Auth ID and password database
Hi experts,
I have a question relating to the authentication of database. I am running a c# web application with text boxes password for users to enter their credentials to authenticate to the database.
So I have a connection string in my config file and my code will basically replace entries by the user credentials in the connection string and go ahead to try to open the connection with the connection string.
After the authentication is successful with the database, I recovered my data and closed the connection. (connection is returned to the pool)
Now the question is after the authentication, the next time that the user needs to open the connection again to make stuffs, how should I go to? The user is more necessary to key in password again once the user has already been authenticated and is already marked as being authenticated to the web application.
Y at - it means to store the oracle password to analyze in the connection string every time that the user must have access to the database? Or is there a safe way to store credentials that I can reuse them in the chain of connection without the user to enter again? I have seems to be missing some things here, would appreciate any help. Thank you!!!
If you don't have the requirements beyond simply do not store the credentials, you can simply use the same connection ODP.NET object to open and close, then open again with the same connection object without providing credentials for each subsequent Open() call.
Tags: Database
Similar Questions
-
Drives me crazy, any help greatly appreciated, error code reads as follows: there was a problem connecting to your e-mail server. Your password was rejected. Account: ' pop3.blueyonder.co.uk ', server: ' pop3.blueyonder.co.uk ', Protocol: POP3, server response: '-ERR [AUTH] username and password not accepted.', Port: 110, secure (SSL): no, Server error: 0x800CCC90, error number: 0x800CCC92
You can access the server via webmail? Also check interference antivirus. See www.oehelp.com/OETips.aspx#3 to disable the e-mail analysis, then remove your mail account close OE and then add it back again.
Steve
-
ORA-01017: name of user and password invalid. logon denied in the database of 12 c
Hello
I have created the new user in PDB 12 c and granted \n(Assurez-vous also,
but I coudnt able to connect to this user.
Please suggest me.
The steps that I did.
SQL > alter session set container = TESTPDB1;
Modified session.
SQL > create user test1 identified by welcome;
Created by the user.
SQL > grant connect, resources to test1;
Grant succeeded.
SQL > validation
2;
Validation complete.
SQL > conn test1/welcome.
ERROR:
ORA-01017: name of user and password invalid. connection refused
WARNING: You are more connected to ORACLE.
Concerning
Kumar V
Dear all,
The problem has been solved now.
12 c database, we could not able to connect the local user database of snap-in.
You need to connect users as below,
[oracle@dg admin] $ sqlplus sys/welcome@PDBDEV as sysdba
SQL * more: Production of the 12.1.0.2.0 version Thu Apr 16 12:56:38 2015
Copyright (c) 1982, 2014, Oracle. All rights reserved.
Connected to:
Database Oracle 12 c Enterprise Edition Release 12.1.0.2.0 - 64 bit Production
With the options of partitioning, OLAP, advanced analytics and Real Application Testing
SQL > show con_name;
CON_NAME
------------------------------
PDBDEV
SQL > create user kumar identified by kumar;
Created by the user.
SQL > grant connect, kumar resources;
Grant succeeded.
SQL > commit;
Validation complete.
SQL > conn kumar/kumar;
ERROR:
ORA-01017: name of user and password invalid. connection refused
WARNING: You are more connected to ORACLE.
SQL > conn sys as sysdba
Enter the password:
Connected.
SQL > show con_name;
CON_NAME
------------------------------
CBD$ ROOT
SQL > conn kumar/kumar@PDBDEV
Connected.
SQL > show con_name;
CON_NAME
------------------------------
PDBDEV
SQL > show user;
The USER is 'KUMAR '.
Thanks for the suggestions.
Concerning
Kumar
-
name of user and password from database
Hello
I have a website and I use coldfusion and dreamweaver. My hosting service requires that, in order to access the database, you must define a user name and password in the code. His work online, but in order to make it work on my localhost I have to delete the user name and password from the code. Does need to somehow I can do my localhost access database with the same user name and password to my hosting service requires? It's a pain to have to work on a page and constantly switch between no user name and password for a user defined name and the password in the code.
If your hosting service uses MySQL, very easy to install on your test machine and require the same username and password as on the instance of MySQL hosting. It's like I do.
Walt
B and B photography
-
ORA-01017: name of user and password invalid. connection refused - Database Link
Hi guys,.
Could you help me, I have a problem connecting to a different database using the database link:
* 1. I have added in the database 'customer' DEV2 tnsnanes.ora *.
DEV =
+ (DESCRIPTION = +
+ (ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.100.85)(PORT = 1521)) +.
+ (CONNECT_DATA = +
+ (SID = DEVDB) +.
+)+
+)+
* 2. I tested my connection using tnsping *.
Oracle@dev > tnsping dev
AMT Ping utility for Linux: Version 10.2.0.1.0 - Production on July 10, 2010 14:35:35
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Use settings files:
+/opt/Oracle/product/10.2/Db_1/network/admin/SQLNET.ora+
TNSNAMES adapter used to resolve the alias
Try to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.100.85)(PORT = 1521)) (CONNECT_DATA = (SID = DEVDB)))
OK (0 msec)
Oracle@dev >
* 3. In SQLPLUS of DEV2 I connect to my database using the tnsnames entry *.
SQL > conn devuser/pwd001@dev
Connected.
* 4. I then create a database of link.*
SQL > Create Database Link dev_Link
+ 2 Connect devuser +.
+ 3 identified by pwd001 +.
+ 4 using "DEV"; +
Database link created.
SQL >
* 5. When I try to connect to the database using the database link, I get an error, but I'm sure that the password and user name are ok.*
SQL > select * from global_name@dev_link;
Select * from global_name@dev_link
*+
ERROR on line 1:
ORA-01017: name of user and password invalid. connection refused
ORA-02063: preceding the line of DEV_LINK
SQL >
What could be wrong...?Try to connect to the database via SQLPlus target using the tnsnames.ora entry: sqlplus bob@remote.
If the target db is 11g, then breaking the password may be the matter. Try placiing the password in quotes when you create the database link.
HTH - Mark D Powell.
-
Username and password - control of the database
Hi guys,.
I just installed Oracle 11 g Release 2 on my windows 7 64-bit OS, the installation went correctly. However, when I went to the control of the database, its request enter me username and password well I'm not what he was referring too. I need to create the user name and password if so where can I create it.
Please help me it's urgent
Thank you
DHello
No..
username to console 'em
sys
password that gave you intallation
And connect sysdbaIf you want that the credentials of the host
username
Administrator
password your password for the operating system.Hope this helps
Daniele -
Local database username and password SSH works not
I have a weird problem. I recently install an ASA 5510 and SSH work. To make it easier on my VPN users I decided that I wanted to implement a policy Windows 2008 network for the RADIUS authentication server. Since I added the part of RAY to the aaa authentication, when I use SSH to connect to the ASA, should not be the local user name and the password I installed. However, I can get by using a domain user name and password. This is the SSH and AAA configuration. Am I missing something here? The user name and password in the ASA is not on the domain and it is as if the ASA does not even LOCAL when attempting to authenticate. I want to use the local user name and password if possible. I'm kind new to ASA...
On another note, I have never been able to SSH in on internal interface. I always get an error message "the remote system refused the connection. I can only use the external interface.
Site - ASA # sh run | in ssh
authentication AAA ssh console LOCAL SERVER_RADIUS
SSH 0.0.0.0 0.0.0.0 outdoors
SSH 0.0.0.0 0.0.0.0 inside
SSH timeout 60
SSH version 2
Site - ASA # sh run | in aaa
RADIUS protocol AAA-server SERVER_RADIUS
AAA-server SERVER_RADIUS (inside) host 10.0.0.6
authentication AAA ssh console LOCAL SERVER_RADIUS
Console HTTP authentication of the AAA SERVER_RADIUS LOCAL
Site - ASA #.
If there is no other config that would help I would be more than happy to show them
Thank you!
Hello
Try as
authentication AAA ssh console LOCAL SERVER_RADIUS
because if the RADIUS is available the device does not check local users.
-
XDB user name and password to access the page configuration EPG on a pluggable database APEX
Hello
I have a base shared of the Oracle (12.1.0.2) 12.
I have an APEX PDB 5.0 file. There is no APEX installed on the CDB (root).
Connected to the PDB, the registry says:
Name of the ID Version State
------------ ----------------------------------- ------------ ----------
APEX Oracle Application Express 5.0.0.00.31 VALID
I want to configure the EPG for this PDB.
I did the following (in this order):
(1) race: apex_epg_config.sql
(2) race: exec dbms_xdb.sethttpport (8080) - the firewall is open for this port
(3) race: change the anonymous user account unlock;
(4) run:
Start
() DBMS_NETWORK_ACL_ADMIN.append_host_ace
Home = > ' *',
As = > xs$ ace_type (privilege_list = > xs$ name_list ('connect'),)
principal_name = > "APEX_050000"
principal_type = > xs_acl.ptype_db));
end;
/
I find myself with the APEX-based users:
Account
Status of user name
------------------------- -------------------------
FLOWS_FILES EXPIRED & LOCKED
APEX_050000 EXPIRED & LOCKED
OPEN APEX_REST_PUBLIC_USER
OPEN ORDS_PUBLIC_USER
OPEN APEX_PUBLIC_USER
OPEN APEX_LISTENER
ORDPLUGINS EXPIRED & LOCKED
ORDDATA EXPIRED & LOCKED
ORDSYS EXPIRED & LOCKED
ANONYMOUS HAS EXPIRED
ORDS_METADATA EXPIRED & LOCKED
I used the documentation:
https://docs.Oracle.com/CD/E59726_01/install.50/e39144/EPG.htm#HTMIG386
When I run from the browser:
http:// < IP address of the server >: 8080/apex
I get the messge:
"APEX request a user name and password XDB"
Does someone has encountered this situation in a PDB file?
Thanks in advance for any information.
Thanks and greetings
Hi Patrick,
Laury wrote:
I have a base shared of the Oracle (12.1.0.2) 12.
I have an APEX PDB 5.0 file. There is no APEX installed on the CDB (root).
I want to configure the EPG for this PDB.
I find myself with the APEX-based users:
Account
Status of user name
------------------------- -------------------------
ANONYMOUS HAS EXPIRED
The problem is the ANONYMOUS account has expired.
Reference: Re: XDB username and password
I think that this issue is addressed in your previous thread so: Oracle APEX server requires a user name and password of the server said XDB?
And here's the thread where Jason explained the reasons: Re: installation of the Apex (4.2.2 on 12 c)
Kind regards
Kiran
-
Unable to connect to the database, user and password name invalid
Hello
I am currently using discoverer of oracle 10g (10.1.2.3) and db 11.2.0.1, operating system RHEL 5
Unable to connect to the DB of IAM Viewer
It gives the name of user and password invalid
the most recent activity that I performed was to import from another instance eul (version 5)
I checked with the dbc file permissions
anything else I might have to watch?PL re-post in the forum of discoverer - discoverer
HTH
Srini -
Windows Mail will not sign to the server. I get the pop up window to log on using the user name and password. I type them in and get the error message. I can use webmail and log in without any problem. Exact error message follows:
Account: 'pop.att.yahoo.com', server: 'pop.att.yahoo.com', Protocol: POP3, server response: '-ERR [AUTH] wrong username or password.', Port: 110, secure (SSL): no, Server error: 0x800CCC90, error number: 0x800CCC92
You set antivirus software to analyze mail? See www.oehelp.com/OETips.aspx#3 disable any email scanner. Remove your email account, then close WinMail. Compact and repair the database to fix all the problems (see www.oehelp.com/WMUtil/) and then add your account to e-mail back again. Usually, which solves the problem if you have blocked antivirus interference.
Steve
-
Windows Mail security request my username and password.
original title: WINDOWS MAIL SECURITY REQUEST for USERNAME and PASSWORD for WINDOWSMessage of ERROR IS: 'pop.orangehome.co.uk', server: 'pop.orangehome.co.uk', Protocol: POP3, server response: '-ERR [AUTH] Invalid login/password pair', Port: 110, secure (SSL): no, Server error: 0x800CCC90, error number: 0x800CCC92
Very often, it is due to an intermittent server problem and not a problem with your computer. You should contact the provider of messaging and see there are problems. See also if you can connect via webmail and if it works. If so, then try to set up a second copy of your account and see if it works. Also beware of interference antivirus: see www.oehelp.com/OETips.aspx#3 and it can help to compact and repair the database of WinMail (see www.oehelp.com/WMUTil/)
Steve
-
on this site - https://www.brickbodies.com/Citrix/AccessPlatform/auth/login.aspx
I can't get my computer to bring up my email in outlook express after I entered my username and password on this site - https://www.brickbodies.com/Citrix/AccessPlatform/auth/login.aspx
I have successfully downloaded client software (launch.ica file). I have a XP system. Help!Hi RodneyMcClinton,
· What happens when you try to access outlook express?
· You get the error message?
· Were you able to access emails using outlook express?
· Have you made changes on the computer before this problem?
Follow the steps in the article.
http://support.Microsoft.com/kb/813514
Reply back with the results.
-
Original title: "Windows Security".
I have Vista Home Premium with SP 2. In Windows Mail, logon security keeps popping up asking me to check the user name and password. This happens from time to time for many months and I've always got to work but happened several times today. I can sign in the server through my ISP and get email. In Windows mail, I confirmed that the name of username-password is the same that I connect through the ISP. I can't front/send by email but receive in Windows mail.
Server response: '-ERR [IN USE] account is locked by another session or for maintenance, try again.',
So wait a while and try again later. You can also go to their website and log on there to see if it works.
Also try to compact and repair the database (see www.oehelp.com/WMUtil/)
Steve
-
That makes me MAD! Windows Mail - checking the user name and password &!
It makes me crazy.For the last few days my Windows Mail keeps asking for my username and password and even if they are correct it still doesn't and comes repeatedly asks me for the info again and again. I deleted the account mail twice now and re added it but it still does not work. I can send emails but not receive. I have McAfee but I aiinstalle only this yesterday so that isn't the problem. the error message is:-
Account: 'mail.talktalk.net', server: 'mail.talktalk.net', Protocol: POP3, server response: '-ERR Authentication failed.', Port: 110, secure (SSL): no, Server error: 0x800CCC90, error number: 0x800CCC92Please help I need to retrieve my emails! Thanks, Sarah
McAfee is a huge problem with Windows Mail. See www.oehelp.com/OETips.aspx#3 if you want to use, wait until you get the job of Winmail.
Check if you can connect webmail and that works very well and it's not a problem on the end of the server messaging or because of misspelled powers. Then delete your account in WinMail, compact and repair the database (see www.oehelp.com/WMUtil/) and make sure that you have disabled the e-mail analysis then add your account to mail back again and see if it works.
Steve
-
Why can I not access my windows mail? It keeps asking for username and password
He keeps asking for username and password and will not accept anything of that type I.
If you can, check if you can connect via webmail to determine if your email provider working properly on their end. If you can log in via webmail, then try to remove your e-mail account, close WinMail and compact and repair the database (see www.oehelp.com/WMUtil/) then add your account to e-mail back again.
Steve
Maybe you are looking for
-
Duplicate movies &; the iCloud status question
I have a strange problem. I use the latest version of iTunes on my Mac. The last time I was there (maybe two weeks ago), everything was fine. Today, I opened iTunes to download two movies that I bought it. Here were the things are a little strang
-
Question of updating the BIOS for Qosmio F50 - 10 k
Hiya: + This Bios update adds functionality to your system. ++ (BIOS stands for Basic Input and Output System. This program is stored in a chip memory dead on the motherboard. +"+ When the computer turns on, the BIOS is launched to perform various fu
-
L26500 61i: PROBLEM UPDATE FIRMWARE L26500 61i
I can't update firmware. My latest firmware is 11.0.0.2 and when I try to upgrade to 12.00.00.5 I get this message SP - SP_12_00_00.5_mvl40 - x 86 - opt_B.signed.fmw: there are problems with the firmware file and the firmware update process has faile
-
HP ENVY 15 laptop: hard drive does not
Hi, I have my pc has two drives hard but recently replaced my windows and now I have (C) drive and my HP support assistant always displays two.
-
have a pc connected to the Samsung tv with cable DHMI and VGA cable. Get the logo windows on the TV screen when I select the pc as source 1360x768@60 HZ tv Unable to get pc programs to show. This connection (AVG) worked fine with a monitor. Has shown