authentication local auth-proxy

Similar Questions

• Configuration of AAA to include local auth for Console connections

  Recently, during a maintenance window, that my AAA configurations are not configured to use local authentication if the AAA server is unavailable. Could use a little help in making sure I have the correct configuration. Here is what I set up today:

  AAA new-model
  AAA authentication login default group Ganymede +.
  the AAA authentication enable default group Ganymede +.
  AAA authorization auth-proxy by default group Ganymede +.
  orders accounting AAA 15 by default start-stop Ganymede group.

  RADIUS-server host x.x.x.x
  RADIUS-server timeout 120
  RADIUS-server application made
  radius-server key

  Good... If you want you will need configure a fallback option when you sign in aaa and enable authentication lines. Throw a 'local' keyword on the end of those, and that you will get what you are looking for.

  I'm a little worried that the "console aaa authentication" is not appear in your configuration. It makes me think that he will not survive until the next refill.

  Are you running the latest revision of your version of IOS?

• AnyConnect local auth

  I configured webvpn/AnyConnect on an ASA. This firewall has also IPSec for remote access configured (and work). When I try and connect to the webvpn, I get the following error.

  Unauthorized user to access AnyConnect Client, please contact your administrator

  I think I have good sound because users of IPSec use RADIUS to authenticate and webvpn is also. I want webvpn to use only the local database at the moment. Someone knows how to put webvpn for local auth?

  WEBVPN as uses a group of tunnel for this validation of the user, if it is not expressly defined it will use namely 'DefaultWEBVPNGroup' by default in this section, you must enter DefaultWEBVPNGroup General-attributes tunnel-group mode and enable the LOCAL server as shown below:

  attributes global-tunnel-group DefaultWEBVPNGroup

  LOCAL authentication-server-group

  NOTE: If this webvpn already uses the RADIUS to validate users, you must create another group of tunnel where you set LOCAL authentication and ensure that this group of WEBVPN Tunnel is chosen by the user. This can be done with the group alias or group url on the ASA.

• Ganymede + auth-proxy on acs 5.0 and later support?

  The nas is 2801 with ios 15.1 and acs 5.3.i want to deploy auth-proxy using Ganymede + protocol.but there no work.using RADIUS is ok.

  I want to know Ganymede + auth-proxy on acs 5.0 and later support?

  Thank you!

  GANYMEDE + Auth-Proxy is only supported after ACS 5.3 patch 5. Upgrade your ACS 5.x or use RADIUS for authentication Proxy.

• Authentication Failed: the Proxy to fail

  What's the matter, authentication fails and the message is this:

  Authentication Failed: the Proxy to fail

  Thank you

  Go to network settings > under 'Groups of network devices' click "(non attribué)" "

  Under servers "(Not Assigned) AAA", note the name of the IP address of your machine, which can be confirmed from the DOS command prompt "

  using the command "ipconfig/all".

  Then, return to the Network Configuration > under "Distribution of Proxy table", click on "(default)".

  And make sure you name server entry AAA for your machine is in the column 'Forward To '. If it isn't, then move your entry of the column machines and ensure that all other entry is under "AAA servers. Press 'submit + Restart.

  Finally, try authenticate a client bit against this ACS server.

  Kind regards

  Prem

• ASA auth-proxy Radius and downloadable ACLs

  Hello

  I want to have ACLs that decide what traffic to allow after authorization auth-proxy.

  1. What are the options I have to ASA + ACS?

  2. can I use auth-proxy on SAA with the CSA and download RADIUS and ACLs?

  3. can I use auth-proxy on SAA with the ACS and Ray 01/09/00-cisco-av-pair (will be ASA understeand it?)

  4. can I use auth-proxy on ASA attrbuts auth-proxy ACS and Ganymede (with ACLs)?

  Thanx

  Hello

  Take a look at this guide to see if that helps answer your question. You can use the downloadable ACLs or the cisco av pair, I saw that the cisco-av-pair method works a little better because he has the user name who logged in as part of the acl which facilitates troubleshooting.

  http://www.Cisco.com/en/us/docs/security/ASA/asa84/configuration/guide/access_fwaaa.html#wp1150820

  Thank you

  Tarik Admani

• Add Basic authentication to the Proxy Services in OSB

  Hello
  
  I just need to add basic (browser pop-up with usr and pwd) authentication to a proxy service.
  
  How can I do?
  
  Thank you!!

  For an HTTP service choose the HTTP Transport label, and then select Basic for the authentication property.

• Active Directory users are authenticated web-auth (web-auth has only LOCAL users)

  Hello

  I have a model WLC 4404 with software version 4.2.205.0.
  I have 2 SSID: Wireless and invited
  -Wireless: using [WPA + WPA2] [Auth (802. 1 X)]
  -Guests: use Web-Auth

  In the guests of SSID (WLAN-> Edit > AAA security servers I have not all enable server - option there is NOT and not activated-).

  I do not understand that the request for authentication is attempted ONLY locally to the WLC but not in the ACS (ACS has been configured in security-> RADIUS-> authentication).

  When a user authentication Web Page inserts user and password of SSID wireless (users who need to be authenticated in Active Directory via ACS) it is authenticated.

  I need to change this behavior.

  There are a few options depending on what you are using the code.

  6.0 and higher, there is an option in the WLAN directly, select only LOCAL.

  5.2 below, under Radius authentication servers, uncheck the box for the user of the network.  This check box allows the WLC to use the servers in the world, which means that if it is not precisely defined under the WLAN, it can / will still be used

• OVD Custom Plugin - return invalid authentication to the Proxy Service

  Hi all

  I develop a plugin for OVD. My goal is to call a Service Proxy by using the credentials of a user in TPM. However, in this plugin, I'm calling a Web service and the authentication result depends on the result of this Webservice. For example, if the WS returns 'false', this means that I should not be allowed to authenticate.

  How can I find an invalid authentication at the request of Service of Proxy, using my plugin implementation?

  Thank you very much.

  You can use the bind method:

  BasePlugin (reference APIs Java Oracle Virtual Directory)

  and set it as the

  ' Public Sub bind (String, String, credentials creds, dn DirectoryString,

  BinarySyntax password, Boolean result) throws DirectoryException.

  {ChainException}

  try {}

  Boolean auth is xyz. Auth (uidValue, pwdValue);

  bool.setValue (auth);

  } catch (Exception e) {}

  Logger.info ("exception:" + e.getMessage (), e);

  bool.setValue (false);

  Customization of Oracle Virtual Directory - 11g Release 1 (11.1.1)

  ~ J

• Authentication problem of proxy server for the domain while accessing internet users?

  We have a problem in my company with the proxy server.

  We have an Isa proxy server to restrict some users who access the internet

  allow us some users and sites for them to access

  but some times it requires authentication for all users who have access also. At that time they keep calling us. so I created a temporary rule to allow all traffic for all users. After awhile, we disable and it is working... but in some cases allow same temp rule also does not work so we say - join the domain and join the domain again...

  It seems that these are all temporary, full-time for us of how, it became

  Is there a permanent solution to this problem...

  Please help us solve this problem

  Thank you and best regards,

  Hi jagdeeshk,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows Server forum.

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

• AAA Ganymede + with backup local auth

  Hello

  I try to get my switches/routers/etc to aaa allows you to restrict access to the configuration of the devices on my network. I have the aaa authentication to GBA v3.3 now, but for some reason any my local user no longer works. I would like to have the possibility of a connection to access local, just in case my ACS becomes unavailable.

  My config on a 2950 is...

  version 12.1

  Service nagle

  no service button

  tcp KeepAlive-component snap-in service

  a tcp-KeepAlive-quick service

  horodateurs service debug uptime

  Log service timestamps uptime

  encryption password service

  !

  AAA new-model

  connection authentication AAA SMOC-access group Ganymede + local select none

  AAA authorization exec SMOC-access group Ganymede + local

  AAA SMOC-access authorization network group Ganymede + local

  AAA accounting exec SMOC-access arrhythmic group Ganymede +.

  AAA accounting network SMOC-access group arrhythmic Ganymede +.

  Select the secret xxx

  activate the password xxx

  !

  username admin privilege 15 secret xxx

  RADIUS-server host 172.20.2.25 key xxx

  RADIUS-server key xxx

  radius-server administration

  line vty 0 4

  exec-timeout 15 0

  password xxx

  exec SMOC-access permission

  exec accounting SMOC-access

  Synchronous recording

  SMOC-access connection authentication

  length 48

  line vty 5 15

  password xxx

  !

  The only time wherever the local user will work is when your RADIUS server is not available. You can test by putting in the wrong key of Ganymede and establishing a new seeiosn. Be sure to keep the original session open just in case :-)

  HTH and rate please.

• Outwardly the user login is authenticated as user Proxy

  Hi Experts,
  
  I created an externally authenticated user in the database. And can connect without a password with the syntax below.
  
  SQL > connect / @TESTDB
  Connected.
  SQL > show user;
  The USER is 'SCOTT '.
  
  That user scott has a power of attorney to an another DBuser PROXY_USER authorization. Previously, I used the syntax to connect to help below.
  
  connect scott[proxy_user]/password_for_scott@TESTDB
  
  So now, what syntax should be used for this user "Externally authenticate" log on as a user of proxy?
  
  Thank you.

  Hello

  Check this link http://www.adp-gmbh.ch/ora/sqlplus/connect.html
  & sub link http://www.adp-gmbh.ch/ora/admin/proxy_users.html

  Thank you

• EAP-FAST and the MAC with WPA2 on RADIUS authentication Local for 1242AG access point

  Hello

  Does anyone has a Setup for this combination work?

  Concerning

  VP

  Hi EAP - FAST didn't need any cert... We must generate CAP... Here is the link... that gives the comparison between different EAP

  http://ciscosystems.com/en/us/prod/collateral/wireless/ps5679/ps5861/prod_qas09186a00802030dc_ps4555_Products_Q_and_A_Item.html

  Here is the link to generate or use the CAP

  http://www.Cisco.com/en/us/docs/wireless/access_point/12.3_8_JA/configuration/guide/s38local.html#wp1050270

  Let me know if that helps...

  Concerning

  Surendra

• WLC Flex connect local authentication does not work

  Hi guys,.

  I'll give you a brief description of our current flexconnect configuration. We have APs configured mode flexconnect in the remote office and in local mode in the local office. Wireless LANs are the same in both locations and we have detected a problem in one specific SSID. It is a voice SSID and configured in 802.1 x mode that authenticates to a RADIUS server in the remote desktop.

  We detected only when the WAN line gets collapsed the IP phones unplugged wireless SSID and when the WAN line become free, reconnected.

  We have seen that we can configure Flexconnect local auth mode to avoid this problem, but it of esn can't work properly. We have set up APs in remote site with an IP address static and configured as NAS in the RADIUS server, but we did not see any which authenticayion in th RADIUS server package when change us the SSID to «FlexConnect auth» local

  Can you give me an idea to help solve this problem?

  Thanks in advance.

  Joel

  I suppose that clients connected by access points Flexconnect have problems where the WAN connection is down (?)

  It depends on your current configuration and security policy what are the feasible options in this scenario. If there is an available RADIUS server - who can still authenticate your users while the WAN line is down, you can configure your access points to access this server directly. You must use a FlexConnect for this group and configure the external server on the general tab, in the menu "AAA". You already made the point of access-static IP addresses and add them as clients on the RADIUS server, then it should work.

  Another option is that in the event of failure, access points to will authenticate the client based on a local data base and/or certificate. Also, this requires a FlexConnect group and the option 'Enable local authentication AP'. For example: If you are using PEAP and a specific user for VoWLAN account you can download the server and the certificates of CA to the WLC and add the credentials of this account to build the same configuration with the external server. Downside of this is the lack of central logging that may not match your security policy.

  Remember that the access point itself can't remember the relationship between the access point and FlexConnect group, in both scenarios, you need to configure all controllers manually with these MAC to the Group mappings. This behavior is different in comparison with the "groups of AP" what access point you remember during the passage of the controllers.

  The "FlexConnect local authentication" option on the SSID itself forces always use local authentication that has been configured on the FlexConnect group even if the connection with the WLC is available. I don't think that it is feasible to use it in your scenario.

  Please rate helpful messages... :-)

• local web authentication fails

  Hello experts!

  I have problems performing clients to authenticate locally on a controller 2106 with ios v.4.1.171.0.

  do I need a radius server must be able to get local auth.

  also the auth login page does not automatically appear when I open a browser and type www.cisco.com or any other url.

  I have to type in vip 1.1.1.1 to be able to set up the connection on the page.

  This is how it is supposed to be for this particular code.

  Thanks for any input... really appreciate it.

  It seems that you have a configuration problem on the wlc. If you can access the web before enabling webauth then you should have no problem getting web page... unless you have a proxy? If you enter 1.1.1.1 and get the webauth page, then it looks that dns does not work or perhaps your home page is a secure https page. Try google.com or something like that.