Digital input to Toshiba 46TL-> no analog audio output to amplifier

Similar Questions

• analog audio output and digital optical

  I just bought a 500-214 with IDT High Def Audio CODEC Pavilion / DTS Sound +.

  Is it possible to get opitcal of audio output digital and analog (speakers/headphones) at the same time?  Stereo amp needs access both to the multizone/source function.  I can manually choose one or the other before the reading - it is clumsy that when audio of of active switching devices will turn off, but a passage to not always light up.  But I really need both active simultaneously for amp work properly.  I also found jack rear speaker to be more stubborn while headphones jack front of switch.

  Hi zombi1,

  Welcome to the HP Forums!

  I did some research on whether or not we can use the analog or digital audio output at the same time, and it is unfortunately not possible.

  Thanks for posting and happy Earth Day!

• best way to digital audio output on 6400?

  Hello

  I have a 5.1 system surround that accepts audio digital via the coaxial and optical inputs. I would like to connect my laptop through one of these contributions.

  When you play a dvd (or downloaded content) with audio digital (IE dolby digital) in my computer (6400), I can only analog audio output through the headphone jack for the moment.

  I read some info with what concerns the spdif adapter or sound card.

  can someone confirm that the spdif adapter works for 6400 and where I can get this? I live in England.

  is his best card and sends audio digital of the surround system without changing it?

  should what sound card I use?

  Thanks for any info

  
  

• You can synchronize digital input with an analog input on a 6034e?

  Is there a way to synchronize the digital input and analog input on a 6043e?

  I tried the test application "SyncAI_ReadDigChan", but it fails during the humor tick Verify():

  "The requested value is not supported for this property value.

  Property: NationalInstruments.DAQmx.Timing.SampleTimingType

  You asked: NationalInstruments.DAQmx.SampleTimingType.SampleClock

  "You can select: NationalInstruments.DAQmx.SampleTimingType.OnDemand.

  I'm currently collecting analog input data for the duration of a digital input pulse.

  Thanks for any help.

  Joe

  No, you can't.

  The problem with E-Series cards, is that they have just static DIOs, so you cannot have their clock.

  You would need a M-series card for that where you have correlated DIOs.

• The iMac has a digital input?

  Hello

  I searched for centuries for the answer to what I thought was a simple question - the iMac has one digital input (optical or other)?

  I know that the headphone port doubles as an analog audio to as well as an optical digital output, but this port also accepts input optical? If not, is it possible to enter a digital signal via a USB port?

  I have an iMac (20-inch, mid 2007).

  Thanks to all who can help.

  AL

  Yes exit usb audio and are truly comprehensive external soundcards, they can have any type of entry and exit of the machine to be desired that they have

  and if they do a driver of OS x for him it's just a matter of connection installing the driver and choosing the entry in system preferences for being that

  https://Flipboard.com/@mariahlolas/top-10-best-USB-external-sound-card-adapters-for-Windows-and-Mac-2016-2017-npa5lltvz

  If the audio minijack that also take in charge the headset for iPhone I believe support the digital input and I don't know if

• TV Toshiba 40L3433DG - not coaxial audio work?

  Hello!
  I'm sorry for my sentence, but English is not my natural language

  I have a problem with a coaxial audio output in TV Toshiba 40L3433DG, which is connected to the home theater LG BH6530T via coaxial converter in French - output optical. Home Theater is not playing the sound of the television but detect a TV - input optical signal is active in home theater settings, after that disconnect the cable TV coaxial, optical entry into a home cinema is inactive. I tried to play sound from TV programs (DVB - C), video from a USB key connected to the TV and YouTube.

  I first thought that the problem is in the coax - optical converter, but I borrowed from my DVD player old parents with coaxial output, I connected the coaxial cable from TV to DVD and home theater has started playing the sound sent from the old DVD drive. In this way, I have eliminated the potential problems with the coaxial cable, converter cable to fiber optics and optical of entry into home theater.

  There's the television... Now my question - does this kind of TV has a special option to activate the digital audio output? In the sound settings, I can choose digital output PCM or compressed. If the TV does not have a special option to activate the output, is the possibility to use a test mode to check the coaxial?

  Posted by bambaja
  

  Hello!
  I'm sorry for my sentence, but English is not my natural language

  I have a problem with a coaxial audio output in TV Toshiba 40L3433DG, which is connected to the home theater LG BH6530T via coaxial converter in French - output optical. Home Theater is not playing the sound of the television but detect a TV - input optical signal is active in home theater settings, after that disconnect the cable TV coaxial, optical entry into a home cinema is inactive. I tried to play sound from TV programs (DVB - C), video from a USB key connected to the TV and YouTube.

  I first thought that the problem is in the coax - optical converter, but I borrowed from my DVD player old parents with coaxial output, I connected the coaxial cable from TV to DVD and home theater has started playing the sound sent from the old DVD drive. In this way, I have eliminated the potential problems with the coaxial cable, converter cable to fiber optics and optical of entry into home theater.

  There's the television... Now my question - does this kind of TV has a special option to activate the digital audio output? In the sound settings, I can choose digital output PCM or compressed. If the TV does not have a special option to activate the output, is the possibility to use a test mode to check the coaxial?

  Hello I have the same problem.
  My tv is 48l5435dg. I tried my Soundbar with a cheaper TV and works very well (so no problems cable or converter).
  I restarted my toshiba repeatedly and sometimes he started working, but just 2 seconds (it loses the signal)
  I don't understand what I have to do!
  All solutions?
  Thank you

• Capture Analog Audio Cassette on Qosmio player

  G163 manual indicates that the SVHS-IN should be used to capture the audio analogue. But same Belkin do not sell a SVHS cable with two RCA plugs / mini-prises on the other end. Or is it safe to the output of a speaker port extension cassette player for entry into the microphone port.

  But which could overload the circuits if the volume is too high. I have the audacity to make the real analog - digital conversion and capture. I am amazed that this a portable Hi-Spec (and expensive) does not come with something as simple as an analog audio line-in port.

  Thank you very much.

  1. you get easily no matter what audio through audio red and white composite input(red-white-yell0w) provided and yellow video.

  2. video (not SVHS) is for video only (image), it cannot carry audio!

  3.I have used windvd creator and the above to convert ALL my VHS and SVHS tapes on DVD with audio and audio video and even dubbed through the input mic for more than a year now (best video with SVIDEO and you must still connect to an audio input to the unit)
  Qosmio comes with a variety of composite video input s video and the split left and right audio inpur with minijack adapter (marked triple minijack)

  Enjoy

• How can I set up a digital input task to read continuous samples?

  I am trying to create an exclusively digital task that will make digital readings at a rate timed by the material using a PCIe-6509. However, when I try to put the task timing as follows (which works on a PCIe-6509), I get the following error:

  Requested value is not supported for this property value. The value of the property may be invalid because it is in conflict with another property.

  Property: NationalInstruments.DAQmx.Timing.SampleTimingType

  Required value: NationalInstruments.DAQmx.SampleTimingType.SampleClock

  Possible values: NationalInstruments.DAQmx.SampleTimingType.OnDemand, NationalInstruments.DAQmx.SampleTimingType.ChangeDetection

  Task name: DigitalInputTask

  State code:-200077

  The relevant parts of my code are:

      public class DigitalInputReader: IDisposable
      {    
          public DigitalInputReader()
  
          {
  
              dataReadyHandler = new System.AsyncCallback (DataReadyEventHandler);
  
  daqmxTask = new DigitalInputTask();
  
              daqmxTask.Configure (Globals.NI);
  daqmxTask.Control (TaskAction.Verify);
  
              daqmxTask.Control (TaskAction.Commit);
  daqmxReader = new DigitalMultiChannelReader (daqmxTask.Stream);
  
          }
  public class DigitalInputTask: task
  
          {
  public DigitalInputTask(): {base ("DigitalInputTask")}
  public virtual void Configure (NiConfiguration niConfig)
  
          {
  
              <= niconfig.digitalinputs.count="" -="" 1;="">
  
              {
  
                  String physicalChannelName = niConfig.Device + "/ port" + niConfig.DigitalInputs [i]. Port.ToString () + "/ line" + niConfig.DigitalInputs [i]. Channel.ToString ();
  
                  String nameToAssignToChannel = niConfig.DigitalInputs [i]. Name;
  DIChannel ch is this. DIChannels.CreateChannel (physicalChannelName, nameToAssignToChannel, ChannelLineGrouping.OneChannelForEachLine);
  
                  c. InvertLines = niConfig.DigitalInputs [i]. InvertLines;
  
              }
  
              var signalSource = "";
  
              This. Timing.ConfigureSampleClock (signalSource, Globals.MachineSettings.SampleRate, SampleClockActiveEdge.Rising, SampleQuantityMode.ContinuousSamples);// Globals.MachineSettings.SamplesPerChannel);
  
          }
  
      }

  The last call to Task.Timing.ConfigureSampleClock, it's which throw errors.

  Of the options available, or SampleTimingType.OnDemand or NationalInstruments.DAQmx.SampleTimingType.ChangeDetection provide the same precisely timed calls that I am familiar with the analog input interruptions.

  How is it possible in a digital task?  I mean, it seems that I could set up another task to do call by material for the production of a clock signal and use the ChangeDetection synchronization mode, but this seems a bit complicated for what should be easy to do.  What Miss me?

  Update: I thought about it.  You cannot call ConfigureSampleClock when the digital input card is a device of 650 x, because these devices have any automated examples of clock.  They are configured to run in mode default finite samples.  You must make all sample synchronizing with these devices in the software.

  Be cautious, however, because the .NET timers ensure they put any faster than their scheduled interval.  In practice, they are usually 5 to 10 ms slow by tick.  This means that if you want to read samples every 100 ms by sample clock, you'd end up reading all 108 ms samples.  All counters based on the elapsed time and number of samples would be away after a few seconds of it.

  Instead, you must do one of four things: write a doggone driver that runs in ring 0 and interfaces with the PCIe card in the required interval (i.e. on NC, not you, in practice), tolerate the inclination of the clock, use a multimedia timer as an interruption audio or video that is more likely to respond to the correct interval, or , my solution, an accurate clock allows you to set the interval of the timer.  I wrote the following code to the timer:

  var CorrectiveStopwatch = new System.Diagnostics.Stopwatch();
  
  var CorrectedTimer = new System.Timers.Timer()
  
  {

  
  Interval = targetInterval,
  AutoReset = true,
  };
  CorrectedTimer.Elapsed += (o, e) =>
  {
  var actualMilliseconds =;

  Adjust the next tick so that it's accurate
  EG: Stopwatch says we're at 2015 ms, we should be at 2000 ms
  2000 + 100 - 2015 = 85 and should trigger at the right time
  var StopwatchCorrectedElapsedMilliseconds = newInterval +.
  targetInterval-
  CorrectiveStopwatch.ElapsedMilliseconds;

  If we're over 1 target interval too slow, trigger ASAP!
  <=>
  {
  NvelIntervalle = 1;
  }

  CorrectedTimer.Interval = NvelIntervalle;

  StopwatchCorrectedElapsedMilliseconds += targetInterval;
  };

  I hope this helps someone.

• Digital audio output F10-122

  can I use hearphone released as an audio output and connect it to an ampl home theater to hear 5.1 DVD? I received the logitech 5500 kit, that can accept a cable coaxial, optical and analog.

  Hello

  I found the information that your device output S/PDIF optical Audio line. In my opinion, it should be possible.

  Check this interesting subject http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=3665&messageID=12229#12229

  Good bye

• Digital input triggering

  Hello

  Is it possible to trigger action digital input using the signal I want to measure? In the example:

  I want to measure PWM on P0.0 after first rising edge PWM on P0.0, but using only this line P0.0 (no PFI in use, only one used digital entry).

  IM using X SERIES USB-6353.

  Some DAQ cards can trigger on analog edge of the signal you want to measure. If a DI data extraction, it is possible to select only the PFI or similar as trigger. What is your application? What you want to achieve?

  I can imagine you could workaround: record streaming samples of DI and do a SW trigger in your program, so you can get the same samples prédéclenchés (as in a digital oscilloscope).

• Static digital inputs N samples

  Is there a way to set the sampling frequency during the acquisition of N samples from a digital input static? I use a USB-6216 data acquisition but the only option of timer is on request.  It seems that daq samples randomly I use acquire N samples.  My goal is to have a level of synchronization between my analog and digital input data for sampling at 500 Hz.

  Hi UpNSmoke,

  Unfortunately, the 6216 can only run DIO clocked by the software. If you use Windows or another non-deterministic operating system, you will be unable to achieve very tight synchronization (or high sampling rate). If you want your two analog and digital input tasks be hardware synchronized, I would recommend something looking from the x 622, 625 x or better yet, the new X-Series range.

  Hope this helps,

  Sean

• Digital input and output problem

  Hello:

  I do a test for digital i/o:
  for a table of the digital signal to an output of data acquisition in the digital input to detect the output signal.
  (bascially, it's like a loop that goes outside the material)

  It's pretty simple, as shown in the attached fichier_1.
  It works well.
  The manual light switch controls, which means that inputs and outputs are ok.

  Then I went on the low level DAQ for better speed, as in attached fichier_2.
  But it does not work. Especially when I pressed stop to abort the loop, an error has occurred:

  To speed up, I went to the low-level data acquisition as the fichier_2 attached.
  But it does not work. Espeically when I press the "stop"button to exit the loop, the error occurs.

  Possible reasons:

  Requested value is not supported for this property value.
  The value of the property may be invalid because it is in conflict with another property.

  Property: SampTimingType
  Asked the valuelarge clock
  You can select: on request

  I don't understand why the sampling time has a conflict here.
  (It is probably just something very simple in data acquisition, but I checked a few examples and did not find a clue).
  Hope someone can give me a suggestion.

  Ultimately, my goal is to make the attached file_3.
  In this one, I generate a digital output, and then lead to the entrance.
  Then I can take it as a signal to trigger my other task.

  Note:

  I use a similar conti signal to control one of my camera.
  I need to sync it with my another task.
  So I think to generate a digital output (which share the same clock as the signal similar to the data acquisition device), then put it in one of the digital input.
  By detecting this digital input, I can trigger my task and synchronize with this signal similar.
  My camera's USB-6211.
  I am aware of the latency of USB, but once the value is a constant value, then the synchronization is always good for me.
  Actually, I was using an analogue at the entrance of the to do it before, it may work, but the synchronization error is too big for me.
  I need to do some calculations/judgment for this analog value, which makes the time difference varies.
  So I'm trying digital entry now and I hope that the digital input can trigger my task with a stable latency.

  Thank you very much

  Have you looked at the specs? It clearly states that the digital I/o is a programmed software. You have not any hardware clock at all. The best rate that you could possibly achieve is around 1 kHz and which would have a considerable jitter the nature of non-determimistic of windows.

• LabVIEW myRIO simple Audio input Audio output exercise

  Hello

  This can be a very simple question, but it's my first time on Labview and I'm having a lot of trouble. I'm trying to plug a speaker into the Audio Out of myRIO boad and connect the audio output to the microphone of my laptop.

  I tried to design a very simple system with a timed loop which contains an analog input and analog output block. Everything I connected at the output of the Anlog entry at the entrance of the analog output. I tried my setup, but I quietly exit form the compound herds.

  Thanks for all the help

  Well, fortunately you are running on an FPGA, you can do the close infinitely fast.

  Try to loop to > 20 kHz, for example. (Audio range).

  There is no example of shipping you are dealing with audio processing?

• With the help of digital input for Boolean control?

  Hello!

  I have spent a lot of time to search but have not found a solution to this...

  I have LV 2015 with chassis NI 9188 and module NI 9425 DI.  Try to use the input signal to assign a State structure machine program and/or events in real time.  It would be acceptable to have an indicator show the status of the input line, since I can use it elsewhere with Value (Signaling).

  Please do not ask for the code - the problem is quite simple.  I just want to use the digital inputs to program control as a T/F.  I want just the program to analyze the State of the input and decisions - a bit like a PLC.

  All I seem to be able to extract is data of digital waveforms with a task DAQmx.

  It's not a trigger - I already use a trigger to start the analog acquisition.

  Formulate the problem in a simpler way...  What to do if you had a digital input module and you wanted to see the status of each input line in the form of a LED on your face in real time.  How would you do it?

  I really appreciate the help!

  greyhorn23 wrote:

  Formulate the problem in a simpler way...  What to do if you had a digital input module and you wanted to see the status of each input line in the form of a LED on your face in real time.  How would you do it?

  I would like to write what has been read to the Terminal.

  From what I can tell, you want to just read a single static value from your digital line.  You can then simply read the value of one and do some logic with her.

• Error in audio - output Satellite P200-1EE - Toshiba HD DVD player problem

  Hello

  I'm new here so I don't know if I'm in the right forum or not, if I'm not I apologize.

  I have a Satellite P200-1EE and tried to play DVDs on Toshiba HD DVD player but everytime I try it comes up with an error message saying "an error has occurred in the audio output settings. Please check audio driver is set up correctly. »

  I tried the update audio drivers but it tells me that I have already installed the drivers the best.

  Any help would be most appreciated.

  Thank you for your time.

  Hello

  What OS do you have?
  What is Vista?

  If yes then another question; have you installed SP1?

  Please also see the European driver of Toshiba page and choose your model of laptop.
  There is a DVD HD v4.32.00 patch reader.
  The other version 4.51.07 HD DVD player is a full version and if the patch won't work, then you must install the full version.

  See you soon