Audio playback with Responsories

Similar Questions

• I still delay audio playback with preview

  I thought that this was addressed in 13.5, but whenever I saw a model that has an audio track, the audio does not play up to 2 seconds in the preview. It's okay if it's space or numpad 0, if the cache before playback is verified or not, etc.. I can't time things properly without having the audio start without delay in a preview. I had this problem with 13.6 so and hope it would be resolved now. Please help, it's really very frustrating.

  Thank you

  Jordan

  OS X 10.10.5

  MacPro end of 2013

  AE version 13.7.0.124

  Sorry, I thought that they mentioned what it is. I know he mentioned somewhere! They said a bug has been fixed, but a different bug (with similar symptoms) is still on the run and they are trying to track them down and crush...

• How to have all audio playback with headphones and replace the speakers

  headphones and speakers - interface

  This is probably a stupid and basic question normally, I'd be embarrassed to ask. But I'm old enough not not to be bothered much more. I would like to have all the sound elements come through the headset and replace the speakers. But when I plug the headset comes through both. It worked fine a few days back, but not now. Help!  Please, I beg you!

  Hi pam1948,

  Here are some steps that you can follow and check if they help you in fixing the issue:

  Make sure that the headset is set as audio device by default.
  
  To do this, follow these steps:
  
  1. click the Start button, select Control Panel, click hardware and soundand then click sound.
  2. click on the read tab.
  3. select headphones and then click set as default.
  4. on the playback tab, select the playback device, click set upand make sure that the configurations are set correctly.
  5. click OK to save your settings.

  Kind regards
  Abdelouahab

  Microsoft Answers Support Engineer

• Slow audio playback with 5.1 speakers (G20) settings

  Hello

  I have connected by the G20 to my amp using the output audio spdif. When I select 5.1 external speakers in the speaker (instead of laptop speakers) configuration screen, the audio playbak is slower by about 50%. I tried several players as WMP, winamp, etc and I get the same result.

  Thank you for your help

  Kind regards
  D.

  Hello D.

  Check it please this http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=3665&messageID=12229#12229 topic. I believe that display Quad will be useful for you.

  Good luck!

• The external speakers with bluetooth audio playback stops working after 20 minutes

  I have a weird problem with bluetooth audio on my Acer Aspire 7600U. I have a bar of his JBL SB200 with support bluetooth and when I'm playing audio to it from my laptop (Sony Vaio) or my phone (Nokia Lumia) it works fine. But during audio playback of the IOA, the soundbar goes off after about 20 minutes in the middle of a song with such as Spotify. I suspect it's something different with the Aspire AIO bluetooth adapter which does not sound bar to stay on. No idea why? Does anyone else have this problem?

  I have now solved. It's another computer, I had who took control of bluetooth speakers every now and then...

• Since the update of my pc based system with 10 windows and install the last Prime Minister CC when I drag a clip on the timeline audio does not come with it. I can hear audio playback in the preview window of small file so the audio is there, but it's not

  Since the update of my pc based system with 10 windows and install the last Prime Minister CC when I drag a clip on the timeline audio does not come with it. I can hear audio playback in the preview window of small file so the audio is there, but it does not appear or play on the timeline. I can drag an audio file of Ms on the timeline, but I need audio from my original file to synchronize my audio file recorded independently - used to be no problem... any ideas what I can not edit now?

  Hi Neil,

  Drag / drop may not work if you don't have any enabl; e source patch or did not target the track for the same thing.

  https://helpx.Adobe.com/Premiere-Pro/using/source-patching-track-targetting.html

  Vinay

• Audio playback on listening? When I started to work with more than 1 audio track.

  Hello!

  I have been using first elements 12 for the full HD video editing.

  Brand new for me just bought it 2 weeks ago.

  Now, during the last two weeks, I had this MAJOR proglem with audio editing.

  This problem is the headache and turn my simple editing in almost impossibilities.

  I had this problem with all my projects. SUBJECT

  Generally, the problem appears when I want to start working with multiple audio tracks.

  At somepoint that my projects just gets ruined, I do not mean just the audio tracks.

  The audio starts to disappear at random all audio tracks.

  It is not only about reading. When I exported the video, the audio has been partly missing, as well as the project.

  I tried to get help on the forums and find all that I could find, but have not been able to solve this problem.

  Small fix helped a little:

  I have the audio export to single track and bring back to the project. It works but I still usually edition more to do.

  I do not understand why reading disappears, I fear that this is a bug.

  I found a lot of problems in previous version on people with the same type of problems, but no help for this version of the program.

  To solve the case, I changed my audio setting in ss12.

  I tried to first WDM Sound and ASIO4ALL V2 components, but same problem on both.

  I have looked up my device for audio playback and ss12 matches are not on mute, and volume up.

  I deleted my first items appdata\roaming\adobe C:\ & first 12 items folder preferences... help do not...

  I press the update about every day in the hope of a new version... But yes, program always tells me it's the last.

  I usually work with 3 maxinum of audio track only. And I do really basic here stuff...

  I have put all my audio to the fore and he gave me the best results, but it does not appear to take the problem by far as at somepoint randomly my audio playback is missing again, randomly through the reading.

  Please someone? I feel desperate here.

  Info about my computer:

  Operating system: Win7

  Processor: AMD Athlon (TM) x 4 955 processor 3.20 GHz

  (vivid RAM) memory: 4GB

  system: 64-bit

  < left download, installation, setting up mod-kglad forum >

  Post edited by: kglad

  Tascruel

  Thank you for asking. I wanted to put that in my last answer and I forgot to do.

  The Adobe party line is that you cannot change a predefined project settings when it is enabled and that you are in the Premiere Elements workspace. I described a way to do in some cases when editing Notepad document of the project saved/closed (project.prel) file.

  http://www.atr935.blogspot.com/2013/05/pe11-changing-project-settings-without.html

  It is often easier to start a new project with the appropriate project preset, blocking the automatic action of the program in this regard. To do

  Open Premiere Elements in his workspace Expert.

  Go to file Menu/New/Project and in the project preset together preset that matches your source media properties. Before leaving the new project dialog box, make sure you have a checkmark next to the "Force selected setting on this project."

  Back in the workspace of elements Expert first, then go to add media/files and folders to your source media in the assets of the project which you drag the media from the source to the timeline.

  Please let us know if it works for you.

  Thank you.

  RTA

  Add it... Check your project settings via Edit Menu/Settings/general project, against the readings, especially in editing Mode, timebase, and image size.

• Need help with audio playback by default/current VISTA device

  Hello
  
  I need to get the current audio playback device in VISTA. It is quite easy to XP because I just get this information from the registry. My understanding is that things are different in VISTA. I was told you cannot change the unit but you can get the device using the following...
  
  -CoCreateInstance (IMMDeviceEnumerator)
  -IMMDeviceEnumerator-> GetDefaultAudioEndpoint (eConsole)
  
  Problem is that I don't know what to do with it. I guess it must be compiled with a library (compiler, library, etc...) I do not have)
  
  So... question, is there already a xtra that can get this information OR I can pay someone to do a xtra using the information above?
  
  If you are able/willing to help, please let me know as soon as possible because the project is due next week. I can pay you through paypal.
  
  Thank you!!!
  [email protected]
  

  Gary with Buddy xtra has been kind enough to add to the collection of boyfriend.

  Thanks again Gary Smith!

• HP Envy stop my Audio playback

  My HP Envy seems to interrupt my audio playback sound and to hear my music, that I have to restart my computer.  In addition, in Services, I tried 'restart' Audio, but it will not respond.

  If anyone knows how to solve this problem, I'd appreciate it.

  Thank you

  

  Only happens with headphones? Your sound works normally on the other speakers?

  In addition, what is your PC model number and what operating system are you using?

• ThinkPad L420 8 64-bit Audio Playback jitter/Battery/Charging distorting Windows - Help -.

  It's so on the only issue that I have with Windows8 on my laptop, I tried different audio provided OEM drivers

  drivers directly from the Realtek site and I can't address the issue

  Only during the loading of my laptop, or when the notebook is on battery occurs blurred or distorted audio playback. Occurs during playback Flash or the local media using tell VLC playback, sometimes the deformation may freeze or block system

  I tried the drivers Audio, video and my BIOS is the last

  Does anyone else know this problem, also the problem of reading is moved under Windows7 when I had it installed

  It seems my Audio problem and a problem of suspension have been corrected in an update provided Lenovo as

  updated a BIOS linked here

• No audio device is installed in the audio playback option

  Hi, I use windows7 family basic computer laptop vaio sony, I started recently in the face of the question with my his laptop. The system is not identify internal speakers and the sound icon is to have a sign of X.

  I tried to update the drivers and all also reinstalled windows again but the problem persists. When I go to the sound icon reading devices it says no audio devices are installed. realtek high definition audio is not visible in the Device Manager section.

  Have tried to reset the default BIOS settings as well.

  Please help what needs to be done now.

  If your computer has problems play a sound, try using the Audio playback problems resolution to solve the problem. For measures and additional information, see o ink below.

  Open the troubleshooting of Audio playback

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-troubleshooterOpen

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx?type=hardware

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  You have a fluorescent lamp next to your computer which could be emitting a rf? This could interfere with the microphone.

  In Windows 7

  Click Start > Control Panel

  Click on hardware and sound

  Under sound, click on manage audio devices

  Under playback (tab)

  Choose speakers you have in your output device

  Click Properties >

  Click levels (tab)

  check if the value is 100% >

  GoTo Enhancments > select Loudness balancing

  Apply and OK

  Should be much stronger now...

  For enhancment bit,.

  and if you have HD realtek soundmanager (R2.37) in your control panel

  Try a classic Equalizer setting

• Audio playback through headphones and speakers

  Headphones or speakers in windows 7, it cannot have them both?

  Looked at other issues, nothing seemed close.

  My machine has dual boot, Windows 7, XP and Vista ultimate and now XP. In XP and Vista I have the speakers and headphones plugged together, playerd noise, so I could use one or the other by plugging them in front and back taken audio.

  This allows me to play during the day with speakers, and then at night with headphones and no round reaching under my desk to remove the cables.

  Now I use windows 7 and many other issues I have with it, I can't play with speakers or headset until I went through a lot stupid click on deactivate one or choose the other as a default value. Why this has been changed in windows 7 after Vista, it seems totally useless logic. I can turn off my speakers with the power button and get the helmet works. Now, I'm either or. So my new IR headphones are wasted. Please, someone tell me there is a work around?

  It's little interference silliness like this that give me want to stay under XP.

  Much thanks in the meantime someone has found a work around.

  I have my Jabra GN9350 both my speakers for computer, audio playback at the same time. :)

  Here's the trick (and it is verified on 3 other systems Win 7):

  (1) R click on your speaker icon, select "Recording Devices" (if you have the sounds dialog box to the top, it's the 2nd 'Recording' tab)

  (2) click on R in the white space, make sure that the TWO "show disabled devices" AND "show disconnected devices" is checked.

  (3) * now, this step will take some thought for each computer used: on my laptop (HP Elitebook) I get a "Stereo mix" device, ACTIVATE this device.

  4) click on properties, click on the "Listen" tab

  (5) check the box 'Listen to this device', also change the drop-down list below 'read through this device' to be your second audio device

  -To check that you have done this correctly, go back to the tab of the dialog box sound reading, you should now see two of your audio devices showing green graphics small displacement.

  Here are the specific parameters that I have on my laptop, maybe this will help you with your settings:

  Speakers - GN9350 (by default the communications device)

  Speakers - SoundMAX Integrated Digital HD Audio (default device)

  Feature 'Listen' stereo Mix - point this device on my GN9350 headset.

  Paul

• Auto volume leveling audio playback

  It's really annoying:

  His sound is amplified to sound at a reasonable level. When a strong part of the song comes automatically to the grave level then produce audio quiet parts annoyingly loud & the annoyingly quiet strong part... Sorry it's the best way I can describe this... once again:

  Only happens when its had seconds on silence (eg. break) - at this time the system begins to 'think' base volumes creeping upward for himself. Then when the song begins again you are treated volume which is quiet quickly when the system realizes, there is a higher level of sound through the...

  It's very frustrating because I use my computer to record & thus need to have audio playback to its correct level - not to the level of the computer think it should play to...

  I've raked by looking for an "auto off" option arrangements and have spent a lot of time looking for an answer online.

  Any help you could offer would be greatly appreciated.

  Thank you!

  Hi pablo647,
   
  Welcome to Microsoft Windows 7 answers Forum!

  We would like to get some more information from you to help solve your problem.

  You use any sound card on the computer?

  You can try to play the song even to a differnet headphones or speakers.

  I think it might be a problem with the sound card drivers.

  You can update the drivers for audio devices and try after that.
  1. click on start and then click Control Panel.
  2. click on system and Maintenance, click System, and then click Device Manager.
  Note that if control panel is in Classic view, double-click System and then click on Device Manager.
  3. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  4. in the device, expland 'sound, video and game controllers' Manager, the "sound, video and game controllers" right click and go to properties.
  5. navigate to the tab Update and then click on set to update driver.
   
  You can also check on the website of the manufacturer of the sound card and check if they have any updated drivers for Windows 7 and you are trying to install it.

  It will be useful.
   
  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.
  

  Visit our Microsoft answers feedback Forum

• Audio playback USB and device names record - the enumeration of devices, device INF file or required device driver?

  My gadget usb audio has two "playback devices" and a "recording device".

  It works with the usbaudio.sys driver, but I want to give each channel separate namespaces.

  I found a way in windows 7 to rename the audio device using UI actions (right click, properties, etc.), but I want to do it via usb enumeration, instead of requiring the user to do.

  USB enumeration has a "output terminal device", which has different categories of devices, but these don't map with different names.

  1. is there a a way to change the name of an audio playback and the recording device using the usb enumeration data?

  2. can I do this automatically on a usb hotplug?

  3. an INF file help?

  4. or I have to write my own driver to rename playback and recording devices?

  Thank you

  b\375

  Hi Brett,

  Thanks for posting your query in the Microsoft Community Forums.

  The problem you are having is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.
  Please post your question in the TechNet Forum.

  You can follow this link to ask your question:

  https://TechNet.Microsoft.com/en-us/Windows/dd361745.aspx?f=255&MSPPError=-2147217396

  For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Buzz audio playback from any computer in the House

  In the last day or two, suddenly my laptop Dell XPS Windows 7 had this weird behavior: when playing audio or video, on youtube or other sites, or locally the MP3 files on my computer with Windows Media Player, every once in a while, there's a hum, kind of like when the judges love not something on one of these talent shows and they ring the buzzer.  It's as if Simon Cowell is right there inside my computer, buzzing just once in awhile, at random moments.  It continues for about half a second, and then the video or the audio continues.

  Then when my wife got home, she was complaining about the same thing on his laptop, which has just begun to happen in the past day also.  She had the same problem that watching videos online, or talking to someone on Skype.  She usually use Chrome or Firefox to watch videos, while I was using IE.  It seems that any software or computer is used, and if the file is local or online, happens as long as there is audio playback.

  Doing some research, I notice that someone described a similar problem happening after a Windows Update 4 years ago, and this person had to update some other driver to be compatible with the Windows Update.  I noticed that there was some very critical updates in the last days, and I wonder if they are responsible.  If it is a driver incompatibility problem, I don't know yet how to solve it.  Any help is very appreciated.  Thank you!

  YES!  I was wondering if it was a question of Dell and would make troubleshooting more tonight.  (I needed to understand why Dell DataSafe kept fails, too).  I had noticed the pop-up blue Dell SupportAssist a couple of days, but don't connect it might have caused a problem.  It seems that it is the culprit, because I've been without buzz since I dropped it and restarted.

  Thanks for the help!