audio is de-energized

Similar Questions

• Problems with the Firewire Audio Interfaces

  I use a Presonus Firebox for all of my recording and playback. I just bought a new pc HP with Vista64 and I had problems with my audio since then. Symptoms include random audio dropouts, crackling sounds when you scroll through the menus in my software, no noise at all from windows media, no windows generally sound player. Everything works sometimes, but inevitably fails. Once the audio is de-energized my only solution is to restart the computer, and then it still doesn't work sometimes. I don't understand. My last computer was a couple of years and built the hand. It worked perfectly with this unit until the motherboard is dead after what I bought my new HP desktop with terrible results. The main difference between my pc and this one is that I was using XP and XP64. However, I have the right drivers for the home and the computer recognizes it but I can't operate consistantly and correctly. This new HP has more power than my last, and more then enough power for my needs recording software. I would like to know, I've been recording music on PC for 8 years. Any advice would be welcome.

  I am now convinced that the long nightmare is finally over. I tested my home over and over again with no failures. Record and playback midi seem to work perfectly. Here's what I did:
  
  1 optimized my computer for audio streaming using the guide written by sweetwater.com.
  
  2 uninstall all the drivers from Presonus and all software, including the removal of all PreSonus files on the registry using the instructions provided by the technical support of PreSonus.
  
  3 disabled WLAN and then physically disconnected from the motherboard.
  
  4. my computer has two firewire ports. The front port was connected to the motherboard via a short cable. I physically unplugged the cable from the motherboard.
  
  5. I bought an Express(1x) PCI firewire 400 card with a Texas Instruments chipset. The exact brand is inner Pro PCI Express(1x) 4 port 1394 a. The firewire card is a power port. I plugged the power jack on the same line, connected to the DVD player. I don't know if it's important, but I'll try to document EXACTLY what I did. The firewire card requires no driver work. It came with a disc with a B.S. video editing software I was not installed.
  
  6. I turned on my computer and disabled the built-in firewire in Device Manager, leaving only the new active firewire card.
  
  7. I installed the drivers from the Firebox from the original disc supplied with my unit (v1.20.0). I had good results from these pilots in the past that may be because I use XPsp2.
  
  8. I have connected the combustion chamber when prompted to by the installation software.
  
  9. rebooted the computer with the combustion chamber connected and everything's fine.
  
  By the way:
  
  The inner firewire card cost me $ 30.00
  
  My computer specs are:
  HP a6745f desktop
  Dual core AMD 5050e 2.6 GHz
  XP sp2
  GigsRAM 4 (3.25 because I'm on XP)
  
  If you are confused in the store on the question of whether a firewire card uses a Texas Instruments chipset. Try to get a glance at the map. You should see a chip bearing the logo of TI: the State of Texas, w / Ti. YeeeeeeeHawwwww!

• Audio randomly abandonment of imported files

  I use Adobe Media Encoder version 9.2.0.26 on an iMac of 2015 running El Capitan with 32 GB of memory and a processor Intel Core i7 to 4 GHz.

  I often import more long music shows (how long and more than an hour). I never had this problem until recently, but to import the concerts, the audio is randomly drop points. It is not a question of creation, because the audio is de-energized when you view the file imported into Quicktime as well.

  

  You can see in the picture above that all five channels of the 5.1 surround stop just halfway through the concert. There is no consistency to the time where each concert is de-energized. The above video has audio abandonment to less than 32 minutes. Other concerts have abandoned 30 minutes, 53 minutes, 15 minutes and 24 minutes. This problem does not occur with shorter files.

  Here is the coder of the journal information:

  -Source file: /Volumes/CAM_MEM/AVCHD/BDMV/STREAM/00008.MTS

  -Output file: /Volumes/Goliath/PremiereFiles/Concerts/SP161003_OldLineStatesmen.mov

  -Preset used: Custom

  -Video: 1920 x 1080 (1.0), 29.97 FPS, sole, quality 90, H.264, 01:05:46:00

  -Audio: Uncompressed, 48000 Hz, 5.1 (L, C, R, Ls, Rs, LFE), 16-bit

  -Bitrate: Target 10 Mbps, 10 Mbps Max

  -Encoding Time: 00:54:55

  10/05/2016 19:54:30: file encoded with success

  Someone at - it no indication as to why this happens and how to fix it?

  Thanks in advance!

  Chris

  So good news... Looking at the location of the media Cache, I noticed the "Clean" button Pressed this button, re-imported files and it seems that they all worked.

  That being said, I do not know why the records covering media and media Cache files aren't there.

  In addition, when the issue started occurring, I have day SOUL and first, but thanks for the suggestion.

  Chris

• Audio problems and mask when reading not on no FULL quality

  Win 10
  I7 6core
  GTX980 4GB - had the same problem with the previous cards + latest drivers are used and have had the problem with older drivers.
  32 GB of Ram
  Body CC2015

  Working with and reading Dragon RED 6 K images on the timeline, the audio track falls inside and out. The meters also stop working when audio is de-energized. It matters little if the audio is the zero song recorded on the RED or if it is external audio synchronized to the top. The issue seems to only happen when the playback quality is not set to FULL quality, what quality is set to FULL rear audio playback perfectly reading Dragon 6 K sequences in real time is a bit beyond my machine if it isn't really a viable option. The question goes as far if I disable the layer with RED film and just play the audio layers so the audio recorded appears to be very well.

  According to the other forum posts, I tried compliant audio to a drive other than the one with the RED film. I also tried to move the audio to another drive as some have suggested that the issue was on the HARD drive that contains the images RED 100% reading. None of these options worked. I can never remember running into this issue Edition and playback of images of RED EPIC 5 K. And did I not the audio problem when working with lower resolution files.

  I also met other issues in trying to work with the Organization of reading other than that of the TOTAL quality. The use of masks on effects GPU accelerated often causes the whole layer to move off the coast of the viewer project or black glitter during playback. When stopped everything of fine. A quick fix is reading quality INTEGRAL, but once again this is not always possible according to the number of applied Visual effects. Also the engine of reading mercury to the software not 'fixed' the issue of the mask, but it's not really useful in practice. Have had the problem of masking for a long time and initially, I thought that it was related with colorista III, so I grew up with the red giant. They were able to reproduce the issue and noticed that it happened with the other native Ppro GPU accelerated effects, meaning that it was a body does not issue a colorista problem. Support red giant apparently passed on the issue to the agency team, but that was back when colorista 3 is out and still no solution.  

  
  Let me know if you need more information.

  See you soon,.
  James

  Update: CC 2015.2

  Masking question can be solved when you right click on the viewer of the program and then click left high quality playback.

  Still no update on the audio issues however.

  Update 2: CC 2015.2

  Audio is de-energized is more if you delete the audio tracks of RED Dragons. Only play .wav files under the Dragon pictures with audio in sync, I no longer get audio drop-outs. This may apply to other codecs as well.

  First step: good audio sync with the zero track.

  Second step: remove the audio tracks of cameras.

  For me, that stops my audio stall and not to come back.

  Update 3: CC 2015.3

  High quality playback is at the origin of files PNG away from their intended position and also no longer works as it did in 2015.2. Not sure about her work at all TBH.

• Windows Media Player-auido jumps during playback of .wmv or .mp3 file

  W7 - 64 bit windows media player audio is de-energized (skips, misses))

  WMP 12 on my laptop Toshiba running W7-64 bit will pop the sound up to 1 second, shortly after starting a song using wmv or mp3 playback. I have been troubleshooting unsuccessfully and reinstalled WMP 12 without any result. How can I solve this problem?

  You never solved this problem? I have the same laptop model with the same question. I solved it by openining control, disabling all the upgrades then go to properties of speaker and switch from 16-bit to 24-bit.

• Premiere Pro 2015.3 problems after update 2015.2

  I'll have a lot of problems after the update to 2015.3.  It is a project which worked perfectly well, a few days ago on 2015.2 (or whatever the previous version was).  Now, audio is de-energized, it does not play smoothly, and everything hangs after a few minutes - I can't move the timeline, it does not meet the up/down keys to navigate to the previous/next item, it is totally insensitive.  Everything worked well until the update to 2015.3.

  I'm running Windows 7 Pro on a 6-core i7 Extreme with 24 GB of RAM and a Quadro 4000 (v354.35).  I have a 500GB SSD for Windows and the creative cloud, 2 TB RAID 0 HDs for swap/cache/work/etc., 1 TB HD for project files, 2GB RAID 0 video source HDs, 1 GB HD for video output (5 logical volumes, 7 physical disks).  This system has flown before installing 2015.3.

  Help, please!

  Published by: Kevin Monahan

  Reason: more concise title

  Hello

  Please mention the operating system you are using?

  For Windows try the step below.

  Please go to Edit Menu of Premiere Pro > Preferences > Media and uncheck the option "Enable accelerated h.264 decoding Intel."

  Note: It is necessary for the Windows Machines

  Once done restart Premiere Pro and check the performance.

  Vinay

• The audio of the main dialog box on Game of Thrones is de-energized

  The audio of the main dialog box on Game of Thrones won after ten minutes two weeks in a row. We can still hear background noise.

  try going into the settings and if surround sound is set to on

  If a set audio to surround and no surround configuration is connected then what you describe is 100% what happens

  99% of dialog box is sent to the center speaker, which, on a stereo speaker configuration is missing because 2 stereo speakers are treated as front left and before there where only background sound plays

• Bluetooth connection problem iPhone - audio system Nissan after upgrade iOS10

  After iOS10.0.2 iOS9 on iPhone upgrade, I got a cordially problem receive calls raise Nissan car audio.

  I can make a call without any problem. Bluetooth connection is stable. I can download address book e.t.c. But I can't receive a call. I see the incoming call on the radio shows. After pressing the button "answer" on the car Audio System, audio between iPhone and Audio streams car breaks down.

  But the cellular connection remains active. I need to rotate the audio output on the screen of the iPhone car for iPhone and back to the car. After that, I can continue my call via the car radio.

  Thanks in advance

  Hello StasV,

  Thank you for using communities Support from Apple. I know having a problem with calls on your iPhone in your car, it's not what you expect. The good news is that these steps will be useful for your problem of phone calls while using the bluetooth in your car. Go to settings > general > accessibility > routing of Audio calls and the value headset/Bluetooth Headset and retest your question.

  Audio routing call - the iPhone user Guide
  Help to connect your iPhone, iPad or iPod touch with your car radio

  See you soon!

• MBA does not play audio on JBL EXTREME

  Hello

  I tried to play music on my new JBL EXTREME of blue tooth speaker that proved no problem on my phone I have 6 s +.

  However, I can't be able to remove from my Mac Book Air!

  It's 'pairs' very well with the JBL speaker sound!

  He has played from the loudspeakers of the MBA.

  No music, no audio from Youtube on the JBL; nothing!

  I run the latest version of the software, and I restarted the MBA and the JBL repeatedly.

  My MBA plays very well with my Sennheiser Blue Tooth headset, so I think that my audio settings are OK. (?)

  Someone has an idea of what the question might be, please?

  Thank you!

  Rut

  Howdy MXP 150 Patriot,

  If you're able to pair your bluetooth with your Mac speaker, but your Mac continues to stream audio from its built-in speakers, you might check to see which device is selected in now Option while you click on the Volume control () in your menu bar. You can also check in system preferences > Sound > output.

  OS X El Capitan: adjust the audio output of your computer settings

  Note If you don't see the Volume control () in the menu bar, you can add it by checking the box "Show volume in menu bar" in system preferences > Sound.

  OS X El Capitan: increase the volume upwards or downwards

  All my best!

• removed the audio tracks in logic pro can be restored

  removed the audio tracks in logic pro can be restored, has been save logic & empty folders to the folder came, I deleted the originals by mistake...

  Not if you don't have the original audio files on your hard drive.  If you have deleted original, your only hope he then restore from a backup of your system, you have a.

• You can change the tempo without affecting/stretch automatically audio?

  My workflow...

  import an instrumental, then add a tempo meter to detect the tempo... can change the tempo of the project... but OOPS, that extends the audio file... How can I change the tempo without changing the audio file? Thank you!

  Region selected: in the region Inspector, uncheck 'follow Tempo and Pitch '.

  This will separate your audio region of tempo changes.

• Audio stuttering on MBPro Sierra

  I'm on a MacBook Pro installed macOS 10.12 retina end 2013 (Sierra).  For several years, I have used a bluetooth JBL of Charge 2 for this portable audio speaker (and sometimes my iPhone and other iPhones).  He has always worked flawlessly.

  Today when I hit play on the audio iTunes began badly stuttering.  After several searches, advice and read everything that I could find (especially regarding similar issues on other versions of the operating system as El Cap, Yosemite, etc.), I did the following, without result:

  • Not matched and repaired the speaker

  • Restarted/rebooted both the speaker and the MBP

  • Reset NVRAM and SMC

  • Redownloaded and reinstalled Sierra

  • Reset NVRAM memory new

  The problem persists.

  Note: I have also been hang this portable projectors in the classroom for several years via a port mini display to VGA and have never had a problem.  Since the upgrade to Sierra, can I talk to is no longer in the spotlight (my MBP always spoke to my external monitors (via the adapter, even) but not the spotlight.  I wonder if these issues are linked, at least to the extent where they came after the upgrade to Sierra.  Thanks in advance for any thoughts.

  Moments after the announcement of this question, I went into my list of connection and uninstalled Knock, an application that allows to unlock the lock screen by knocking on an iPhone.  And here, the sound works fine now.

  I guess I should have posted earlier, because I found the solution immediately after.  At least the bluetooth problem is now solved!

• iPhone 7 lightning to the questions of the audio input jack

  I often connect my phone to listen to music on stereo systems for listening to music out loud. When I used to do with my 6s, I had no problem with the sound output. Since switching to the iPhone 7 that I need to use the adapter to play music, but when I do this the sound is very distorted and sometimes if you put the volume a bit higher up the music stops. Even with a lower volume, it is still quite distorted. When I use a headset with the adapter and plug the phone into my car is fine no problem and sounds. It is only when I play music on the radio.

  I talked to Apple support and they were not really able to diagnose the problem or give me a solution.

  I was wondering if anyone else has problems with the lightning to the audio jack connector or something similar? and everyone is aware of any other superior quality adapters, you can buy or if there is a fix by apple to do deal with this?

  I don't have the problems you describe at all.

  To the extent where a 'solution' by Apple, not sure there is any 'broken' to fix.  Anyway, we are users here on this forum, we would have no idea what Apple would do.  Speculation is prohibited by the terms of use of this forum.

  Best,

  GDG

• DVD player freezes when audio editing

  My application DVD player recently started crashing every time that trying to change the volume of the silent era. The laptop is a MacBook 12 "retina 2015, using an external DVD drive that has worked very well for a year. Have tried on many different DVDs and they all load fine, DVD player auto-commence, but they all open with no sound. If I try to increase the volume of 0 on the slider, the player crashes. If I try to access audio via the menu 'Options' menu does load not for Audio and audio disk configuration is similarly frozen to corruption. Other audio works fine on the machine. Any idea on what could be the problem? Thank you.

  Greetings bhan001,

  Thank you for using communities of Apple Support. It seems you want to play a dvd on the MacBook connected via an external dvd drive. Given that the application crashes using each dvd that you tried it may be a problem with the application itself. There are a few things that we can try to isolate and solve the problem.  I would recommend you read these articles, starting in safe mode disables the 3rd party applications that may interfere with the DVD player application. If the problem persists, we can try a new user to test to see if it's a matter of profile or the scale of the system.
  

  Try safe mode if your Mac does not end commissioning

  How to test a question in another account on your Mac.

  Take care.

• New Audio USB Interface lose sound on El Capitan

  Hi all!

  A few weeks ago that I upgraded my MacBook Pro retina 15 "end 2013 to El Capitan, after that my USB Audio Interfaces (Focusrite Scarlett 2i4) and Safire 6 USB stopped working properly. Both work correctly when they are connected to an iMac 5K running the same operating system.

  I can listen to Audio for some time (about 10-2 Minutes, it is always different), when the Audio starts to crush und get outs, after a certain time there is only silence "click on" come out of the speakers.

  Heres an Audio file of the sound that results from: https://www.dropbox.com/s/5nb96bmdh47kmi2/20160923%20141619.m4a?dl=0

  I already tried to reinstall OS X (starting with CMD R and reinstall OS), reset PRAM and SMC. Nothing has changed the question. Any ideas where it comes from?

  Greetings

  Chris

  It is most likely a software conflict. Note the time at which audio is running out. Open the Console and look for accidents or mistakes at this time.

  The reason why it crashes on a mac, but not the others most likely is related to differences in software installed. Run Etrecheck on touch mac and post the report here.