EXTERNAL VIDEO CONFERENCE DROP AFTER SECONDS

Similar Questions

• Firefox 16.0.1, videos youtube freeze after 2 seconds. FF injuries.

  Videos YouTube freeze after that 2 seconds... audio game continues for 5 seconds on it. The whole browser stops responding and I have to ctrl + alt + delete at the process level to close FF16.

  After that I uninstalled my customized version, so BONE STOCK FF16 is miss you, this is a new installation. I tried the current version flash 11.4 and 11.2 flash version to get my problem is solved.

  NO ID CRASH. No formal don't crash in itself, just a browser totally unresponsive.

  By the way... Chrome works youtube without incident. WTF.

  In addition, this problem does not exist on my installation of Waterfox... a variant of 64 free bits of 15 FF. Maybe I have a sort of x 64 issue. I think that maybe that's the problem with the standard 32-bit version of FF16. Ask me again why this happened in the first place.

  I run McAfee OAS Business Class A / V, never had a virus or something in 4 years.

  SOLVED. Watefox is the only way it seems. Needs of Firefox to fix this flash on its own it seems.

• Skype Audio / video call disconnect after 14 seconds in mac

  Skype Audio / video call disconnect after 14 seconds in mac

  1. call interrupted after 13-14 seconds

  2. cannot hear the caller's voice but may receive on my side

  3. I have reinstall the Skype delete old does not work

  4. even I have remove the whole mac and reinstall is the same question

  5 normal voices of Skype can hear I can do auduio / video on the face time

  so its means something wrong after that I tried everything I decided to inform Skype because I didn't even have no solution or anyone else have problem with that

  Finally I found the solution that my firewall was turned off, I just turn on and work and then I turn off again and its working fine but this solution that I found after post

• H323 incoming call drops after 5 minutes each time

  Hi people,

  Can you shed any light on this please?

  H.323 incoming call (numbering by IP)-> external F5-> Fortinet Firewall-> internal F5-> internal firewall-> VCS - E-> VCS - C-> autoattendent MCU

  The call drops after 5 minutes into the call, every time. We tried H.323 call to an internal endpoint, it falls as well. Looks like there is a value of the time-out period defined somewhere on firewall he or F5?

  Any suggestion is appreciated!

  concerning

  Chenzhe

  I hope this helps:

  http://www.Cisco.com/c/en/us/TD/docs/Telepresence/infrastructure/article...

  1. Term applied to network connections through the firewall limits. For example, a Cisco PIX firewall can have a timeout of the form control:

     timeout conn 1:00:00 udp 0:02:00 h225 1:00:00 h323 2:00:00

     (i.e. a list of names of Protocol recognized each followed by a timeout in hours, minutes, and seconds). This example requires a limit of 2 hours on the H.323 connections; However, it also imposes limits on the other protocols, which would also affect a video call (UDP and H225). Several different network protocols are involved in an IP video call. The call being demolished may cause a delay applied to all of them.

• Major Frame Drops after 5-10 minutes

  Hello world

  I'm really frustrated here, I'm a game developer, and I use the GPU in almost all cases, from Photoshop to unity still play games myself. Since the last update 10.11.4 I have this huge problem , and everything I do will not disappear.

  Whenever I run an application / game that rotates with GPU I get spikes massive lag and thus Frame Drops, they last about 1 seconds but they occur every 30 seconds - 1 minute, this is a huge deal for me and I can't really work like that. Of course, I put photoshop to the CPU usage for now and no problems. But I really need to work efficiently and without Frame Drops.

  I run at El Capitan with a Macbook Pro LATE 2013 10.11.4 @.

  2 GHz Intel Core i7 (CPU)

  8 GB 1600 MHz DDR3 (RAM)

  Intel Pro Iris 1536 MB (GPU)

  Before someone says I should have got the Nvidia gpu, I should mention that I tried on 2 games to 1 which I played with ease previously:

  Hand of fate

  The Witcher: Enhanced Edition

  Please if someone else has the same problem, make sure that post you here. It bothers me that I have not found anything about the case.

  I also ran an EtreCheck if anyone is interested:

  EtreCheck version: 2.9.11 (264)
  Report generated 2016-04-16 15:29:41
  Download EtreCheck https://etrecheck.com TIME 01:31
  Performance: Excellent

  Click the [Support] links to help with non-Apple products. Click the [details] links for more information on this line.

  : Another problem
  Description:
  Whenever I use an application that uses GPU or if I play a game, I get large Frame drops after 5-10 minutes in application t.

  Hardware information:
  MacBook Pro (retina, 15 inches, end of 2013)
  [Technical details] - [User Guide] - [warranty & Service] MacBook Pro - model: MacBookPro11, 2
  1 2 GHz Intel Core i7 CPU: 4 strands
  8 GB RAM not extensible

  BANK 0/DIMM0
  OK 4 GB DDR3 1600 MHz

  BANK 1/DIMM0
  OK 4 GB DDR3 1600 MHz

  Bluetooth: Good - transfer/Airdrop2 taken in charge Wireless: en0: 802.11 a/b/g/n/ac
  Battery: Health = battery check - Cycle count = 460

  Information about this video: Intel Iris Pro

  Color LCD 2880 x 1800

  System software:
  OS X El Capitan 10.11.4 (15E65) - since the starting time: 4 hours

  Disc information:
  SM0256F SSD APPLE disk0: (251 GB) (Solid State - TRIM: Yes)

  EFI (disk0s1) < not mounted >: 210 MB

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  Macintosh HD (disk 1) /: 249.79 (GB free 65.99) encrypted AES XTS unlocked
  Storage of carrots: disk0s2 250.14 GB Online

  USB information:
  Apple Inc. Apple keyboard / Trackpad

  1. the present proceedings is a diagnostic test. It doesn't change anything for the better or worse and therefore, by itself, will not solve the problem. But with the help of the results of the tests, the solution may take a few minutes, instead of hours or days.

  The test works on OS X 10.8 ("Mountain Lion") and later versions. I do not recommend running it on older versions of Mac OS X. It will do no harm, but it will not do not much good.

  Do not be put off by the complexity of these instructions. The process is much less complicated than the description. You make the tasks more complicated with the computer all the time.

  2. If you do not already have a current backup, please back up all the data before doing anything else. The backup is needed on the general principle, not because of what anyone in the test procedure. Backup is always a must, and when you encounter any kind of problems with the computer, you can be more than the usual loss of data, if you follow these instructions or risk not.

  There are ways to back up a computer that is not fully functional. Ask if you need advice.

  3 here is instructions to run a UNIX shell script, a type of program. As I wrote above, it doesn't change anything. It does not send or receive data over the network. There is no to generate a report on the State of the computer human readable. This report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents for me or someone else.

  You should ask yourself if you can believe me, and if it is safe to run a program at the request of a foreign national. In general, no, he's not sure, and I encourage it.

  In this case, however, there are ways for you to decide if the program is safe without having to trust me. First of all, you can read it. Unlike an application that download you and click to start, it is transparent, anyone familiar with the code can check what it does.

  You may not be able to understand the script yourself. But variations of it have been posted on this site several times over a period of years. One of the million registered users to have read the script and set off the alarm if it was dangerous. Then I wouldn't be here now, and you would not be reading this message. See, e.g., this discussion.

  However, if you cannot satisfy yourself that these instructions are safe, do not follow them. Ask other solutions.

  4. here is a general summary of what you need to do, if you decide to go forward:

  ☞ Copy text from a particular web page (not this one) to the Clipboard.

  ☞ Paste into the window to another application.

  ☞ Wait for the test to run. It usually takes a few minutes.

  ☞ Stick the results, which will be copied automatically, in a response on this page.

  These are not specific instructions; just a glimpse. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait and paste it again. You don't need to copy a second time.

  5. try to test in conditions that replicate the problem, to the extent possible. For example, if the computer is slow intermittently, run the test during a downturn.

  You may have started up in safe mode. If the system is now in safe mode and works pretty well in normal mode to test run, restart as usual before running it. If you can test only in safe mode, this.

  6. If you have more than one user and a user is affected by the problem, and the user is not an administrator, and then run the test twice: once under the affected user and one administrator. The results can be different. The user that is created automatically on a new computer, when you start it for the first time is an administrator. If you are unable to log in as an administrator, verify that the user concerned. More personal Mac have only one user, and in this case this section does not apply. Don't log in as root.

  7 load the linked web page (the site "Pastebin.") Press the combination of keys command + A to select all the text, then copy it to the Clipboard by pressing command-C.

  8. start the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name ("Terminal") in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing Command + V, then press return. The text that you pasted should disappear immediately.

  9. If you logged in as an administrator, you will be prompted for your login password. Nothing displayed when you type. You won't see the usual points instead of the characters typed. Make sure that caps lock is turned off. Type carefully, and then press return. You can get a warning to be careful. If you make three unsuccessful attempts to enter the password, the test is still running, but it will produce less information. If you do not know the password, or if you prefer not to enter, just press back three times at the password prompt. Yet once again, the script will run.

  If the test takes much longer that usual to run because the computer is very slow, you can be prompted for your password a second time. The permission you grant by entering it will expire automatically after five minutes.

  If you are not logged as an administrator, you will be prompted for a password. The test will run. It just will not do anything that requires administrator privileges.

  10. the test may take a few minutes to run, depending on the number of files you have and the speed of the computer. A computer that is abnormally slow may take more time to run the test. During execution, a series of lines is displayed in the Terminal window like this:

      Test started

          Part 1 of 4 done at: … sec        …        Part 4 of 4 done at: … sec

      The test results are on the Clipboard.

      Please close this window.

  The intervals between the parties will not be exactly the same, but they give an approximate indication of progress.

  Wait for the final message "Please close this window" appear - again, usually within a few minutes. If you don't see this message in about 30 minutes, the test probably won't be completed within a reasonable time. In this case, press the Ctrl + C key combination or the point command to stop it. Then go to the next step. You will have incomplete results, but still something.

  In order to get results, the test should be allowed to perform or be stopped manually as shown above. If you close the window of the Terminal, while the test is still running, the partial results will not be saved.

  11. when the test is completed, or if you manually stopped, leaving the Terminal. The results have been saved to the Clipboard automatically. They do not appear in the Terminal window. Please do not copy from there. All you have to do is start a response to this comment and then paste it again by pressing Command-V.

  At the top of the results, there will be a line that begins with the words «Start time.» If you do not see that, but rather to see a mass of gibberish, you wait for the message "close this window". Please wait and try again.

  If personal information, such as your name or e-mail address, appear in the results, make anonymous before posting. Usually it will be not necessary.

  12. in the validation of the results, you see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the software which manages this website. Thanks for posting the results of the tests on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

  13. When you are finished with the test, it is gone. There is nothing to uninstall or clean.

  14. This is a public forum and others can give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but all that you can not be. For others who choose to run it, I do not recommend that you view the results of test on this Web site unless I ask.

  15. the related UNIX shell script is a notice of copyright. ASC readers can copy for their personal use. The whole nor any part can be redistributed.

• Video conference system

  We have two requests of the customer on the videoconferencing solution can someone

  1.

  .       In the current scenario once the video conference session created & participating all joined the conference call, his name appears first & teleconference establishing later after their name disappears.

  Requirement is to show their name/display name of participant for during the entire session of the call

  2.

  Second requirement the Conference telephone automatic planning via a device MCU (centralised management); instead of everyone (all participants) dial for bridge, it should start by the central unit on behalf of everyone & connect all conference participants (depending on the time of the meeting of the Conference call will get launched from the centralized management system)

  For you to invite participants that are preconfigured, you must first add them as endpoints H.323 or SIP on the MCU. Just follow the guide supplied. Once added, you can invite participants pre-configured by checking just them and the MCU will automatically dial on these parameters once the Conference starts.

  By going in the global settings of MCU:

  Settings > Conferences > time to display the names of the participants

  This setting determines whether (and how long) participants showed for the components is accompanied by their name provided.

  Kind regards

  Acevirgil

• Satellite P100-400: WLan disconnects after seconds of connection

  Hello

  just bought a Toshiba P100-400, but I have a problem with the wireless card, I think.
  It disconnects after seconds of connection Wi - Fi. I have already downloaded the readers of the toshiba site, but it still does the same thing and I can't surf the web.

  Is this a hardware or driver problem?

  Anyone?

  Thank you

  Hello

  Similar problem was with older Intel 2200 BG WLAN card, but it is resolved with newer drivers. Please check the download page of Toshiba or Intel download page under http://downloadfinder.intel.com/scripts-df-external/Product_Filter.aspx?ProductID=2259&lang=eng

  By the way: this problem was not present with all routers. I noticed this just with a few of them. Test of connection with different WLAN routers (different manufacturers).

• Pavilion series: computer laptop screen will Flash after seconds

  my core i 3 hp pavilion laptop series 4 GB ram, 500 gb hd, 2.4 processor has a problem, is that its screen blink after seconds, what is the problem? is there any solution?

  Hey,.

  Thanks for getting back to me so quickly.

  Was the link of the Image on the screen flickers the same as what you see?

  Don't you hear the fan runs constantly?

  You see anything on your screen?

  Please, try the following steps:

  • Reset the BIOS
  • Perform a hard reset
  • Connect the laptop to an external monitor

  Do you see an image that is not flashing on the external screen?

  Forward to your response.

• Troubleshooting external video and thread unique docking station

  Try to group all threads dock into one video.  This will help me to collect information on what is and is not working there, and get it to engineering to solve.    I will edit this first post to maintain the all updated in one place.  This should make it easier to find information in the future.

  Steps to follow before reporting a problem:

  (1) check the revision on your dock.   If you look at the bottom of the docking station, you will see a variety of labels.   The PPID label is on the right side of the group labels and will include a number of review at the end.   Make sure you have a revision A01.   If you A00, and if the video does not work after trying the remaining steps in this guide, please contact support and have your A00 with A01 replaced.

  (2) be sure to update your device to the latest version of the BIOS (currently the A11 for the 713 x) and A07 for the 5130.  For the 713 x, select the version appropriate for your product.

  (3) upgrade to the latest version of the video driver.   It is currently for the 713 x 3496 and 3366 for the 5130 (note that this driver 5130 is packaged in A06 chipset driver).

  (4) connect your monitor (s) to the docking station.   The preferred method is to use directly DP to DP or HDMI to HDMI cables.   Dongles will work, but note that the DP dongles must be 'active '.   DP ++ (non-active) dongles will not work with this docking station.   Passive HDMI dongles are OK.   Use dongles and cables of good quality.   Monitors must be HDCP.

  (5) turn on monitors and set up an external video via the options of the Intel graphics driver or the WIndows Devices/project option.   The 5130 will support the LCD + external display a screen (two screens can reflect the content if you wish).  713 x will support the LCD + two external displays (each unique content display).  713 x will support daily chained DP 1.2 monitors.  Two external monitors can operate at FHD (1920) and one external monitor through DP can support 2560.

  (6) at this point, your external monitor should work.   If this is not a couple of additional troubleshooting follow the steps.

  6.1) remove and reinsert the cable from the monitor at dock.

  6.2) to ensure that the current dock is good (the LED on the front of the docking station must always be on when power is present)

  6.3) make this monitor has good source of selected entry and that the wiring is routed to the appropriate ports.

  6.4) compressed Undock and redock to see if a change occurs.

  6.5) 6.5) for tablets of 713 x, try to roll back the driver A00 video 3316 to see if that makes a difference.

  (7) if the video still does not work as you expect, please post in this topic with the following information.

  (7.1) the confirmation that you have tried the steps above and that you have indeed an A01 docking station.

  7.2) of the make and model of your monitor (s).

  7.3) information (e.g. How is everything connected) configuration

  7.4) If you use several dongles, brand and model of the dongle if known

  7.5) problem specific (s) you encounter.

  Pay attention to the updates to this thread that develops information.   I'll update below tables quite frequently - I need to dig up the test reports and add all this information here soon.

  List monitors confirmed the function:

  1907WPc (DVI)
  2007WFPb (DVI)
  2407WFP (DVI)
  E248WFPb (DVI).
  P2213 (DP, DVI)
  SP2208WFPt (DP/DVI)
  U2410 (DVI/HDMI/DP)
  U2413 (DP)
  U2711 (DVI/HDMI/DP)
  U3011

  List of monitors who may have questions:

  U2312 (DP to DP) - no video sync with 3412, seems to work with 3316.
  U2412M same as U2312
  ST2220L (HDMI to HDMI) - not detected after dock power removed/reinserted.   Workaround is to remove HDMI and power of dock, plug in power first and then HDMI.
  ST2340t (HDMI to HDMI with USB 3.0 touch) - Tablet believes monitor USB after the suspension/recovery

  Acer G246HL - DP flickers / picture does not fill the screen (with active ingredient DP dongle cable), another where monitor does not work.

  Dell E198FPf - DP flickers / picture does not fill the screen (with active ingredient DP dongle cable).

  NEC LCD17V-BK - DP flickers / picture does not fill the screen (with active ingredient DP dongle cable).

  ViewSonic VA702b - DP flickers / picture does not fill the screen (with active ingredient DP dongle cable).

  Acer AL1716 - DP flickers / picture does not fill the screen (with active ingredient DP dongle cable).

  E2209Wc - work via HDMI, but not through DP

  AOC E2450SWH - HDMI works fine, DP to HDMI (Astrotek AT-DPHDMI-MF Active) flashes.  DP to VGA (Comsol DP-VG-AD) flashes.   Persistence concerns.

  Dell P2314H - DP to DP - delay important, does not at all or its blinking.

  Dell P2314H - DP to DP - long delay for monitor DP to come after that HDMI works.   OK with monitor power off.

  E2209Wc - DP/DVI displayport topology looks but monitor will not work.

  Dell P2414H - DP only works 10% of the time

  Dell P2210 reference - DP only works 10% of the time

  Dell P2210f, 2210-t, 2210Hc - do not work DP to DP

  Dell E220Wf - won't work not DP/DVI

  Dell 2009Wt - won't work not DP/DVI

  Reference Dell 2213 - some work, some don't?

  Dell U2413 - no video via active DP HDMI adapter, works very well with the right RFP

  Dell 2414Hb & failure 2009Wt - DP to DP - Dell to detect again after cycle dock, only mirrors, extend.

  HP LA1951g - flicker when using VGA, OK with HDMI/DVI

  P2210f - OK with DP DP, problematic in the case.

  Dell U2412m - does not work with DP

  Dell S2240M - does not work with DP to DVI active

  P2314H - DP to DP fails to reconnect after sleep cycle

  List of dongles confirmed the function:

  Questions cable gold plated active DisplayPort to HDMI male/female adapter (tested on 7130)

  Questions cable gold plated active DisplayPort to DVI male/female adapter (tested on 7130)

  Bizlink Dual Link DP to DVI (out of stock at the moment)

  List of dongles confirmed having problems:

  Any DP ++ (passive) dongle - dock can't DP ++ (passive) DP dongles.

  Thank you!

  What do guys for the monitors to u2312 and u2412?

• A few questions about the video conference via the public network

  Hi all

  I have a few questions that need your help:

  1. normally, I connect endpoints to MCU via local network (extended WAN) so everything is OK. But if I want to connect to the MCU via the public network (e.g. Internet FTTH), am I any equipment more or MCU settings? Need video firewall option?

  2 Cisco Telepresence does support VPN for remote endpoint to join video conference?

  Thank you

  Hi yours!

  (1) If you are looking in the connectivity, I would recommend that you speak to someone in sales of cisco (partner)

  to tell you a little more about the deployment of VCS-E and VCS - C.

  You need something to do good firewall/nat traversal, not only for the nat in your organization,

  but also for remote users with endpoints behind a nat home router,...

  (2) the endpoints and the infrastructure do not have a vpn client, but you can of course use VPN router between the two.

  But you should know that the video uses a certain packets per second and bandwidth so the vpn router could

  in trouble and a vpn also adds the overhead rate ip then you have MTU problems.

  But yes, I saw people using Cisco Telepresence via VPN.

  Yours: Please note the answers using the stars below!

• Video export from After Effects for HTML5 Web banner

  I have a 10 second video made in after effects CC 2015 with 300 x 600px and duty work under a Web banner.

  We need to provide as HTML5 and the Media Guide he needs with the maximum of 40 k.

  I've read many tutorials but FLV and SWF is not in After Effects or Adobe Media Encoder, I don't know how the process would be.

  Please help us.

  Thank you

  WebM for Adobe Media Encoder

  Producing for HTML5 - Adobe Media Encoder tutorial

• How to play videos flash for 40 seconds and then display the Web page automatically?

  That was my question:

  I made a Web page, I want to show a video flash for 40 seconds when the page is opened. Then the Flash video should disappear and opens the web page. How should I do this?

  This was the response:

  Hello

  This would require the use of actionscript inside flash video, which would then redirect to the main website after the deadline runs out.

  (for how to do this you would be better advised in the flash forum -http://forums.adobe.com/community/flash/flash_general).

  Please help me on how to add actionscript code

  If you the only goal is to pass on this page to the index page after 40 seconds, then you can do it in the code of a web page, rather than edit the Flash file.  Just add the following code in the head section of the web page of the video...

• Is in regard to external video playback?

  Hello
  It is a question no doubt very basic, but which proves just the fact that I struggle with As I would like to put a miniature photo on my web page, which would take the Viewer (when he clicks on it) the external video file, which is located on the same server that hosts my site. This video file has name demo.mov
  I guess the tile must be a button? , but I'm not sure. So, the ACE would be:
  
  (onRelease) {
  gotoAndPlay (URL);
  }
  
  I know it's probably wrong, but I'm really lost in this.
  I thank very you much for any help.
  See you soon
  Janek

  my_btn.onRelease = function() {}
  getURL (" http://www.site.com/video.html");
  }
  works in layer actions after that give your button an instance name of 'my_btn', but this can be anything you want

  {We (Release)}
  getURL (" http://www.site.com/video.html");
  }
  work in the actions of the buttons

• How can I transfer my photos to iCloud by using a MacBook Air to an external hard drive?  After downloading, my iCloud pictures can be deleted to free space on my iPhone 6 s?

  How can I transfer my photos to iCloud by using a MacBook Air to an external hard drive?  After downloading, my iCloud pictures can be deleted to free space on my iPhone 6 s?

  Archive or make copies of your iCloud - Apple Support data

  http://www.IMore.com/how-backup-your-icloud-photo-library

• Videos go slowly after a break for a while em

  Yes Hello, as the title says that videos go slowly after I stop em watch on something else, specifically in a site called animeplus.tv I watch the videos, then I stop em for a bit to check something else, or another video on another site, or according to the right, the thing is when I come back to this video and resume playback , it, it gets very slow playback, the sound is fine, but the video itself does not work properly, until now I've just seen this issue happens in this Web site, but is maybe the flash drive? I don't know that I removed an addon that I well that could be the problem but is not. and when I try this on Google Chrome, it works very well, I stop the video recording for other stuff, and the video still plays as usual. so I hope for a few ideas into what it takes to cause I love Firefox and I don't want to transfer to a different browser.

  Hi Slyver1080,
  Thank you for your question, I was wondering what video player you are using. Streaming media services most I never keep a connection for some time and then expires, until it receives a request to stamp the next part of the video. If it expires, it must renegotiate. It will play what she has until the connection is restored and listen to the media once again.

  First, please try these troubleshooting steps and post back with the results:

  • Correct audio and video playback on Firefox for Windows problems