Audio quality for the HTML5 Canvas mode problems

Similar Questions

• How to change the audio output for the metronome

  Hello

  I would like to send the metronome (and speech signals) for monitors to the scene in the ear.

  I understand that I can do this in MainStage using different output for the above titles vs. the rest of the 'Concert '.

  I tried to follow the instructions of the Manual:

  Change the audio output for the sound of the metronome

  1. Choose the MainStage > Preferences > General.
  2. In the section of metronome on the general tab, choose another audio output on the shortcut menu to exit.

  PROBLEM

  1. on the general tab, only the outputs 1-2 are available/selectable (likely, these are also by default for all "Concert")

  2. Why is this process in the manual if it is not executable (without doing something to another additional Set up)?

  3. it's probably among the requirements of setting up more critical even easier for using MainStage with a live band, so why am I having to ask for help at all!

  Rant on (its been a long day)

  Grateful for any help to solve cela. I guess I can send the metronome (such as a click track) and speech signals on the same outputs, which are separated from the rest of the Concert... or should I change the outputs on the other tracks and keep the outputs 1-2 for the metronome marks / voice?

  Thanks in advance for all advice and my apologies for my frustration. JM

  To access the output audio, you need an audio interface with several outputs.

• CarPlay audio quality of the voice when it is connected through the USB port is poor vs Bluetooth on Pioneer AVH-4200NEX

  Hello!

  I recently installed a Pioneer AVH-4200NEX unit, I was super excited to improve my car with the support of CarPlay, and everything works great except for one thing.  When I connect my iPhone (6s +) to the unit via a USB cable and a standard phone call, the audio quality is very bad - hail, very downsampled, and metallic sounding compared to the use of Bluetooth via the unit to pioneer for the same phone call (I'm on LTE, using HD voice, although the quality difference is quite noticeable on the calls not HD and on the 4 G calls).  I looked for an answer to this question, but the best that I can find mention of limited USB bandwidth and try to juggle than the bandwidth for the rest of the CarPlay experience, although I don't buy not because audio via the iPhone connected with USB playback is just as clear that it is through Bluetooth.  So my question is: How can I submit a bug report Apple about this behavior and (b) do you have other CarPlay users also be known this recent problem on a unit of Pioneer NEX (AppRadio included)?  It would be great if this is a bug of Pioneer for which they can release a firmware update, I'm just worried that it is a codec problem specified by the CarPlay, so non repairable.

  Thank you!

  -Seth

  Hello served,

  Thank you for using communities of Apple Support.

  I understand that when you use the USB cable for your iPhone in your car with the audio CarPlay is mediocre. I know how it is important for you to hear your calls clearly. In a situation like this, I recommend the steps described in the following article to help solve the problem.

  Configure CarPlay to use with your iPhone

  Specifically the section to get help:

  Get help

  If CarPlay does not work as you expect, here's what you can check. After each step, try to use CarPlay again.

  1. Make sure that Siri is turned on.
  2. Restart your iPhone and your car. Depending on your car, you can see the CarPlay home screen when you turn it on. If you do not, look for the CarPlay logo on the screen of your car.
  3. If possible, connect your iPhone to a different USB port in your car.
  4. Try a different lightning to a USB cable. Make sure that the cable is certified.
  5. Update to the latest version of iOS.
  6. Check the manual using your car. You may need to install updates of firmware for your stereo.

  See you soon

• A1700n not allowing the installation of audio drivers for the audio device.

  HP a1700n

  Windows xp sp2

  recently installed a new hard drive and reinstalled the operating system from scratch.

  When attempting to install the driver for the audio device, named as "Audio device on high definition Bus" I'm an abupt with a blue screen stop referring to * RltekAUD.sys* * (hot flashes too fast to get the entire message.)

  Before you install the new hard drive, the system worked well.  I tried the fix suggested by HP, 4 different realtek drivers.

  I tried to install in safe mode, which installs without error, but no sound, and regualr mode restarts, causes the blue screen with the error above.

  Rotate the processor Dual core AMD Athlon 64 x 2 3800 +.

  I disconnected an additional device and can't seem to get my sound.

  Anyone else having a similar problem?  Fix known?

  It was an exhausting fix.  However, a problem that seems prevalent with machines of OS that came with Vista, but got XP installed on them.

  The problem is resolved: that is the solution and the method.

  First, I tried to reinstall the operating system and installing the drivers in a different order.  -WORK

  I reinstalled the operating system and tried to install the driver in safe mode, partial correction, pilot would install, but would not start in standard mode - WORK NO

  Downloaded and tried 5 Realtek driver different solutions all the way from rolling back or front - WORK NO

  SOLUTION THAT WORKED-

  Found this in another forum:

  Log in to regedit, search for "bus auu", delete all entries

  delete "" busMicrosoft UAA HD audio driver " since the Device Manager"

  Restart in safe mode

  install the version 2.02 driver realtek

  Restart in safe mode

  audio work

  relocation of bus Microsoft UAA HD audio driver

  SOLVED

• Dell xps 13 2015, flat and dull audio quality of the headphone

  Hello!

  Everyone knows that the quality of the sound with headphones is very flat and bad? I have no response in the bass at all. The programe of MAXX 3 does nothing that improves the real audio output. Support told me that everything goes well with my system, only that it is like that. Electronic music is unbearable. There is nothing wrong hardware wise with my headphone jack is just the missing frequencies that drive me crazy.

  Hi Martin.

  Just brought portable 9343 and facing same issue on the new installed Windows 10 Insider Preview. His helmet is low compared to my other devices (laptop HP, Tablet Google Nexus 7). Bass is VERY thin... Looks like a cheap helmet.

  Can't say about the sound in Windows 8.1 (out of the box), because I wasn't listening sound on preinstalled system.

  I spent about 5 hours to solve this problem and found a possible workaround. Try it, maybe it will work for you also.

  1. official audio driver download: URL

  2. extract this file to a folder. Install the drivers, reboot the system. After installation delete extracted folder.

  3. find the "Intel (r) Smart Sound Technology (Intel (r) OSH)" Device Manager system devices.

  

  4. click on 'Update Driver' on the driver tab.

  

  5. click on "Browse my computer for driver software".

  6. in the next screen, click on "Let Me pick from a list of devices on my computer.

  7. click the 'Have disk' button and navigate to the folder extracted in step 2.

  9343_Audio_Driver_X22K2_WN32_7422.118.0_A01\RealtekAudio\RealtekI2SAudio\Fre\Isst

  8 select the file 'IntcADSPDELL.ini '. Click on open, OK.

  9. uncheck the "Show compatible hardware", select 2nd device and install it (click 'YES' on the caveat).

  

  10. after the installation, open the Manager Realtek HD tray and TURN OFF MaxxAudio3.

  

  That's all.

  After this step, I have same sound as on my other devices. Without * MaxxAudio improvements.

  Good luck!

• people will be banned for the use of mods for drunk dark on pc?

  I was watching to see if it is safe (by safe I mean may not be ban for it) to use the mod for drunk dark on pc. But I don't know if this is a ban or not. I would use the mod 60 fps, but I won't use it if I can be ban for her.

  Hello Brian,.

  Thanks for the reply.

  You can contact games for Live Support.

  http://support.Xbox.com/en-us/browse?product=games&category=PC-games

  http://forums.Xbox.com/GFW/technical_support/f/253/t/8569.aspx

  Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.

• CREATE INDEXES online is waiting for the TX = 4 mode

  Hello

  I have a strange blocking problem where an INDEX CREATE LINE is waiting for a transaction that did only inserted a line in the parent table.

  Wait is mode TX = 4 (not TM locks) and I currently have it reproduced only on 11.2.0.3 and 11.2.0.4

  Easy to replicate the schema SCOTT:

  Session 1:

  SQL > set time on

  14:54:58 SQL > insert into SCOTT. Dept (DEPTNO, dname) values (50, 'test');

  1 line of creation.

  Session 2;

  14:55:24 SQL > create index test on SCOTT. EMP (ename) online;

  It's waiting ' enq: TX - line lock conflict ":"

  SQL > select sid, chain_signature from v$ wait_chains where blocker_is_valid = 'TRUE '.

  SID CHAIN_SIGNATURE

  ---------- ----------------------------------------------------------------------

  603 ' SQL * Net client message' < ='enq: TX - line lock conflict '

  While waiting to acquire the lock of transaction in mode 4:

  SQL > select * lock gv$ where sid = 603

  INST_ID SELECT ADDR KADDR SID TYPE ID1 ID2 LMODE CTIME BLOCK REQUEST

  ---------- ---------------- ---------------- ---------- ---- ---------- ---------- ---------- ---------- ---------- ----------

  1 00000006CDA05EB8 00000006CDA05F10 603 352577 0 4 0 348 2 AE

  1 00000006CDA06078 00000006CDA060D0 603 DL 779505 0 3 0 308 2

  1 00000006CD9FABE0 00000006CD9FAC38 603 DL 779505 0 3 0 308 2

  1 00007F28001F5028 00007F28001F5088 603 779505 0 2 0 308 2 TM

  1 00007F28001F5028 00007F28001F5088 603 779510 0 4 0 308 2 TM

  1 00000006CD9FA240 00000006CD9FA298 603 779505 0 4 0 308 2 OD

  1 00000006B4F26790 00000006B4F26808 589847 711499 6 0 308 2 TX 603

  1 00000006CDA0ED68 00000006CDA0EDC0 655377 996169 0 4 308 TX 603 0

  I've traced 10046 and 10704:

  broadcast message = obj 29231196672 #= 779514 tim = 1447251053634045

  ksqgtl * mode TX-000f001e-000ad97c = 4 flags = 0 x 10001 timeout = 21474836 *.

  ksqgtl: xcb = 0x6bb322528, ktcdix = 2147483647, topxcb = 0x6bb322528

  ktcipt (topxcb) = 0 x 0

  ksucti: init logon has of txn DID:

  ksqgtl:

  ksqlkdid: 0001-003F-0000AFC4

  ksudidTrace: ksqgtl

  ktcmydid(): 0001-003F-0000AFC4

  ksusesdi: 0001-003F-0000AFC3

  ksusetxn: 0001-003F-0000AFC4

  ksqcmi: TX, f001e, ad97c mode = 4 timeout = 21474836

  2015-11-11 15:11:36.566

  WAITING #140700792578680: nam ='enq: TX - line lock conflict ' ela 42932082 name = | mode = 1415053316 usn < < 16 | location = sequence 983070 = obj 711036 #= 779514 tim = 1447251096566283

  And there is nothing in V$ SESSION leader/block/line current. class obj # is EMP. current sql_id is the CREATE INDEX.

  If anyone has an idea on:

  -Why creating an index in line must wait for transactions that modified only parent table

  -How to continue the investigation

  -can or cannot reproduce in other versions

  Thanks in advance,

  Franck.

  I guess you have a constraint foreign key between emp and Dept.

  It's expected behaviours: since 11.1 any DML at one end of a referential integrity constraint translates into a mode lock 3 taken at the other end, and your phenomenon resembles a side effect of this.

  When you try to create the index online that your session must assume that the other session (holding mode 3 on the emp and dept) may have changed the emp and dept, so it must wait for the session to the commit or rollback.

  (I guess that in principle, he could walk the cancellation of the transaction see if EMP had in fact been changed - but maybe who was considered too complicated to be worth the risk to implement)

  Concerning

  Jonathan Lewis

  Updated - I just did a quick check to reproduce the effect on 11.1.0.7

  For reference - here are a few notes on modes of locking and how the application has changed over time: https://jonathanlewis.wordpress.com/2010/06/21/locks/

• HTML5 canvas settimeout problem

  Hello

  I have a problem with html5 canvas settimeout.

  I created a round drawing object, the instance name is ball. The following code

  Code:

  This.ball.x = 1000;

  setTimeout (calledFun, 500);

  function calledFun()

  {

  Alert ("fun called");

  This.ball.x = 100;

  }

  The function of this code is worked, alert view only. But ball x position not changed.

  So please help me

  Thanks in advance

  you have lost your reference to "this".  Try:

  var tl = this;

  This.ball.x = 1000;

  setTimeout (calledFun, 500);

  function calledFun()

  {

  Alert ("fun called");

  TL.ball.x = 100;

  }

• Rendering of the HTML5 Canvas

  This is regarding the rendering of the scene animation HTML5 Canvas (animate CC).

  The rendering of the animation is slow on the Windows operating system. And rendering animation is not smooth on browser.

  Please provide any solution for this.

  Few things to note everything by publishing your files to HTML5 canvas target.

  1. the filters and effects of color on the symbols are very expensive by the calculation and are cached (automatically) while rendering. Try to reduce as much as possible these as they will cause the internal animation within any symbol of caching to freeze.

  2. try to use the Cache as Bitmap to the complex static vector shapes wherever possible.

  3 try to minimize acceleration in the classic tweens.

• Where is the HTML5 Canvas publish setting "make sensitive &gt; scale to fill the visible area"?

  I'm trying to publish my flash converted to project canvas HTML5. I'm used to be able to scale the output in the browser dynamically. Looking at the available documentation and online help, that I can see that there is a setting that seems to be what I'm looking for.

  Documents to create HTML5 Canvas to animate CC

  But the screenshot of the creation of the publication is not what I have on the screen, the whole Middle section is missing.

  https://helpx.Adobe.com/animate/using/creating-publishing-HTML5-canvas-document/_jcr_conte nt/main-pars/image_376055745.i...

  using animate pro 2015.2?

  If Yes, attach a screenshot of what you see in the publication settings.

  If this isn't the case, please update.

• Audio mixing for the preview takes too long

  Dear all people on the forum.

  I had a problem with the video preview in after effects CC, for awhile. I find the problem that he had just "Audio Mixer to Preview". This process is very long compared to other processes during the preview rendering. When I disable the audio preview on the Preview Panel, the preview began almost instantly after the preview has been triggered. Audios are easier to deal with videos, it's taking boring too long. Also, I noticed that the more layers, the graphics and audio files are added to the file, the longer it takes for previewing start. Help, please!

  There is probably nothing wrong. EI audio capabilities are severely limited and it doesn't all in time real mixture worth mentioning. It can only play a limited number of audio tracks in real time, and those who must match the settings of your audio driver, since that's what it is based on. All files that is not conform to the specifications as well as incompatible driver audio settings force resampling. Similarly, compressed as MP3 files, it will be decoded fully first and then mixed. Don't say things could not be better, but you should get used to. If you provide system information and more details about your project it may be possible to certain optimization...

  Mylenium

• Audio drivers for the audio integrated 7.1 do not install it?

  Hello Forum!

  So I've been running my r4 Aurora for nearly two years now and I recently updated my GPU so it works oddly.

  Right now, I am currently trying to run two heterogeneous maps using one as a PhysX processor and the other as the main map rendering.

  So that it works, I had to remove my Sound Blaster Recon3D PCIe and I tried to install the realtek drivers in order to use the integrated 7.1 Audio chip on the MOBO but it refuses to install. That or I'm using the wrong drivers.

  I was wondering if someone could help me to get the drivers to work so I can continue to use my double card set up.

  Thanks in advance!

  Currently the version:
  gyazo.com/8aab672a60ecb5fd83d84f6f7ecb8e69

  Hi, on the photo you provided there is a reference to the audio, saying: there 'Razor Kraken USB '.

  Try to remove this device and it's driver.

  Also, you connect the cable to the motherboard that used to be in the back of the soundblaster card?

  Try running driversweeper and removing the remaining fragments.

  This is the Realtek driver, just in case you have bad news, it's to win 8

  http://www.Dell.com/support/home/au/en/audhs1/drivers/DriversDetails?driverId=05W1J&FILEID=3151148565&osCode=W864&ProductCode=Alienware-Aurora-R4&LanguageCode=en&CategoryID=au

  You can also try messing with the audio configuration inside the Control Panel, it may be only one card is trying to make audio and a tent show, it will take perhaps just a few adjustments

• Payment for the purchase of Creative problems cloud photography Plan

  I tried to buy the Plan (monthly) of photography CC, but I encountered problems with payment (I used Google Chrome).

  I contacted Adobe Taiwan, and their representative informed me to use another browser; She said that their systems registered as a browser problem.

  I tried to use Safari, but the problem persists. I contacted the Bank for the card I tried to enter, and they replied that they have not received a notification in my attempt to purchase the plan - so that far from all the signs point to the payment of Adobe system does not properly. Can anyone help?

  Thank you in advance.

  Hello

  Contact Adobe sales to Adobe | Sales

  Please write if it helps!

  Kind regards

  Shelly

• Makes the X 1 audio support for the CDM in carbon?

  If I get the carbon, I would like the option to connect it to my TV HDMI port. I guess that there are adapters for the mini display port HDMI. But he also does support audio? Or I need to connect audio separately?

  Yes X 1 MiniDP is supported audio even when you use the MiniDP to HDMI.

• Grid of 2014 for the cc Illustrator snap problem

  Since the update as a result of cc2014 for the last week, grid snapping in Illustrator has been terrible. Literally nothing of really aligns with the grid.

  
  Did someone shares this problem? Does anyone have a solution to this?

  And Yes, I've disabled 'snap to grid of pixels.

  I'm working on a mac with os x 10.9.3 running.

  Thanks in advance!

  It is not a bug.

  New rectangles are rectangles still alive. Living rectangles cannot be aligned to the pixel grid because it would break their.

  What you need to do is to convert your direct rectangles to paths (using the command object > shape) then the snap to grid of pixels (by checking the option in the transform Panel). You can do it for all of them at once.