Audio output level

Similar Questions

• Satellite Pro M30 - audio output problem

  Hello

  Audio output level is lower when I bought this laptop... All of a sudden without any reason. I almost don't hear all the sounds... What is the problem? Software is ok. I reinstall the audio drivers. Once when it was portable sound back to a normal level and after restart, it was still very quiet...

  I thank the of for any advice

  Hello

  He s strange question you described, but first, you must verify the volume control settings in the sounds and Audio devices.
  Check if controls are set to max.
  Also check the application audio sigmaTel. There you can disable power management.

• Error "no audio output device installed" while trying to access the audio

  Title: "no audio output device installed" on Satellite U305-S7448 with Windows 7

  I have a 4.5 years old Satellite U305-S7448 with updates of Windows 7 has had "no audio output device is installed" and a red X over the icon. I uninstalled the Realtek driver and reinstalled. I still have the red X on the "speaker" icon and no sound. The problem happened after taking the laptop to a meeting. I got his back once, but he lost again after taking the laptop to another site again.

  Hello

  -Did you do changes on the computer before this problem?
   
  Method 1: Follow the steps mentioned below and check if that helps.
  (a) right click on the Volume in the Notification area icon.
  (b) click the Read tab.
  (c) right click on the box empty.
  (d) select Show Disabled devices and disconnected devices
  (e) click right speakers and select Enable.
  (f) click right speakers and go to properties, select the option use this device under use of the device.
  Tell him also to move the cursor up in the levels tab and the default value speaket.
  Method 2: I also suggest you to check whether the audio service is running or not.
  (a) click Start.
  (b) type services and search for Windows Audio and Windows Audio Endpoint Builder services.
  (c) ensure that both services are Automatic and started.
   
  Method 3: Restore the system

  Perform a restore of the system to a point prior to the show and check if this solves the problem.

  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

   
  For reference:
  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

   
  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems
   
  Hope this information helps.

• No Audio output CS6 after update to Matrox

  Given that I've updated the driver for Matrox Mini / Max 7.0.2 I have now no audio output to Adobe Premiere Pro CS6. Levels are appearing on the audio player, and the ASIO settings appear normal. Matrox has done something. I thought I would ask here. (I have the file exported and audio is here... so it's just a problem of output connection).

  The audio is normally routed by Realtek Digital Optical Output, which works (audio works with other software.) Adobe ASIO is set on this out of work.

  I think install it Matrox changed the setting... but thought I would ask here on the Adobe Forum first see if there is a solution. Since it's a Saturday. Thank you.

  It is not the setting.  The one you want is on the Read tab.  Put an audio "Audio desktop Adobe" rather than 'Matrox Player' device.

  The Matrox parameter directs the audio outputs audio from the MXO2, the Adobe parameter directs audio outputs audio from your sound card.

• How do I change Firefox's audio output device without restart the browser?

  I often switch between different headsets and speakers using USB audio devices. Whenever I change to another audio device, Firefox does not change its audio output to match my current camera. Other programs/games follow suit when I change my audio device by default and I don't really like should I exit Firefox completely and reopen it to my audio to come through the unit. It is not a huge problem, but when I have multiple windows and several tabs open, it can be annoying to have to restart my browsing session. Tips to deal with this problem?

  Thank you!

  Hello Qwelz, you can test if the problem is still reproducible in firefox 36 3 beta? It must contain a fix for this problem (bug 698079):
  https://www.Mozilla.org/Firefox/beta/

• Is there a way to have Firefox respects the audio output device by default when it has been modified while Firefox is open?

  I've been a Firefox user for many years and I still use it as my main browser. A problem that has bothered me for years lies in the fact that when Firefox is open and I change my audio output device by default, Firefox does not respect this change and continues to play audio through the device that was used to originally. Even if you stop the audio and keep playing, does not change the output device.

  Is there a way that this can be configured in Firefox? Now, if I listen to music online (e.g. Soundcloud) I always use Chrome because it is respect changing the default audio output even in the middle of audio playback device.

  Reproduce:

  1. start audio playback (for example a YouTube video; HTML5 and Flash are affected)
  2. change your audio output device by default
  3. audio will continue to play the original output device

  Thank you!

  Hello there is a bug open for that you can vote for: https://bugzilla.mozilla.org/show_bug.cgi?id=698079

• How to change the audio output for the metronome

  Hello

  I would like to send the metronome (and speech signals) for monitors to the scene in the ear.

  I understand that I can do this in MainStage using different output for the above titles vs. the rest of the 'Concert '.

  I tried to follow the instructions of the Manual:

  Change the audio output for the sound of the metronome

  1. Choose the MainStage > Preferences > General.
  2. In the section of metronome on the general tab, choose another audio output on the shortcut menu to exit.

  PROBLEM

  1. on the general tab, only the outputs 1-2 are available/selectable (likely, these are also by default for all "Concert")

  2. Why is this process in the manual if it is not executable (without doing something to another additional Set up)?

  3. it's probably among the requirements of setting up more critical even easier for using MainStage with a live band, so why am I having to ask for help at all!

  Rant on (its been a long day)

  Grateful for any help to solve cela. I guess I can send the metronome (such as a click track) and speech signals on the same outputs, which are separated from the rest of the Concert... or should I change the outputs on the other tracks and keep the outputs 1-2 for the metronome marks / voice?

  Thanks in advance for all advice and my apologies for my frustration. JM

  To access the output audio, you need an audio interface with several outputs.

• No audio output device is installed

  audio does not work. When I take the pointer to the audio symbol in the taskbar, it reads "no audio output device is installed". pls help me solve this problem

  You upgrade to Windows 10 or was your system shipped with it?  If you can provide information about the system, I will be able to help you.

  In general, if you went you could look for drivers updated on www.hp.com/go/support in support and drivers to see if a new sound driver is available.

• WANTED m6 that no audio output device is installed

  Hi, I was looking at a CD on my m6 DESIRE last night and it worked fine.  Today, I have the speaker with a red icon in the lower right corner of the screen and when hovering over it says "no audio output device is installed".  I tried to uninstall the device driver, but that didn't fix it there.

  The driver for device "IDT High Definition Audio Codec" under sound, video and game in Device Manager controllers also has a yellow exclamation point.  When I uninstall and reboot, sometimes just with the yellow mark again.  If I try to upgrade the driver, I get an error message "Windows found driver software for your device, but has encountered an error trying to install it."  A device attached to the system does not work.

  Help...

  Installation of this driver fixed the problem: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = US & swItem = ob-109687-1 & jumpid = reg_r1002_usen_c-001_title_r0002

• How can I recover my software of audio output?

  I uninstalled my software of audio output by accident because a message came saying that a certain type of file couldn t run because of it so I uninstalled but I didn t know what it is that I uninstall and I put t know how to get back it or down load a new! Can anyone help?

  I have an Equium L300.

  It is normally a driver problem, in order to install the correct driver should do the trick. Please install audio driver for your laptop model. You can find it on the Toshiba support under http://eu.computers.toshiba-europe.com page > support & downloads.

  By the way: do you have some unknown devices listed in Device Manager?

• P7-1430: p7-1430 windows desktop 8 is installed no audio output device

  I have no audio beats; IDT; or even audio outputs detected when I try to open the volume control.

  Hello:

  See if this windows 8.1 driver installation works for you...

  This package provides the Audio IDT high definition (HD) to support of office models that are running an operating system supported.

  File name: sp67043.exe

• Satellite L500-01u012 - problems of audio output

  I have a Toshiba Satellite L500-01u012 and I have problems with the audio output.
  When I plug a headphone or audio output in the audio output port, it does not neutralize the internal Laptop speakers.
  It's really annoying me and I wonder if there is a way around this?

  I have windows 7 Home premium 64-bit sp1 with all the latest patches to update, and I tried to remove, restart and then reinstalling the driver several times without success
  I also got the image of the plant cell to try to fix that and its still nto work.

  I downloaded the drivers from the toshiba support site, but they did not help

  Hello

  Is this something new or you have noticed this problem in the past too?
  Generally by default the internal speakers should be turned off when you connect earphones.

  I put t know what laptop do you have exactly (model number you wrote may not be the right) and what sound card is inside, but please check the audio options in the Panel.

• Satellite T135-S1305 - no audio output device is installed

  Recently my laptop make some loud beep sound,

  The first time I just restart and it was OK but on the last time I restart and it also stopped but now the speaker near the clock symbol is signed with X and there is no sound, "no audio output device is installed".

  What can be? What should I do?

  THX.

  Hello

  Have you tried to install the audio driver?
  For the most part, there is a solution!

  Satellite T135-S1305 is a series of laptop Toshiba us.
  The driver can be found here:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  The Conexant audio driver installation should help you.
  Here is also a nice youtube video, but rather the Sigmatel driver you must use the Conexant driver
  http://www.YouTube.com/watch?v=9lZzBDkpWkk

• Satellite U300-152 - no audio output device is installed

  The sounds are works well when I do update windows, update antivirus and updated some software like adobe air and adobe shockwave but when I open the laptop the next morning, there is a red cross marked in the speaker icon on the lower right of the laptop and it says : "no audio output device is installed".

  I couldn't find the sound and game controller in Device Manager so I'm frustrated. Its been 3 days now, I use the laptop without noise.

  Can you please help me in this matter?

  My laptop is Toshiba Satellite U300-152
  Windows 7 Ultimate but not pre-installed (Vista Home has been the pre-installed)

  I tried to download the latest audio driver from realtek high defintion, but its still does not. Tried several restarts, System Restore, disable antivirus but does not yet.

  I don't know what can be the problem but the fact is that updates Windows update offers some drivers and, in general, you should not install their Mr. with other words, you should only use the drivers from Toshiba.

  What can you do now? Have you tried to reduce the OS to an earlier time (before installing updates) and check the functionality?

  One last thing. Software driver Sound should start with Windows, then please check MSCONFIG > startup if the sound software is listed and enabled it.

• Digital input to Toshiba 46TL-> no analog audio output to amplifier

  Hi all

  When I connect a video source (e.g. computer laptop via DLNA) to my 46TL, output TV audio analog (red/white taken connected to an amplifier) does not work.

  It does, however, watching television.

  Is it possible to configure the TV to read the audio data from digital input (HDMI/DLNA) to the analog output?

  Thank you for the help

  Not quite what series of TLxxx you have, but for example the TL938 supports a digital (optical) audio output port that provides a digital audio signal.
  Why n t connect the amplifier to the TV using this Jack?

  Connectors for component video / audio to the rear of the TV are the ports of ENTRY and not the OUTPUT ports. So, you can send an audio signal to the TV and not the amplifier output.