Audio of unwanted

Similar Questions

• Remove the scratch audio from. MPG file

  I have a file MPEG2 of the videographer with a stereo scratch 192 kHz Dolby Digital AC3 audio stream saved to the camera.  I have a new track audio file of Dolby Digital AC3 5.1 48 kHz 48 kHz, mixed to a multitrack recording was recorded in genlock with video.

  I have created a project Encore CS5.1, adding video to the timeline, removed the audio track and put the new track surround audio replacement.

  I've done this several projects before, but do turn a problem with this one because of the length of the video.   The project checklist yet complains that the project is too big for a 4.7 GB DVD without transcoding, however it would fit if the MPEG2 file was not the audio of unwanted follow embedded inside.

  I really don't want to put the video through a new generation of transcoding.  Is there a way I can strip the audio from the MPEG2 without transcoding it AND replace the. Active MPG in the project again?  Or is it possible to replace the AC3 stream in the. MPG file with version 5.1 to produce an asset with which still accept as a replacement?  

  My desktop is Windows 7 x 64.   I tried using Avidemux 2.6 and still complained that the replacement was not of the same type; It's a moot point anyway because Avidemux has done a poor job of syncing the audio integrated video.

  If I understand correctly what you describe, you cannot replace the file mpg as the asset unless it's another mpeg file. You need to demux the original, put the m2v to this process as the asset and create your project. Then add the 5.1 audio to this timeline.

• Try to get rid of an audio file that is unwanted in the media library and half the music library disappears

  I'm trying to get rid of an audio file that is unwanted in the media library and half the music library disappears and spend a moment difficult to come back. Sometimes the songs I want to keep are followed and even triple, the same file read 3 times. I try to correct the error to remove extras and half the disappears from the list again... That the ho-ha happens?...

  Hello

  Thanks for posting the request in the Microsoft community forums!
  I understand that the songs on windows media player reproduces. To get resolution on this issue, provide us information.

  1. you receive an error message on the computer?
  2. don't you make changes on the computer before the show?

  Method 1:

  Run the troubleshooter in the Windows Media Player library

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter

  Method 2:
  It could be that the Windows media Player library is corrupted. I suggest you follow the steps mentioned below.

  Step 1:

  a. exit Windows Media Player.

  b. Click Start, type %LOCALAPPDATA%\Microsoft\Media Player and then click OK.

  c. Select all files in the folder and then click on Delete on the file menu.

  Note: You don't have to remove the folders that are in this folder.

  d. restart Windows Media Player.

  Note: Windows Media Player automatically rebuilds the database.

  e. launch Windows Media Player and check.

  Step 2:

  If step 1 does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:

  a. exit Windows Media Player.

  b. Click Start, type % LOCALAPPDATA%\Microsoft and then click OK.

  c. Select the Media Player folder, and then click on Delete on the file menu.

  d. restart Windows Media Player.

  Note: Windows Media Player automatically rebuilds the database.

  If you have any other questions about windows, write to us, at any time.

• Unwanted audio ad or spam.

  Several times a day without my fault anything my computer will start an audio advetisment which repeats three times before leaving. The first audio announcement was Ozarka water. The second was Bing. How can I get rid of this nuisance?

  Hi the rebels,

  (1) do when you try to connect to the Internet?

  (2) you use Internet Explorer to access the Web sites?

  (3) since when you are facing this problem?

  I suggest that you run Microsoft security scanner and check if it helps to solve the problem.

  Run the Microsoft safety scanner.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  If the problem persists, please answer with the information to better help you.

• I accidentally blocked play audio and video on the BBC website. How can I unlock it?

  Today, a new video palyed often opens the door to a range of other unwanted videos.
  When my cursor hovered over this video window, engine block sign will appear in the upper right. I clicked on it, thinking that he would block the Stream of videos. Instead, who had arrested ALL the audio AND video games I can get on the BBC website.
  How can I unlock it?

  Hi, please see under the permissions tab and check the setting of the Flash - Page Info window - see technical details on the page you.

  If you are using an adblocker as Adblock Plus, also look at options/filter preferences.

  Either way, you have several version of Shockwave Flash - the oldest should be deleted - How to uninstall the Flash if necessary.

  If your question is resolved by this or another answer, please take a minute to let us know. Thank you.

• How to replace an audio track

  How can I replace an audio track of low quality for a high quality one on Final Cut Pro X? For example, the audio of the film, by audio recorded simultaneously?

  Once I have sync clips, I can't see the two lanes in separate and remove that unwanted, I could do before (see https://www.youtube.com/watch?v=_qfIe6GbkzY). It does not work like that, and I don't know what to do!

  Thanks for the help!

  Myrna

  If there is a clip of multi, you can open it in the editor of the Angle and click on the speaker icon on the clip that has the sound you want to disable.

  Russ

• Working with the source audio 5.1

  Can anyone recommend a good resource / tutorial on the use of origin in FCP X 5.1 sound source?

  Scenario: My new camcorder from Panasonic SC-V770K 5.1 surround audio recordings. I found that, in some areas as small theatres the rear channels pick up lots of unwanted noise, echo and the crowd.

  What I would do in FCPX is to adjust the levels of the rear channels down to focus on the audio to the front.

  But all the documents online and tutorials I found describe how to create a new 5.1 mix, not how to edit an existing levels. Surround 5.1 panoramic options are esoteric and not well documented, and all seem to place the existing channels at current levels in new 5.1 investments. Out the sound of the clip in 6 mono channels is slow work and means that I have to adjust separately and filter all the. 'Mono stereo + 2 2' and '3 StΘrΘo' options are not well explained, and if I switch between them I lose all my settings.

  Any help or advice on how to change an existing 5.1 audio track?

  More specific example: how to adjust the levels of the surround channels in a clip with audio 5.1?

  If I change the audio channel of the Mono 6 element I can individually adjust the level of each track, but the surround mix is lost and they are all pan in the Center. I have to manually the value each mono track stereo Pan, pan L/R and set levels. Great for a clip but there is no apparent way to automate this.

  If Pan Mode the Surround video, I can fix the respective rates of mixture and pan toward the Center with Attenuate. It is the closest, I came if they support Centre at the expense of the L/R.

  Is there an easier way to take a track existing 5.1 and say 'just turn this channel up/down '?

• How to find unwanted contacts sends you a request?

  Hello

  New to Skype, I was wondering how to actually find these unwanted contacts sends you a request?

  This message was transferred from its previous location to create his own new topic here; his subject and/or the title has been changed to differentiate the position of other requests for information and to reflect the content of the post.
  

  Hello

  on Skype, you can search for people by entering just name and it will search all users of Skype for this name.

  However, you can change your privacy settings, and who can contact you in the Skype client in Settings - Privacy tab.

  In Skype for the Web, you can change who can call audio/video or share the screen with you in the same way under settings - privacy.

  I hope this helps.

• How get rid of audio files of your audio file that you no longer need? I have

  How get rid of audio files of your audio file that you no longer need? I went to the project and selected unused files, then deleted. However, there are unwanted files still in my audio file.

  Use this command after you remove unused files from the bin:

  

  http://help.Apple.com/LogicPro/Mac/10.2/#/lgcpce0efc05

• By mistake I have remove the audio drivers of my HP laptop

  By mistake I deleted the repressive of my series of notebook computer g Pavilion audio, when I uninstall unwanted programs and files.

  My laptop have now no sound in the speaker or headphones.

  no media player vlc, wMP, Real player works...

  Please tell me how can I solve this problem...?

  Hello

  Try to use Recovery Manager to reinstall your original sound driver - how to use the Recovery Manager to reinstall the drivers and software is detailed in the document in question on the link below.

  Recovery Manager - Windows 8.

  Recovery Manager - Windows 7

  After reinstalling, restart the laptop.

  Kind regards

  DP - K

• Audio duplication

  I constantly hear old deleted audio on top of new programs.

  Also I can not see how to add new email contacts or remove unwanted ones.

  Hi @Tubbolard ,

  Thank you for visiting the Forums HP's Support and welcome. I'd be happy to help you if necessary. How can I find my model number or product number?

  Looks like a program or a file is running in the background. Have you tried emptying your trash and refresh your PC.

  Please let me know.
  
  Thank you.

• Audio ads on the computer windows 7 Home premium

  Audio unwanted advertisements on computer, what causes them, norton antivirus and norton power eraser.Computer has windows 7 Edition home premium.

  It is caused by malicious software. It is possible that your antivirus program may not have detected. If you have already scanned your computer and it does not detect anything, then your antivirus program may have been compromised already.

  1 restart the computer and keep tap F8 at startup and then start in safe mode with network.

  2 download and run scanners online. They are usually free. Here's a suggestion: http://safety.live.com

  If all else fails, you may need to help in the removal of the virus.

• In Movie Maker, I want to place a photo on a part of a video without stopping the audio from the video.

  It's all in Windows Movie Maker (Windows Vista)

  Example:

  First of all, I want to have a video (with audio),
  change photo (with audio video) and then continue to the same as before (with audio) video

  I have a video with audio.
  I want to put an image instead of the Visual part of the video.
  But in doing so, I want to still the audio from the video to play while the image is on the screen.

  Please help me, I need the answer as soon as possible.

  Hi benlach,

  Welcome on the site of Microsoft Windows Vista Community.  I suggest you try these methods

  Method 1:

  1. drag a copy of the video on the audio / music.

  2. her completely to the left on the track.

  3. right click / Mute the Audio track... now the audio will be separated from the video but still play correctly.

  4. divide the video and to delete an article of the same duration as it turned again.

  Method 2:

  1 divide your video clip on each side of the area where will be the stills.

  2. now... drag the part cut on the audio / music. BTW... If you want to add a second 5 again... Remove 5 seconds of the video clip. (Info below on the separation if you need)

  3. slide your shots yet to the time line and drop them to the location where you have removed the video.

  4. the Audio clip on the audio / music can be dragged to the right or left to adjust its position.

  Info on splitting...

  "Split a Clip in Movie Maker 2.1"

  1. drag the video clip on the timeline.

  2. play the video/audio by clicking on the 'Play' button under the display screen.

  3. you will see the playback indicator (vertical line) to move forward on the scenario.

  4. click on the "Pause" button at the location where you want to cut and type... CTRL + L or click the "Split" button at the bottom of the display screen. (You can also make adjustments by dragging the playback indicator)

  5. as the many coves that you want and delete unwanted items by right click / Delete.

  And... Movie Maker 2.1 shows that all of the other images. To see all the pictures of Movie Maker 2 shows you all-other-frame. While you are editing project, Movie Maker Vista displays each image. It is generally not a problem ignoring middle managers, but sometimes you notice a flickering image in a clip that is a "stray", and you can not see or cut it out. If you apply the Slow - Down - half video effect to a clip in the timeline panel, see you then each image rather than everyone. You can see the frame problem and separate out. Remove the effect of the clamp to return to normal.

  Let me know if that does or does not work. Good luck!

  Hope it will be useful.

  Thank you and best regards,

  Kadoch - Microsoft Support

  Visit our Microsoft Answers Feedback Forum and tell us what you think.

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Windows Movie Maker - releasing only audio, is it possible to publish the exact length of the audio and does not include the lot of silent at the end?

  Windows Movie Maker - have 6 minutes of audio spliced, I would like to publish in the form of an audio clip with no video.  I heard that this is possible, and it all works, the 'framework' includes 6 more minutes of space without air circulation that gets compiled with the planned 6 minutes of audio matching 12 minutes of audio rather than the 6 minutes.  Is it possible to MovieMaker 'See' the end of my audio instend, to include 12 minutes in length with it default?  Should I include photos or video for the project to publish only 6 minutes, instead of the 12 minutes?   I hope this makes sense...

  I assume you are using Vista Movie Maker 6 and not Live Movie Maker?

  It is a problem that I've not seen before... the recorded length must be equal
  at times combined clips on the timeline. I guess it's possible
  If you've done a lot of editing/trimming clips... something was corrupted.

  I was wondering... If you import the .wma file saved in Movie Maker and drag
  it to the timeline... it shows the clip as being the length of 12 minutes? If it isn't...
  Perhaps you could he split and right click Delete unwanted 6 minutes and
  then re-save.

  Divide... drag the playback at the end of the music and the type indicator... CTRL + L
  .. .to split the file then right-click of the unwanted part and click on delete.

  Tip: Unlike clips video... audio clips can be dragged to the timeline, so don't forget
  they are dragged all the way to the left to prevent air from dead at the beginning or
  between the clips.

  It may be worth trying to go to... Tools / Options / compatibility... tab and the left click
  the "All default settings" button before the Save.

  And... If the clips audio source are not the. WMA format... it could be a useful
  try to convert them to WMA before you import into Movie Maker.

• Audio Studio LE-how adjust the recording settings

  Help to install a SONY USB turntable

  Hi all -

  I just got a SONY USB turntable and hooked up with the software (Audio Studio THE), when I recorded it, I picked up a lot of other noise that has mastered the music from the disc.  How can I set my system so that it captures only the record music and not the environmental music?  Thanks in advance

  Laurent of Norwalk

  Hi Laurent,.
   
  1. have you installed the device USB stereo turntable with success?
   
  There might be some recording settings in the Audio Studio software THE. We recommend that you cross check if all unwanted settings are applied that captures the external sound and change accordingly.
   
  See Install a USB device
   
  See Audio recording in sound recorder: frequently asked questions
  You can also contact the Team Sony
   
  Kind regards
  Syed - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.