Audio setting in Windows Movie Maker XP

Similar Questions

• Saving audio settings of Windows Movie Maker in the film project file

  I understand how to adjust the volume of my audio track, but when I save the file, in the sound adjustments are not saved.  Is there an extra step in the audio recording?

  Hi Gmamma,

  Try the two methods mentioned below if you don't him have not yet tried and check if it works.

  Method 1

  The audio settings by default in Windows Movie Maker is for the audio portion of imported video and any narration or music that you add to play at an equal level, but you can change that setting if it does not give you the balance that you want. To adjust the audio levels, follow these steps:

  (a) click Tools, and then click Audio levels.

  (b) do one of the following:

  to increase the level of audio on the Audio track that is part of a video clip, drag the slider toward Audio from video.

  II. to increase the level of audio that is located on the audio / music, drag the slider to Audio / Music.

  (c) click on close.

  Method 2

  Adjust the volume of each audio clip individually, as follows:

  1. on the track Audio or Audio / Music of the timeline, select the audio clip that you want to adjust the volume.

  2. click on Clip, point to Audio, and then click Volume.

  3. to adjust the volume, do one of the following:

  ·        To reduce the volume, drag the Audio volume level slider to the left.

  ·        To increase the volume, drag the Audio volume level slider to the right.

  ·        To cut the video, select the Mute clip check box.

  ·        To restore the volume to the original volume, click reset.

  Audio setting in Windows Movie Maker: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/adjusting-audio-in-Windows-Movie-Maker-frequently-asked-questions

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Importing audio files into Windows Movie Maker

  Trying to import music files into a movie in Windows Movie Maker, I get a message saying that the name of file.MP3 music could not be imported, but it does not give me a reason why the audio file cannot be imported. Is there something I can do?

  Hello

  This forum is for your comments and your question should be asked in the answers – Windows Forums for
  your version of Windows.

  Answers - Windows Forums
  http://answers.Microsoft.com/en-us/Windows

  =====================

  My friend John Papa - MVP - is the expert on Windows Movie Maker.

  PapaJohn.org
  http://Papajohn.org/

  PapaJohn - online tutorials
  http://www.Papajohn.org/mm2-online-tutorials.html

  Windows Movie Maker Tutorials - check the sounds of the addition in the left menu and others on the
  main screen.
  http://www.windowsmoviemakers.NET/tutorials/

  Windows Live Movie Maker that works on Vista and Windows 7, see the link under Windows Live Essentials.
  http://windowslivehelp.com/

  I hope this helps.

• This is the message I get when I try to add the audio to Vista windows movie maker that the devil is a codec & where can I find the right one to download?

  The file Morrison\Moondance\05 in the Mystic.m4a of C:\Users\kathy\Music\iTunes\iTunes Music\Van cannot be imported because the codec required to play the file is not installed on your computer. If you have already tried to download and install the codec, close and restart Windows Movie Maker, and then try to re-import the file.

  There is a compatibility issue with the M4A file.
  Convert M4A to WMA and the
  importation should be allowed:

  There are to many converters available on the net...
  the following links are some examples.

  Proceed at your own risk *.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  (1) format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup270.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag FFSetup270.exe out of the folder
  and drop it on your desktop. To install left click.

  (2) Freemake Free Video Converter (freeware)
  http://www.Freemake.com/free_video_converter/
  (Windows XP / Vista / 7)

  (3) Koyotesoft Free Video Converter
  http://www.koyotesoft.com/indexEn.html
  (2000/XP/2003/Vista/Seven)

  (4) Sothink Free Video Converter
  http://www.Sothinkmedia.com/video-converter/
  (Windows XP / Vista / 7)

  (5) SUPER © Simplified Universal Player Encoder & Renderer
  http://www.videohelp.com/tools/Super
  (the download mirror site is faster) (Windows XP / Vista / 7)

  (6) Xilisoft Video Converter
  http://www.Xilisoft.com/video-converter.html
  (not freeware but receives good reviews)

• Audio transfer using Windows Movie Maker

  "Take over the trap on the Strip" Drew Williams from Microsoft uses Windows Moviemaker and commands to set the audio source by clicking on 'Show the Options' to expose the Narration captured timer and menu Audio device. I can't find the link Options view.

  If you use WIndows Live Movie Maker, it doesn't have the option of storytelling.

  If you use Vista Movie Maker 6... try the following link:

  Windows Vista - Narrator Movie Maker - add to your movie
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-narration-to-your-movie

• Audio tracks in Windows Movie Maker

  I imported a video that plays on one side of the speakers... I want to play mono in both speakers. I can run it in Windows Media Player and selecting th configuration SRS WOW I can get to play in both speakers.

  Ultimately, I want to do a clip in movie maker audio plays in both speakers...

  Puzzled
  Sean

  Hello SDruelinger,

  See the link below, there may be a few good troubleshooting steps that you might have missed.

  http://www.computing.NET/answers/Windows-XP/weird-problem/138889.html

  See you soon

• Importing Audio files to Windows Movie Maker

  I'm trying to import 4 different Woindows Movie Maker audio files to play at different times during a slide show.  They are all in MP3 format.  The other return will work an error saying quite simply impossible to import.  Help please!

  Convert MP3 files to WMA format before
  import into Movie Maker should dissipate the problam.

• Removal of audio background in Windows Movie Maker__

  I am trying to remove the background noise in Movie Maker - I use Vista.  Threads say to highlight the clip, click "clip" at the top, down to audio and there will be a mute, discoloration, the volume option - this area is grey outside and non-functional, so it does not work - what should I do, I checked to see if it's the latest version (SP2), no update does seem to be necessary... but I can't use it!  And can't seem to find an answer here, then perhaps that person has had this problem?

  Hello Shelly,

  I want to clarify if you try to delete the audio clips or try to remove static\noise in windows movie maker.

  If you try to remove\adjust audio of the clip, please follow the steps mentioned in the link below

  Audio setting in Windows Movie Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/adjusting-audio-in-Windows-Movie-Maker-frequently-asked-questions

  If the noise is part of the file, he was there when you recorded the video, then there isn't anything you can do to remove it.  That would take the studio type unit to filter only specific frequencies and types of control sounds very high-end.

  Reference

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/654f4bf2-A6FA-4CE6-BDA9-189d684a08c2

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problems with the implementation of the chronology of the railway imported into Windows Movie Maker

  Original title: problems with rails imported into Windows Movie Maker.

  I'm working on a project, and every time I import tracks, I can't place in the timeline because WMM has managed to turn them into securities that are long 9784 hours. I played against them on several different media players and they were all the lengths they are supposed to be, but once they are on WMM, they are totally foires.

  Is there a reason why this is happening and how I can fix this problem?

  Hi PixieNinjaReprise,

  1 have you downloaded the songs from any online store?

  2. is the song that is protected by digital rights management?

  Check the file format and see if this file format is supported by the Director.

  However, you can drag the song at the beginning of the time online click fade at the end of the song.

  You can check the following links for more information:

  How to add music

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-music-to-your-movie

  Audio setting in Windows Movie Maker: frequently asked questions

  questions http://Windows.Microsoft.com/en-US/Windows-Vista/Adjusting-audio-in-Windows-Movie-Maker-Frequently-Asked-

  Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/video-filters-in-Windows-Movie-Maker-frequently-asked-questions

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think. If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows Movie Maker, create empty audio files from Audio CD through Media Player playback.

  I am trying to integrate audio CD in Windows Movie Maker by using the Microphone of CD Audio in Windows Movie Maker game and reading the CD with Media Player file. The file is created very well with the small notes on the icon, but reading, there is no sound. I went into control panel - household and made sure that all the sound elements was not checked in as volume controls 'mute' and turned everything up to full. Playback of the audio in the player, once I hit 'record' in WMM and the operation starts. I hit stop when the desired recording is over... but the files play 'empty' back in WMM and Media Player. This procedure has worked well for me in the past, so it's very frustrating that it has suddenly stopped working.

  I am trying to integrate audio CD in Windows Movie Maker by using the Microphone of CD Audio in Windows Movie Maker game and reading the CD with Media Player file. The file is created very well with the small notes on the icon, but reading, there is no sound. I went into control panel - household and made sure that all the sound elements was not checked in as volume controls 'mute' and turned everything up to full. Playback of the audio in the player, once I hit 'record' in WMM and the operation starts. I hit stop when the desired recording is over... but the files play 'empty' back in WMM and Media Player. This procedure has worked well for me in the past, so it's very frustrating that it has suddenly stopped working.

  =================================
  As the Audio Input Source, try the stereo mix.

  Or... it may be worth trying to RIP the CD with .wma as the
  target format, then import the .wma file into Movie Maker.

  Songs of RIP (copy) of a CD on your computer
  http://www.Microsoft.com/windows/windowsmedia/KnowledgeCenter/HOWTO/MP11/RIP.aspx

  Easy start for Windows Media Player 11 guide
  http://www.Microsoft.com/windows/windowsmedia/KnowledgeCenter/EasyStart/mp11guide.aspx

  Windows Media Player 11 tutorial: how your Audio CD ripper
  http://MP3.about.com/od/WindowsMediaPlayer/SS/WMP_ripcd_tut.htm John Inzer - MS - MVP - digital media experience

• All using windows movie maker, I added audio, but I can't hear the music while playing the video... Why is this?

  All using windows movie maker, I added audio, but I can't hear the music while playing the video... Why is this?

  Hello

  1. What is the format of the video file that you use in Movie Maker?

  2. do you receive error messages when you try to play the video?

  Some audio and video file formats are not supported in Windows Movie Maker and cannot be imported. However, if you have a video or audio file that is not taken care of, you can use a non-Microsoft video editing software to convert the file into a format supported by Windows Movie Maker, and then import the video file or an audio resulting in Windows Movie Maker.

  You can use your favorite search engine and download third-party video editing software to convert the file.

  Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  For more information, you can also consult the following articles:

  Problems with importing files into Windows Movie Maker

  Import video, photos and audio on Windows Movie Maker

  Hope this information is useful.

• Windows Movie Maker-impossible to hear the audio for slideshow

  Windows movie maker-audio trouble__

  Windows movie maker-audio trouble__I published a slideshow on movie maker but I hear the audio. The volume is high enough and the songs I downloaded worked fine in media player. I don't know why they do not work on the slideshow... can someone please help me?

  I published a slideshow on movie maker but I hear no audio. The volume is high enough and the songs I downloaded worked fine in media player. I don't know why they do not work on the slideshow... can someone please help me?

  =================================
  What is the format of the music files? Could be interesting
  trying to convert them to WMA format before
  import into Movie Maker.

  Just because a file is played in Windows Media Player
  does not ensure that it will be compatible with the film
  Maker.

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv or dv - avi
  Music - wma, wav, wmv

  The following free Converter may be worth a try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Koyotesoft "Free MP3 WMA Converter".
  http://www.koyotesoft.com/indexEn.html
  (FWIW if you install the converter, you can
  Uncheck offerings from Yahoo and Dealio) (also... you
  may want to uncheck the CD Ripper and the Easy
  MP3 Cutter)

  After installing the program... open and drag and drop
  your audio files on the main screen...

  Choose a backup folder (path of output). Or just leave...
  "Save to the directory the file" checked and the new
  files will be saved in the folder with the current files.

  Choose a format...

  Left, click Convert.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Windows Movie Maker (version 2.1) does not open my .mswmm project.

  The WMM gives the error message "stopping" whenever I try to open this project.  I have Windows XP.  My project was started about 18 months ago, and I believe that WMM has been automatically updated since then.  I thought that an older project could be opened in a new version of WMM, although a more recent project could not be opened in a previous version.  I'd really like to reopen this project in order to complete and save, because I spent a lot of time to compile.  Would appreciate any help that can be given.  Thank you

  Hi ElisabethLee,

  1. did you of recent changes on the computer?

  2. are you able to create and save a new project using Windows movie maker files?

  3. do you have security software installed on the computer?

  Method 1

  Windows Movie Maker in Windows XP uses video and audio filters when you import, preview and record movies.

  I suggest that you turn off the video and audio filters in Windows movie maker and check if it works.

  To change the video filter settings

  (a) click on the Tools menu, click Options, and then click the compatibility tab.

  (b) in the list of video filters, you can enable or disable a filter by selecting or clearing the check box.

  Change the video filter settings

  http://Windows.Microsoft.com/en-us/Windows-XP/help/MovieMaker/change-video-filter-settings

  Method 2

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• Windows movie maker and xvid codec!

  Hello

  I'm new to WMM, but no more contact.  I use WMM and after that I get the project done, I publish it and lower half is green and the top half is shrivelled.  I would be YouTube and google it and they said to uncheck the Xvid.  Then I go to tools, options, compatibility, then I try to uncheck and I do not have a XVID but I don't have a Divx, so I uncheck that but everything is done my files imported in the section overview of WMM go to a black screen with audio.

  I have another suggestion to go to start - all programs - xvid - (at this point, I downloaded it) but I can't open the program and they wanted me to go deconded converter (or something of the sort).  I'm trying this and divx, but they are not the same at the user level.  I have a product called 3ivx, but once again it is not the same on a user level!

  Suggestions, I just want to do the work!

  Hello

  I'm new to WMM, but no more contact.  I use WMM and after that I get the project done, I publish it and lower half is green and the top half is shrivelled.  I would be YouTube and google it and they said to uncheck the Xvid.  Then I go to tools, options, compatibility, then I try to uncheck and I do not have a XVID but I don't have a Divx, so I uncheck that but everything is done my files imported in the section overview of WMM go to a black screen with audio.

  I have another suggestion to go to start - all programs - xvid - (at this point, I downloaded it) but I can't open the program and they wanted me to go deconded converter (or something of the sort).  I'm trying this and divx, but they are not the same at the user level.  I have a product called 3ivx, but once again it is not the same on a user level!

  Suggestions, I just want to do the work!

  =====================================================
  The info may be what you've already tried... but that's all I do not have the subject.

  =====

  The Green problem bar setting in Windows Movie Maker
  http://www.bernzilla.com/item.php?id=884

  When I tried to follow the directions, I was unable to find XVid on my
  computer.  So I googled XVid and then (I think) the 2nd entrance to
  Download XVid.  After I downloaded it, I could follow the directions
  bernzilla and when I published a video - Voila! no green bar!

  After thick film Green line is published
  http://www.windowsmoviemakers.NET/forums/ShowPost.aspx?PostID=105025

  =====

  Good luck...

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Windows Movie Maker problem

  So I have Windows Movie Maker live on my computer which is a HP2009m computer. When I go to the title of Director of windows and add a video file in it, the video becomes a gray wavy line that is shaded by the bottom half of the video file and don't play it not. I tried to uninstall and reinstall Director windows live 3 times. Help, please! I want to make a video for my friend from the 2nd year of all our submissions. Thanks :)

  See if anything in the links below helps to solve the problem.

  The Green problem bar setting in Windows Movie Maker
  http://www.bernzilla.com/item.php?id=884

  Windows Movie Maker: Frequently asked questions.
  http://Windows.Microsoft.com/en-us/Windows-XP/help/Movie-Maker/FAQ#T1=tab01