Auto volume leveling audio playback

Similar Questions

• New engine audio speakers are volume levels asymmetrical, even if I double checked all the connections and checked through balances of speaker system preferences. Help, please?

  I have an old desktop iMac to less than 1 year, I've upgraded to El captain of Yosemite.  Just fine, except the quality of the internal speakers.  Yesterday, I received speakers brand new engine audio 5 +.  Hooked by instructions.  Between the speakers volume levels are completely unbalanced. His active in Preferences system - balanced in the Middle, 50-50.  Verified in applications/utilities-audio MIDI output, everything is correctly set.  I can get pay only by the reduction in volume of the speaker on the right to almost nothing, but then I have no more volume than offer the internal speakers.  Any solution would be greatly appreciated.

  You use the audio output from your Mac an entry in your speakers or you cross an external DAC first?

  I also have the A5 speakers +, and I also use their USB D1 DAC which then audio output runs to the speakers.  Yosemite was a constant headache with my setup, but appears to have been eliminated with El Capitan.  I installed OSX to El Capitan, as well as later make a clean-install of El Capitan purely for my wanting a clean and in both cases, the sound system was very good.  Those who speak of fantastic, better that I have owned yet.

  Can you be more specific with how your output of iMac is done?  As usually, always check, then check your connections in your speakers and make sure that the audio cables are intact and not frayed.  If you use the headset, ensure that the headphone cable is robust and doesn't look like not to is damaged/twisted.

  You can consider getting the audio DAC AudioEngine to manage your Mac, as it is much better than one built-in that comes in your iMac.  I use it on my new iMac 5K that I received a few weeks ago.

  http://audioengineusa.com/store/digital-audio-converters/D1-24-bit-DAC

• Have picture but no dsound during playback of dvd videos.have checked the computer volume levels in system tray - everything ok

  Help!

  Picture but no sound when playing dvd videos - have checked volume levels-all seem ok any ideas?

  Hi silverfox16,

  (1) is this problem limited to DVD videos?

  (2) you get an error message?

  (3) what is the file format of the video?

  (4) who application\player you use to play the video?

  Method 1:  Run the troubleshooter of reading, then check

  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  Method 2: Download and install codecs, see the link below
  How can I find a codec?

  You can see the article below for file types that Windows Media Player supports

  Information about the media file types supported by Windows Media Player
  http://support.Microsoft.com/kb/316992

• Level of Volume WMP Audio files

  I want to output volume upgraded WMP files on a flash drive.  They are the same files that appear in my library of music or are these files prior to volume level in WMP?   In other words can I just copy my music library on the flash USB key?

  WMP volume upgraded files do not have their actual volume (or audio) changed. They only contain additional values that are interpreted by WMP when it reads the files.

  If you play the files on the flash drive in WMP, and then they either still leveled volume. However, if you use another player, then it most likely does not recognize (specific WMP) volume of levelling of the values. To get volume upgrade with other players, you probably need to use a third-party tool that does not change the audio data, such as MP3Gain.

• Firefox does not remember volume level on flash for example of YouTube videos files, why?

  Audio and video files always start playing at full volume, rather than to remember the previous volume. Disable all add-ons does not solve the problem, and the problem does not exist when I use other browsers. I tried to go into the settings of my flash (local and global when right-clicking on a video) and say things to allow the storage of data on my hard drive, but it also has not solved the problem.

  Some flash videos in fact retain the status level / mute volume, but YouTube, DailyMotion and others are not among them even if they are working correctly when I use Chrome. This is extremely irritating because it resets the volume up during playback of the playlist.

  I noticed just now that you somehow seem to be two versions of the Flash Player installed. Perform a new installation of the latest version as follows.

  1. From the next page, save the program uninstall handy somewhere, like the office.
     • Uninstall Flash Player for Windows | Adobe support
  2. In the next page, save the installer for other browsers. If you are also using Flash Player in Internet Explorer, also save the ActiveX version.
     • Download Flash Player for Windows Live | Adobe support
  3. Close all applications.
  4. Launch the uninstaller.
  5. In Windows Explorer, try to open the following folders. If they exist, delete them manually.

     • C:\Windows\system32\Macromed\Flash\

     • %AppData%\Adobe\Flash Player\

     • %AppData%\Macromedia\Flash Player\

  6. Restart your computer.
  7. Run the Setup program for the other browsers.
  8. Run the installation of the ActiveX program if you downloaded it.

• Cannot change the default audio playback device

  Hello

  I tried to get a sound via HDMI, but after hours of trying, each solution is to change the audio playback device by default (in the volume mixer). My PC allow me to do so! It just won't change current default device (digital output Realtech). Can anyone help? It's driving me crazy.

  PC is HP Pavilion Slimline model s5395a. Using Windows 7.

  Thank you, Bill.

  > I don't know much about computers
  Then, it is the question, if you want to change things in the bios.
  You can make changes so that the pc will not start, so be careful. If you don't change anything else, save.

  It is described here:
  http://support.HP.com/us-en/document/c01884922

  You can try some of the other steps first, access to the bios is described before step 10.
  You can 'onboard audio' the value 'Auto', or just turn it off.

  HTH
  C.

• Satellite A200 - 1 M 8 - fickle volume level changes

  HIII

  Need help with Realtek HD audio manager _volume level_ littile controller

  Toshiba Satellite A200 - 1 m 8 Winxp sp3... I'm not sure my version Manager realtek audio... but updated to the final version available

  When I adjust the level of the volume, the volume correctly level changes in the integrated... but it is transformed into fickle on the first and the third quarter levels in the volume level of program realtek... which is annoying and may not work with...

  I wonder if there is a way to solve this problem

  Thank you...

  In your case, I would check for an update from Toshiba Web site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Also, check if you have all updates (patches) for Windows XP is installed.

• HP ENVY 4 1013tx - speaker problem, distort / vibrating at any volume level

  I just buy my DESIRE to 4 a week after that this post was created.

  First of all, I have not any common suggestion for burning inside or more. I just use it regularly and have never use speakers over 50% of the volume.

  However, things go wrong when I notice that the speaker do a slight distortion, even at a minimum volume (5%). I tried to disable the software of beats, set Equalizer of the player flat, but the speaker is distorted almost on every music.

  Tried to play some youtube and it is still distortion at all volume levels.

  I have check the card driver its IDT and its updates. No additional software for the audio except for the drive itself.

  Does anyone has a related suggestion this topic?

  I found the similar problem for envy 17... http://h30434.www3.HP.com/T5/notebook-PC-sound-and-audio/HP-envy-17-Windows-7-speaker-vibration-Dist...

  Thank you

  Hello

  Try to use Recovery Manager to reinstall the IDT HD Audio Driver (this will also reinstall the Beats Audio interface) - how to use the Recovery Manager to reinstall the drivers and software is detailed in the document at the link below.

  http://support.HP.com/us-en/document/c01868333

  After reinstalling, restart the laptop.

  When windows has fully charged, use Recovery Manager to reinstall HP Quick Launch Buttons.  Once again, when this has completed,restart the laptop.

  Incase you still have the same question please call the HP technical support and get the speaker replaced.

• How reset Mixer volume levels?

  This should be easy.
  I have several applications launch and tweaked their levels of volume in the volume mixer, so now, several applications have slightly lower volume than others.

  How to reset all easily to match the volume level of system?

  Hello

  Please follow below the steps mentioned and look for the question.

  1. Click Start, click Control Panel, and then double-click sounds.

  2. in the sound dialog box, click the Read tab, click the speaker device and then click Properties.

  3. click on the Advanced tab, click to disable the applications to allow him to take exclusive control of this devices check box, and then click OK.

  In addition, open the volume mixer and adjust the level of the volume of applications to ensure that the volume on the unit.

  If you are still not able to do so, you probably have reset the settings of the volume by reinstalling the audio drivers to match the volume of demand for the volume on the unit.

  See the city link below to uninstall and reinstall the device from Device Manager.

  http://TechNet.Microsoft.com/en-us/library/cc753699 (v = WS.10) .aspx

• No audio device is installed in the audio playback option

  Hi, I use windows7 family basic computer laptop vaio sony, I started recently in the face of the question with my his laptop. The system is not identify internal speakers and the sound icon is to have a sign of X.

  I tried to update the drivers and all also reinstalled windows again but the problem persists. When I go to the sound icon reading devices it says no audio devices are installed. realtek high definition audio is not visible in the Device Manager section.

  Have tried to reset the default BIOS settings as well.

  Please help what needs to be done now.

  If your computer has problems play a sound, try using the Audio playback problems resolution to solve the problem. For measures and additional information, see o ink below.

  Open the troubleshooting of Audio playback

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-troubleshooterOpen

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx?type=hardware

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  You have a fluorescent lamp next to your computer which could be emitting a rf? This could interfere with the microphone.

  In Windows 7

  Click Start > Control Panel

  Click on hardware and sound

  Under sound, click on manage audio devices

  Under playback (tab)

  Choose speakers you have in your output device

  Click Properties >

  Click levels (tab)

  check if the value is 100% >

  GoTo Enhancments > select Loudness balancing

  Apply and OK

  Should be much stronger now...

  For enhancment bit,.

  and if you have HD realtek soundmanager (R2.37) in your control panel

  Try a classic Equalizer setting

• How do reset you all the volume levels of the mixer at the same levels?

  When you manually set a certain level of volume for different programs how you define all programmes at the master volume level?

  do not reinstall the sound driver, use this

  //////////////////////////////////////////////////
  OFF @ECHO

  ECHO Reset settings Volume mixer...

  NET STOP Audiosrv

  NET STOP AudioEndpointBuilder

  REG DELETE "HKLM Explorer\LowRegistry\Audio\PolicyConfig\PropertyStore" /F

  REG ADD "HKLM Explorer\LowRegistry\Audio\PolicyConfig\PropertyStore.

  NET START Audiosrv

  /////////////////////////////////////////////////
  Save .bat & run with admin

• Audio playback altered in Adobe Premiere Pro CC2014Sequence

  We started the Assembly of a draft standard CC2014 - we work with the cloud and all our software are up-to-date Adobe said CC

  The project implemented to the point - we've added an audio track - all played back fine.

  As we finished the project we have had to add a second layer of audio as the last piece will be narrated by 2 narrators one until the customer decides who will read what to keep two audio in the timeline panel, and disable the file on the right. (We did this in the past without problem projects.)

  That's where the problems are developed - poltergeist any as re-read us the sequence we hear various audio ghosts (for lack of a technical term) as - hear us the audio stops playing below at a lower level and distortion - but even more strange - audio playing under another part of the timeline is - so if I turned on the file below , I could now hear 3 track audio playback - 2 turned on and to place and one 3rd-audio lower flat and distorted.

  Troubleshooting steps so far:

  I think that hmm... perhaps it is an audio or a 3rd party software problem - I did so to disable all my audio playback software and send the audio to the desktop - problem still there

  I think hmm... maybe it's a corrupted file - so I open a new project file and import the sequence - problem still there.

  I think that hmm... the second audio is maybe a problem - so I delate all the sound elements to add - a single layer of the audio in the project - now the problem there re-routed self to give me the same problems, but always using the audio line in the sequence.

  I think hmm... maybe it's a problem or a question of platform - I played this sequence back on 3 different computers, ranging from OS 10.8, 10.9 to 10.10

  Some with and without 3rd party software. -problem still there

  After 45 minutes on hold with Adobe - they agreed it needs to be examined by a specialist software - connect and chat - they ask to connect to the desktop - and unfortunately we are disconnected - no call back as of yet.

  Anyone with ideas - I've heard of and seen a lot of problems with 3rd party but I trust, I ruled that - I too confident that this isn't a platform or a conflict of OS.

  It really looks like a corrupted file or a bug in the software.

  Audio files are a standard .mov file is saved with Adobe Premiere Pro 2014 CC capture mode.

  Video files are nothing out of the norm for us - variety of photos, graphics, videos, assembled in a deliciously funny and wonderful way.  Wish just that we could get the audio to work.

  Hi valeriav80637310,

  Welcome to the Adobe forums. We regret the inconvenience that you are currently experiencing with Premiere Pro.

  Please try these steps and let us know if it works:

  1. go in the preferences > media and clean the cache and re - open first to check on the issue.

  2. create a new sequence of a clip that you used in the project by right-clicking and selecting 'new sequence of the clip.

  -erase the media in the new sequence

  -Copy all the files from the original sequence and paste them into the new sequence

  Check on the issue and please let us know more communication.

  Concerning

  Anand Sachan

• Audio playback Jumpy in 2014 CC PP

  In my line of project time, video playback is smooth, but audio playback has not at any time. I'm editing GH3 FullHD 25/50 p. My system should be sufficient:

  I7 4790 3.5 Ghz

  12 GB of RAM 1600 Mhz

  NVIDIA gtx 760, 2 GB

  256 GB SSD for win

  128 GB SSD for cache/overview

  1 T HDD 7,200 for Media and Projektfiles, Auto-save

  What can be the problem? Are there specific audio settings?

  
  

  Help would be much appreciated.

  Best,

  Alex

  Problem solved: I've updated the system RAM to 24 GB 1866 Mhz yesterday. Audio playback now works correctly.

• DSC-RX10. Level audio Rec in the manual online

  Audio Rec level section

  1. it is worth mentioning, that the Audio level, which has been defined in the movie Mode, remains for a shooting in auto mode. It is not so obvious. This means that if one, for example, to reduce Audio level value, he or she must pass in film Mode, do a job, and to return to the Automatic Mode.

  2. Audio level SONY default value = 26 (of Maximum 30). It's too from any point of view. Noise is huge, as well as a level audio itself. This is because the camera has (probably) very sensitive microphones.

  A value of 15 is more than enough of my experiences. I did experiments outside and in the room.

  You could indicate what he troubleshooting section, ask SONY to set a default value lower. Default values are usually exactly in the middle of the scale, in this case 15 of 30 :-)

  You can check it by yourself.

  Kind regards

  Valery

  We appreciate your comments, Valery. We place a high value on customer feedback — helps us to better understand the needs of our clients for possible implementation in future products.

• Audio playback on listening? When I started to work with more than 1 audio track.

  Hello!

  I have been using first elements 12 for the full HD video editing.

  Brand new for me just bought it 2 weeks ago.

  Now, during the last two weeks, I had this MAJOR proglem with audio editing.

  This problem is the headache and turn my simple editing in almost impossibilities.

  I had this problem with all my projects. SUBJECT

  Generally, the problem appears when I want to start working with multiple audio tracks.

  At somepoint that my projects just gets ruined, I do not mean just the audio tracks.

  The audio starts to disappear at random all audio tracks.

  It is not only about reading. When I exported the video, the audio has been partly missing, as well as the project.

  I tried to get help on the forums and find all that I could find, but have not been able to solve this problem.

  Small fix helped a little:

  I have the audio export to single track and bring back to the project. It works but I still usually edition more to do.

  I do not understand why reading disappears, I fear that this is a bug.

  I found a lot of problems in previous version on people with the same type of problems, but no help for this version of the program.

  To solve the case, I changed my audio setting in ss12.

  I tried to first WDM Sound and ASIO4ALL V2 components, but same problem on both.

  I have looked up my device for audio playback and ss12 matches are not on mute, and volume up.

  I deleted my first items appdata\roaming\adobe C:\ & first 12 items folder preferences... help do not...

  I press the update about every day in the hope of a new version... But yes, program always tells me it's the last.

  I usually work with 3 maxinum of audio track only. And I do really basic here stuff...

  I have put all my audio to the fore and he gave me the best results, but it does not appear to take the problem by far as at somepoint randomly my audio playback is missing again, randomly through the reading.

  Please someone? I feel desperate here.

  Info about my computer:

  Operating system: Win7

  Processor: AMD Athlon (TM) x 4 955 processor 3.20 GHz

  (vivid RAM) memory: 4GB

  system: 64-bit

  < left download, installation, setting up mod-kglad forum >

  Post edited by: kglad

  Tascruel

  Thank you for asking. I wanted to put that in my last answer and I forgot to do.

  The Adobe party line is that you cannot change a predefined project settings when it is enabled and that you are in the Premiere Elements workspace. I described a way to do in some cases when editing Notepad document of the project saved/closed (project.prel) file.

  http://www.atr935.blogspot.com/2013/05/pe11-changing-project-settings-without.html

  It is often easier to start a new project with the appropriate project preset, blocking the automatic action of the program in this regard. To do

  Open Premiere Elements in his workspace Expert.

  Go to file Menu/New/Project and in the project preset together preset that matches your source media properties. Before leaving the new project dialog box, make sure you have a checkmark next to the "Force selected setting on this project."

  Back in the workspace of elements Expert first, then go to add media/files and folders to your source media in the assets of the project which you drag the media from the source to the timeline.

  Please let us know if it works for you.

  Thank you.

  RTA

  Add it... Check your project settings via Edit Menu/Settings/general project, against the readings, especially in editing Mode, timebase, and image size.