Audio problem: Audio continues even when a pause button slide

Similar Questions

• Text-to-speech audio continues to play for any other slide - but the current slide is suspended from the output

  Captivate 8.0.1.242 - Windows 7 64 bit - swf format.

  
  

  I have this weird error. I have the audio text to speech in my classes. I don't want the PlayBar of captivate. So I have buttons in the content to navigate forward. Each slide is hanging out and waiting for the user to click on the buttons navigate forward. My sound works for the first 2 slides text. Otherwise said, he plays as in the timeline and then stops. Waiting for the user to click on the button before you go to the next slide and the same routine. But after 2 blades, it will not stop. He continues to play the whole audio other slides in the whole cptx. But the current slide is suspended. So I hear everything supposed to be played for other slides, but all I see is a slide.

  
  

  When I click on the next slide, he begins to play the audio where it supposed to start for the current slide and plays again all other text in audio from the other slides. This is repeated again and again. Anyone have any idea why this is happening?
  

  Check the calendar for audio clips, increase the duration of the slide a little and make sure that there is a small space before and after the clip.

  Sorry wanted to add a screenshot, but this feature is currently disabled on this forum.

• NCAA games go to bad audio device, even when I say o/s otherwise. How to replace Firefox?

  I guess that's a FF issue, since everything else seems to work OK. I have a USB headset plugged into the USB hub under my desk. I use the properties of the Audio devices > Audio in the control panel (XP Pro) to switch between the headphones and speakers of the laptop.

  The problem is that I can't sound through Laptop speakers playing games via Firefox NCAA without unplugging the USB headset physically. I hate to crawl under my desk to do it. If I tell the OS what speakers to use, do not change it. I should be able to force audio to speakers for computer without physically disconnect them. I use my laptop to a large number of web conversations with my helmet, but I don't want to physically disconnect when I what to listen without headphones.

  No sooner had I posted my complaint that I discovered that other applications have the same problem, although I said otherwise. And FF works fine if the USB headset is activated as the device by default until I start FF (or tab maybe the FF). Maybe the 'problem' is the operating system, if it does not notify a change of aircraft FF. Or, maybe the problem is FF, if it does not acknowledge the notification from the OS.

  In any case, I now have a work-around that seems compatible with other applications on Windows. However, any other ideas would be appreciated always. I think that changing the operating system's audio playback device must notify immediately and performed by all applications using the headphones/speakers/whatever, regardless of when the application started.

  Bye... done so far

• HP Pavilion DV7 laptop: Touchpad, sometimes active, even when the power button is pressed on off (light orange)

  I use a wireless mouse (or a wired mouse) preferably instead of the touchpad.   The touchpad has a power button to press - white light indicates on and off Orange light.    After booting, I usually disable the touchpad and mouse wireless, however, sometimes when you type I realize my palms are contacting the touchpad and the cursor jumps around accordingly.    The touchpad is disabled (orange light) but I can control it with a finger, it works like its supposed to as if it is enabled.     Any ideas?   I have not downloaded a driver updated or do anything to try to solve this problem, as I fear, it could actually cause other problems.

  Update the driver it is the usual Council for problems - that is the solution here?   Has anyone else had a similar problem.    Most of the touch pad problems I've read is in regards to an erratic touchpad - nothing to do with 'on' or 'off' problems.

  HI @WayneCM,

  Thank you for your inquiry. I will do my best to help you!

  I understand that you use the power button / stop to turn off the touchpad.  Sometimes, you will notice that your palm is in contact with it and the cursor is accordingly jump around but the rest light orange, to show that he has disabled.  Here is a link for HP Notebook PCs - using the touchpad and ClickPad (Windows 10). Please review the section on "Open the properties of the ClickPad" in figure 4, you'll see there's a button where you can disable the touchpad, until you want to reactivate it. Please let me know if this helped.

  Thank you! If it helps you to find a solution, please click the button "accept as Solution" down below in this message. If you want to say 'Thank you' to my effort to help, click on ' Thumbs Up ' to give me a Kudos.

• Translation problem click / highlight boxes when copy and paste slides from another project

  I am baffled by this problem because it doesn't seem wise. I opened a new project to record a simulation, and when I did, I copy and paste all the slides in the section in my "Master project" If you want to. After the dough, I noticed that all of the boxes, clickboxes and highlight, I had taken the time to carefully resize were all out of wack in terms of position. Here are the best, I opened a blank project and copy and paste the same slides... this time the click and highlight boxes were in the correct position. Any ideas?

  Thanks in advance,

  Neel

  Oh, 'in position '... I see...

  The project is bigger than the other? For example, the original perhaps to 800 x 600 and the new to 850 x 650?

  Positioning can then be turned off relatively...

  Take a few elements of the sample and note their x / y positions of the properties panel, in the first draft (under 'Transform' in CP 5.5).

  After pasting in the new, note these same x / y positions.

  Is there a significant factor?

  If this is the problem, make sure that the sizes are the same, make the dough, then expand the project later (and maybe everything will keep its anchors?)

  I have not seen that happen in new versions of CP.

  You can try to check "Keep the Proportions" option in the properties of the original, just in case where this helps to "compel the position" too... guess total...

• Laptop frequently is off and does not restart even when the Start button / stop is held in

  I have a notebook dv7-3060us running Windows 7, some mornings (every few days or weeks), I find, powered out and does not.  In press and hold the power button for 5-10 seconds has no effect.  I have to unplug and remove the battery to restart.  What happened several times.  I tried it with the battery removed, and it fails again, then.

  A software problem can cause this?  I thought that holding the power button causes a material interruption and the BIOS takes over.

  Is there a known hardware problem which can cause this?

  Thank you

  Adam

  Hi Sean,.

  Thanks for the suggestion.  Unfortunately, the steps listed for a hard reset was precisely what was needed to market every day.  So, we did about 50 times.  The real issue was whether a software problem could cause the phone to require a hard reset every time.

  After not getting no response for a few weeks, I have restored your computer from a backup, I made after the update in the first place and then re-set everything.  So far, it has remained stable, which brings me to the conclusion that it is, in fact, a software issue.

  Kind regards

  Adam

• Possible for the AA to continue playing when minimize?

  AA (3) stops playing when I select another program or to minimize.  Is it possible to change this?  I need to be able to view multiple windows while listening to programs registered to compare scripts, adjust the volume controls a sound card, etc.

  I use Reaper as my multitrack DAW and it has no problem to continue reading when I minimize it or click in another application.

  Thank you.

  Ryan

  Go to Edition > Configuration of Audio material and UNcheck the ASIO Driver output box in the background.  Which will make ensure that Audition will keep driver ASIO sound card and not allow it to be "hijacked" by another program.

• pause button on the front panel

  Hello.

  I try to run synchronous, continuous analog conversion of 2 cards of PXI-6259, and capture the State of the several digital at the same time.  I managed to get everything is configured and working properly, however I have a problem if the user presses the button "pause" on the front panel.

  From what I can tell, acquisitions of data will continue to run in the background (I'm using a task DAQmx and stop was never called).  For my analog inputs, this is not a problem.  However, the digital inputs always generate a ' 200010 - on-board memory overflow error. Due to the limitations of system and/or the bandwidth of the bus, the driver could not read data the device enough fast to follow the flow of the unit. »

  Is it possible to register for an event of user interface that is generated when the user presses the button "pause", so that I can stop the acquisitoin of data before the error occurs?

  Thanks in advance,

  -Rich

  NormPgh wrote:

  I thought to add my own button "pause" / control, but my users have become accustomed to hitting the pause on the front panel button, and it will be difficult to get them to change.  I guess that the error would remind them :-)

  Well, that's easy to fix - change the appearance of window properties if the toolbar is not visible, while the code runs, and there will be a pause button for your users to click.

  Many of our applications have a function somewhat like this.  My colleague implementation in a very simple way: he put the graphical indicator within a box structure.  Connect a Boolean control "pause" to the structure of the case, and that's it.  Data acquisition runs constantly but will only update the chart when the pause button is false.  This approach might work for you?

• How to stop a slide pause button?

  Hi, I use CP 9 on Windows 10.

  I'm 9 Essential Training on Lynda Captivate, and the teacher showed me how to use a form as a button to enable / disable subtitles.

  However, the shape is a pause the slide at some point, as you can see in the screenshot.

  (I can see from the video that the guardian is having exactly the same problem, but it does not it)

  How can I stop the pause button slide? I just want that he be sitting there for the entire project.

  Thank you very much!

  

  Will not start ranting about the lack of comprehensiveness/good practice courses for Lynda.com Captivate (I like and I use it all the time, for other applications such as Photoshop, Illustrator, Audition,). The essential to know is the chronology (in basic training I always spend at least half a day for this feature), and you won't find much about it in training. For me, it's basic training!

  Go to the properties panel for this form button and turn off stopping there.

  I see you are using this form to a normal slide button. Why not put on the master slide main if you want for the whole project? Let me also indicate that your form is a break at 7 seconds, preventing several images to appear. The button will disappear at about 13, 5seconds, which means that the user will no longer have the ability to enable/disable CC? Longer life for the rest of the slide (CTRL-E).

  I am planning a new version of this old article to deal with the new deadlines of built-in effects, but maybe you'll find some ideas anyway:

  Small timeline Tidbits - Captivate blog

  Take a look at this tutorial where I describe the use of a shared action and States for several buttons to toggle:

  1 share = 5 buttons toggle - Captivate blog

• App gets paused / frozen just after start in gpu mode (audio continues to play)

  Hello
  You just bought a playbook!

  I have an existing Air application on android and iOS, I am now test it on playbook.

  With the rendering of the cpu, its normal, however when I put gpu in the descriptor of the app, the application stops all headphones rendering and the event just after starting the application, audio continues to play and the debugger remains connected.

  I am new on the playbook, I see there are power saving mode, maybe something is asleep?

  I tried:

  QNXApplication.qnxApplication.addEventListener(QNXSystemEvent.STANDBY, qnxStandby)
  
  internal function qnxStandby(e:QNXSystemEvent):void {
          trace("sent into standby ----------------------------------");
  }
  

  but nothing is ever attributed...

  The app works well on older iphones and android phones, I can't imagine I'm overloading the gpu.

  I use flash builder 4.6 and that's how I am structured:

  Pseudocode

  -addChild (loadingImage.png);

  -load game.swf

  -the addchild (game.swf) full,.

  -removeChild (loading image)

  When I load the main file game.swf, how it works, I get a few tracks, I can see it, but it's when he stops just of all activities and traces except audio.

  the swf so good, I can load this way using the cpu on the ok of the playbook, and I can load this way on android in cpu or gpu mode.

  Any help is really appreciated, thank you!

  -nick

  The problem was caused by the stage.quality example layout: stage.quality = StageQuality.LOW; This caused a freeze more often on the playbook. Being new the the playbook, when I read about the power API mode I thought what was related, but no, it was just a blocking of the application, where the debugger and audio arrives to stay connected and reading. hope this helps someone else.

• Photo Story 3 cannot join the audio of the video program, get the error message, even when you try to select the files audio mp3

  Photo Story 3 impossible to join several video (audio) to program songs that has been created, an error message that it cannot accept the format audio, even when you try to select the files mp3 audio.

  Hi BeverlyHeuer,

  I suggest that you convert the music file to convert it into .wav format and check if you can contact.

  Photo Story 3 for Windows: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-XP/help/digitalphotography/photo-story-FAQ

• Problem with the sync audio to video when you use Windows Movie Maker version 6.0

  I have a HP Slimline Pavillion S.3220.uk PC, using Windows Vista Edition Home Premium. I have problems with the audio video synchronization when using Windows Movie Maker, version 6.0, I 'get' raw AVCHD files to .wmv using voltaic HD.  I've noticed that the audio and video are out of sync, ONLY after the first thumbnail.  No indirect problem with videos, but when people talk to the camera, in case of DISASTER, as he is out of sync. I tried to reduce the resolution of 720 p and 540 p, and no solution to the problem. Any thoughts on the matter please?

  Hi Fabian119,

  Today, there are hundreds of audio and video codecs in use. Some were created by Microsoft, but the vast majority of codecs have been created by other companies, organizations or individuals. By default, the Windows operating system and the player includes a number of the most popular codecs, such as MP3, Windows Media Audio and Windows Media Video.

  There might be times, however, when you want to read the content that is compressed with a codec that does not include Windows or the default player (for example, a file compressed with the DivX video codec or the Ogg Vorbis audio codec). Because the player is extensible, in many cases you can download the necessary codec on the web for free or for a fee.

  You can visit the following links for more information on codecs:

  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

  You can also view the following link to download the audio file conversion programs and check if you can convert AVCHD to Mpeg.

  Convert music, videos and photos from one format to another

  http://Windows.Microsoft.com/en-us/Windows-Vista/convert-music-videos-and-pictures-from-one-format-to-another

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• HTML5 video: video freezes regularly while only audio continues to play. Firefox 12, Linux, Centos 5 up to date.

  whenever I find a YouTube video on my linux (Centos 5.8, completely up to date) using Firefox12 machine, YouTube still offers for me html5 instead of Flash video. It would be nice, but intermittently the video stops (while the audio continues to play). I click on the (I don't know how it's called) cursor to the current position and the video will move again. until he paused next time, anywhere from a few seconds to a few minutes.
  I don't know why he delivers html5 instead of flash, I get on my laptop using centos 6 and firefox12 flash video. Is there a way to configure Firefox to get flash instead? If this isn't the case, I would be grateful for help when the video component setting stopping.

  You may be on the Youtube html5 trial. http://www.YouTube.com/HTML5

  mha007, these three macromedia inks are more for Windows and not Linux.

• Windows Media Player play about half of the clip, then the picture cuts off, the screen goes black, but audio continues to play.

  Windows Media Player play about half of the clip, then the picture cuts off, the screen goes black, but audio continues to play.  Just reinstalled MP 11, same problem.

  Hello

  · What is the number and the model of the computer?

  · This occurs when you are working on any specific file format?

  · Were there any changes made on the computer?

  · You play the file in mode full screen?

  Change hardware acceleration

  a. you can try to change the hardware acceleration in the middle and check (you can try another level too.)

  b. right-click on a space empty on the desktop.

  c. go to the resolution of the screen.

  d. click Advanced settings, and then click the "troubleshooting."

  e. set hardware acceleration in the middle. (Here you'll get the only option your video card sound support).

  You can also check: you receive an error message of codec or audio plays video but does not play when you play media files in Windows Media Player 11: http://support.microsoft.com/kb/926373

• * Media Player stops. My drive stops, then recovers itself after a few seconds. Screen goes black for 1-3 seconds, BUT Audio continues!

  I have Vista Ultimate, but I'm not very smart PC!   When I try to watch a video clip, etc., SEE above EDIT.  My drive stops, then recovers itself after a few seconds.  Screen goes black for 1-3 seconds, BUT Audio continues!  Then Visual back for a while until that the same thing never happens again anywhere!  Also the FAN spins-up like a jet plane taking off!   Help, please.  Thank you.

  Hi Peter,.

  1 have had any changes made on the computer before the show?

  2. which media player you use to play the video?

  3. the problem occurs on all the video clips?

  I would say as update you the video card drivers and check if the problem persists:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  If the problem is not resolved, please respond with more information to help you best.

  Thank you.