I still delay audio playback with preview

Similar Questions

• How to have all audio playback with headphones and replace the speakers

  headphones and speakers - interface

  This is probably a stupid and basic question normally, I'd be embarrassed to ask. But I'm old enough not not to be bothered much more. I would like to have all the sound elements come through the headset and replace the speakers. But when I plug the headset comes through both. It worked fine a few days back, but not now. Help!  Please, I beg you!

  Hi pam1948,

  Here are some steps that you can follow and check if they help you in fixing the issue:

  Make sure that the headset is set as audio device by default.
  
  To do this, follow these steps:
  
  1. click the Start button, select Control Panel, click hardware and soundand then click sound.
  2. click on the read tab.
  3. select headphones and then click set as default.
  4. on the playback tab, select the playback device, click set upand make sure that the configurations are set correctly.
  5. click OK to save your settings.

  Kind regards
  Abdelouahab

  Microsoft Answers Support Engineer

• Audio playback in preview however do not drag to sequence (video only), worked a week ago.

  Im cloud and all this subscription service began to arrive tonight.  tried rebooting etc still the same issue. AVCHD MTS files using that has worked since I'm on the monthly plan. Audio not hanging out at the scenario. Video only. However, the MP3 files work. AAC no longer works.

  Make sure that an audio track is selected to source patch.

  

• Slow audio playback with 5.1 speakers (G20) settings

  Hello

  I have connected by the G20 to my amp using the output audio spdif. When I select 5.1 external speakers in the speaker (instead of laptop speakers) configuration screen, the audio playbak is slower by about 50%. I tried several players as WMP, winamp, etc and I get the same result.

  Thank you for your help

  Kind regards
  D.

  Hello D.

  Check it please this http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=3665&messageID=12229#12229 topic. I believe that display Quad will be useful for you.

  Good luck!

• Audio playback with Responsories

  Hello

  I wanted to know if I can change the audio for each play back device. for example.  I audio1 like my narration for the desktop (screen1) view. I would like to change the design of the screen even in a Tablet and do screen 2 and a different design for view phone (screen 3). Instead of audio1, can I play 2 Audio and audio 3 for Tablet and phone respectively? I don't want to play 1 audio for all views.

  Thank you!

  Hmmm, thinking out loud a bit here. If you had a different text caption for each breakpoint? Fix then the audio to the legend of this breakpoint. If you want to appear as if he were audio slide, you could just insert a transparent caption for each of breakpoints and have no text but the audio up.

  That's how I would try.

  See you soon... Rick

• Since the update of my pc based system with 10 windows and install the last Prime Minister CC when I drag a clip on the timeline audio does not come with it. I can hear audio playback in the preview window of small file so the audio is there, but it's not

  Since the update of my pc based system with 10 windows and install the last Prime Minister CC when I drag a clip on the timeline audio does not come with it. I can hear audio playback in the preview window of small file so the audio is there, but it does not appear or play on the timeline. I can drag an audio file of Ms on the timeline, but I need audio from my original file to synchronize my audio file recorded independently - used to be no problem... any ideas what I can not edit now?

  Hi Neil,

  Drag / drop may not work if you don't have any enabl; e source patch or did not target the track for the same thing.

  https://helpx.Adobe.com/Premiere-Pro/using/source-patching-track-targetting.html

  Vinay

• I have adobe Premiere elements 13. It will not let me delete audio or do fade in or out. I can move the yellow to the bottom line until the volume reads - 0.0, but the noise is still there during playback. I can click on fade and fade out and the yel

  I have adobe Premiere elements 13. It will not let me delete audio or do fade in or out. I can move the yellow to the bottom line until the volume reads - 0.0, but the noise is still there during playback. I can click on fade in and fade out and the yellow line that chart volume takes a strong recovery or dip at the beginning or at the end of the clip, but there is no change in volume when I play back. What I am doing wrong?

  Rickey

  Thanks for the follow-up report.

  Just a lit bulb. Maybe the answer, maybe a spleen.

  Look carefully at the audio track of the timeline in the vicinity of title of the file.

  

  The title of your file audio timeline shows: level of Volume or something else. If something else, click the tiny triangle where

  the red arrow in the screen shot is sharp and select the Volume and then level so that you end up with

  Volume: level as shown in the screenshot.

  Hope it's the factor involved.

  RTA

• Audio playback on listening? When I started to work with more than 1 audio track.

  Hello!

  I have been using first elements 12 for the full HD video editing.

  Brand new for me just bought it 2 weeks ago.

  Now, during the last two weeks, I had this MAJOR proglem with audio editing.

  This problem is the headache and turn my simple editing in almost impossibilities.

  I had this problem with all my projects. SUBJECT

  Generally, the problem appears when I want to start working with multiple audio tracks.

  At somepoint that my projects just gets ruined, I do not mean just the audio tracks.

  The audio starts to disappear at random all audio tracks.

  It is not only about reading. When I exported the video, the audio has been partly missing, as well as the project.

  I tried to get help on the forums and find all that I could find, but have not been able to solve this problem.

  Small fix helped a little:

  I have the audio export to single track and bring back to the project. It works but I still usually edition more to do.

  I do not understand why reading disappears, I fear that this is a bug.

  I found a lot of problems in previous version on people with the same type of problems, but no help for this version of the program.

  To solve the case, I changed my audio setting in ss12.

  I tried to first WDM Sound and ASIO4ALL V2 components, but same problem on both.

  I have looked up my device for audio playback and ss12 matches are not on mute, and volume up.

  I deleted my first items appdata\roaming\adobe C:\ & first 12 items folder preferences... help do not...

  I press the update about every day in the hope of a new version... But yes, program always tells me it's the last.

  I usually work with 3 maxinum of audio track only. And I do really basic here stuff...

  I have put all my audio to the fore and he gave me the best results, but it does not appear to take the problem by far as at somepoint randomly my audio playback is missing again, randomly through the reading.

  Please someone? I feel desperate here.

  Info about my computer:

  Operating system: Win7

  Processor: AMD Athlon (TM) x 4 955 processor 3.20 GHz

  (vivid RAM) memory: 4GB

  system: 64-bit

  < left download, installation, setting up mod-kglad forum >

  Post edited by: kglad

  Tascruel

  Thank you for asking. I wanted to put that in my last answer and I forgot to do.

  The Adobe party line is that you cannot change a predefined project settings when it is enabled and that you are in the Premiere Elements workspace. I described a way to do in some cases when editing Notepad document of the project saved/closed (project.prel) file.

  http://www.atr935.blogspot.com/2013/05/pe11-changing-project-settings-without.html

  It is often easier to start a new project with the appropriate project preset, blocking the automatic action of the program in this regard. To do

  Open Premiere Elements in his workspace Expert.

  Go to file Menu/New/Project and in the project preset together preset that matches your source media properties. Before leaving the new project dialog box, make sure you have a checkmark next to the "Force selected setting on this project."

  Back in the workspace of elements Expert first, then go to add media/files and folders to your source media in the assets of the project which you drag the media from the source to the timeline.

  Please let us know if it works for you.

  Thank you.

  RTA

  Add it... Check your project settings via Edit Menu/Settings/general project, against the readings, especially in editing Mode, timebase, and image size.

• The external speakers with bluetooth audio playback stops working after 20 minutes

  I have a weird problem with bluetooth audio on my Acer Aspire 7600U. I have a bar of his JBL SB200 with support bluetooth and when I'm playing audio to it from my laptop (Sony Vaio) or my phone (Nokia Lumia) it works fine. But during audio playback of the IOA, the soundbar goes off after about 20 minutes in the middle of a song with such as Spotify. I suspect it's something different with the Aspire AIO bluetooth adapter which does not sound bar to stay on. No idea why? Does anyone else have this problem?

  I have now solved. It's another computer, I had who took control of bluetooth speakers every now and then...

• Need help with audio playback by default/current VISTA device

  Hello
  
  I need to get the current audio playback device in VISTA. It is quite easy to XP because I just get this information from the registry. My understanding is that things are different in VISTA. I was told you cannot change the unit but you can get the device using the following...
  
  -CoCreateInstance (IMMDeviceEnumerator)
  -IMMDeviceEnumerator-> GetDefaultAudioEndpoint (eConsole)
  
  Problem is that I don't know what to do with it. I guess it must be compiled with a library (compiler, library, etc...) I do not have)
  
  So... question, is there already a xtra that can get this information OR I can pay someone to do a xtra using the information above?
  
  If you are able/willing to help, please let me know as soon as possible because the project is due next week. I can pay you through paypal.
  
  Thank you!!!
  [email protected]
  

  Gary with Buddy xtra has been kind enough to add to the collection of boyfriend.

  Thanks again Gary Smith!

• Control Panel does not, audio playback does not

  Greetings.

  I accused several problems on my device.
  Symptoms:

  • Audio playback does not. Troubleshooter does not solve the problem; If clicking on "options to explore" the program gets just closed.
     
  • Not opening Control Panel. By clicking on the icon will display the window, but it will remain a Virgin and load indefinitely.
    After some time, estimated at about fifteen minutes, the window will always understand in the taskbar, but it will not be open upwards (while still showing the blank page on the preview).
  • Action Center to report problems of signature with a Microsoft Account and forcing the user to validate its identity. On trying to click on 'check', nothing happens. Switch to a local account and re - try to sign causes a "Please wait" message permanently on the app settings PC NOTE: accessing the said account from the web or with other devices is quite possible and does not generate any unusual behavior. The password of the account was changed, but this caused no change in the current situation.

  Please note that the above issues may or may not have a common cause. I'm not experienced user, so I am not able to discern the useful information. It should be noted, however, that none of these issues have been already presented, and the machine has worked perfectly so far.

  Thank you for your time.

  Hi, Marcello,.

  Thank you for an update on the issue. I appreciate your efforts to resolve the issue.

  As you have tried almost all the steps to solve the problem, this problem could be by the corruption of the user account.

  I suggest to create a new user account and check if that helps.

  Refer to create a local account

  See also: all about accounts

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you

  Thank you

• Last update broke the audio playback.

  Everyone has had problems with their audio playback after updating to the new tools of gold 5.0?

  My game has roughly around 5 sound effects play.  I just did a player for each effect and then I have them prefetch at load time.   I keep track of what's currently playing and when I want to play another, I stop playing effect, if any, and start the next.

  Now all this code worked for my current game and 4 other games for 3 months.  The old 9550 beta Simulator 5.0 ran something comme.320 and this one is execute.535.  I am about to release my game, but now the testers reported, the game freezes when they improved a.607 ou.612.  So I installed the latest tools and the game will freeze now in the Simulator.  Everything works on my appareil.320

  I can solve the problem if I ever stop/interrupt an active player, but this reduces the quality of audio support still further.  The game freeze Player.start (calling).  He never returns back from this call.  It is stuck at MediaPlayer.transitionWait ().  I tried various fixes such as starts the new sound in the recall of playerUpdate at the end of the media or stopped event.

  I noticed this change.  If I break on exceptions, it appears on the stack.  It was not there en.320 is kind of fish.  Also, it is really hard to run with exceptions now and play the game as it keeps popping up.

  Object.wait(  ) 478
  MediaStreamingManagerImpl$StreamingSessionImpl$ReadThread.run(  ) 1259
  

  Here are the main battery for my thread to update when the deadlock occurs

  Object.wait(  ) 479
  BasicPlayerImpl$ReentrantLock.waitUntilLockAvailable(  ) 734
  BasicPlayerImpl.stop( boolean ) 374
  BasicPlayerImpl.stop(  ) 403
  AudioChannel.play( Player, int, int, boolean ) 201
  AudioEngine.playEffect( int, int, int, boolean ) 155
  Entity.playSoundEffect( int, float ) 320
  Entity.onExplode(  ) 839
  Bullet.onExplode(  ) 319
  Entity.onHitByBullet( Bullet, int ) 829
  Player.onHitByBullet( Bullet, int ) 349
  Bullet.onUpdate( int ) 282
  EntityList.update( int ) 180
  World.onUpdate( int ) 1233
  GameMode.onUpdate( int ) 392
  Game.run(  ) 629
  Thread.run(  ) 378
  

  Here is the thread for the PlayerListener

  MediaPlayer.transitionWait( int ) 540
  MediaPlayer.initialize( int, int, int, int, int, int, int, int, int, boolean, int, int, String, String, String, int, int ) 169
  StreamingMediaPlayer.initialize(  ) 615
  StreamingMediaPlayer.doPrefetch(  ) 535
  BasicPlayerImpl.prefetch(  ) 214
  PlayerImpl.start(  ) 366
  AudioChannel.playerUpdate( Player, String, Object ) 259
  BasicPlayerImpl.notifyListenersAsync( String, Object ) 195
  PlayerNotifyListenerThread.run(  ) 94
  

  Looks like I'll have to ship this game with special options.

  If you see swimming colours everywhere in the field because of the broken fog?  Select this check box.
  The tracks on the tanks move? Suppose your texture matrix support is not so hot. Select this check box.
  The game is sometimes crash when the sound effects are on?  It's true, check this box.

• Any way to mute audio while (RAM) Preview frames are rendered?

  I scoured the boards to do this and I can't seem to find an answer. My system is working well, but since the new preview function, (formerly 'Preview RAM') has been implemented whenever I give an overview of the system "beeps" audio, image by image, such that it makes. It's as if she strives to re-read everything to 1 or 2 images per second, including audio. It is extremely annoying when you have made a long enough with audio necessary for reading, especially with a customer in the room, trying to make a phone call while the system leaves escape 'PPE.... " EPP... EPP... PPE' a few minutes wile the timeline bar is becoming green.

  Of course, you can manually cut the machine while rendering that is happening, but is possible to return to the fashion preview RAM worked? In other words, to cache all frames before trying audio playback?

  My apologies if I missed this in the preference settings or boards.

  S.

  Hello Stephen,

  What is the version of After Effects that you use?

  If you are CC 2015 go to After Effects > Preferences > Previews and check the option that says "Mute Audio at the premiere is not real-time.

  Vinay

• audio playback problems

  Hey Gang,

  Anyone who experiences problems with AE CC2015 audio playback during the "Preview"? Audio playback intermittently. Very frustrating.

  MacBook Pro (retina, 15 inches, end of 2013)

  2.6 GHz Intel Core i7

  16 GB 1600 MHz DDR3

  Intel Pro Iris 1536 MB

  NVIDIA GeForce GT 750M

  Can you describe a little more clearly?

  Are you talking about audio stuttering during the preview? There is an option, you can check in the preferences that turns audio off until you get a real-time preview.

  Are you talking about starting that a second or two after the preview begins to play in real time? If so, this is a bug which is a high priority for a fix in the next update of the month, but you can sorta work around by checking the box that I mentioned in the previous paragraph.

• Audio playback altered in Adobe Premiere Pro CC2014Sequence

  We started the Assembly of a draft standard CC2014 - we work with the cloud and all our software are up-to-date Adobe said CC

  The project implemented to the point - we've added an audio track - all played back fine.

  As we finished the project we have had to add a second layer of audio as the last piece will be narrated by 2 narrators one until the customer decides who will read what to keep two audio in the timeline panel, and disable the file on the right. (We did this in the past without problem projects.)

  That's where the problems are developed - poltergeist any as re-read us the sequence we hear various audio ghosts (for lack of a technical term) as - hear us the audio stops playing below at a lower level and distortion - but even more strange - audio playing under another part of the timeline is - so if I turned on the file below , I could now hear 3 track audio playback - 2 turned on and to place and one 3rd-audio lower flat and distorted.

  Troubleshooting steps so far:

  I think that hmm... perhaps it is an audio or a 3rd party software problem - I did so to disable all my audio playback software and send the audio to the desktop - problem still there

  I think hmm... maybe it's a corrupted file - so I open a new project file and import the sequence - problem still there.

  I think that hmm... the second audio is maybe a problem - so I delate all the sound elements to add - a single layer of the audio in the project - now the problem there re-routed self to give me the same problems, but always using the audio line in the sequence.

  I think hmm... maybe it's a problem or a question of platform - I played this sequence back on 3 different computers, ranging from OS 10.8, 10.9 to 10.10

  Some with and without 3rd party software. -problem still there

  After 45 minutes on hold with Adobe - they agreed it needs to be examined by a specialist software - connect and chat - they ask to connect to the desktop - and unfortunately we are disconnected - no call back as of yet.

  Anyone with ideas - I've heard of and seen a lot of problems with 3rd party but I trust, I ruled that - I too confident that this isn't a platform or a conflict of OS.

  It really looks like a corrupted file or a bug in the software.

  Audio files are a standard .mov file is saved with Adobe Premiere Pro 2014 CC capture mode.

  Video files are nothing out of the norm for us - variety of photos, graphics, videos, assembled in a deliciously funny and wonderful way.  Wish just that we could get the audio to work.

  Hi valeriav80637310,

  Welcome to the Adobe forums. We regret the inconvenience that you are currently experiencing with Premiere Pro.

  Please try these steps and let us know if it works:

  1. go in the preferences > media and clean the cache and re - open first to check on the issue.

  2. create a new sequence of a clip that you used in the project by right-clicking and selecting 'new sequence of the clip.

  -erase the media in the new sequence

  -Copy all the files from the original sequence and paste them into the new sequence

  Check on the issue and please let us know more communication.

  Concerning

  Anand Sachan