Authentication of VPN 3000 Client does not

Get the following error trying to authenticate on VPN 3020: Xauth required but winning proposal does not support xauth, of audit priorities of the xauth list proposal ike ike proposals

Not really sure what it means.

Find the proposals on the VPN3020 IKE (location varies depending on the version, so I can't tell you where). You will find some are active, others do not. Make sure that one is active when the authentication method is "pre-shared keys (xuauth)" with something like MD5, 3DES, DH group2.

If you see a proposal named "CiscoVPNClient-3DES-MD5" that will do the trick.

Tags: Cisco Security

Similar Questions

Dynamic CRM2011 for the outlook client does not recognize that I have already installed SP2

Dynamic CRM2011 for server (vista 64-bit) or the outlook client does not recognize that I have already installed SP2

Error log (edited to highlight what appears to be the problem):

Latest Version of the OS: 6.0.6001

11:14:06 | Info | Service Pack: Service Pack 1

11:14:06 | Info | System type: workstation

11:14:06 | Info | Mask away: 0 x 0300

11:14:06 | Error | Failed to install Microsoft Dynamics CRM for Outlook. Install Windows Vista Service Pack 2 and then try again.

11:14:06 | Error | System requirements not filled to allow the installer to run.

My computer works SP2 and all current updates except for:
- Platform Update for Windows Vista x 64-based Systems (KB971644)
1. error: 8000ffff
I ran 'fit' the Microsoft tool, but made no difference. This update is my problem, or I am barking the wrong tree?

Help, please!
Hi Paul,.

The question you posted would be better suited in the Forums of Microsoft Dynamics. I would recommend posting your query in the Forums of Microsoft Dynamics.

http://social.Microsoft.com/forums/en-us/category/Dynamics

vSphere Client does not connect

Since today the vSphere client does not connect to one of our 3 esxi servers
all have the same error:
No connection available
VSphere Client konnte keine connection "10.2.180.5" zu der recovering.
Ein unbekannter Verbindungsfehler aufgetreten ist. (Fehlgeschlagen Anforderung ist, zu der Die da Remoteserver Hat lange nicht atmosphere.) (As procedure passed timeout))
Translation:
no connection
The vSphere client unable to connect to...
A unknown connection error has occurred... timeout because the remote server has not responded
Ping as 10.2.180.5 ausgeführt wird mit 32 bytes of data:
Antwort von 10.2.180.5: bytes = 32 time < 1 ms TTL = 64
Antwort von 10.2.180.5: bytes = 32 time < 1 ms TTL = 64
Antwort von 10.2.180.5: bytes = 32 time < 1 ms TTL = 64
Antwort von 10.2.180.5: bytes = 32 time < 1 ms TTL = 64
as you can see the ip address is local and the customer to the web UI works no problem but I like to use the vShpere client
I have no idea why its not connecting
same problem for 2 esxi in internet... from my PC at home I can connect without problems
all ideas are welcome im really out of ideas
some info:
Win7 64 bit
ESET AntiVirus 6 Endoint
no firewall (windows firewall disabled)

Fixed: changed to Google DNS (8.8.8.8) in-house DC DNS and everything works... really strange because I use IP to connect

I have problems with the form widget. When I created my forms, I need to leave out the line, one email because my client does not want the message line and two because those who have tried to fill the online form cannot submit because that box "email".

I have problems with the form widget. When I created my forms, I need to leave out the line, one email because my client does not want the message line and two because those who have tried to fill the online form cannot submit because the 'email' box keep rejecting their email address valid. And I just tried to remove the line in my form and it does not allow me to delete or to mark it as not necessary either.

Currently, there is no way around the field email forms of the Muse. Another option is to have a look at Jotforms or another third-party provider of shape that Muse has widgets for.

vSphere client does not display does not import an option of the machine when it is connected to vCenter

Hello
I just got a new PC and installed all my applications, but the vSphere client does not show the import, an option of the machine when it is connected to vCenter, ideas, why not?
Thank you

Hello

Hello from the Canada

You must install the converter Plugin into your new PC

Go to Plugins, then install the converter one.

Concerning

Infrastructure Client does not start

We just started the virtualization and the first strange problem.
We have 2 servers running EXSi and an AdminPC (Dell OptiPlex960 with teacher WinXP SP3) VMware Infrastructure Client is installed and running fine.
I need the customer also installed on my phone (Samsung X 460 runs teacher WinXP SP3) BUT the client does NOT work - error message is:
VpxClient.exe - Application error
The application failed to initialize properly (0xc0000135). Click OK to complete...
Installation files have been downloaded from the same EXSi server and we are not aware of major differences between the applications installed on both machines.
Installation completed successfully on the laptop, but the client does not start...
Thank you
Thomas

Have you installed the latest .net Framework?

Kind regards

Gerrit Lehr

If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

My Dell client does not install on XPS 8300

Having a lot of problems with the computer down and freezing. Want to run diagnostics, but the My Dell client does not install. He gets in what concerns the 'system requirements check', and then disappears. Tried running in administrator mode. Troubleshooting of Windows compatibility shows that the program is not compatible. Running Windows 7. Any suggestions? Thank you.

Hi Ijltisch,

Why not just start on the F12 diagnostics partition and run Dell diagnostics from there?

Client VPN router IOS does not connect

Hi all

I'm having some trouble of Client VPN connection over the internet to our Cisco IOS router. Some help would be very appreciated!

On the VPN client log I get the following error messages:

---------------------------

...

573 16:32:13.164 21/12/05 Sev = WARNING/2 IKE/0xE3000099

Size invalid SPI (PayloadNotify:116)

574 16:32:13.164 21/12/05 Sev = Info/4 IKE/0xE30000A4

Invalid payload: said length of payload, 568, not enough Notification:(PayloadList:149)

575 16:32:13.164 21/12/05 Sev = WARNING/3 IKE/0xA3000058

Received incorrect message or negotiation is no longer active (message id: 0x00000000)

---------------------------

We get debugging on the router that I'm trying to connect:

---------------------------

router #debug isakmp crypto

...

21 Dec 16:32:16.089 AEDT: ISAKMP (0:0): received 203.153.196.1 packet dport 500 sport 500 SA NEW Global (N)

21 Dec 16:32:16.089 AEDT: ISAKMP: created a struct peer 203.153.196.1, peer port 500

21 Dec 16:32:16.089 AEDT: ISAKMP: new created position = 0x678939E0 peer_handle = 0 x 80000031

21 Dec 16:32:16.089 AEDT: ISAKMP: lock struct 0x678939E0, refcount IKE peer 1 for crypto_isakmp_process_block

21 Dec 16:32:16.089 AEDT: ISAKMP: 500 local port, remote port 500

21 Dec 16:32:16.089 AEDT: insert his with his 67B0AB34 = success

21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): treatment ITS payload. Message ID = 0

21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): payload ID for treatment. Message ID = 0

21 Dec 16:32:16.089 AEDT: ISAKMP (0:0): payload ID

next payload: 13

type: 11

ID of the Group: eggs

Protocol: 17

Port: 500

Length: 12

21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): peer games * no * profiles

21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): load useful vendor id of treatment

21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): supplier code seems the unit/DPD but major incompatibility of 215

21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): provider ID is XAUTH

21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): load useful vendor id of treatment

21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): provider ID is DPD

21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): load useful vendor id of treatment

21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): supplier code seems the unit/DPD but major incompatibility of 194

21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): load useful vendor id of treatment

21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): supplier code seems the unit/DPD but major incompatibility of 123

21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): provider ID is NAT - T v2

21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): load useful vendor id of treatment

21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): provider ID is the unit

21 Dec 16:32:16.089 AEDT: ISAKMP: analysis of the profiles for xauth...

.....

21 Dec 16:32:16.093 AEDT: ISAKMP: (0:0:N / A:0): atts are not acceptable. Next payload is 3

21 Dec 16:32:16.093 AEDT: ISAKMP: (0:0:N / A:0): audit ISAKMP transform 12 against the policy of priority 3

21 Dec 16:32:16.093 AEDT: ISAKMP: 3DES-CBC encryption

21 Dec 16:32:16.093 AEDT: ISAKMP: MD5 hash

21 Dec 16:32:16.093 AEDT: ISAKMP: group by default 2

21 Dec 16:32:16.093 AEDT: ISAKMP: pre-shared key auth

21 Dec 16:32:16.093 AEDT: ISAKMP: type of life in seconds

21 Dec 16:32:16.093 AEDT: ISAKMP: life (IPV) 0x0 0 x 20 0xC4 0x9B

21 Dec 16:32:16.093 AEDT: ISAKMP: (0:0:N / A:0): pre-shared authentication offered but does not match policy.

21 Dec 16:32:16.093 AEDT: ISAKMP: (0:0:N / A:0): atts are not acceptable. Next payload is 3

---------------------------

You can apply the encryption the WAN interface card and check?

Windows - Internet access, no split Tunnel L2TP VPN Clients does not

Greetings!

I have four ASA 5505 that I configured with 4 site to site VPN tunnels (works perfectly) to connect to our company facilities 4. The ASA is also configured with remote access L2TP/IPsec so that a specific group of users of portable computers can connect to and access to all facilities. It also works very well except for one important exception - my split tunnel setting doesn't seem to work, because I can't connect to the Internet outside the VPN resources.

I accept the inherent risk of allowing tunnels to split from a security point of view since I take the necessary steps to secure the systems used for remote access. I would appreciate any feedback on how to get the job of split tunnel.

Here is the configuration:

: Saved
:
ASA Version 1.0000 11
!
SGC hostname
domain somewhere.com
names of
COMMENTS COMMENTS LAN 192.168.2.0 name description
name 75.185.129.13 description of SGC - external INTERNAL ASA
name 172.22.0.0 description of SITE1-LAN Ohio management network
description of SITE2-LAN name 172.23.0.0 Lake Club Network
name 172.24.0.0 description of training3-LAN network Southwood
description of training3 - ASA 123.234.8.124 ASA Southwoods name
INTERNAL name 192.168.10.0 network Local INTERNAL description
description of name 192.168.11.0 INTERNAL - VPN VPN INTERNAL Clients
description of Apollo name 192.168.10.4 INTERNAL domain controller
description of DHD name 192.168.10.2 Access Point #1
description of GDO name 192.168.10.3 Access Point #2
description of Odyssey name 192.168.10.5 INTERNAL Test Server
CMS internal description INTERNAL ASA name 192.168.10.1
name 123.234.8.60 description of SITE1 - ASA ASA management Ohio
description of SITE2 - ASA 123.234.8.189 Lake Club ASA name
description of training3-VOICE name Southwood Voice Network 10.1.0.0
name 172.25.0.0 description of training3-WIFI wireless Southwood
!
interface Vlan1
nameif outside
security-level 0
IP address dhcp setroute
!
interface Vlan2
nameif INSIDE
security-level 100
255.255.255.0 SGC-internal IP address
!
interface Vlan3
nameif COMMENTS
security-level 50
IP 192.168.2.1 255.255.255.0
!
interface Ethernet0/0
Time Warner Cable description
!
interface Ethernet0/1
switchport access vlan 2
switchport trunk allowed vlan 2-3
switchport vlan trunk native 2
switchport mode trunk
!
interface Ethernet0/2
switchport access vlan 2
switchport trunk allowed vlan 2-3
switchport vlan trunk native 2
switchport mode trunk
!
interface Ethernet0/3
switchport access vlan 2
switchport trunk allowed vlan 2-3
switchport vlan trunk native 2
switchport mode trunk
!
interface Ethernet0/4
switchport access vlan 2
switchport trunk allowed vlan 2-3
switchport vlan trunk native 2
switchport mode trunk
!
interface Ethernet0/5
switchport access vlan 2
switchport trunk allowed vlan 2-3
switchport vlan trunk native 2
switchport mode trunk
!
interface Ethernet0/6
Description for Wireless AP Trunk Port
switchport access vlan 2
switchport trunk allowed vlan 2-3
switchport vlan trunk native 2
switchport mode trunk
!
interface Ethernet0/7
Description for Wireless AP Trunk Port
switchport access vlan 2
switchport trunk allowed vlan 2-3
switchport vlan trunk native 2
switchport mode trunk
!
boot system Disk0: / asa821-11 - k8.bin
Disk0: / config.txt boot configuration
passive FTP mode
clock timezone IS - 5
clock to summer time EDT recurring
DNS domain-lookup outside
INTERNAL DNS domain-lookup
DNS domain-lookup GUEST
DNS server-group DefaultDNS
Name-Server 4.2.2.2
domain somewhere.com
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
DM_INLINE_TCP_1 tcp service object-group
EQ port 3389 object
port-object eq www
EQ object of the https port
EQ smtp port object
the DM_INLINE_NETWORK_1 object-group network
network-object SITE1-LAN 255.255.0.0
network-object SITE2-LAN 255.255.0.0
network-object training3-LAN 255.255.0.0
object-group training3-GLOBAL network
Southwood description Global Network
network-object training3-LAN 255.255.0.0
network-object training3-VOICE 255.255.0.0
network-object training3-WIFI 255.255.0.0
DM_INLINE_TCP_2 tcp service object-group
EQ port 5900 object
EQ object Port 5901
object-group network INTERNAL GLOBAL
Description Global INTERNAL Network
network-object INTERNAL 255.255.255.0
network-object INTERNALLY-VPN 255.255.255.0
access-list outside_access note Pings allow
outside_access list extended access permit icmp any CMS-external host
access-list outside_access note that VNC for Camille
outside_access list extended access permit tcp any host CMS-external object-group DM_INLINE_TCP_2
access-list outside_access note INTERNAL Services
outside_access list extended access permit tcp any host CMS-external object-group DM_INLINE_TCP_1
DefaultRAGroup_splitTunnelAcl list standard access allowed INTERNAL 255.255.255.0
access-list sheep extended ip INTERNAL 255.255.255.0 allow INTERNAL VPN 255.255.255.0
access-list extended sheep allowed ip IN-HOUSE-GLOBAL SITE1-LAN 255.255.0.0 object-group
access-list extended sheep allowed ip IN-HOUSE-GLOBAL SITE2-LAN 255.255.0.0 object-group
access-list extended sheep allowed ip object-IN-HOUSE-GLOBAL object group training3-GLOBAL
access-list INTERNAL-to-SITE1 extended permit ip IN-HOUSE-GLOBAL SITE1-LAN 255.255.0.0 object-group
access-list INTERNAL-to-training3 extended permitted ip object-IN-HOUSE-GLOBAL object group training3-GLOBAL
access-list INTERNAL-to-SITE2 extended permit ip IN-HOUSE-GLOBAL SITE2-LAN 255.255.0.0 object-group
no pager
Enable logging
exploitation forest asdm warnings
Debugging trace record
Outside 1500 MTU
MTU 1500 INTERNAL
MTU 1500 COMMENTS
192.168.11.1 mask - local 192.168.11.25 pool IN-HOUSE VPN IP 255.255.255.0
no failover
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 623.bin
enable ASDM history
ARP timeout 14400
Global 1 interface (outside)
(INTERNAL) NAT 0 access-list sheep
NAT (INTERNAL) 1 0.0.0.0 0.0.0.0
NAT (GUEST) 1 0.0.0.0 0.0.0.0
5900 5900 Camille netmask 255.255.255.255 interface static tcp (GUEST, outdoor)
3389 3389 Apollo netmask 255.255.255.255 interface static tcp (INDOOR, outdoor)
public static tcp (INDOOR, outdoor) interface www Apollo www netmask 255.255.255.255
public static tcp (INDOOR, outdoor) interface https Apollo https netmask 255.255.255.255
public static tcp (INDOOR, outdoor) interface smtp smtp Apollo netmask 255.255.255.255
5901 puppy 5901 netmask 255.255.255.255 interface static tcp (GUEST, outdoor)
Access-group outside_access in interface outside
Timeout xlate 0:05:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
RADIUS protocol AAA-server Apollo
Apollo (INTERNAL) AAA-server Apollo
Timeout 5
key *.
AAA authentication enable LOCAL console
the ssh LOCAL console AAA authentication
AAA authentication LOCAL telnet console
AAA authentication http LOCAL console
Enable http server
http 0.0.0.0 0.0.0.0 INTERNAL
http 0.0.0.0 0.0.0.0 COMMENTS
No snmp server location
No snmp Server contact
Community SNMP-server
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set esp-3des esp-sha-hmac TRANS_ESP_3DES_SHA
Crypto ipsec transform-set transit mode TRANS_ESP_3DES_SHA
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
SYSTEM_DEFAULT_CRYPTO_MAP game 65535 dynamic-map crypto transform-set ESP-3DES-SHA TRANS_ESP_3DES_SHA
correspondence address 1 card crypto outside_map INTERNAL SITE1
card crypto outside_map 1 set of peer SITE1 - ASA
card crypto outside_map 1 set of transformation-ESP-3DES-SHA
address for correspondence card crypto outside_map 2 INTERNAL training3
outside_map 2 peer training3 - ASA crypto card game
card crypto outside_map 2 game of transformation-ESP-3DES-SHA
address for correspondence outside_map 3 card crypto INTERNAL SITE2
game card crypto outside_map 3 peers SITE2 - ASA
card crypto outside_map 3 game of transformation-ESP-3DES-SHA
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
delimiter group @.
Telnet training3 - ASA 255.255.255.255 outside
Telnet SITE2 - ASA 255.255.255.255 outside
Telnet SITE1 - ASA 255.255.255.255 outside
Telnet 0.0.0.0 0.0.0.0 INTERNAL
Telnet 0.0.0.0 0.0.0.0 COMMENTS
Telnet timeout 60
SSH enable ibou
SSH training3 - ASA 255.255.255.255 outside
SSH SITE2 - ASA 255.255.255.255 outside
SSH SITE1 - ASA 255.255.255.255 outside
SSH 0.0.0.0 0.0.0.0 INTERNAL
SSH 0.0.0.0 0.0.0.0 COMMENTS
SSH timeout 60
Console timeout 0
access to the INTERNAL administration
Hello to tunnel L2TP 100
interface ID client DHCP-client to the outside
dhcpd dns 4.2.2.1 4.2.2.2
dhcpd ping_timeout 750
dhcpd outside auto_config
!
address INTERNAL 192.168.10.100 dhcpd - 192.168.10.200
dhcpd Apollo Odyssey interface INTERNAL dns
dhcpd somewhere.com domain INTERNAL interface
interface of dhcpd option 150 ip 10.1.1.40 INTERNAL
enable dhcpd INTERNAL
!
dhcpd address 192.168.2.100 - 192.168.2.200 COMMENTS
dhcpd dns 4.2.2.1 4.2.2.2 interface COMMENTS
enable dhcpd COMMENTS
!

a basic threat threat detection
statistical threat detection port
Statistical threat detection Protocol
Statistics-list of access threat detection
a statistical threat detection tcp-interception rate-interval 30 burst-400-rate average rate 200
NTP server 192.43.244.18 prefer external source
WebVPN
allow outside
CSD image disk0:/securedesktop-asa-3.4.2048.pkg
SVC disk0:/sslclient-win-1.1.4.179.pkg 1 image
SVC disk0:/anyconnect-win-2.4.1012-k9.pkg 2 image
enable SVC
Group Policy DefaultRAGroup INTERNAL
attributes of Group Policy DefaultRAGroup
Server DNS 192.168.10.4 value
Protocol-tunnel-VPN l2tp ipsec
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list DefaultRAGroup_splitTunnelAcl
value by default-domain somewhere.com
Group Policy DefaultWEBVPNGroup INTERNAL
attributes of Group Policy DefaultWEBVPNGroup
VPN-tunnel-Protocol webvpn
Group Policy DefaultL2LGroup INTERNAL
attributes of Group Policy DefaultL2LGroup
Protocol-tunnel-VPN IPSec l2tp ipsec
Group Policy DefaultACVPNGroup INTERNAL
attributes of Group Policy DefaultACVPNGroup
VPN-tunnel-Protocol svc
attributes of Group Policy DfltGrpPolicy
value of 192.168.10.4 DNS Server 4.2.2.2
VPN - 25 simultaneous connections
VPN-idle-timeout no
Protocol-tunnel-VPN IPSec
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list DefaultRAGroup_splitTunnelAcl
value by default-domain somewhere.com
the value INTERNAL VPN address pools
chip-removal-disconnect disable card
WebVPN
SVC keepalive no
client of dpd-interval SVC no
dpd-interval SVC bridge no
value of customization DfltCustomization
attributes global-tunnel-group DefaultRAGroup
VPN INTERNAL address pool
Group Policy - by default-DefaultRAGroup
IPSec-attributes tunnel-group DefaultRAGroup
pre-shared-key *.
Disable ISAKMP keepalive
tunnel-group DefaultRAGroup ppp-attributes
No chap authentication
no authentication ms-chap-v1
ms-chap-v2 authentication
attributes global-tunnel-group DefaultWEBVPNGroup
VPN INTERNAL address pool
Group Policy - by default-DefaultWEBVPNGroup
tunnel-group 123.234.8.60 type ipsec-l2l
IPSec-attributes tunnel-group 123.234.8.60
pre-shared-key *.
tunnel-group 123.234.8.124 type ipsec-l2l
IPSec-attributes tunnel-group 123.234.8.124
pre-shared-key *.
tunnel-group 123.234.8.189 type ipsec-l2l
IPSec-attributes tunnel-group 123.234.8.189
pre-shared-key *.
type tunnel-group DefaultACVPNGroup remote access
attributes global-tunnel-group DefaultACVPNGroup
VPN INTERNAL address pool
Group Policy - by default-DefaultACVPNGroup
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
inspect the http
inspect the they
!
global service-policy global_policy
context of prompt hostname
Cryptochecksum:423c807c0d63cb3e9aeceda977053f84
: end
ASDM image disk0: / asdm - 623.bin
ASDM location Camille 255.255.255.255 INTERNAL
ASDM location INTERNAL CGT-external 255.255.255.255
ASDM location INTERNAL SITE1-LAN 255.255.0.0
ASDM location INTERNAL SITE2-LAN 255.255.0.0
ASDM location INTERNAL training3-LAN 255.255.0.0
ASDM location INTERNAL training3 - ASA 255.255.255.255
ASDM location INTERNAL GDO 255.255.255.255
ASDM location INTERNAL SITE1 - ASA 255.255.255.255
ASDM location INTERNAL SITE2 - ASA 255.255.255.255
ASDM location INTERNAL training3-VOICE 255.255.0.0
ASDM location puppy 255.255.255.255 INTERNAL
enable ASDM history

I should also mention that my test clients are a combination of Windows XP, Windows 7, and Windows Mobile. Other that in specifying the preshared key and forcing L2TP/IPsec on the client side, the VPN settings on clients are the default settings with the help of MS-CHAP/MS-CHAPv2.

You must configure * intercept-dhcp enable * in your group strategy:

attributes of Group Policy DefaultRAGroup

attributes of Group Policy DefaultRAGroup

Server DNS 192.168.10.4 value
Protocol-tunnel-VPN l2tp ipsec
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list DefaultRAGroup_splitTunnelAcl
value by default-domain somewhere.com

Intercept-dhcp enable

-Latptop VPN clients (which I assume are on windows computers) is also the * use on remote network default gateway * box unchecked. It is located on the Advanced tab of VPN client TCP/IP properties. Select Client VPN > properties > Networking > TCP/IP Internet Protocol > properties > advanced and uncheck the box.

Alex

Router Cisco client VPN SPlit tunnel does not work

Hello!
I have configured the Cisco VPN CLient on a 2821 router, and it works fine.
I could access the inside resourses normally >
the problem is that when I connect with VPN I lost internet connectivity?

What wrong with my setup?

Below the current configuration of the router.
Kind regards!

CISCO2821 #sh run

Building configuration...

Current configuration: 5834 bytes

!

version 12.4

horodateurs service debug datetime msec

Log service timestamps datetime msec

no password encryption service

!

hostname CISCO2821

!

boot-start-marker

start the flash c2800nm-adventerprisek9 - mz.124 - 20.T.bin system

boot-end-marker

!

forest-meter operation of syslog messages

logging buffered 51200 warnings

!

AAA new-model

!

!

connection local VPN-LOCAL-AUTHENTIC AAA authentication

local AAA authorization network VPN-LOCAL-AUTHOR

!

!

AAA - the id of the joint session

!

dot11 syslog

IP source-route

!

!

IP cef

!

!

"yourdomain.com" of the IP domain name

8.8.8.8 IP name-server

No ipv6 cef

!

Authenticated MultiLink bundle-name Panel

!

!

voice-card 0

No dspfarm

!

!

username secret privilege 0 vpn 5 $1$ tCf1$ XAxQWtDRYdfy9g3JpVSvZ.

Archives

The config log

hidekeys

!

!

crypto ISAKMP policy 44

BA aes

preshared authentication

Group 2

life 44444

!

ISAKMP crypto group configuration of VPN client

key VPNVPNVPN

VPN-pool

ACL VPN-ACL-SPLIT

Max-users 5000

!

!

ISAKMP crypto ISAKMP-VPN-profile

identity VPN group match

list of authentication of client VPN-LOCAL-AUTHENTIC

VPN-LOCAL-AUTHOR of ISAKMP authorization list.

client configuration address respond

Configuration of VPN client group

virtual-model 44

!

!

Crypto ipsec transform-set VPN - SET esp - aes esp-sha-hmac

!

Crypto ipsec VPN-profile

transformation-VPN-SET game

Set isakmp VPN ISAKMP-PROFILE

!

!

interface GigabitEthernet0/0

IP 192.168.2.214 255.255.255.0

NAT outside IP

IP virtual-reassembly

IP tcp adjust-mss 1412

automatic duplex

automatic speed

!

interface GigabitEthernet0/1

IP 192.168.1.1 255.255.255.0

IP nat inside

IP virtual-reassembly

IP tcp adjust-mss 1412

automatic duplex

automatic speed

!

interface FastEthernet0/0/0

no ip address

Shutdown

automatic duplex

automatic speed

!

type of interface virtual-Template44 tunnel

IP unnumbered GigabitEthernet0/0

ipv4 ipsec tunnel mode

Tunnel ipsec VPN-PROFILE protection profile

!

interface Dialer0

no ip address

IP mtu 1452

IP virtual-reassembly

Shutdown

!

local pool IP VPN-POOL 192.168.1.150 192.168.1.250

IP forward-Protocol ND

IP http server

IP 8081 http port

23 class IP http access

local IP http authentication

no ip http secure server

IP http timeout policy slowed down 60 life 86400 request 10000

!

!

IP nat inside source list ACL - NAT interface GigabitEthernet0/0 overload

!

IP access-list standard ACL-TELNET

allow a

!

extended ACL - NAT IP access list

ip permit 192.168.1.0 0.0.0.255 any

IP extended ACL-VPN-SPLIT access list

ip permit 192.168.1.0 0.0.0.255 192.168.1.0 0.0.0.255

scope of access to IP-VPN-ACL-SPLIT list

!

control plan

!

exec banner ^ C

% Warning of password expiration.

-----------------------------------------------------------------------

Professional configuration Cisco (Cisco CP) is installed on this device

and it provides the default username "cisco" single use. If you have

already used the username "cisco" to connect to the router and your IOS image

supports the option "unique" user, that user name is already expired.

You will not be able to connect to the router with the username when you leave

This session.

It is strongly recommended that you create a new user name with a privilege level

15 using the following command.

username secret privilege 15 0

Replace and with the username and password you want

use.

-----------------------------------------------------------------------

Line con 0

exec-timeout 0 0

Synchronous recording

line to 0

line vty 0 4

ACL-TELNET access class in

exec-timeout 30 0

privilege level 15

Synchronous recording

transport input telnet ssh

line vty 5 15

ACL-TELNET access class in

exec-timeout 30 0

privilege level 15

Synchronous recording

transport input telnet ssh

line vty 16 988

ACL-TELNET access class in

exec-timeout 30 0

Synchronous recording

transport input telnet ssh

!

Scheduler allocate 20000 1000

end

CISCO2821 #.

I think that you made a mistake with your ACL name. the ACL applied is "VPN-ACL-SPLIT" which is an empty ACL. You must switch to that of "ACL-VPN-SPLIT" that has the entry "ip 192.168.1.0 allow 0.0.0.255 192.168.1.0 0.0.0.255" inside.

VPN between ASA does not

Hello world

hope you can help us with a problem.

We try to create a tunnel vpn site-to-site between offices in different countries. We create 4 vpn tunnel, 3 of them are working right now, but there is an ASA which does not allow the connection.

On our side, we have an ASA 5516 running firmware version 9.5 (1) that has this configuration:

ti_jamaica list of allowed ip extended access any object host_10.10.10.252

NAT (inside, outside) 1 dynamic source any destination host static 10.10.10.252 host_10.111.0.10 host_10.10.10.252

Crypto ipsec transform-set esp-aes-256 ikev1, esp-md5-hmac ts_jamaica

card crypto vpnpbs 1 match address ti_jamaica
card crypto vpnpbs 1 set of peer XXX.XXX.XXX.XXX
card crypto 1 ikev1 transform-set ts_jamaica set vpnpbs

tunnel-group, type ipsec-l2l XXX.XXX.XXX.XXX
tunnel-group ipsec-attributes XXX.XXX.XXX.XXX
IKEv1 pre-shared-key vpn1234

internal GroupPolicy_xxx group strategy
attributes of Group Policy GroupPolicy_xxx
Ikev1 VPN-tunnel-Protocol

Crypto ikev1 allow outside
IKEv1 crypto policy 11
preshared authentication
aes-256 encryption
md5 hash
Group 2
life 86400

On the other side, our office has an ASA (don't know the model) running firmware version 8.2 with this configuration

permit access list extended ip host 10.10.10.252 Outside_21_cryptomap 10.111.0.10

Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

crypto Outside_map 21 card matches the address Outside_21_cryptomap
card crypto Outside_map 21 set pfs
card crypto Outside_map 21 peer set XXX.XXX.XXX.XXX
card crypto Outside_map 21 the transform-set ESP-AES-256-MD5 value

tunnel-group, type ipsec-l2l XXX.XXX.XXX.XXX
tunnel-group ipsec-attributes XXX.XXX.XXX.XXX
pre-shared-key vpn1234

crypto ISAKMP policy 170
preshared authentication
aes-256 encryption
md5 hash
Group 2
life 86400

but I get this error on «See the ikev1 debugging»

11 February 15:32:06 [IKEv1] group = IP XXX.XXX.XXX.XXX XXX.XXX.XXX.XXX, Session = is to be demolished. Reason: The user has requested

11 February 15:32:11 [IKEv1] Group = XXX.XXX.XXX.XXX, IP = XXX.XXX.XXX.XXX, removal table correlator counterpart has failed, no match!

I already check that this error message, it indicates that there is a configuration issue between both sides of the VPN, according to the manual, it the encryption and hash does not match their topic, but we think we have the right configuration.

I appreciate any help or advice on your part.

Best regards

First of all your cryptographic domains do not match, correct so that the first. They are the same on both sides.

That's what they say.
```
access-list ti_jamaica extended permit ip any object host_10.10.10.252
```
And the other.
```
access-list Outside_21_cryptomap extended permit ip host 10.10.10.252 host 10.111.0.10
```

Desktop client does not

When I use the desktop client, it will not load Skype. I don't see my friends, they are not me, nor can I send/receive messages, but when I use the version of app or my outlook e-mail, these versions work fine. Clues to why the desktop version does not work? I have a windows 8.1

Thank you

Are you the online on Skype online status? The status icon next to your name should be green with a white check mark inside. Try to change the status by using the drop-down arrow next to this icon.

Error PXE 3000 N100, does not start BIOS

Hello people,

I recently picked up some laptop second hand and projects for free time and learn a little more. One of them is a Lenovo 3000 N100. I'm not sure of the exact model as the COA sticker is worn. The laptop came without RAM, a hard drive or battery! I am aware that this may be more effort than its worth, but wanted to give it a go...

With RAM installed, shows the white startup Lenovo screen (sometimes quickly, sometimes takes forever) - if I press ESC, then the following information is displayed:

Unknown project ID! BIOS version? 61ET32WW

CPU = Intel (R) Celeron (R) M CPU 410 @ 1.46 GHz

1023 M system RAM passed

1024K Cache SRAM Passes

System BIOS with a shadow

Video BIOS with a shadow

CD ROM...

Initialized the mouse

Pressing F1 or F12 does nothing.

The following errors are then displayed, which Google I see is a common problem. However, I can't find a fix that applies to me.

PXE - E61: Media test failure, check cable of

PXE:MOF: get out the PXE ROM

Operating system not found.

From what I see online, the portable computer tries to boot from a network/LAN. I tried a XP boot CD with no joy.

I can't access BIOS to change boot priority.

The RAM seems to work judging by the messages above?

I tried to put in a blank disk and remove it (tested with novatech adapter USB SATA, HDD seems to work well).

Is my next option to reset the CMOS battery? I should add that on the first screen, I received at the start of error codes 0271 and 0251 regarding the date system and time and CMOS checksum bad, but after leaving the laptop plugged in all night, they make their appearance is no longer.

No wonder that BIOS was confusing - it turns out that F1 and F12 are dead keys, and one of the Ctrl keys (I used an online keyboard controller to test). Access key for the BIOS and to the startup list both did not work. I managed to access BIOS by using a USB keyboard. I think I'll try reinstalling the keyboard first, if this does not work, have a go at a personal key, and if it works no - one second hand keyboard. BIOS is not the latest version, but I guess that there is not a huge need to update?

XP is installed for now, because I don't have spare keys Windows 7. I have a few modules of 2 GB of RAM, so it will move to the 3 GB maximum. Then decide to keep or not! I have a Z60M I prefer, so that this one will probably get donated or sold. Just a shame the RAM is so limited on them.

Microsoft Lifecam vx-3000 webcam does not work with all applications.

Original title: lifecam vx-3000.

LifeCam vx-3000, was used for years a couple works very well now it seems to work well for messenger and works when lifecam program is open however does not work if I try and use it on any other web site? Web cam starts picture freezes up with a still image or just empty. Yet once downloaded the software and drivers off microsoft site. Guess it is just a setting. Any suggestions?

Thank you

Hello

1. have you made any hardware changes or software on the computer before this problem?

2. what websites you are talking about?

You can follow this link & check if the problem persists:

Don't troubleshoot bad or no video or problems to start the LifeCam software

Hope the helps of information.

How can I correct a problem accessing my firewall settings because the Group Policy client does not connect to windows?

I have tried everything recently adjust the settings of the firewall from my window and a box appears saying that after an unidentified error, I can't access my firewall. After some research, I discovered that it was because my client group policy server does not connect and a small box appears saying that whenever I connect to my laptop. It is not effect my use of the internet at all, so I've never bothered to see what that meant until now I need to access my firewall. I tried to adjust the settings in group policy, but everything is gray and I can't change anything. I use an admin account so I don't know why I can't set the parameters. I'm completely stuck and I don't know that much about computers. Is there anything else I can try? I also tried a system restore, but it lasts for a long time and I can return only 5 days. Thank you

Hi Sheldon,

Are you connected or connected to a work network or domain? If so, this could be a policy governed by your network administrator, and you will not be able to change it.

You might try to tell scientists on TechNet on your question to see if they have a better answer for you:

http://social.technet.Microsoft.com/forums/en-us/itprovistanetworking/threads

Authentication of VPN 3000 Client does not

Similar Questions

Maybe you are looking for