Mini-Tower Vostro 3900 - MS Office

Similar Questions

• HIS HD 4670 Itceq in Mini-Tower Vostro 200?

  Hello

  I just bought a Vostro 200 Mini Tower System. It is not the slim version. Should be delivered soon. In any case, I wanted to upgrade the video card. The new HD4670 seems to be a perfect choice for the few non-hardcore games. The supply must be sufficient, there is no need for an additional power connector and the card seems to be low. However, the only 4670 card that is currently available is a model of SOUND that has a cooler Itceq attached. The thing is that, while the card is very short, it is a double-slot cooler design and requires little additional space. Could you get it someone please let me know if there is enough space below the graphics card to a dual-slot video card slot?

  Here is a picture of the card itself:

  http://www.hisdigital.com/NewImages/products/HD4670_IceQ_PCIe_500.jpg

  If anyone has any pictures of interiors of Vostro 200, it would be much appreciated.

  Message edited by bboris77 on 11/09/2008 14:55
  Message edited by bboris77 on 11/09/2008 14:56
  
  

• Vostro 200 Mini Tower trying to start, stops, then resumes

  Vostro 200 Mini Tower trying to start, stops, then repeats until you press the power button to interrupt the cycle.

  The power button is orange and fixed

  The blue disk activity light

  MOBO is lit

  All the fans (CPU, GPU, PSU, case) work

  Removed and reinstalled video card

  Deleted and reinstalled memory modules

  Power connectors to reinstalled MOBO

  Battery replaced CMOS

  All connectors are firmly connected, and yet there seems to be no power to the screen or keyboard.

  I disconnected the power, drained residual power and reconnected the power.  The cycle continues.

  I would appreciate any other suggestions on what I can try (as - why the screen and keyboard are not powered by the computer).

  Thank you.

  RJ318

  The power supply could be good, it is best to test with a unit of work "known."

  My thoughts are, interestingly, spend the money on a 9 +-system years?

  But you can buy a motherboard Dell refurbished/used OEM for $24.99 + S & H from here:

  https://www.Amazon.com/Dell-motherboard-Inspiron-systems-compatible/DP/B003CO0WQS

  Note: Unfortunately, while you can make an informed diagnosis, sometimes computer troubleshooting, is diagnosis by substitution.

  Bev.

• Upgrade processor or motherboard on Dell Vostro 230 Mini-Tower

  I have a Dell Vostro 230 Mini-Tower, and the vehicle currently has Intel Pentium E6500 processor. I would like to move on to something better, because my current processor does not meet the minimum requirements of some games I want to play. I was wondering what processor I could update? I know that the new processor has to adapt to the taking of the motherboard, but I don't know how to find out what socket has my current motherboard, or even what motherboard it is.

  I would also like to know, if I upgrade the processor, but instead get a new motherboard, can't I get a motherboard and plug and it will come with a new processor, or he will have to adapt my current processor? Upgrading the motherboard makes much difference to the speed of CPU if I don't actually pass the processor?

  I am running Windows SP3 & DirectX 11, with 4 GB of RAM, and I also have an ATI Radeon 5670 HD graphics card and a power of 300W.

  I have to get a new power supply if I upgraded the motherboard or processor?

  Hello

  I mentioned the list of processors that are also compatible with the Vostro 230 Mini-Tower.

  Number	Code name	Cache	Clock speed	Front side bus
  Q9650	Yorkfield	12 MB	3.00 GHz	1333 MHz
  Q9550	Yorkfield	12 MB	2.83 GHz	1333 MHz
  Q8400	Yorkfield	4 MB	2.66 GHz	1333 MHz
  Q8300	Yorkfield	4 MB	2.50 GHz	1333 MHz
  E8600	Wolfdale	6 MB	3.33 GHz	1333 MHz
  E8500	Wolfdale	6 MB	3.16 GHz	1333 MHz
  E8400	Wolfdale	6 MB	3.00 GHz	1333 MHz
  E7600	Wolfdale	3 MB	3.06 GHz	1066 MHz
  E7500	Wolfdale	3 MB	2.93 GHz	1066 MHz
  E6300	Wolfdale	2 MB	2.80 GHz	1066 MHz
  E5400	Wolfdale	2 MB	2.70 GHz	800 MHz
  E5300	Wolfdale	2 MB	2.60 GHz	800 MHz
  450	Celeron	512 KB	2.20 GHz	800 MHz

  Vostro 230/230 s has been tested with Intel G41 chipset (motherboard) with ICH07 only.

  Motherboard and processor are two different components.

  I suggest you to upgrade the processor.

  Answer just to get help.

  Thank you & best regards
  Mustapha S
  #iworkfordell

• Upgrade card chart Mini-Tower Dell Vostro 460

  Hello everyone. I am completely new to this physical thing of the entire computer, and I would like to help. I am looking to update my current card (NVIDIA GeForce GT 420) chart for my Vostro 460, and I was wondering if someone else had gone through that process or could give me some detailed help. I don't really know a lot of graphics cards, and try to understand those who work with the system I have is a bit confusing.

  I realized that I need to improve my diet (currently 350 watts) in order to get a decent graphics card. I was thinking to get this 500 watt a I've seen recommended on another forum-

  http://www.Newegg.com/product/product.aspx?item=N82E16817151119&nm_mc=AFC-C8Junction&cm_mmc=AFC-C8Junction-_-na-_-na-_-na&cm_sp=&aid=10446076&PID=6146836&SID=f6vge9gxnfbi

  That will fit in the 460 Vostro mini tower, right? Don't want to buy something and then didn't even hold.

  As for the graphics card I want, I'm pretty open with regard to the price range. Basically, I'm trying to run something like Skyrim on higher settings, but I don't need a fool of computer game set in place. Someone here could give me some advice on what I should consider buying?

  Just get a GeForce GTX 750 Ti and you won't even have to upgrade from your diet.  They use 60-Watt and GeForce experience will optimize Skyrim on Ultra settings clocked at resolution of 1920 x 1080 with this card.

  This one HERE is popular and didn't even need any connection of auxiliary groups of power because of how effective power this new chip is and they run very cool, so you'll have no problem at all heat.

• Dell Vostro 220 Mini-Tower power supply

  The Dell Vostro 220 Mini-Tower supports a power more than the factory installed psu and if so how much power does support? I read here and there that it supports 300 to 350 watts... no one knows with certainty? ... Thank you.

  Lonetrapper

  The Dell Vostro 220 Mini-Tower supports a power more than the factory installed psu and if so how much power does support? I read here and there that it supports only 300 to 350 watts... nobody knows with certainty? ... Thank you.

  Lonetrapper

  This is false, as a greater power supply and can be installed.

  Generic standard ATX power supplies, with a 24-pin or 20 + power connector 4 - pin main motherboard, with or without the on/off switch, would be compatible with the Vostro 220 Mini-Tower.

  You should be able to buy a compatible power supply either a local computer or online store.

  Need a power supply with four SATA power connectors.

  Bev.

• Discover Optiplex 755 service tag Mini-Tower model or what?

  Hi, I'm doubting weather my Optiplex 755 is a mini-tower or LTS model.

  I found the following tagd:

  Service Tag:

  ADMIN NOTE: maintain the label removed by privacy policy >

  Express service code:

  ADMIN NOTE: kidnapped by the Express service code privacy policy >

  I can't find an explanation on the Web site.

  Anyone know where I can find the info?

  thanx

  Corresponds to the aspect of the case with the photo in the pdf file below (from L to R, Mini-Tower, desktop, SFF and ultra SFF.

  www.Dell.com/.../opti_755_techspecs.pdf

• Card mother Optiplex 755 SFF fit in a Dell optiplex 745 Mini-Tower dualcore?

  Hello, I might be able to buy a mini-tower Optiplex of second hand, and I would like to install the motherboard etc. my Optiplex 755 SFF.

  Wilting thi made?

  The idea is that, with the Mini tour, I can buy a better GPU.

  thanx.

  No, it does not.   Of the Board of Directors, the number of slots available, etc. is different.

• OptiPlex 745 Mini-Tower - GFX card options?

  Hi all

  I own an optiplex 745 Mini-Tower and I want to install a graphics card. I read the manual and it says that its PCI Express slot is 16 x but I could not find anywhere a response on whether it is compatible PCI-E 2.0 or 3.0. This makes the choice of a quite difficult graphics card. I read somewhere that if I install a 3.0 card gfx, it would be "backward compatible" feel, he would work on a 2.0 interface (isn't that backward compatibility option depends on the entirely gfx card?) Some cards him and others not so I'm not mistaken).

  So, this is the case with this model, or it is indeed a 3.0 interface?

  Could I install a 3.0 card gfx or 2.0?

  Thank you.

  jdj9

  PCI-E 1.0 or 2.0 are very good.  PCI-E 2.1 or 3.0 may or may not be backward compatible. Some R4 R5 R9 of R7 of Sapphire cards do seem to work in older systems like the precision, etc. 490.  I used an ASUS GDDR5 PCI-E 3.0 GT740 and it worked fine in my 745.

  The problem is that the profile for the 16 x power plug changes with version 2.1 and 3.0.  In addition, Sapphire will show they don't support UEFI BIOS systems with their R series cards.

  It is also why the older variety of version 1.0 or 2.0 cards often are not seen at all on the bus 3.0 on new computers.

  The Asus EAH6450 works very well in all models of Dell, in that I have tried.

  Not compatible with USFF or Micro because they have no slots.

  The only new parameter is the secure boot must be extinguished and CSM on for some cards to post.

  ASUS EAH 6450 SILENT card fits all models of Dell who have a Slot PCI - E, meaning that it does not work with USFF due to no expansion slot. The 6450 a 2 X the number of shaders as the 5450 doesn't.

  cs_setInnerHtml ('video_3f98d004-6424-4472-b955-c5b98d6fe85f', ");

  (Cooler) higher performance can be had from ASUS GT740

  GT740-2GD3-CSM 2 GB

  http://www.Newegg.com/product/product.aspx?item=N82E16814121877

  http://www.Newegg.com/product/product.aspx?item=N82E16814121439

  

  

• How much space there is in a Dell Mini Tower Insipron 3847 case?

  I know I should adapt to food and am looking at a power supply 650W, but will that an MSI GeForce GTX 970 fit in a Dell Mini Tower Insipron 3847 case?  I have the video card and you want to upgrade an Insipron unit.  Can't aford an Alienware at the moment.

  Thanks for any help.

  Corsair CS750M is minimum, updated recommended.  FAN single GPU cards 9 inches or fit shorter. If it has 2 or more fans top it will NEVER go in the case of 3847 without hacksawing the drive bays hard on and moving the hard drive to another location.

  10 inches to 12 inches is not physically going into the housing.

• I need two part number in 3020 OptiPlex Mini Tower

  

  The switch and the speaker can help me?  @SpeedStep

  The part number for the intrusion switch is on the white label, you can see on the photo.

  The part number for the company premises will be a white label on the side of the enclosure also.  Internal speaker Assembly 29MKK

  029MKK Optiplex 390 790 990 3010 internal 23mm speaker

  OptiPlex 390 3010 MT Mini-Tower switch button 74XPK

  Dell UC635 chassis switch

  Compatible models: 3010 OptiPlex, OptiPlex 740, desktop OptiPlex 740, OptiPlex 360 Minitour OptiPlex 740, OptiPlex 740 MLK, 740e OptiPlex, OptiPlex 745, OptiPlex 745 Desktop, OptiPlex 745c, 745th OptiPlex, OptiPlex 755, OptiPlex 990, OptiPlex GX520, OptiPlex GX620, OptiPlex XE, Precision T1600, Precision T1650, Precision T3600, Precision T5600, Precision T7500, Precision T7600, Precision T7600, T7600 WORKSTATION workstation

  

  

• Where can I buy a replacement for Optiplex 9020 Mini-Tower power?

  Where can I buy a replacement for Optiplex 9020 Mini-Tower power?

  I don't see anywhere on the Dell website to buy it.

  jayfie

  The OptiPlex 9020 MT supports / requires Dell exclusive 290w, a standard ATX power supply with connectors main motherboard 20/24 pin for power are not compatible, there is no details compatible power supplies available.

  You will need to contact Dell spare parts @ 1-800-357-3355 sales team, to a replacement unit.

  Bev.

• Dell Vostro 200 Mini Tower

  Hello, I just want to ask if my office compatitble with graphics PowerColor Radeon HD 6450?

  Spec graphics card:

  http://Powercolor.com/us/products_features.asp?ID=336

  the reason why I want this card was because I just want the map budget...

  My spec:

  -Intel Pentium Dual Core E2140 1.6 Ghz

  -4 GB OF RAM

  -POWER SUPPLY: 300 W

  Darkcian

  Hello, I just want to ask if my office compatitble with graphics PowerColor Radeon HD 6450?

  Yes. The 6450 has low power requirements and in fact I have one installed in my Vostro 220 s Slim Tower, which has a power supply even lower than that of your mid-turn.

  For what it's worth, I had a 6450 working in a mini-ITX with 220-watt power supply. I had no problems with stability.

• Vostro 200 Mini-Tower desktop processor speed limit!

  1. I would like to increase its speed of 1.6 Ghz at least 3.0 Ghz processor. Is it possible & how I can do?

  2. while I'm there I have to replace or change anything else, the size of the RAM for example?

  Thank you

  17/04/2011

  Marihuas

  The Core 2 Duo E8600 3.33 GHz 6 M L2 Cache processor should work fine, in 200 Vostro with the Version of the BIOS, already mentioned in my post.

  Considers that for Quad-Core Core 2 Extreme QX9650 processor, 3 GHz, 12 MB L2 Cache, it will not work with the motherboard installed in your Vostro 200, for a compatible Core 2 Quad, a card mother G33M03 and a 350w PSU is necessary, I believe that your motherboard is the version with a power supply 300w G33M02.

  Bev.

• Lights diagnostic OptiPlex 3010 Mini-Tower 3 & 4

  Hi all, I'm new to this forum. 2 years ago, I bought a dell optiplex 3010 mini tour, suddenly, it stopped working, I have no screen, no video or any kind of sound, the only thing it does is to turn on the lights of number 3 & 4 on the front panel. What can I do?

  Thank you

  erickfv12

  Hi all, I'm new to this forum. 2 years ago, I bought a dell optiplex 3010 mini tour, suddenly, it stopped working, I have no screen, no video or any kind of sound, the only thing it does is to turn on the lights of number 3 & 4 on the front panel. What can I do?

  Thank you

  erickfv12

  3 & 4 usually diagnostic lights indicate a memory problem, see page 42 here:

  http://FTP.Dell.com/manuals/all-products/esuprt_desktop/esuprt_optiplex_desktop/OptiPlex-3010_Owner%27s%20Manual2_en-us.PDF

  First of all, try the following:

  Remove and reinstall all memory modules and try to start the system, to see if that makes a difference.

  Still does not start, remove all the memory modules [page 14] and then install only one module in the connector 1 and see if the system starts, and if the computer starts normally, reinstall an additional module.
  Do not start, move the module in slot 2 and still a time see if the system boots.

  Still does not start, then remove the first module, and using the other, repeat the sequence described above.

  Still does not start, purchase a new compatible memory module and try that.

  Then, if the computer still does not start, it is possible that the motherboard has failed and must be replaced.

  Bev.