Audio drops after 7 seconds

Similar Questions

• After the last update of Firefox, Firefox drops after 30 seconds - unusable, how to return to the previous version?

  I am running Windows Vista. After update of Firefox, it will load and after about 30 seconds or less, it falls back to the Mozilla Crash Reporter screen. If I click on anything on the screen, he abandoned that much faster. Cannot even verify the version so that it falls. I need to go back to a previous version that worked at least on my machine. Basically, I have been forced to start using short-term solutions Explorer and am plans to use one of the other available browsers since Firefox no longer works for me. I really like Firefox and would like to get this matter resolved.

  I'm glad to hear that your problem has been resolved.

  If you have not already the case, please mark this thread as solved by the solution of marking.
  
  This will help other users experience similar problems helps to find faster and more efficiently.

  I hope that you will continue using our products and we thank you for contacting the Mozilla Support.

• Audio drops after coding

  Hi all

  I created a video in first and sent to SOUL to encode. It's a basic edition and everything worked in the timeline before I sent it to code. After the encoding of a 720 p H.264 Quicktime 59.94 fps, the last 2 minutes of audio on the video disappear. I checked the audio mixer window, and the track is panned Center... The audio plays well in the first... I don't know why he disappeared after you have encoded. Can someone help me understand why this has happened? It caused some grief to me to work. Thank you!

  -Cody

  Good to hear that the export works from Premiere Pro.  Is coding through SOUL work as well now?

  Don't know exactly what was causing this problem.  Then, you erased the media cache and waited for the whole import process to fill as I mentioned on my previous post?  If this is the case, perhaps your support not was not cached correctly on your first try for some reason any.

• Audio stops after 24 seconds

  I've recently started working with Flash 8.
  
  When I imported an audio file (mp3, 2 MB) in the library, all played OK. However, once on the timeline it is only 24 seconds approximately and then suddenly stops.
  
  Can someone help me solve the problem please?

  Thanks for the tips. I have it sorted by putting audio on a new layer.

• EXTERNAL VIDEO CONFERENCE DROP AFTER SECONDS

  Salvation;

  I have a MSD 15.3.0 version and TMSXE 5.3,
  I have a wooded area, with:
  10.5.2.10000 - 5 CUCM
  PRESENCE 10.5.2.21900 - 4
  TMSPE: 1.7
  CONDUCTOR: 4.2
  NŒUDS EXPRESSAY: 8.6 (EXP-E clusters and cluster EXP - C)
  TELEPRESENCE SERVER: 4.2 (4.23)

  Salvation;

  When I create a new video conference using the SCHEDULER INTELLIGENT or CMR, an external user cannot stay in a conference, this connection is dropped after every seconds.  In my vts newspapers exist the message below, where information this close due failure invitations SIP call.

  274 2016/09/12 16:47:47.768 SIP Info call 10.254.0.30:42033
  "" 16:47:47.771 275 2016/09/12 call APP Info 21: incoming new SIP call of '[email protected] / * /"
  276 2016/09/12 16:47:47.953 calling APP Info 21: "FABIO 2s" has now joined Conference "Reuniao Agendada 09/12/2016 16:24.
  277 2016/09/12 16:48:09.340 calling APP Info 21: stopped contributing video, now contribute audio only
  Time from NTP Info 278 2016/09/12 16:48:10.706 is my Sep 12 16:48:10 2016
  279 2016/09/12 16:48:16.058 SIP Info call 10.254.0.30:42033
  "" 2016/09/12 280 16:48:16.061 calling APP Info 22: incoming new SIP call of '[email protected] / * /"
  281 2016/09/12 16:48:16.098 calling APP Info 22: "Leonardo Silva" has now joined Conference "Reuniao Agendada 09/12/2016 16:24.
  Appeal of error SIP 16:48:23.743 282 2016/09/12 22: close call due to failed invitations
  283 2016/09/12 16:48:23.743 call CMGR Info 22: disconnection, '[email protected] / * /"-service not available".
  284 2016/09/12 16:48:23.745 calling APP Info 22: shoot call them from "Leonardo Silva" - destroy at request end. not available
  SIP 16:48:23.835 285 warning call 2016/09/12 22: unable to close successfully the dialogue with BYE
  286 2016/09/12 16:48:31.937 call CMGR Info 21: disconnection, '[email protected]/ * / '.
  287 2016/09/12 16:48:31.937 calling APP Info 21: shoot call them "Fabio 2s" - destroy at request end. remoteTeardown
  

  I have check all information in othe Detective Conan in this forum: https://supportforums.cisco.com/discussion/12294701/telepresence-server-...

  I made recommendations, but with IX Protocol disable SIP PROFILE DRIVER and MEETING ALIAS, the same error occurs. My maximum size of incoming messages is updated to be 11000.

  Internal Conference is going on normally.

  Any idea?

  Best regards;

  Fabio Santos

  I've seen some similar behaviour in the past - on trunk SIP pointing to the highway, try to uncheck the "SRTP allowed" and see if it works.

• Skype Audio / video call disconnect after 14 seconds in mac

  Skype Audio / video call disconnect after 14 seconds in mac

  1. call interrupted after 13-14 seconds

  2. cannot hear the caller's voice but may receive on my side

  3. I have reinstall the Skype delete old does not work

  4. even I have remove the whole mac and reinstall is the same question

  5 normal voices of Skype can hear I can do auduio / video on the face time

  so its means something wrong after that I tried everything I decided to inform Skype because I didn't even have no solution or anyone else have problem with that

  Finally I found the solution that my firewall was turned off, I just turn on and work and then I turn off again and its working fine but this solution that I found after post

• Satellite C645-SP4131L - audio disappears after 10-15 seconds of game

  Hello, help me with this problem:

  Whenever I try to play music files at high volume, the sound goes away after 10-15 seconds or more, but at this time I plug in a headset and then disconnected after 2 seconds, the sound from the speakers of the laptop back, but after 10-15 sec disappears again.

  A special case is that when I play a file any with the low volume, the sound from the speakers does not disappear.
  I tried to reinstall the current driver, with the right system I (windows 7 professional 64-bit)

  It is not virus problem (I can play with headphones and listening to higher volume).
  Also disable the built-in microphone, believing that it was a bad configuration or the coupling of the signal, this problem seems to indicate that it is a technical failure

  The audio output amplifier speaker which is a failure?

  Is it diagnostic software to try to know what the actual fault? I hope that your answers, thank you for reading my post.

  Sorry if I am not clear, I do not speak very good English

  > A special case, is that when I play a file any with the low volume, the sound from the speakers does not disappear.
  Have you noticed the same thing using earphones?
  Theoretically, it could be just a problem of speaker and no sound driver problem.
  But that would mean that the speakers of the laptop must be replaced.

• Telepresence server, control assets drops Conference after 30 seconds

  Much of community support.

  I have the following Setup:

  10.5 (1) version CUCM

  Conductor of telepresence Version XC2.3

  Telepresence Virtual Server Version: 4.0 (2.8)

  EX60 TC 7.1.4

  Cisco 9971, Firmware 1.0000 SR1

  Some other phones (7962, 6941)

  All the end points are saved to CUCM.

  When I do a conference appointment without active active control, everything works fine.

  When I activate the active control (according to ActiveControlDeploymentGuideR3.pdf) the Conference ends after 30 seconds.

  the Conference ends even if I have only one participant at the Conference and any of the phones that I use.

  In CUCM, I configured the relevant parameter in the SIP profile (according to ActiveControlDeploymentGuideR3.pdf)

  on the EX60 I use Active Control, so I see the list of participants and I am able to change the layout of the Conference within these 30 seconds.

  any ideas why this happens?

  the journal of the conductor shows nothing statement

  the telepresence server log looks like this:

  327	14:17:09.170	APP	Info	Conference "8080.MeetMe_mtg' created
  328	14:17:09.264	SIP	Info	Incoming call on 192.168.33.xxx:37124
  329	14:17:09.264	APP	Info	"' Call 24: incoming new SIP call of '[email protected] / * /"
  330	14:17:09.379	APP	Info	Call 24: 'Buero_EX60_Test' has now joined Conference "8080.MeetMe_mtg".
  331	14:17:09.386	IX	Info	Call 24: no encrypted connection to 192.168.xx.xx:31135 for protocols: ping, xccp
  332	14:17:09.814	CMGR	Info	Call 24: ActiveControl negotiated
  333	14:17:46.736	SIP	Error	Call 24: end of appeal because INVITE it transaction timeout
  334	14:17:46.736	CMGR	Info	Call 24: disconnection, '[email protected] / * /"-timeout.
  335	14:17:46.736	APP	Info	Call 24: shoot call them "Buero_EX60_Test" - destroy at request end. timeout
  336	14:17:46.736	SIP	Error	Call 24: BYE transaction failed because the network error
  337	14:17:46.740	SIP	Warning	Cannot determine the destination for the incoming message transaction
  338	14:17:46.741	SIP	Warning	Request received from out-of-call
  339	14:17:48.989	APP	Info	Conference "8080.MeetMe_mtg": deleted via API (not of participants)

  Journal of the conductor, it seems that CUCM closes the connection to RE-INVITE during the transition between the lobby.

  There are several possible reasons, but the best way to determine "why" would be to open a track on CUCM.  More precisely a SDI/SDL (are later versions of CUCM SDL only) track on the CUCM 10.0.2.52 node.  Search for RE-INVITE him entering the IP phone and examine the lines of nearby log for some reason why.

  Alternatively, you can try a few other things:

  #1: Look in Service CUCM settings in the editor, then Cisco Call MAnager to the advanced parameter 'Maximum incoming message size' (there is an Advanced button, you must click above to expose this setting).  If you upgraded your CUCM from an earlier version, this value may need door to 11000 to manage RE-INVITE him to the conductor.

  #2: try disabling the Protocol iX on the SIP, conductor profile and the alias of the meeting of the conductor.

  MP.

• Major Frame Drops after 5-10 minutes

  Hello world

  I'm really frustrated here, I'm a game developer, and I use the GPU in almost all cases, from Photoshop to unity still play games myself. Since the last update 10.11.4 I have this huge problem , and everything I do will not disappear.

  Whenever I run an application / game that rotates with GPU I get spikes massive lag and thus Frame Drops, they last about 1 seconds but they occur every 30 seconds - 1 minute, this is a huge deal for me and I can't really work like that. Of course, I put photoshop to the CPU usage for now and no problems. But I really need to work efficiently and without Frame Drops.

  I run at El Capitan with a Macbook Pro LATE 2013 10.11.4 @.

  2 GHz Intel Core i7 (CPU)

  8 GB 1600 MHz DDR3 (RAM)

  Intel Pro Iris 1536 MB (GPU)

  Before someone says I should have got the Nvidia gpu, I should mention that I tried on 2 games to 1 which I played with ease previously:

  Hand of fate

  The Witcher: Enhanced Edition

  Please if someone else has the same problem, make sure that post you here. It bothers me that I have not found anything about the case.

  I also ran an EtreCheck if anyone is interested:

  EtreCheck version: 2.9.11 (264)
  Report generated 2016-04-16 15:29:41
  Download EtreCheck https://etrecheck.com TIME 01:31
  Performance: Excellent

  Click the [Support] links to help with non-Apple products. Click the [details] links for more information on this line.

  : Another problem
  Description:
  Whenever I use an application that uses GPU or if I play a game, I get large Frame drops after 5-10 minutes in application t.

  Hardware information:
  MacBook Pro (retina, 15 inches, end of 2013)
  [Technical details] - [User Guide] - [warranty & Service] MacBook Pro - model: MacBookPro11, 2
  1 2 GHz Intel Core i7 CPU: 4 strands
  8 GB RAM not extensible

  BANK 0/DIMM0
  OK 4 GB DDR3 1600 MHz

  BANK 1/DIMM0
  OK 4 GB DDR3 1600 MHz

  Bluetooth: Good - transfer/Airdrop2 taken in charge Wireless: en0: 802.11 a/b/g/n/ac
  Battery: Health = battery check - Cycle count = 460

  Information about this video: Intel Iris Pro

  Color LCD 2880 x 1800

  System software:
  OS X El Capitan 10.11.4 (15E65) - since the starting time: 4 hours

  Disc information:
  SM0256F SSD APPLE disk0: (251 GB) (Solid State - TRIM: Yes)

  EFI (disk0s1) < not mounted >: 210 MB

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  Macintosh HD (disk 1) /: 249.79 (GB free 65.99) encrypted AES XTS unlocked
  Storage of carrots: disk0s2 250.14 GB Online

  USB information:
  Apple Inc. Apple keyboard / Trackpad

  1. the present proceedings is a diagnostic test. It doesn't change anything for the better or worse and therefore, by itself, will not solve the problem. But with the help of the results of the tests, the solution may take a few minutes, instead of hours or days.

  The test works on OS X 10.8 ("Mountain Lion") and later versions. I do not recommend running it on older versions of Mac OS X. It will do no harm, but it will not do not much good.

  Do not be put off by the complexity of these instructions. The process is much less complicated than the description. You make the tasks more complicated with the computer all the time.

  2. If you do not already have a current backup, please back up all the data before doing anything else. The backup is needed on the general principle, not because of what anyone in the test procedure. Backup is always a must, and when you encounter any kind of problems with the computer, you can be more than the usual loss of data, if you follow these instructions or risk not.

  There are ways to back up a computer that is not fully functional. Ask if you need advice.

  3 here is instructions to run a UNIX shell script, a type of program. As I wrote above, it doesn't change anything. It does not send or receive data over the network. There is no to generate a report on the State of the computer human readable. This report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents for me or someone else.

  You should ask yourself if you can believe me, and if it is safe to run a program at the request of a foreign national. In general, no, he's not sure, and I encourage it.

  In this case, however, there are ways for you to decide if the program is safe without having to trust me. First of all, you can read it. Unlike an application that download you and click to start, it is transparent, anyone familiar with the code can check what it does.

  You may not be able to understand the script yourself. But variations of it have been posted on this site several times over a period of years. One of the million registered users to have read the script and set off the alarm if it was dangerous. Then I wouldn't be here now, and you would not be reading this message. See, e.g., this discussion.

  However, if you cannot satisfy yourself that these instructions are safe, do not follow them. Ask other solutions.

  4. here is a general summary of what you need to do, if you decide to go forward:

  ☞ Copy text from a particular web page (not this one) to the Clipboard.

  ☞ Paste into the window to another application.

  ☞ Wait for the test to run. It usually takes a few minutes.

  ☞ Stick the results, which will be copied automatically, in a response on this page.

  These are not specific instructions; just a glimpse. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait and paste it again. You don't need to copy a second time.

  5. try to test in conditions that replicate the problem, to the extent possible. For example, if the computer is slow intermittently, run the test during a downturn.

  You may have started up in safe mode. If the system is now in safe mode and works pretty well in normal mode to test run, restart as usual before running it. If you can test only in safe mode, this.

  6. If you have more than one user and a user is affected by the problem, and the user is not an administrator, and then run the test twice: once under the affected user and one administrator. The results can be different. The user that is created automatically on a new computer, when you start it for the first time is an administrator. If you are unable to log in as an administrator, verify that the user concerned. More personal Mac have only one user, and in this case this section does not apply. Don't log in as root.

  7 load the linked web page (the site "Pastebin.") Press the combination of keys command + A to select all the text, then copy it to the Clipboard by pressing command-C.

  8. start the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name ("Terminal") in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing Command + V, then press return. The text that you pasted should disappear immediately.

  9. If you logged in as an administrator, you will be prompted for your login password. Nothing displayed when you type. You won't see the usual points instead of the characters typed. Make sure that caps lock is turned off. Type carefully, and then press return. You can get a warning to be careful. If you make three unsuccessful attempts to enter the password, the test is still running, but it will produce less information. If you do not know the password, or if you prefer not to enter, just press back three times at the password prompt. Yet once again, the script will run.

  If the test takes much longer that usual to run because the computer is very slow, you can be prompted for your password a second time. The permission you grant by entering it will expire automatically after five minutes.

  If you are not logged as an administrator, you will be prompted for a password. The test will run. It just will not do anything that requires administrator privileges.

  10. the test may take a few minutes to run, depending on the number of files you have and the speed of the computer. A computer that is abnormally slow may take more time to run the test. During execution, a series of lines is displayed in the Terminal window like this:

      Test started

          Part 1 of 4 done at: … sec        …        Part 4 of 4 done at: … sec

      The test results are on the Clipboard.

      Please close this window.

  The intervals between the parties will not be exactly the same, but they give an approximate indication of progress.

  Wait for the final message "Please close this window" appear - again, usually within a few minutes. If you don't see this message in about 30 minutes, the test probably won't be completed within a reasonable time. In this case, press the Ctrl + C key combination or the point command to stop it. Then go to the next step. You will have incomplete results, but still something.

  In order to get results, the test should be allowed to perform or be stopped manually as shown above. If you close the window of the Terminal, while the test is still running, the partial results will not be saved.

  11. when the test is completed, or if you manually stopped, leaving the Terminal. The results have been saved to the Clipboard automatically. They do not appear in the Terminal window. Please do not copy from there. All you have to do is start a response to this comment and then paste it again by pressing Command-V.

  At the top of the results, there will be a line that begins with the words «Start time.» If you do not see that, but rather to see a mass of gibberish, you wait for the message "close this window". Please wait and try again.

  If personal information, such as your name or e-mail address, appear in the results, make anonymous before posting. Usually it will be not necessary.

  12. in the validation of the results, you see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the software which manages this website. Thanks for posting the results of the tests on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

  13. When you are finished with the test, it is gone. There is nothing to uninstall or clean.

  14. This is a public forum and others can give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but all that you can not be. For others who choose to run it, I do not recommend that you view the results of test on this Web site unless I ask.

  15. the related UNIX shell script is a notice of copyright. ASC readers can copy for their personal use. The whole nor any part can be redistributed.

• Youtube video of yoga stuck 8 after 27 seconds

  I have yoga 8 4.4.2 android running and the youtube app update. All tube videos you stuck exactly after 27 seconds to play. Audio to work well. Everyone face similar problem?

  I am doing this side only if playback of video in youtube app. If the video is embedded in the Web site (even if the source is still youtube)... The hanging of video stream is not the case.

  Update:

  There is a system update, I've seen today with the build number. 140811... applied the update and after reboot it seems that the problem has disappeared.

• T410s internal speakers fade out after a second, headphones work fine

  Hello community,

  My THinkpad T410, type 2912-45 G, Windows 7 (64-bit) has a problem with the speakers.

  From Monday (June 25) my speakers stop working. When I boot the TP you can hear a static click through the speakers, and he plays the sound windows for a second only. After the second, you hear another click static and speaker no longer works. It's just fine with all other audio content, when the TP is initialized.

  After pressing the Mute button, or volume-to top keys or to low volume speakers return to work for a second about (always click static, just before this second and thereafter).

  When I plug my Headpones, everything works fine. When I unplug my headphones, speakers work again for a second.

  I already updated my BIOS, installed and uninstalled the driver, active the card its (CONEXANT HD AUDIO 20585), tried to update the driver. But nothing has worked so far. I already checked if the switch in the headphone jack is stuck, but I couldn't find anything.

  Did anyone experience the same or a similar problem? As the speakers for the second city I suppose, that the material should be good. As the headphones work correctly the sound card must be detected and properly mounted.

  I would appreciate if someone could help me with that. Sending the TP (it's always guaranteed whitin) will be my last option because I need TP to work.

  Thank you very much.

  Hi thecez,

  Sorry to say this, but it seems hardware problem. Please try BIOS and driver both power management. If the problem remains, please contact local lenovo when your machine is available for inspection.

  List of phone Support Center in the world for ThinkPad and ThinkCentre, ThinkStation systems
  http://support.Lenovo.com/en_US/research/detail.page?docid=HT036550

  Fred

• H323 incoming call drops after 5 minutes each time

  Hi people,

  Can you shed any light on this please?

  H.323 incoming call (numbering by IP)-> external F5-> Fortinet Firewall-> internal F5-> internal firewall-> VCS - E-> VCS - C-> autoattendent MCU

  The call drops after 5 minutes into the call, every time. We tried H.323 call to an internal endpoint, it falls as well. Looks like there is a value of the time-out period defined somewhere on firewall he or F5?

  Any suggestion is appreciated!

  concerning

  Chenzhe

  I hope this helps:

  http://www.Cisco.com/c/en/us/TD/docs/Telepresence/infrastructure/article...

  1. Term applied to network connections through the firewall limits. For example, a Cisco PIX firewall can have a timeout of the form control:

     timeout conn 1:00:00 udp 0:02:00 h225 1:00:00 h323 2:00:00

     (i.e. a list of names of Protocol recognized each followed by a timeout in hours, minutes, and seconds). This example requires a limit of 2 hours on the H.323 connections; However, it also imposes limits on the other protocols, which would also affect a video call (UDP and H225). Several different network protocols are involved in an IP video call. The call being demolished may cause a delay applied to all of them.

• Webex Cloud CMR SIP video calls disconnect after 20 seconds

  Hello

  I am running version 9.1 with Exressway-C CUCM / 8.6 Expressway-E.  I have no problem doing business SIP video calls.  However when I make video calls on a site of WebEx CMR, the call becomes still cut off after 20 seconds.  It is audio and video for the first 20 seconds and then disconnects the call.

  I was able to recreate this situation of 3 of my clients running CUCM version 9.

  I have 2 clients running CUCM v10.5 and the issue is not the case.  I don't know if this question is 100% related to the CUCM version, but looks like a correlation obviouse.

  I watched the SIP trace and it seems that the endpoint CUCM is end the call with normal call clearing.  I tried 8945 phones, jabber for iphones and a C40 and I get the same results.

  If anyone has any ideas I would appreciate it.

  Thank you.

  Hello

  Can you receive calls B2B? During the call set up, Webex will try to set up another session TCP inbound to your E Expressway on port 5060 and 5061, do you have this open to outside within the TCP sessions? (see page 5 of the CMR-Cloud deployment guide: http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/sol...)

  If they are open, the TCP session is configured for an incoming invitation with complete SDP of the TPS Cloud, you can check your sip max message size is located at 11000 - if you went from CUCM ~8.6 5000 was the default size and the default continues for an upgrade.  Check under system-> Service settings-> CUCM service-> show click on the button to display all options, and then check the size of incoming messages SIP advanced Max.

  -Jonathan

• IPod touch sound stops after 10 seconds to watch the video of youtube

  IPod Touch 9.3.2 volume stops after 10 seconds while watching a YOUTUBE video. Continue to play video.

  This happen using the YouTube app?

  Or by using the YouTube site?

  Try it otherwise.

• HP 15: Audio distorted after upgrade to Windows 10 Anniversary Edition

  Hey everybody,

  I just upgraded my laptop HP15 for Windows 10 Anniversary Edition. Now, I have distorted audio, is there something I can do to fix that?

  Thank you

  Bill

  @Bill_F

  After the upgrade to the anniversary edition the first thing I recommend is to update your drivers and software via Windows Update and HP Support Assistant.

  For some specific models of HP, there may be difficulties with audio destortion after update of the anniversary. Please see the following support document to see if your model in the series is in the list and the instructions to follow.

  Computers laptops HP 15 - xxxxx, 15g - xxxxx and 15 q - xxxxx - Audio is distorted when music or videos are played

  http://support.HP.com/us-en/document/c05289563