local web authentication fails

Similar Questions

• WLC (foreign-anchor), problem with external web authentication-> ISE

  Hello guys

  I am designing a platform for a network of comments, which must be isolated from the LAN, the following facilities:

  • ISE 1.2 (SNS-3415-K9 Cisco)
  • WLC 7.0.230.0 (Cisco 5508 controller)---> foreign wlc
  • WLC 7.0.230.0 (Cisco 5508 controller)---> wlc anchor.

  The PAES tunnel between wlc is successfully completed.

  The wireless client gets the IP address of the anchor wlc (DHCP server).

  Test 1:

  I have set up the ANCHOR WLC with local web authentication (internal), the wireless client is authenticated by WLC and successfully navigate.

  Test 2:

  Configure the authentication web external anchor (ISE) WLC. Configure a user to the portal comments ISE.

  The wireless client gets the IP address of the anchor wlc (DHCP server), attempting to engage not display comments portal.

  Debugging a wireless client, try to connect to the guest network is attached.

  That's right... they have a version of code required minimum supported for this.

  Thank you

  Scott

  Help others using the system of rating and marking answers questions like "answered."

• SafeNet Web App using stored on Rainbow iKey 2032 PKI authentication fails

  ESX 5.1

  5.2 horizon view

  Client OS is Stratodesk NoTouch Ubuntu Linux

  Connected to the virtual desktop using PCoIP using Linux Horizon View Client 2.3.0 with USB redirection

  Virtual desktop is Windows 7 Enterprise 64-bit with SafeNet 8.0 SP2 (8.0.186.0) Client authentication and Rainbow iKey 2032 64-bit version of the driver 1.21.0.5

  The key turns in the windows device manager and SafeNet client can read the info/certificate on the key, but when you use Internet Explorer to visit a Web site that requires authentication PKI, you are prompted to choose the certificate from the key but you're not invited to the spindle and site authentication fails.

  Anyone have any ideas on how to get this working?

  After the announcement, I had the idea to try the 64-bit version of Internet Explorer, and that's the ticket!

• Web authentication Catalyst 2960

  Hello

  I am trying to configure Web authentication relief on a catalyst 2960 switch. The goal is to authenticate customers via web authentication that are consistent (the part of 802. 1 x works fine) not 802. 1 x and allow them access to the network. The problem is that the web authentication seems to fail.

  The equipment about my question: switch catalyst 2960 (version: 122 - 37.SE) and a FreeRadius.

  Here's what happens:

  The authentication window will appear in my browser and the access request is sent to the RADIUS.

  The term RADIUS replies with an Access-Accept. Debugging running on the switch show that all this information is coming properly authentication and switch outputs debug a 'status = PASS' and permission to debug outputs a 'status = PASS_ADD'. Despite this the browser on the client generates a message "authentication failure".

  I have read the manual and the Cisco attribute value pairs are mentioned: ' priv-lvl = 15' and «proxyacl...»» ». They are required to make it work? Given that I'm not setting up any authentication switch connection via RADIUS.

  Any suggestions?

  Thanks in advance

  Yes, they are mandatory.

  If priv-lvl = 15 is not returned to the switch, the user will see? Authentication failed? and the access list will not apply. If the source in the statements of proxyacl field is not? everything? or there are other errors of syntax, the user will see? Successful authentication? but the access list will not apply and the user will be denied access to the network.

  Not sure about the configuration of specific FreeRADIUS, but you need to set up the? [026\009\001] Cisco av pair VSA. It should look like:

  Priv-lvl = 15

  proxyacl #10 = ip permit a whole

  Let me know if this lets you squared

• Authentication failed-2008 NPS of VPN from Cisco IOS

  I'm trying to authenticate VPN connections to a Windows 2008 Server NPS Radius server.

  Local authentication works very well.

  This is the cisco configs:

  AAA new-model
  AAA authentication login default local
  AAA authentication login VPNauth local radius group
  local AAA VPNgroup authorization network
  AAA - the id of the joint session

  radius of the IP source-interface Loopback0
  RADIUS-server host x.x.x.x auth-port 1645 acct-port 1646 button 7 xxxx

  list of authentication of card crypto VPNMAP customer VPNauth
  card crypto VPNMAP VPNgroup isakmp authorization list
  crypto card for the VPNMAP client configuration address respond
  map VPNMAP 10-isakmp ipsec crypto dynamic dynmap
  ...

  ... other cryptographic controls

  This is the section of the NPS logs:

  Information about authentication:
  Connection request policy name: VPN
  The network policy name: -.
  Authentication provider: Windows
  Authentication server: x.x.x.x
  Authentication type: PAP
  EAP type: -.
  Identifier for account: -.
  Results of logging: Accounting Information was written in the local log file.
  Reason code: 16
  Reason: Authentication failed due to incompatibility of user credentials. The provided username is not mapped to an existing user account or the password is incorrect.

  I have PAP enabled on network connection request policies /...

  I'm stuck

  Help, please

  You can run a "nipple aaa"command to see if the user can be authenticated successfully?"

  I think this might be a configuration problem on the NPS server. You can google it. Here is one that I have found, refer to the position of "irishHam".

  http://social.technet.Microsoft.com/forums/en-us/winserverNIS/thread/bfbbbae4-A280-4b3f-B214-02867b7d33e3

• Need to implement the alternative login if Kerberos authentication fails.

  Need to implement the alternative login if Kerberos authentication fails.

  In our case, we are sure that Kerberos will fail because we allow agencies 'B' to access this application of reliable source.

  Kerberos fails and the application should display the name of user and password page and then authenticate.

  In the web.xml file changed auth method basic with Kerberos, set up successfully.

  'A' agency users can make successful Kerberos SSO. But when an agency "B" SSO access will fail with 401 and the application appears pop base with the name of user and password fields.

  When the user provides the details and present application returns 401 again. not able to go beyond these steps.

  Please provide your inputs.

  can you please enable security ATN debug and share the newspapers?

  Who will be telll us why the authentication will fail.

  Replace the CLIENT-CERT, BASIC authentication method in the web.xml and try.

  What is the default authenticator control indicator? I think that its just / optional.

  -Faisal

• OSB: [Security: 090302] authentication failed: user... Jim

  Hi all
  
  I'm trying to set up my OSB so I can protect a Web service by using certificates.
  
  The problem is that when I add the security policies at the service of my proxy, I get the following error when you test the service proxy (although the sbconsole):
  
  Impossible to derive the token.javax.security.auth.login.FailedLoginException topic: [Security: 090304] authentication failed: user - Cert Test javax.security.auth.login.FailedLoginException company: [Security: 090302] authentication failed: user - Cert denied test company
  
  I used a few other posts in this forum to implement my wls and osb. For example How to call the service https OSB and how the CERT CN to the principal of ejb SessionContext?
  
  This means that I put the keys, ssl, defaultAuthenticator, defaultIdentityAsserter, enabled X.509 file, set suppliers etc.
  
  My key file contains 2 sets of key public and private keys and therefore should also be ok.
  
  Has anyone else had the same error after configuring their servers of wls and osb?
  
  Thank you
  
  William

  You have configured the default user name Mapper in the affirmation of identity by default to use the certificate CN as the mapped user, [Company - Cert Test is the CN name in the certificate] you will also need to create a user weblogic with the same name as the attribute certificate mapped... Check if you have done the steps as shown here:
  Re: How the proxy service can get the client certificate in Oracle Service Bus

• How to display custom error message when JAAS authentication fails

  Hi all
  I use JDEV 11 g TP4 and have the following problem:
  
  I have a web application with custom, connection module that is called by the container.
  
  When authentication fails, I take a "javax.security.auth.login.FailedLoginException" with the error in detail inside.
  
  The point is, how to display the exact error on login error page, who transmits container automatically
  
  
  Kind regards
  Krasimir

  We have implemented several custom, but never used connection modules JAZNContextCallback. I think it's depracticed JPS... and pay attention to the point made by Frank that this should be changed to WLS in JDev version coming soon. Even in TP4 there has many parts unfinished of JPS where JAZN is always used but does not not as expected.

  I suggest you only use reminder managers JAAS standard or implementation you container own login module standards in order to support any migration. Unfortunately, the javax.security.auth does not provide reminder to catch the request context.

  You can try to use the new oracle.security.jps.callback.HttpRequestCallback)

  I think it should work even with WLS.

  Kind regards

  PaKo

• MAc OS 10.8.3 proxy authentication failed

  I use firefox 21.0 in Mac os 10.8.3.We use the proxy server for the navigation. While browsing the internet firefox invites proxy username and password, after entering the user name and password it shows the proxy authentication failed, a new series of required authentication. The same username and pssword in works well in safari in the same book of mac.

  Help, please

  Dear Dawid,

  Thanks for your valuable response.

  Thank you very much

• Satellite A100-496: WLan authentication failed because of incorrect password

  Friends,

  I use Intel PROSet Wireless user interface to connect to my wireless router.
  Because of this process, I have disabled my windows for wireless control configuration.

  However, despite the use of the property of device correct password and the password, I am unable to connect to my WiFi router.

  I get an error stating
  * "Authentication failed because of incorrect security password." *

  I use the same password key to connect wirelessly through my other laptops, and they work fine...

  I can't find the reason for this failure of authentication...
  All the world is facing a similar problem?

  Is there a way I can allow windows to control my authtication rather than Intel PRO Wireless...

  Please guide me...

  Kind regards
  Dhiraj Shetty

  Hello

  Again activate the Windows configuration and use Windows WLAN options to configure WLAN connectivity. To be honest, using Intel PROSet, this should work too.
  Try to remove the protection of password on your router for a moment and test the connectivity. To be honest, I'm sure that there is something wrong with the settings of your laptop.

  By the way: what operating system do you use?

• PPP CHAP counterpart x 3000-authentication failed

  Hello

  I just bought Linksys x 3000 a few days for my DSL to Jakarta.

  After that I configured my 3000 x, the internet connection could not go up if the PVC connection is in place.

  Here is some information of the device:

  Router information
  Firmware version: v1.0.01 build 2 November 00 22,2011
  Checking the firmware: 914eee0ceca371b4a4231c2af2f9f47f
  Current time: not available
  MAC address: 98:fc:11:dd:0e:cd
  Name of the router: linksys
  Host name:
  Domain name: telkom.net

  Internet connection
  Type of connection: RFC 2516 PPPoE
  Online status: offline
  Internet IP address: 0.0.0.0
  Subnet mask: 0.0.0.0
  Default gateway: 0.0.0.0
  DNS 1: 0.0.0.0
  DNS 2: 0.0.0.0
  DNS 3: 0.0.0.0
  MTU: 0

  DSL connection:
  Status: to the top
  Download speed: 1215 Kbps
  Upstream speed: 442 Kbps

  Connection of PVC
  Encapsulation: RFC 2516 PPPoE
  Multiplexing: LLC
  Type of QoS: UBR
  PCR:
  SCR:
  Automatic detection: disable
  VPI: 0
  VCI: 35
  Activated: Yes
  PVC status: to the top

  And here's what I got in the system log:

  PPP pilot generic version 2.4.2 79
  Deflate Compression of PPP module part 88
  PPP BSD Compression module part 84
  PPPoL2TP kernel driver, 75 V1.0
  ccp_autowan_sm_thread => starts in unconfigured mode, detection of State! 125
  -> State disconnected! 78
  xDSL G.994 training 74
  -> detection of State! 75
  -> dslWanSt = 1, ethWanSt = 0 81
  -> Training RJ11 condition! 79
  ADSL G.992 started 73
  Analysis of channel ADSL G.992 82
  ADSL G.992 82 message exchange
  Link up, carrier 0 ADSL, = us 442, ds = 1215 94
  -> RJ11 State! 70
  PPP-online Start connect... 78
  PPPoE PADI sending. 69
  PPPoE received PADO. 70
  PPPoE sending PADR. 69
  PPPoE server detected. 72
  PPPoE received PADS, session PPP set up. 95
  PPP sends ConfReq id = 0 x 1 [0xb65fbae2 magic] 91
  PPP receive ConfAck id = 0 x 1 [0xb65fbae2 magic] 94
  PPP receive ConfReq id = 0 x 2 [mru] 1492 [auth chap, MD5] [0xc118f417 magic] 121
  PPP sends ConfAck id = 0 x 2 [mru] 1492 [auth chap, MD5] [0xc118f417 magic] 118
  PPP LCP UPWARD. 61
  PPP receive challenge id = 0 x 1, <2x2x2x2x2x2x2x2x2x2x2x2x2x2x2x2x>, name = 127 Huawei
  PPP receive failure id = 0 1 76 x
  PPP CHAP 84 peer authentication failed
  PPP LCP DOWN. 63
  PPP sends TermReq id = 0 x 2 could not authenticate ourselves Exchange 113
  PPP (LCP) send reason Terminate-Request Failed to authenticate ourselves pair. 131
  PPP User name and password authentication failed. 98
  PPP receive id = 0 3 75 x TermReq
  PPP sends TermAck id = 0 3 72 x
  PPP sends TermReq id = 0 x 3 could not authenticate ourselves Exchange 113
  PPP (LCP) send Terminate-Request reason FM timeout. 101
  PPPoE sent PADT. 69
  PPP-online Start connect... 78
  PPPoE PADI sending. 69
  PPPoE received PADT, meeting took end. 94
  PPPoE received PADO. 70
  PPPoE sending PADR. 69
  PPPoE server detected. 72
  PPPoE received PADS, session PPP set up. 95
  PPP sends ConfReq id = 0 x 4 [0xc890720f magic] 91
  PPP receive ConfAck id = 0 x 4 [0xc890720f magic] 94
  PPP receive ConfReq id = 0 x 2 [mru] 1492 [auth chap, MD5] [0xb4a2146c magic] 121
  PPP sends ConfAck id = 0 x 2 [mru] 1492 [auth chap, MD5] [0xb4a2146c magic] 118
  PPP LCP UPWARD. 61
  PPP receive challenge id = 0 x 1, <2x2x2x2x2x2x2x2x2x2x2x2x2x2x2x2x>, name = 127 Huawei
  PPP receive failure id = 0 1 76 x
  PPP CHAP 84 peer authentication failed
  PPP LCP DOWN. 63
  PPP sends TermReq id = 0 x 5 failed to authenticate ourselves Exchange 113
  PPP (LCP) send reason Terminate-Request Failed to authenticate ourselves pair. 131
  PPP User name and password authentication failed. 98
  PPP receive id = 0 3 75 x TermReq
  PPP sends TermAck id = 0 3 72 x
  PPP sends TermReq id = 0 x 6 failed to authenticate ourselves Exchange 113
  PPP (LCP) send Terminate-Request reason FM timeout. 101

  Does anyone have the same experience?

  Please advice.

  Thank you.

  Oh, I'm sorry, I just found out that I put the wrong password PPPoE. After you type the correct password, it works now. Thank God...

• What does "wireless authentication failed because of a time-out" mean?

  Have a combo unit router and modem.  Having two computers.  You can use the wireless that the other cannot use Wired.  Getting messages like "wireless authentication failed because of a time-out," conflict of IP address and canceled due to the delay.  There was a variety of messages.  We had been able to use a router before, but it would be turned off every two hours or more.  Giving the same messages on Windows Vista.  The other computer is Windows XP Motorola
  modem/router.

  Hello

  1. what security WEP, WPA, etc. Do you use?
  2. is the driver software updated for the router to work correctly on Vista computer?

  I suggest you to follow these steps and check if that helps:

  Method 1:
  I suggest you to check if you can connect by using a different port or a different router in case the problem is with the router itself.

  Method 2:
  You can also visit the link provided below, which offers a similar problem resolution. Check if the steps to help you resolve the problem.
  http://social.answers.Microsoft.com/forums/en-us/vistanetworking/thread/4db4caa0-86bb-4b7b-8aa7-252d5653f063

  It will be useful.

• wireless authentication failed because of timeout on new router

  Wi Fi nightmare!

  We bought a new router as we couldn't find MSI we bought the ASUS!

  ASUS WL-520GC router =>

  Wireless authentication failed because the timeout. Layer 2 security key exchange did not generate multicast keys before timeout. I have a Windows vista with the latest Service Pack installed on an Aspire 7520-5115. What I'm doing wrong (I'm a semi ILLITERATE computer!)?

  We bought a new router as we couldn't find MSI we bought the ASUS!

  ASUS WL-520GC router =>

  Wireless authentication failed because the timeout. Layer 2 security key exchange did not generate multicast keys before timeout. I have a Windows vista with the latest Service Pack installed on an Aspire 7520-5115. What I'm doing wrong (I'm a semi ILLITERATE computer!)?

  Help you contact your ISP or ASUS. This isn't a problem of Microsoft.

• 0x8000CCCDF error AUTHENTICATION FAILED when sending or receiving gmail via Windows Live Mail

  How to fix error 0x8000CCCDF

  When I open Windows Live mail, I get... Can't send or receive messages for the Gmail accoune (mymail). (1) account

  Download header for the 'BBY' folder did not complete. The operation was cancelled by the user. (for now, I have no "BBY" in Favorites or elsewhere)

  {The server response: AUTHENTICATION FAILED} ivalid certificate {break}

  Server: 'imap'. gmail.com

  WindowsLiveMail ID: 0x8000CCCDF

  Protocol: IMAP

  Port: 993

  Secure: (SSL) Yes

  I also get a pane open asking me to confirn login, and when I get the pw and email, the response "not recognized".

  I have already created a new restore point and the problem persists. Please notify.

  Vista-IE8 32

  Thank you

  PS, am aware of this site being offline may 20, 2011, I've waited this long, a few days will be okay... I don't have a job in any case. : ()

  Hi place Diago,.

  The question posted here, it fits better the following forum

  http://windowslivehelp.com/product.aspx?ProductID=15

• Authentication failed because the third remote has closed the transport stream

  I am trying to download a zip since an external public server example: https://xyz.com/abc.zip using the webclient.downloadfile () method in an application console, but I end up getting the error below

  "The underlying connection was closed: an unexpected error occurred on a send" and

  "Authentication failed because the third remote has closed the transport stream.

  I tried several solution, but nothing helped. I have no control over the external server. When I manually navigate the link on my browser, I get that download the file, namely the external server is fine and the problem is downloading from the code.

  I tried to put

  System.Net.ServicePointManager.SecurityProtocol = System.Net.SecurityProtocolType.Tls | System.Net.SecurityProtocolType.Ssl3; but it does not work.

  Please suggest

  Hi Anil,

  Thanks for posting your query in Microsoft Community.

  Your question is beyond the scope of what is generally answered in this forum of consumer and would be better suited for the IT Pro TechNet public.

  Please post your question in the TechNet Forums.