Audio synchronization is disabled at the end of the records

Similar Questions

• Audio device is disabled. The audio device I've selected is currently disabled in Windows.

  I can't have my music/dictation for playback in my helmet. The audio device is a generic USB CJF helmet. I ran the diagnostic test of Microsoft on my audio playback and recording. The problem was not fixed, but has been reported as indicated above. "Audio device is disabled. The selected audio device is currently disabled in Windows.

  I need to fix this problem in order to transcribe the digital dictation. Can you please help?

  Joanne

  Hello

  My problem was corrected later. Thanks for all the views...

  Joanne

• Synchronization of photos for the records of several PC iPAD

  Hello

  I have pictures in several files in my PC.

  I would like to synchronize all at once to my iPAD.

  When I opened "Synchronize the Photos" - page in iTunes, it is possible to select only a single folder.

  Is it possible to select several folders?

  Peter

  If the records are directly under the same parent folder then you should be able to select this parent folder at the top of this screen of Photos and records of the child must be indicated below (if you select "Selected folders") for the selection and timing of the iPad for example

  

  If files are located on your computer, then no, you will not be able to select and synchronize them with your iPad - I created a folder separated (with specific subfolders for holidays/events) for the photos that I have synced my iPad

• Audio Studio LE-how adjust the recording settings

  Help to install a SONY USB turntable

  Hi all -

  I just got a SONY USB turntable and hooked up with the software (Audio Studio THE), when I recorded it, I picked up a lot of other noise that has mastered the music from the disc.  How can I set my system so that it captures only the record music and not the environmental music?  Thanks in advance

  Laurent of Norwalk

  Hi Laurent,.
   
  1. have you installed the device USB stereo turntable with success?
   
  There might be some recording settings in the Audio Studio software THE. We recommend that you cross check if all unwanted settings are applied that captures the external sound and change accordingly.
   
  See Install a USB device
   
  See Audio recording in sound recorder: frequently asked questions
  You can also contact the Team Sony
   
  Kind regards
  Syed - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Spent 680 GTX to the 770, now MPE is disabled and the recording will not work in CS6.

  I recently had to return an EVGA GeForce 680 via RMA failure, and as EVGA was more than 680's in stock they sent me a 770 instead.

  I installed the card and reinstalled the latest drivers, and I got this error message when you open a project (CS6):

  "This project has been modified used with Mercury Playback Engine GPU Acceleration (CUDA), which is not available on this system.  Mercury Playback Engine Software only will be used"

  I also get the following error message when you try to encode: "recorder captured No. Frames"

  I have so I uninstalled and reinstalled everything using this sequence:

  -Uninstall the wipes and utilities Matrox

  -Uninstall Adobe CS6

  -Run Abobe vacuum tool

  -NVidia drivers run Setup (ver. 337.88), making sure to check 'Perform Clean Install' (I installed only graphics and HD audio drivers. No 3D Vision, physx and GeForce experience)

  -Install Adobe CS6

  -Update Adobe CS6

  -Install the Matrox utilities

  -Restart the PC and the power of Matrox cycle

  -Install the Matrox models

  The Matrox I use is THE MX02 w/MAX (version 7.6.0.1993)

  Windows 7, Adobe CS6

  After re-installation, I still get the same error messages.

  Can someone please offer assistance so that I can get back to editing?  Thank you!

  The 680 was on the list of "Supported", the 770 apparently not. No worries. It works, they just never specifically tested and they do not want to engage in something that they haven't tested.

  Just delete the file named cuda_supported_cards.txt and the problem will disappear.

  Regarding your Matrox stuff, I have no idea. I'm sorry.

• the answer I received said to disable automatic synchronization, how disable you auto-sync?

  I have:
  disabled auto-start.
  unchecked the box "start synchronization when the device connects.
  I tried all the choices on the sync tab
  I tried all the options in Sync Center.

  What Miss me?
  TYVM

  After wandering in a dozen different forums, I found the apparent answer.
  Portable device enumerator Service seems to be the culprit.

  Follow this step to turn off the service.

  1. click Start and type services.msc in the start search box and press on enter.

  2. scroll through the list and select the service.

  3. right click on the service and choose the Propertiesoption.

  4. you can change the Startup type to disable or the status of the service to stop.

  It worked for me!
  Best wishes!
  Ed

• Windows Movie Maker - releasing only audio, is it possible to publish the exact length of the audio and does not include the lot of silent at the end?

  Windows Movie Maker - have 6 minutes of audio spliced, I would like to publish in the form of an audio clip with no video.  I heard that this is possible, and it all works, the 'framework' includes 6 more minutes of space without air circulation that gets compiled with the planned 6 minutes of audio matching 12 minutes of audio rather than the 6 minutes.  Is it possible to MovieMaker 'See' the end of my audio instend, to include 12 minutes in length with it default?  Should I include photos or video for the project to publish only 6 minutes, instead of the 12 minutes?   I hope this makes sense...

  I assume you are using Vista Movie Maker 6 and not Live Movie Maker?

  It is a problem that I've not seen before... the recorded length must be equal
  at times combined clips on the timeline. I guess it's possible
  If you've done a lot of editing/trimming clips... something was corrupted.

  I was wondering... If you import the .wma file saved in Movie Maker and drag
  it to the timeline... it shows the clip as being the length of 12 minutes? If it isn't...
  Perhaps you could he split and right click Delete unwanted 6 minutes and
  then re-save.

  Divide... drag the playback at the end of the music and the type indicator... CTRL + L
  .. .to split the file then right-click of the unwanted part and click on delete.

  Tip: Unlike clips video... audio clips can be dragged to the timeline, so don't forget
  they are dragged all the way to the left to prevent air from dead at the beginning or
  between the clips.

  It may be worth trying to go to... Tools / Options / compatibility... tab and the left click
  the "All default settings" button before the Save.

  And... If the clips audio source are not the. WMA format... it could be a useful
  try to convert them to WMA before you import into Movie Maker.

• Audio does not pausing at the end of the slide

  Hello world. Captivate 8 using, version 8.0.3.290, 10 Windows.

  Have a problem with the audio in a project where the user progresses to the next slide by using the next button. However, we recorded audio outside Captivate, saved as MP3 and dragged and deposited the corresponding MP3 files in the slides in the film.

  We presented the project preview and audio is not a break at the end of the slide and wait for the next button to be clicked. Instead, he continues to audio for the next slide. How to stop doing this?

  

  

  Thanks in advance for any help you might be able to offer.

  Be sure to leave a small space after and before each audio clip in the slide. This way Captivate will not hold account is a large audio file distributed over several slides.

  Another tip: don't compress to mp4, if you import audio clips to Captivate but keep the original wav files. Captivate will compress to mp3 at the time of publication. Look in the library, you'll probably find that Cp has created a wav from your mp3 file.

• The Zoom H2n sound audio synchronization

  I just bought a Zoom H2n to record audio accompanying the video from my Canon 1 d Mark IV dSLR.  Today was my first attempt to manually synchronize audio H2n to video using Adobe first Pro CS5 of corresponding Canon.

  I recorded a handclap on the DSLR video and audio and at the same time on all channels H2n to serve as my point of synchronization.  My Premiere Pro project is 1080 p, 29.97 FPS.

  The problem I encountered is that the audio H2n is out of sync with the SLR Canon digital audio/video of a framework.  I can only move the Premiere Pro audio tracks that contain the audio H2n in discrete images.  I can't change the audio tracks into a framework, but it is what is required to get a precise synchronization.  The clip of final production will contain the audio H2n and Canon video but not audio of Canon.

  Most people would probably not noticed that the sound is slightly out of sync, if they saw a clip with audio of half frame to the incompatibility of the video, but I'm not happy to leave it like that.

  I am new to this so there is probably an easy fix, but I can't seem to find it.  Can anyone help?  Thank you.  Mardon

  If you change the view of the sequence of frames for Audio devices, you will be able to move the audio clip in much smaller increments.

• Audio is not synchronized with the video...

  Shot a 16 minute video using the iPhone. He shot without breaks. Just take the lead. When I watch the video in Quicktime audio synchronization format is very well throughout the sequence. But when I import video in first Pro CC 2015.3 and play in the timeline, the audio is synchronized at the beginning and starts to drift and at the end of the video, the audio is average not synchronized with the video. Is there something in preferences that must be put? As, I exported the video and it was always out of sync.

  Note: I've imported the same images to FCPX and I had no problem of synchronization.

  First cannot process images with variable framerate (such as phones, webcams etc.)

  Converted with HandBrake contstant framerate and re-import.

• Audio is more synchronized on the timeline or Panel preview of the edition after all was over. Help?

  OK, so I'm changing a package which is about 8 minutes in length. I had almost finished, except for a few small touches here and there. I had decided to examine it again today and here, none of the audio has been synched to the video more. It was yesterday, as far as I know. There can be not just next door. It seems that the audio from the end of the sequence is now forward and the rest is all mixed up too. The film was shot on a Sony 60-minute miniDV cassette and had imported fine. The imported video file is always synchronized when played in Windows Media Player, but as soon as I import in first Pro CS5.5 is as the file that is out of sync. I have other packages on the same timeline of other bands and they play very well. I thought that maybe I had moved the audio tracks separately from the video, but as I said, even in the Panel preview audio is disabled.

  I tried to break the link and recreate a link to images and tried to start over from scratch, I DON'T want to do and just add the same file to the batch and re-edit.

  The file is corrupted? Is - this first Pro CS5.5 which is ruin? What is a user error, which can be easily solved? Do I need to reimport images from the tape to the computer instead of just the file to the PP?

  I'm working on this package for a few weeks now and would not need to restart. If tere is a solution to this, other that to start over, I'd appreciate it greatly help!

  Also, I now look through it, the audio is not only mismatch but also nervous and it cuts in and out from time to time for just a frame or two. This makes me think, possibly, that the file is incorrect...

  Post edited by: mcourtney44

  The film was shot on a Sony 60-minute miniDV cassette and had imported fine.

  At first, you 'capture' of a band and you 'import' digital media files.

  Was this DV images captured of the Ribbon by using first?

  You can try to remove your media Cache files.

  Edit > Preferences > media

  Under "Media Cache database" hit "Clean".

  This will remove the database only.

  Navigate to the location specified as 'Media Cache files',

  Open the folder, just select and delete.

  Media and the Database Cache files will be automatically re - generate

  When you reopen your project... leave enough time to make it end.

  

  You can also try to remove your preview files.

  Project > project settings > disks work

  Navigate to the specified location in the video previews / Audio Previews',

  Open the folder, just select and delete.

  When you re-open your project, first ask you for the location

  the missing preview files... Select 'offline '.

  Return the new preview files if necessary.

  

• Audio synchronization in flash problems

  I is currently experiencing some problems with Flash CS3 audio sync, though I noticed the same problem in Flash 8.
  
  The problem has to do with receives the sound to keep up with the animation. We were all our audio put on a layer in the main timeline and set mode sync 'stream '. If audio is all in a single file that runs continuously throughout the comic strip (i.e., the cartoon lasts 4 minutes and the only audio track lasts 4 minutes), it is about half a second out of sync at the end of the film.
  
  However, when it comes to multiple audio files (for example, in a 4-minute cartoon every line of dialogue is its own individual audio file) the noise becomes considerably out of sync - sometimes an audio file will play 4 or 5 seconds before she is supposed to be in the timeline.
  
  Is there a way to solve these problems, and is there more information on why they occur? The last of them seems more outrageous tto me. 4 or 5 seconds out of sync, sometimes only 10 or 20 seconds in the movie, is quite a bit and is not acceptable. I know that a solution has beeen to keep flash files less than 1000 frames in length, but for my work it is simply not possible.

  The only way I found to solve this problem is to go to your publication
  Parameters and the level of compression set the MP3 to something higher to 16 Kbps. I
  set mine at least 24 kbit/s and it will usually solve the problem of synchronization.

  --
  Adobe Certified Expert
  www.keyframer.com
  www.Mudbubble.com
  -----------------------------------
  (if you want to email me, don't watch)
  -

  "McThrill" wrote in message
  News:g7d9fb$OLC$1@forums. Macromedia.com...
  > I is currently experiencing some problems audio sync with Flash CS3.
  > Although I noticed the same problem in Flash 8.
  >
  > The problem is related to Gets the sound to keep up with the
  > animation. We were all our audio put on a tier dedicated to
  > the
  > main timeline and set mode sync 'stream '. If the audio is all
  > in a
  > file that runs continuously throughout the comic strip (i.e., the cartoon is 4
  (> long minutes and the only audio track is 4 minutes), it's
  > half a
  > second out of sync by the end of the film.
  >
  > However, when it comes to multiple audio files (for example, in a 4)
  > minute
  (> cartoon every line of dialogue is its own individual audio file) the sound
  > becomes considerably out of sync - sometimes an audio file will play 4 or 5
  > seconds before she is supposed to be in the timeline.
  >
  > is there a way to solve these problems, and is there more information on
  > Why
  > they occur? The last of them seems more outrageous tto me. 4 or 5 seconds
  > out
  > sync, sometimes only 10 or 20 seconds in the movie, is quite a bit
  > and not
  > acceptable. I know a solution has beeen to keep flash files
  > under
  > 1000 frames in length, but for my work it is simply not possible.
  >

• How to disable all the selections at once?

  How to disable all the selections at once?

  If you are referring to the playlist, artist, album & kind selection boxes, then I don't think that there is a way to uncheck those all at once.

  If you mean the boxes in the view of songs Ctrl + click and the checkbox to check or uncheck all of the boxes. Note, however, that the use of these boxes is a bad way to manage the synchronization. Uncontrolled songs are ignored in the normal course of track in track or shuffle playback. Better to use one or more playlists to control what is synchronized and have checked most, if not all of your library. Items not controlled in my library are things like interview bonus tracks that had never what to hear accidentally, I keep in my library.

  TT2

• Pavilion p7 - 1446 s: beats audio multi streaming disable

  Recently, the multi-streaming option on the beats audio software in my pc has decided to activate its auto and when I try to hit the button disable it blocks saying that idtngui.exe has stopped working. It's really irritating because I can't use my headset for games with it on or the audio game goes right through the speakers anyway.

  Hi there @ea023,
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that you have some problems with the software audio beats. in Windows, 10. I'm happy to help you.

  As you mention just "enabled itself" it may be a value of tryinf beforethat system restore happened.

  HP computers - using the Microsoft System Restore (Windows, 10, 8)

  Try it and let me know and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• Stop synchronization of windows with the file is no longer available

  How to prevent synchronization of windows trying to sync with a folder that no longer exists? I'm working on a windows XP computer that had a network folder shared on our old domain controller. It was created to "work offline". This former DC has since died, but the XP machine is still trying to synchronize with him whenever he disconnects or connects.

  I tried to delete all the files temporary/offline, I tried windows Explorer and go to tools > Synchronize and then unchecking the file that does not exist. I tried to go to the configuration of the synchronization and UN-checking the folder to synchronize when connected to the LAN. Nothing seems to prevent synchronization attempt. There are also other folders that exist that I want to keep the synchronization with, so I don't want to completely disable synchronization. Does anyone know how to make so that he can stop sync with just this file?

  Hello

  You can try the troubleshooting steps provided in the link below in case you haven't tried them already.

  How to use offline files in Windows XP
  http://support.Microsoft.com/kb/307853

  For more assistance, you can publish the isuse on the link below.

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/