AUSST - update server problem: 406 IIS7 errors and ERROR: Invalid webfeed

Similar Questions

• Version with ControlLogix - link cRIO (implicit messaging), "(Code 16 #0315) problem" connection request error: invalid segment type ""

  I have developed and delivered a system in Germany several years ago.  He worked then.  But the cRIO was damaged and replaced by a newer model, and does not now.  I suspect (and Support technical OR agree) it's a problem of software version, which could be solved with the NOT-MAX Software Installer.  But I do not have access to the system myself, and correspondence is slow and tedious.

  The original system was a cRIO-9073, developed with LabView 2009.  He used the implicit Messaging.  The ID of Instance, sizes, IP addresses, etc everything has worked very well.

  The current system is a cRIO-9074, with LabView DURATION 14.0 (I guess that LV 2014), Scan Engine 4.3, NI - Industrial Communications for Ethernet/IP 14.0.0, etc.  Programs FPGA and processor are responsible and seem to work in the cRIO.  The "EthernetIP Set Assembly Instance Data.vi' will return no error.  But the PLC just pointing out "(Code 16 #0315)" connection request error: invalid segment type "."  We looked at intellectual property (the mistake was different), sizes and body #s.

  The PLC doesn't have to all be modified.

  Anyone know if there is no problem of compatibility with LV-2014 and Ethernet/IP 14.0.0?  Or if there are all the other required packages?

  I am including the NOT-Max reports.

  Hi ZX81

  To help you 2009 application to work with the new cRIO, you must deploy it to the device. You must in order to deploy the cRIO, make sure it has the same versions of software that you used with the old cRIO.

  You can format the cRIO NI MAX and deploy the application of LV, 2009. However, if you do not have access to the cRIO or your client does not have the necessary software, you can deploy the application in another cRIO with software (cRIO same model and same modules as your client) and create a picture of it and send it to your customer so that it can deploy the cRIO even without the software on his computer. The following document explains how to do this.

  Utility of RAD

  WenR

• Update installation problem - cannot install KB2656353 and KB2656370

  Failed to install KB2656353 and KB2656370 after several attempts. ??  Translated into Microsoft's fix - it routine and fixed according to them but still cannot install.

  Hello

  1. you receive an error message or error code?

  2 have what Microsoft Fixit you tried?

  3. is the question not confined with them specific updated?

  4 did you do changes on the computer before the show?

  5. who is the security software installed on the computer?

  Method 1: You can temporarily disable the firewall and the security software on the Windows XP computer and try to install the updates.

  NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: The problem with Microsoft Windows Update is not working

  http://support.Microsoft.com/mats/windows_update/

  Method 3: You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

• Satellite A100 - update BIOS problem with phlashnt.sys and Vista 64

  I downloaded the upgrade of BIOS (file S10V600.exe) for my Toshiba Satellite A100-437 (PSAA8). When I try to launch it I get the answer:
  "Unable to load driver.
  ... \PHLASHNT. SYS
  ...
  This driver has been blocked form load.
  Error code: 1275 "
  (I rolled points instead of less interesting part of this message.

  My system is Vista Business 64 - bit SP1.

  I turned off User Account Control (in fact it the first thing I did after installing Vista ;)).
  And just to be safe, I also tried to right click on the S10V600.exe file and choose "Run as Administrator".
  I was using the admin account.

  Nothing did. Always the same window with the above message appeared.

  Any help would be appreciated!

  Concerning

  Maybe it's because you have installed Vista 64-bit?

  You may need to use XP or Vista 32 bit update of the BIOS.

• Server problem?  Cannot access our rooms to the United Kingdom

  We are unable to access one of our Acrobat Connect Pro rooms to the United Kingdom.  Simply, we get a blue bar hanging saying 'sign in' whatever the location, browser, pc etc etc.  Not even through iPad can access us.  Since at 0850 am hour British.

  Also, we cannot access recorded sessions, but we can get into our dashboard general Adobe Connect.

  Cannot access the content downloaded in our shared content. Once you click on the URL for it, it freezes / or shows no connection.

  Can anyone help?  Trying to contact the Support of Adobe Connect is a hideous job.

  Matt

  PS: It's interesting because I'm writing a presentation I'm doing for the eLearning Show Thursday, which is run by learning UK & Performance Institute.  I wonder what I will eventually talk...

  The server problem has been identified and fixed. The system is stable now. Let us know if you encounter any problem.

  We apologize for the inconvenience.

  Thank you

  Ashwani

  Acrobat Connect Pro Support Team

• Error message on one of my two Windows 7 PC, 64-bit. "The Apple software update server could not be found.  "Check your internet settings and try again.  Can someone advise?

  These last messsage of error on one of my two Windows 7 PC, 64-bit. "The Apple software update server could not be found.  "Check your internet settings and try again.  My second Windows 7 PC Apple Software Update works normally.  The Apple software update version is 2.2.0.150.  Can anyone tell how to fix this?

  I have the same problem and I don't want to lose my content. App Apple Software Update doesn't work

• I hv with updated installation problem and receive error message-_ "WindowsUpdate_00000646" "WindowsUpdate_dt000" __last 3 days, I get the same error __need help... _

  Error message

  "WindowsUpdate_00000646" "WindowsUpdate_dt000"

  Help me

  Once again thank you

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Two updates - for "SQL Server 2005 Service Pack 3 'and 'Power Poin 2007", throwing errors when installing Code FF Code 80070663

  Original title: two updates - for "SQL Server 2005 Service Pack 3 'and 'Power Poin 2007", throwing errors during installation

  For several months, one day each on ' Windows Vista Bussiness "and"MS Office Professional 2007' install.

  Relevant updates are:-

  1 security Update for SQL Server 2005 Service Pack 3 (KB2494113)

  2 update for Microsoft Office PowerPoint 2007 (KB2535818)

  The lifted message when the update is "patch installer has stopped working".

  Finally, the "errors:" are: -.

  Code FF  Windows Update has encountered an unknown error

  Code 80070663  Windows Update has encountered an unknown error

  I tried nmerous solutions suggested on the forums but nothing helped.

  Please suggest what you please!

  Hello

  Have what troubleshooting steps you tried?

  Answer to the above question could help us by providing the best troubleshooting steps.
  However, visit the link below to download and install the update of security for Microsoft Office PowerPoint 2007 (KB2535818) update.
  http://www.Microsoft.com/download/en/details.aspx?ID=24723

• Update Windows problem with the Bits Service and error 0 x 80070057

  The service status: problem with the Bits Service

  Error 0 x 80070057

  Original title: Windows Update problems

  Hi Dexter,

  Can I know the KB # the update fails?

  What is the question pertaining to a specific or all update updates?

  What antivirus software you use on your computer?

  To resolve this problem, see the following article:

  Difficulty errors Windows Update corruption as 0 x 80070002 and 0 x 80070057

  Hope the helps of information. Get back to us with more information to help.

• Update for the application manager has failed. Impossible to reinstall. Cannot use my apps. Get the 43 error message when I try to re - install. Is it possible to fix this problem without a wipe and load?

  Update for the application manager has failed. Impossible to reinstall. Cannot use my apps. Get the 43 error message when I try to re - install. Is it possible to fix this problem without a wipe and load?

  Error 43 https://forums.adobe.com/thread/2070909

• Error offline - we are sorry, but there was a communication error with the server. Please try again and if the problem persists, contact Adobe Techincal Suport...  (INVALID_QUERY: XMLList object)?

  After a number of years of service, my Adobe Premiere CS4 gives me the following error message:

  Error offline - we are sorry, but there was a communication error with the server. Please try again and if the problem persists, contact Adobe Technical Support...  (INVALID_QUERY: XMLList object).

  I use this software on an old Dell desktop computer to two year with many members and drive.  It is a stand-alone application, not connected to a server.

  Anyone have any ideas on how to solve this problem?

  I think it has to do with the central resource is no longer supported.  Everything works OK if you ignore the message?

• Trying to send a scanned document and I get an error of missing file: api-ms-win-crt-string-11-1.0.dll never had a problem before and I've recently updated to the office of 2016 and that's when I got this message.

  Trying to send a scanned document and I get an error of missing file: api-ms-win-crt-string-11-1.0.dll never had a problem before and I've recently updated to the office of 2016 and that's when I got this message.   Anyone know if it's related to Adobe or Outlook?  I am able to send emails on Outlook.

  Thank you

  Hi lorid74531323,

  Latest version of MS office will not work with your Acrobat 9.

  May be a compatibility issue, please check the web browsers and applications of PDFMaker

  Kind regards
  Nicos

• USB not recognized problem, it worked fine before, then update iOS to 6 is out, and when I plugged it in iPad after update, started having error shortly after.

  I conducted an audit of file, the disk check, you click on uninstall the driver in Device Manager and went as far as reinstalling Windows (I sell the laptop) and still have the error! Someone help me please correct.

  It was working fine before, then update iOS to 6 came out, and when I plugged it in iPad after update, started having error shortly after. I tried to install and unistaling software from apple, and as I said, I even reinstalled windows. always error.

  Hello

  Method 1:

  I suggest you to run the fixit from the link.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems

  Method 2:

  Step 1:

  In Device Manager, check whether the USB controller appears as working properly or have a yellow on her exclamation when the device is connected. Look for error codes as well.

  http://Windows.Microsoft.com/en-us/Windows7/open-Device-Manager

  Step 2:

  Check if the device is recognized on another computer.

  Hope this information is useful.

• I updated my computer to windows 7 and now I'm having problems with my dns, I can't always on; the line. tells me having a problem with my dns server

  updated my computer to windows 7 and now can not conect with the dns can not get online always

  Upgrade to Win7 has nothing to do with Windows Update.

  See http://windows.microsoft.com/en-US/Windows7/why-can-t-i-connect-to-the-internet or post in this forum for assistance: http://social.answers.microsoft.com/Forums/en-US/w7network/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• The Apple software update server could not be found. Check your Internet settings and try again.

  Today, I ran Apple Software Update, which offers a v2.1.4 update and installed. Then, she offered a v2.2 update, which I also installed. Check new updates, I received this error message: 'the Apple software update server is not found. Check your Internet settings and try again. »

  My laptop computer that runs Microsoft Windows 7 Home Premium 64-bit.

  I read the other threads on this problem and tried Windows updates and restarting my PC. I had iTunes installed, but uninstalled it months ago. If I had installed iTunes, I would try the method here: Remove and reinstall iTunes and the components of the software for Windows 7 and later versions - Apple Support .

  I don't want Windows 10 and goes through other threads, upgrade to would not necessarily solve this problem.

  Having received no response, I uninstalled all Apple software and then installed QuickTime, which I use occasionally. The Apple software update is back to version 2.1.3.