desktop, bootable device error - please restart

  Original title: windows startup problems 8

  I have a Toshiba satellite laptop that came from the factory with windows 8.  I just can't get started.    It stops at the toshiba leading innovation which is the first screen after power to the screen on.  the function keys that product screen blank screen except at the top where a line doesn't read bootable device - please reboot of the system, which can do to solve this problem

  Hi Ericmadison,

  This problem may occur if your hard drive is not set as your first boot or because of defective hard drive device.

  What is the exact full model of your PC Toshiba satellite laptop?

  Make sure that your hard drive is set us your first boot in the BIOS device. See your manual for your Toshiba satellite computer to check the key to enter the BIOS. Once you get into the BIOS, check if your hard drive is selected as the first boot device.

  Warning of the BIOS: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly.

  Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  If the hard disk is already selected as first boot device, I suggest you to run the check disk from the Windows recovery environment using the installation media. CHKDSK (Chkdsk.exe) is a command-line tool that checks volumes on your hard disk for problems. The tool will attempt to repair problems it encounters. For example, Chkdsk can repair problems related to bad sectors, lost clusters, reticulate files and directory errors.

  As Windows came pre-installed, try to create an installation of Windows 8 media (DVD/USB). Check out the following link.

  How to create an installation media for a PC refresh or reset

  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

  Try to go to BIOS option to change the priority of boot on CD/DVD (first boot device). See your manual for your Toshiba satellite computer to check the key to enter the BIOS.

  Once you change the boot priority, follow the steps mentioned below.

  Check the drive of the Windows recovery environment (RE Win) and check. Follow these steps:

  1. Insert the Windows 8 (DVD/USB) installation media, and then restart the computer.
  2. Hit F12 key (usually it's F12, but it may differ between computer manufacturers) and choose the drive in which you inserted into the installation media.
  3. Once the Windows Setup window appears, follow these steps:
  4. Then drag and select repair your computer.
  5. You will then see a blue screen and an option to choose.
  6. Choose the Troubleshooting option and select Advanced options.
  7. Select prompt to start the Advanced startup option.
  8. Computer will restart automatically.
  9. Once restarted, choose an account with administrative privileges.
  10. In the next screen, enter the appropriate password and press the button continue to access command prompt.
  11. In the command prompt window, type the following command:

  CHKDSK /F /R

  12. Once complete, restart the computer and check.

  Important: the data available on bad sectors may be lost when chkdsk attempts to repair your hard drive.

  Please answer us on the State of the question to help you further.

• E4200 with Win 7 - could not connect to the sharing of files on the USB storage device

  Hi, I tried several disks now, but am mainly interested in getting my Iomega 1 TB drive to work, but none of the 3 I tried to do. None of the USB drives I had when buying this router on the list of "approved" ridiculously short which is of course not noticed when buying the router, but the discs are recognized, I can FTP to one of them (Filezilla), format, create to-DOS, etc. via the web interface... the only thing that does not seem to work is to map the created actions. The error obtained net use is 'System error 1231' giving in 'Map network drive', 'Windows cannot access\\192.168.1.1' with 0x800704cf error code. I get what I pass credentials or not. Please advise, external storage has been the main reason that I bought this router and I need to know if I should return it. Thank you

  I know that sounds totally absurd given that FTP and what - not worked, but I swapped the USB cable I was using between readers and the router, and presto, it worked. I been in this business a lot of time and work with Cisco equipment all the time, so I know how ridiculous, this sounds like a solution, and perhaps in the context of permutation that cable thing happened I can't remember since I was a package 6 deep at the time... but it works now... now, if I can get just the AVI 1080 p files to stream to Xbox 360 without the video do rough I will be gold... but that's another thread. Thank you all.

• Could not find the SRS audio device error

  Since I installed Windows7 on my laptop, I got the error "Unable to find compatible SRS audio device" on start up. I checked the "Device Manager" and all audio devices seem to work normally. I have re-installed Windows7 and I still have the same problem. When I play music, I get static on my speakers. When I use a trial subscription to a SRS audio product for purchase, the problem goes away. I want to fix this problem without having to pay for one of the products of the SRS.

  Uninstall the driver, reboot the system. The attempt to install the same driver for Windows Vista using Windows troubleshooting. Make a right click on the file executable/installer driver-> properties and select the Compatibility tab. Click on the box to check run this program in compatibility mode for option and select Windows Vista from the drop-down list. then try to install the device driver using run as administrator.

  Resources:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx?type=hardware

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

• Satellite L500 - could not find the SRS audio device

  At the start of my Satellite L500, a message appears saying - could not find the device audio compatible srs. This has happened when I upgraded to windows 7.

  Can someone tell how to fix this?

  Hello

  I have the Satellite L500 also but I couldn't t notice this problem. SRS audio device that has something to do with the audio driver, I think.

  What do you think to update this driver? You can get it here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Before installing the latest version I recommend you remove the old first. Do a restart and install the most recent.

• HP Compaq 8100 Elite: Boot interrupted by the USB storage device

  If I have any sort of plugged when starting USB storage device, I just get a blank screen with a blinking cursor.

  I disabled each device start-up apart from the internal SATA hard drive and it still happens.

  Finally I found a BIOS update.

  On the HP consumer Support Site? NO.

  On an alley, ad - ridden, dirty pilots-for-all site.

  Anyway. It worked