Authorization failed second e-reader
Adobe Digital Editions V 4.5.1.139278
Authorization of the computer: OK
Permission of E-reader 1: OK
Authoristions E-Reader 2: fault activation server without code.
the two E-readers are same type AURA-KOBO
tried to:
Reinstall the software Adobe digital editions.
Turn off the firewall.
No solution.
What should do?
Problem solved with the help of the Dutch library.
The teamviewer used to help out me.
Problem is in the registry
After that the computer authorization was possible and also approval of 2 e - readers.
Problem solved.
Tags: Adobe
Similar Questions
-
Satellite P100 - 307 Error Message: "failed to get read handle.
"Failed to get read handle." Error message that appears whenever I start my laptop. HELP, its boring
Error message that reads "Failed to get read handle." lies at the heart of my screen. Strange that it has an OK button, which means that the computer expects me to think it's ok. It's like the 'So what' button which really did not help them that my computer failed to get read manages? How can I get rid of this message? And why he's here.
It's like setting up a new cell phone and the first time you receive your new number to a text message comes on the screen saying "Otta OK." Who the hell is Otta and what was wrong with Otta initially. In any case, anyone could help me with this, I would of course welcome.
Hi Thorsten
My first question is; What to hell you have on your laptop?
I never saw the message as "Failed to get read handle."
I have goggled autour and nothing!Are you able to get into the operating system? O If yes try to restore the operating system to the beginning.
I put t know what you have installed or not installed on the device but I can t believe this is happening without any reason. -
Initialization failed: couldn't read the boot disk - Acer C720
Hey guys,.
I really hope you guys can help me. -So I got an Acer C720 and using one of the probably hundreds of tutorials out there, I upgraded the SSD inside. I bought the recommended (MyDigitalSSD SC2 Super Cache 2 42mm SATA III 6 G m2 NGFF M2 SSD Solid State Drive (64 GB)). Anyway, the computer froze today so I pressed and held the power button until it stops.
When I turned it back on I was greeted with the warning. "Initialization failed: couldn't read the startup disk ' ideas? I have a few documents on this subject that I really need back. I put the original SSD inside and it booted up fine, but it won't start using the cotyledon. It's barely 8 months! Any ideas on what I can do? Thank you!
Contact Acer for warranty repair. http://us.Acer.com/AC/en/us/content/service
-
Hardware diagnostics: "SMART short Self Test - failed" and "targeted read Test Failed.
Original title: "SMART short Self Test - failed" and "targeted read Test Failed", all the patches?
When using PC checkup of Dell I get the following errors; during the analysis of the material. "SMART short self-test - failed" and "targeted read Test Failed", all the patches?
Hello Duane,
Teke section of the Web site that speaks of similar problem.
http://forums.techguy.org/hardware/906455-smart-short-self-test-fail.html
The problem is with the hardware and you can get in touch with Dell computers.
-
AAA authorization fails, but still command is executed...
Hello world
I've implemented the authorization and he basically works. The user can only use a limited set of commands (show int status, conf t interface ethernet, gigabitethernet interface, interface fastethernet, closed, non-stop).
Now, I'm trying to configure a loopback or interface Vlan, which should not be allowed.
COMMANDS IN ŒUVRE:
AAA authorization config-commands
AAA authorization commands vty 0 group Ganymede + none
AAA authorization commands 1 vty group Ganymede + none
AAA authorization commands 15 vty group Ganymede + noneline vty 0 15
authorization to control vty 0
vty orders 1 authorization
authorization orders 15 vtyCOMMAND AND THE OUTPUT FROM THE TESTS:
SWITCH (config) #int vlan 2
Authorization of command failed.DEBUG AAA APPROVAL:
SWITCH #.
7 Dec 14:31:50: AAA: analyze name = tty1 BID type =-1 ATS = - 1
7 Dec 14:31:50: AAA: name = tty1 flags = 0 x 11 type = 5 shelf = 0 = 0 = 0 = 1 0 = channel port adapter slot
7 Dec 14:31:50: AAA/MEMORY: user create_user (0x46603F4) = "USER1" ruser = 'SWITCH' ds0 = 0 port =
"tty1' rem_addr'10.10.255.249 = 'authen_type = ASCII service = NONE priv = 15 initial_task_id = ' 0', vrf = (id = 0)
7 Dec 14:31:50: tty1 AAA/AUTHOR/CMD (60725991): Port = list "tty1" = "SCA" service = CMD
7 Dec 14:31:50: AAA/AUTHOR/CMD: tty1 user (60725991) = "USER1".
7 Dec 14:31:50: tty1 AAA/AUTHOR/CMD (60725991): send service AV = shell
7 Dec 14:31:50: tty1 AAA/AUTHOR/CMD (60725991): send cmd = interface AV
7 Dec 14:31:50: tty1 AAA/AUTHOR/CMD (60725991): send cmd - arg = AV Vlan
7 Dec 14:31:50: tty1 AAA/AUTHOR/CMD (60725991): send cmd - arg = 2 AV
7 Dec 14:31:50: tty1 AAA/AUTHOR/CMD (60725991): send cmd - arg = AV
7 Dec 14:31:50: tty1 AAA/AUTHOR/CMD (60725991): found the list "SCA".
7 Dec 14:31:50: tty1 AAA/AUTHOR/CMD (60725991): method = Ganymede + (Ganymede +)
7 Dec 14:31:50: AAA/AUTHOR/TAC +: (60725991): user = User1
7 Dec 14:31:50: AAA/AUTHOR/TAC +: (60725991): send service AV = shell
7 Dec 14:31:50: AAA/AUTHOR/TAC +: (60725991): send cmd = interface AV
7 Dec 14:31:50: AAA/AUTHOR/TAC +: (60725991): send cmd - arg = AV Vlan
7 Dec 14:31:50: AAA/AUTHOR/TAC +: (60725991): send cmd - arg = 2 AV
7 Dec 14:31:50: AAA/AUTHOR/TAC +: (60725991): send cmd - arg = AV
7 Dec 14:31:50: AAA/AUTHOR (60725991): permission post = FAIL
7 Dec 14:31:50: AAA/MEMORY: free_user (0x46603F4) user = "USER1" ruser = "SWITCH" port = "tty1" r
em_addr = '10.10.255.249' authen_type = ASCII service = NONE priv = 15
As you can see the answer of the Ganymede is a "FAILURE", but still the command is executed.
RESULT:
SWITCH #sh run int vlan 2
Building configuration...Current configuration: 38 bytes
!
interface Vlan2
no ip address
endQUESTION:
I don't understand what the problem... Since I get a Ganymede Server FAILURE I guess that the configuration of this side is fine.
But why the button ignore a FAILURE, always run the command? Same problem exists with the loopback Interface.
Is it just me not the basic concept of AAA understandig or is it another problem?
The switch is a Cisco WS-C3750-24TS (running c3750-ipbasek9 - mz.122 - 50.SE2.bin).
The Ganymede running Cisco Secure ACS4.2.0.124
Thank you
Tom
Hi Tom,
It's CSCtd49491 : GANYMEDE authorization failed-command for the configuration of the interface.
The bug is currently in a closed state, which means that the "bug report is valid, but a conscious decision accomplished not remedy all or all outputs."
As far as I know, the impact is rather limited, given that the interface that is created has no effect unless the vlan exists, and even in this case, the effect is minimal since it cannot be configured.
You can open a TAC case or work with your account team to get the bug if it is still a matter of concern but has reopened.
HTH
Herbert
-
MAB with Cisco Phone - authorization failed
Hello everyone,
I use MAB to authenticate customers and Cisco IP phones against a NPS Microsoft Radius server. Everything works perfectly, except for 1 phone Cisco. The phone is successfully authentication but authorization fails. The switch port has the following configuration.
switchport access vlan 500
switchport mode access
switchport nonegotiate
switchport voice vlan 92
no logging event link-status
srr-queue bandwidth share 1 30 35 5
priority-queue out
authentication control-direction in
authentication event server dead action authorize voice
authentication host-mode multi-domain
authentication port-control auto
authentication periodic
authentication timer reauthenticate 10800
authentication timer inactivity 1800
mab
no snmp trap link-status
mls qos trust device cisco-phone
mls qos trust cos
macro description mab
auto qos voip cisco-phone
storm-control broadcast level 5.00
storm-control action shutdown
spanning-tree portfast
spanning-tree bpduguard enable
service-policy input AUTOQOS-SRND4-CISCOPHONE-POLICY
I get the following RADIUS logging of the client authentication process.
May 7 15:24:53.349: RADIUS: 4D 8F 05 AB 00 00 01 37 00 01 02 00 0A 19 0A 84 00 00 00 00 00 00 00 00 00 00 00 00 01 CE 47 DF 2A A4 B3 70 00 00 00 00 00 00 5F 79 [ M7G*p_y]
May 7 15:24:53.349: RADIUS: Vendor, Cisco [26] 34
May 7 15:24:53.349: RADIUS: Cisco AVpair [1] 28 "device-traffic-class=voice"
May 7 15:24:53.358: RADIUS(00002749): Received from id 1645/128
May 7 15:24:53.366: %MAB-5-SUCCESS: Authentication successful for client (442b.03a2.f9e8) on Interface Gi1/0/39 AuditSessionID 0A194B0400002706ED82EB13
May 7 15:24:53.374: %AUTHMGR-7-RESULT: Authentication result 'success' from 'mab' for client (442b.03a2.f9e8) on Interface Gi1/0/39 AuditSessionID 0A194B0400002706ED82EB13
SER-02-SW01#clear authentication
May 7 15:24:53.383: %AUTHMGR-5-FAIL: Authorization failed or unapplied for client (442b.03a2.f9e8) on Interface Gi1/0/39 AuditSessionID 0A194B0400002706ED82EB13
I checked online and blogs and forums suggest to check the use of the downloadable access list, but they are not used in the switch. As mentioned, all Cisco IP phones works perfectly, except this one. I have already removed the Active Directory object and created a new object from scratch, but the same result. I also tried another port in the switch, yet an authorization failure.
Currently, I don't know where to look further, then maybe some of you can help me!
Thanks for the update of René. I have suggested for deactivation and reactivation of the dot1x in the world to see where it got stuck somewhere. However, it seems the thought is not okay. Would appreciate if you mark it resolved so that someone else can take advantages out of it.
Your welcome
Good day!
Jatin kone
-Does the rate of useful messages-
-
Hello
Can someone help me to find the number in the given pakg.
I'm tring to send e-mails through this package, but I make a few mistakes: -.
create or replace package body mail_pkg
as
function address_email (p_string in varchar2,
p_recipients table) return varchar2
is
long l_recipients;
Start
because me in 1... p_recipients. Count
loop
UTL_SMTP. RCPT (g_mail_conn, p_recipients (i));
If (l_recipients is null)
then
l_recipients: = p_string | p_recipients (i);
on the other
l_recipients: = l_recipients | ', ' || p_recipients (i);
end if;
end loop;
Return l_recipients;
end;
procedure writeData (p_text in varchar2)
as
Start
If (p_text is not null)
then
UTL_SMTP.write_data (g_mail_conn, p_text | g_crlf);
end if;
end;
procedure to send (p_sender_email in varchar2,
P_FROM in varchar2,
p_to in the table by default array(),
p_cc in the table by default array(),
p_bcc in the table by default array(),
p_subject in varchar2,
p_body long)
is
long l_to_list;
long l_cc_list;
long l_bcc_list;
l_date VARCHAR2 (255) default TO_CHAR (SYSDATE, 'dd my hh24:mi:ss yy') | ' + 8:00 (GMT + 08:00) ";
Start
SELECT PARAM_VALUE IN g_mailhost OF IHR_PARAM_DATA
WHERE PARAM_CODE = 'MAIL_HOST' AND
((CATÉGORIE = S ')) AND
(((FROM_DATE EST NULL) AND (TO_DATE IS NOTHING)) OR)
((FROM_DATE EST NULL) AND (TO_DATE > = trunc (sysdate))) OR
((FROM_DATE < = trunc (sysdate)) AND (TO_DATE IS NULL)) OR
((FROM_DATE < = trunc (sysdate)) AND (TO_DATE > = trunc (sysdate))) AND
SEQUENCE = (SELECT MIN (SEQUENCE) IHR_PARAM_DATA
WHERE PARAM_CODE = 'MAIL_HOST' AND
((CATÉGORIE = S ')) AND
(((FROM_DATE EST NULL) AND (TO_DATE IS NOTHING)) OR)
((FROM_DATE EST NULL) AND (TO_DATE > = trunc (sysdate))) OR
((FROM_DATE < = trunc (sysdate)) AND (TO_DATE IS NULL)) OR
((FROM_DATE < = trunc (sysdate)) AND (TO_DATE > = TRUNC (SYSDATE))) );
g_mail_conn: = utl_smtp.open_connection (g_mailhost, 25);
UTL_SMTP. HELO (g_mail_conn, g_mailhost);
UTL_SMTP.command (g_mail_conn, 'auth login');
UTL_SMTP.command (g_mail_conn,
mail_pkg.f_base64_encode_raw (utl_raw.cast_to_raw ('mailuser')));
UTL_SMTP.command (g_mail_conn,
mail_pkg.f_base64_encode_raw (utl_raw.cast_to_raw('***')));
UTL_SMTP.mail (g_mail_conn, p_sender_email);
l_to_list: = address_email ("to:", p_to);
l_cc_list: = address_email ("Cc:", p_cc);
l_bcc_list: = address_email ("Bcc:", p_bcc);
UTL_SMTP.open_data (g_mail_conn);
writeData (' Date: ' | l_date);
writeData (' to: ' | nvl (p_from, p_sender_email));
writeData (' subject: ' | nvl (p_subject, '(aucun sujet) "));
writeData (l_to_list);
writeData (l_cc_list);
UTL_SMTP.write_data (g_mail_conn, "| g_crlf);
UTL_SMTP.write_data (g_mail_conn, p_body);
UTL_SMTP.close_data (g_mail_conn);
UTL_SMTP. Quit (g_mail_conn);
end;
end;
I get the below error when tring to run the procedure, even if my e-mail and password are correct.
ERROR on line 1:
ORA-29279: SMTP permanent error: 535 authorization failed (#5.7.0)
ORA-06512: at "SYS." UTL_SMTP", line 21
ORA-06512: at "SYS." UTL_SMTP", line 99
ORA-06512: at "SYS." UTL_SMTP", line 159
ORA-06512: at "SYSTEM. SEND_MAIL', line 12
ORA-06512: at line 1
pls help;
Thank you
Uttam Singh
Published by: Uttam Singh on December 26, 2008 19:56Uttam,
This error is due to wrong settings of the SMTP server. Oracle, very probably has nothing to do with it. If I remember correctly, you are using Gmail for her. I guess there is a problem with it. Try with some other parameters of the field. I'll try to use the same with my own domain name. In the meantime, enjoy these two link.
http://www.williamrobertson.NET/code/utilities.pkg.txt
http://asktom.Oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:2118740358226 #9206460145191
HTH
Aman... -
Authorization failed and "accessing itunes store" maintains a loop
Hello
I have problem, first I can not connect to itunes store, can I remove the permission on this computer. But when I try to authorize dungeons failed and message "canned"accessing itunes store"loop. And after only 10 minutes I put warn something as "blah blah blah network connection has been lost. I have good connection and have no problem with any internet connection. There for 2 months I have a problem, I tried all of the solutions I found, but still I can't connect to itunes store.
I did the test proposed by Linc Davis, and the result is:
Check-out time: 12:54:10 06/22/16
Model identifier: MacPro5, 1
The system version: OS X 10.11.5 (15F34)
Kernel version: Darwin 15.5.0
Integrity of system protection: enabled
Since the start time: 02:05
SATA
WDC WD4003FZEX-00Z4SA0
Crucial_CT256MX100SSD1
WDC WD20EARS-19MVWB0
WDC WD40EZRX-00SPEB0
USB
Mouse USB LaserStream (TM) (Avago Technologies, Pte.)
Ultra (SanDisk Corporation)
boot args: nvda_drv = 1
Journal
June 22 at 11:55:24 Preview [1566] taken causing excessive Awakenings of the process. EXC_RESOURCE lost audio playback
Activity
NET: 892 in 46 (KiB/s)
The current downstream data: BitTorrent (UID 501) uses 652.857 KiB/s
The current data upstream: BitTorrent (UID 501) uses 25.9157 KiB/s
Memory: Adobe Photoshop (UID 501) use 5051 MB
kexts
com.nvidia.web.NVDAResmanWeb (10.1.1) UUID
com.nvidia.web.NVDAGK100HalWeb (10.1.1) UUID
com.nvidia.web.GeForceWeb (10.1.1) UUID
tc.tctechnologies.driver.Saffire (4.1.4 18735) UUID
com Apowersoft.driver.AudioDevice (1.6.7) UUID
com.focusrite.driver.FocusritePCIe (4.4.0 175) UUID
com.nvidia.CUDA (1.1.0) UUID
com Disc - soft.DAEMONTools.VirtualSCSIBus (1.0.2) UUID
Demons
com.macpaw.CleanMyMac3.Agent
com BlueStacks.AppPlayer.bstservice_helper
com Charlessoft.Pacifist.Helper
org.tcpdump.chmod_bpf
com.adobe.ARMDC.Communicator
com.transcend.RxRecoveryHelper
com NVIDIA. CUDA. Launcher
com.focusrite.ControlServer
com Elgato.eyeconnectd
com Microsoft.Office.Licensing.Helper
com RogueAmoeba.InstantOn - agent
com.google.Keystone.daemon
Adobe_Genuine_Software_Integrity_Service
com.adobe.SwitchBoard
Acronis.Update
com Disc - soft.DAEMONTools.PrivilegedHelper
com NVIDIA.nvroothelper
com.adobe.ARMDC.SMJobBlessHelper
com.Bombich.ccchelper
tc.tctechnologies.daemon.Saffire
Agents
com.google.Keystone.System.agent
com Disc - soft.DAEMONTools.DAEMONToolsAgent
com BlueStacks.AppPlayer.Service
com.bittorrent.BitTorrent
com.adobe.ARMDCHelper.UUID
com.adobe.CS5ServiceManager
com.macpaw.CleanMyMac3.Scheduler
com BlueStacks.AppPlayer.UninstallWatcher
com NVIDIA.nvagent
com Spotify.webhelper
com.tidal.LaunchHelper
com.nvidia.CUDASoftwareUpdate
com Acronis.Monitor
com BlueStacks.AppPlayer.Updater
launchd
/ System/Library/LaunchDaemons/com. Apple.Installer.osmessagetracing.plist
-com.apple.installer.osmessagetracing
/Library/LaunchAgents/com.Adobe.AAM.Updater-1.0.plist
-com.adobe.AAM.Startup - 1.0
/Library/LaunchAgents/com.Adobe.ARMDCHelper.UUID.plist
-com.adobe.ARMDCHelper.UUID
/Library/LaunchAgents/com.Adobe.CS5ServiceManager.plist
-com.adobe.CS5ServiceManager
/Library/LaunchAgents/com.Google.keystone.agent.plist
-com.google.keystone.system.agent
/ Library/LaunchAgents/com. NVIDIA. CUDASoftwareUpdate.plist
-com.nvidia.CUDASoftwareUpdate
/ Library/LaunchAgents/com. NVIDIA.nvagent.plist
-com.nvidia.nvagent
/ Library/LaunchDaemons/com. Acronis.Update.plist
-acronis.update
/Library/LaunchDaemons/com.Adobe.agsservice.plist
-Adobe_Genuine_Software_Integrity_Service
/Library/LaunchDaemons/com.Adobe.ARMDC.Communicator.plist
-com.adobe.ARMDC.Communicator
/Library/LaunchDaemons/com.Adobe.ARMDC.SMJobBlessHelper.plist
-com.adobe.ARMDC.SMJobBlessHelper
/Library/LaunchDaemons/com.Adobe.switchboard.plist
-com.adobe.SwitchBoard
/ Library/LaunchDaemons/com. BlueStacks.AppPlayer.bstservice_helper.plist
-com BlueStacks.AppPlayer.bstservice_helper
/Library/LaunchDaemons/com.Bombich.ccchelper.plist
-com.bombich.ccchelper
/ Library/LaunchDaemons/com. Charlessoft.Pacifist.Helper.plist
-com.charlessoft.pacifist.helper
/ Library/LaunchDaemons/com. Disc - Soft.DAEMONTools.PrivilegedHelper.plist
-com.disc - soft.DAEMONTools.PrivilegedHelper
/ Library/LaunchDaemons/com. Elgato.EyeConnect.plist
-com.elgato.eyeconnectd
/ Library/LaunchDaemons/com. Focusrite.ControlServer.plist
-com.focusrite.ControlServer
/Library/LaunchDaemons/com.Google.keystone.daemon.plist
-com.google.keystone.daemon
/Library/LaunchDaemons/com.macpaw.CleanMyMac3.agent.plist
-com.macpaw.CleanMyMac3.Agent
/ Library/LaunchDaemons/com. Microsoft.Office.Licensing.Helper.plist
-com.microsoft.office.licensing.helper
/ Library/LaunchDaemons/com. NVIDIA. CUDA. Launcher.plist
-com.nvidia.cuda.launcher
/ Library/LaunchDaemons/com. NVIDIA.nvroothelper.plist
-com.nvidia.nvroothelper
/ Library/LaunchDaemons/com. RogueAmoeba.InstantOn - agent.plist
-com.rogueamoeba.instanton - agent
/ Library/LaunchDaemons/com. Transcend.RxRecoveryHelper.plist
-com.transcend.RxRecoveryHelper
/Library/LaunchDaemons/org.tcpdump.chmod_bpf.plist
-org.tcpdump.chmod_bpf
/Library/LaunchDaemons/TC.tctechnologies.Saffire.plist
-tc.tctechnologies.daemon.Saffire
Library/LaunchAgents/com.acronis.monitor.plist
-com.acronis.monitor
Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist
-com.adobe.AAM.Scheduler - 1.0
Library/LaunchAgents/com.bittorrent.BitTorrent.plist
-com.bittorrent.BitTorrent
Com/library/LaunchAgents. BlueStacks.AppPlayer.Service.plist
-com BlueStacks.AppPlayer.Service
Com/library/LaunchAgents. BlueStacks.AppPlayer.UninstallWatcher.plist
-com BlueStacks.AppPlayer.UninstallWatcher
Com/library/LaunchAgents. BlueStacks.AppPlayer.Updater.plist
-com BlueStacks.AppPlayer.Updater
Library/LaunchAgents/com.disc-soft.DAEMONTools.DAEMONToolsAgent.plist
-com.disc - soft.DAEMONTools.DAEMONToolsAgent
Library/LaunchAgents/com.macpaw.CleanMyMac3.Scheduler.plist
-com.macpaw.CleanMyMac3.Scheduler
Library/LaunchAgents/com.spotify.webhelper.plist
-com.spotify.webhelper
Startup items
/ Library/StartupItems/ProTec6b/DemoOver
/ Library/StartupItems/ProTec6b/Nalpeirond6b
/ Library/StartupItems/ProTec6b/ProTec6b
/Library/StartupItems/ProTec6b/StartupParameters.plist
Beams
/System/Library/Extensions/AuthenticationSupport.plugin
-com SecuritySolutions.AuthenticationSupport
/System/Library/Extensions/AuthenticationSupportEnabler.plugin
-com SecuritySolutions.AuthenticationSupportEnabler
/System/Library/Extensions/CUDA.kext
-com.nvidia.CUDA
/System/Library/Extensions/FocusriteUSBAudio.kext
-com.focusrite.driver.usb.audio
/System/Library/Extensions/GeForceAIRPluginWeb.bundle
-com.nvidia.web.GeForceAIRPluginWeb
/System/Library/Extensions/GeForceGLDriverWeb.bundle
-com.nvidia.web.GeForceGLDriverWeb
/System/Library/Extensions/GeForceMTLDriverWeb.bundle
-com.nvidia.web.GeForceMTLDriverWeb
/System/Library/Extensions/GeForceTeslaGAWeb.plugin
-com.nvidia.web.GeForceTeslaGAWeb
/System/Library/Extensions/GeForceTeslaGLDriverWeb.bundle
-com.nvidia.web.GeForceTeslaGLDriverWeb
/System/Library/Extensions/GeForceTeslaVADriverWeb.bundle
-com.nvidia.web.GeForceTeslaVADriverWeb
/System/Library/Extensions/GeForceTeslaWeb.kext
-com.nvidia.web.GeForceTeslaWeb
/System/Library/Extensions/GeForceVADriverWeb.bundle
-com.nvidia.web.GeForceVADriverWeb
/System/Library/Extensions/GeForceWeb.kext
-com.nvidia.web.GeForceWeb
/System/Library/Extensions/JMicronATA.kext
-com.jmicron.JMicronATA
/System/Library/Extensions/NovationUSBAudio.kext
-com.novationmusic.driver.usb.audio
/System/Library/Extensions/NVDAGF100HalWeb.kext
-com.nvidia.web.NVDAGF100HalWeb
/System/Library/Extensions/NVDAGK100HalWeb.kext
-com.nvidia.web.NVDAGK100HalWeb
/System/Library/Extensions/NVDAGM100HalWeb.kext
-com.nvidia.web.NVDAGM100HalWeb
/System/Library/Extensions/NVDANV50HalTeslaWeb.kext
-com.nvidia.web.NVDANV50HalTeslaWeb
/System/Library/Extensions/NVDAResmanTeslaWeb.kext
-com.nvidia.web.NVDAResmanTeslaWeb
/System/Library/Extensions/NVDAResmanWeb.kext
-com.nvidia.web.NVDAResmanWeb
/System/Library/Extensions/NVDAStartupWeb.kext
-com.nvidia.NVDAStartupWeb
/System/Library/Extensions/Saffire.kext
-tc.tctechnologies.driver.Saffire
/System/Library/Extensions/Soundflower.kext
-com Cycling74.Driver.Soundflower
/ Library/Apowersoft Mac Audio Recorder/uninstall Apowersoft Audio Recorder.app
Apowersoft.Uninstall - Apowersoft-Audio-recorder
/ Library/Audio/MIDI drivers/FocusritePCIeMIDIDriver.plugin
-com.focusrite.FocusritePCIe.midiplugin
/ Library/Audio/MIDI drivers/NIUSBMIDIDriver.plugin
S/O
/ Library/Audio/MIDI drivers/NovationUSBMIDIDriver.plugin
-com.novationmusic.driver.usb.midi
/ Library/Audio/MIDI drivers/SaffireMIDIDriver.plugin
-tc.tctechnologies.Saffire.midiplugin
/ Component library/Audio/Plug-Ins/components/Guitar Rig 5.
S/O
/Library/audio/plug-ins/components/iZInsightAUHook.component
-com.izotope.audioplugins.AU.Insight
/Library/audio/plug-ins/components/iZMeterTapAUHook.component
S/O
/Library/audio/plug-ins/components/iZOzone6AUHook.component
-com.izotope.audioplugins.AU.Ozone6
/Library/audio/plug-ins/components/iZOzone6DynamicsAUHook.component
-com.izotope.audioplugins.AU.Ozone6DYN
/Library/audio/plug-ins/components/iZOzone6DynEqAUHook.component
-com.izotope.audioplugins.AU.Ozone6DYNEQ
/Library/audio/plug-ins/components/iZOzone6EqualizerAUHook.component
-com.izotope.audioplugins.AU.Ozone6EQ
/Library/audio/plug-ins/components/iZOzone6ExciterAUHook.component
-com.izotope.audioplugins.AU.Ozone6EXC
/Library/audio/plug-ins/components/iZOzone6ImagerAUHook.component
-com.izotope.audioplugins.AU.Ozone6IMG
/Library/audio/plug-ins/components/iZOzone6MaximizerAUHook.component
-com.izotope.audioplugins.AU.Ozone6MAX
/Library/audio/plug-ins/components/iZRX5ConnectAUHook.component
-com.izotope.audioplugins.AU.RX5Connect
/Library/audio/plug-ins/components/iZRX5DeclickerAUHook.component
-com.izotope.audioplugins.AU.RX5Declicker
/Library/audio/plug-ins/components/iZRX5DeclipperAUHook.component
-com.izotope.audioplugins.AU.RX5Declipper
/Library/audio/plug-ins/components/iZRX5DecracklerAUHook.component
-com.izotope.audioplugins.AU.RX5Decrackler
/Library/audio/plug-ins/components/iZRX5DenoiserAUHook.component
-com.izotope.audioplugins.AU.RX5Denoiser
/Library/audio/plug-ins/components/iZRX5DereverbAUHook.component
-com.izotope.audioplugins.AU.RX5Dereverb
/Library/audio/plug-ins/components/iZRX5DialogueDenoiserAUHook.component
-com.izotope.audioplugins.AU.RX5DlgDenoiser
/Library/audio/plug-ins/components/iZRX5HumRemovalAUHook.component
-com.izotope.audioplugins.AU.RX5HumRemoval
/Library/audio/plug-ins/components/iZRX5MonitorAUHook.component
-com.izotope.audioplugins.AU.RX5Monitor
/Library/audio/plug-ins/HAL/FocusritePCIeAudio.driver
-com.focusrite.FocusritePCIeAudio
/Library/audio/plug-ins/HAL/InstantOn.driver
-com.rogueamoeba.InstantOn.driver
/ Library/Audio/Plug-Ins/VST/Guitar Rig 5. VST
S/O
/ Library/Audio/Plug-Ins/VST/iZotope Insight.vst
-com.izotope.audioplugins.VST.Insight
/ Library/Audio/Plug-Ins/VST/iZotope meter Tap.vst
S/O
/ Library/Audio/Plug-Ins/VST/iZotope Ozone 6 dynamic EQ.vst
-com.izotope.audioplugins.VST.Ozone6DYNEQ
/ Library/Audio/Plug-Ins/VST/iZotope Ozone 6 Dynamics.vst
-com.izotope.audioplugins.VST.Ozone6DYN
/ Library/Audio/Plug-Ins/VST/iZotope Ozone 6 Equalizer.vst
-com.izotope.audioplugins.VST.Ozone6EQ
/ Library/Audio/Plug-Ins/VST/iZotope Ozone 6 Exciter.vst
-com.izotope.audioplugins.VST.Ozone6EXC
/ Library/Audio/Plug-Ins/VST/iZotope Ozone 6 Imager.vst
-com.izotope.audioplugins.VST.Ozone6IMG
/ Library/Audio/Plug-Ins/VST/iZotope Ozone 6 Maximizer.vst
-com.izotope.audioplugins.VST.Ozone6MAX
/ Library/Audio/Plug-Ins/VST/iZotope Ozone 6. VST
-com.izotope.audioplugins.VST.Ozone6
/ Library/Audio/Plug-Ins/VST/iZotope RX 5 Connect.vst
-com.izotope.audioplugins.VST.RX5Connect
/ Library/Audio/Plug-Ins/VST/iZotope RX 5-click.vst
-com.izotope.audioplugins.VST.RX5Declicker
/ Library/Audio/Plug-Ins/VST/iZotope RX 5-clip.vst
-com.izotope.audioplugins.VST.RX5Declipper
/ Library/Audio/Plug-Ins/VST/iZotope RX 5-crackle.vst
-com.izotope.audioplugins.VST.RX5Decrackler
/ Library/Audio/Plug-Ins/VST/iZotope RX 5-UM .vst
-com.izotope.audioplugins.VST.RX5HumRemoval
/ Library/Audio/Plug-Ins/VST/iZotope RX 5-noise.vst
-com.izotope.audioplugins.VST.RX5Denoiser
/ Library/Audio/Plug-Ins/VST/iZotope RX 5-reverb.vst
-com.izotope.audioplugins.VST.RX5Dereverb
/ Library/Audio/Plug-Ins/VST/iZotope RX 5 Dialogue-noise.vst
-com.izotope.audioplugins.VST.RX5DlgDenoiser
/ Library/Audio/Plug-Ins/VST/iZotope RX 5 Monitor.vst
-com.izotope.audioplugins.VST.RX5Monitor
/ Library/Audio/Plug-Ins/VST3/iZotope Insight.vst3
-com.izotope.audioplugins.VST.Insight
/ Library/Audio/Plug-Ins/VST3/iZotope meter Tap.vst3
S/O
/ Library/Audio/Plug-Ins/VST3/iZotope Ozone 6 dynamic EQ.vst3
-com.izotope.audioplugins.VST.Ozone6DYNEQ
/ Library/Audio/Plug-Ins/VST3/iZotope Ozone 6 Dynamics.vst3
-com.izotope.audioplugins.VST.Ozone6DYN
/ Library/Audio/Plug-Ins/VST3/iZotope Ozone 6 Equalizer.vst3
-com.izotope.audioplugins.VST.Ozone6EQ
/ Library/Audio/Plug-Ins/VST3/iZotope Ozone 6 Exciter.vst3
-com.izotope.audioplugins.VST.Ozone6EXC
/ Library/Audio/Plug-Ins/VST3/iZotope Ozone 6 Imager.vst3
-com.izotope.audioplugins.VST.Ozone6IMG
/ Library/Audio/Plug-Ins/VST3/iZotope Ozone 6 Maximizer.vst3
-com.izotope.audioplugins.VST.Ozone6MAX
/ Library/Audio/Plug-Ins/VST3/iZotope Ozone 6.vst3
-com.izotope.audioplugins.VST.Ozone6
/ Library/Audio/Plug-Ins/VST3/iZotope RX 5 Connect.vst3
-com.izotope.audioplugins.VST.RX5Connect
/ Library/Audio/Plug-Ins/VST3/iZotope RX 5-click.vst3
-com.izotope.audioplugins.VST.RX5Declicker
/ Library/Audio/Plug-Ins/VST3/iZotope RX 5-clip.vst3
-com.izotope.audioplugins.VST.RX5Declipper
/ Library/Audio/Plug-Ins/VST3/iZotope RX 5-crackle.vst3
-com.izotope.audioplugins.VST.RX5Decrackler
/ Library/Audio/Plug-Ins/VST3/iZotope RX 5-UM .vst3
-com.izotope.audioplugins.VST.RX5HumRemoval
/ Library/Audio/Plug-Ins/VST3/iZotope RX 5-noise.vst3
-com.izotope.audioplugins.VST.RX5Denoiser
/ Library/Audio/Plug-Ins/VST3/iZotope RX 5-reverb.vst3
-com.izotope.audioplugins.VST.RX5Dereverb
/ Library/Audio/Plug-Ins/VST3/iZotope RX 5 Dialogue-noise.vst3
-com.izotope.audioplugins.VST.RX5DlgDenoiser
/ Library/Audio/Plug-Ins/VST3/iZotope RX 5 Monitor.vst3
-com.izotope.audioplugins.VST.RX5Monitor
/Library/components/FLACAudioCodec.component
-com.mycompany.myformat
/Library/components/FLACAudioFileComponent.component
-com.Acme.audio.files.Components
/Library/Extensions/Apowersoft_AudioDevice.kext
-com Apowersoft.driver.AudioDevice
/Library/Extensions/FocusritePCIe.kext
-com.focusrite.driver.FocusritePCIe
/Library/Extensions/NIUSBAudioDriver.kext
-com.caiaq.driver.NIUSBHardwareDriver
/Library/Extensions/NIUSBGuitarRigMobile.kext
-com.caiaq.driver.NIUSBGuitarRigMobileDriver
/ / Library/Internet Plug-Ins/AdobeAAMDetect.plugin
-com AdobeAAMDetectLib.AdobeAAMDetect
/ / Library/Internet Plug-Ins/AdobePDFViewer.plugin
-com.adobe.acrobat.pdfviewer
/ / Library/Internet Plug-Ins/AdobePDFViewerNPAPI.plugin
-com.adobe.acrobat.pdfviewerNPAPI
/ / Library/Internet Plug-Ins/JavaAppletPlugin.plugin
-com.apple.java.JavaAppletPlugin
/ / Library/Internet Plug-Ins/SharePointBrowserPlugin.plugin
-com.microsoft.sharepoint.browserplugin
/ / Library/Internet Plug-Ins/SharePointWebKitPlugin.webplugin
-com.microsoft.sharepoint.webkitplugin
/ / Library/Internet Plug-Ins/Silverlight.plugin
-com.microsoft.SilverlightPlugin
/ Library/PreferencePanes/CUDA Preferences.prefPane
-com.nvidia.CUDAPref
/Library/PreferencePanes/EyeConnect.prefPane
-com.elgato.preference.EyeConnect
/Library/PreferencePanes/MacFUSE.prefPane
-com.google.MacFUSE
/Library/PreferencePanes/NIUSBAudio.prefPane
-com.caiaq.NIUSBAudioPreferencePane
/Library/PreferencePanes/NTFS-3G.prefPane
-org.catacombae.macntfs - 3 g .prefpane
/Library/PreferencePanes/NTFSforMacOSX.prefPane
-com.paragon - software.filesystems.ntfs.prefpanel
/ Library/PreferencePanes/NVIDIA Driver Manager.prefPane
-com.nvidia.nvprefpane
/Library/PreferencePanes/OSXFUSE.prefPane
-com.github.osxfuse.OSXFUSEPrefPane
/ Library/ScriptingAdditions/Adobe unit Types.osax
S/O
Library/Audio/Plug-Ins/VST/AU/iZInsightAUHook.component
-com.izotope.audioplugins.AU.Insight
Library/Audio/Plug-Ins/VST/AU/iZRX5ConnectAUHook.component
-com.izotope.audioplugins.AU.RX5Connect
Library/Audio/Plug-Ins/VST/AU/iZRX5DeclickerAUHook.component
-com.izotope.audioplugins.AU.RX5Declicker
Library/Audio/Plug-Ins/VST/AU/iZRX5DeclipperAUHook.component
-com.izotope.audioplugins.AU.RX5Declipper
Library/Audio/Plug-Ins/VST/AU/iZRX5DecracklerAUHook.component
-com.izotope.audioplugins.AU.RX5Decrackler
Library/Audio/Plug-Ins/VST/AU/iZRX5DenoiserAUHook.component
-com.izotope.audioplugins.AU.RX5Denoiser
Library/Audio/Plug-Ins/VST/AU/iZRX5DereverbAUHook.component
-com.izotope.audioplugins.AU.RX5Dereverb
Library/Audio/Plug-Ins/VST/AU/iZRX5DialogueDenoiserAUHook.component
-com.izotope.audioplugins.AU.RX5DlgDenoiser
Library/Audio/Plug-Ins/VST/AU/iZRX5HumRemovalAUHook.component
-com.izotope.audioplugins.AU.RX5HumRemoval
Library/Audio/Plug-Ins/VST/AU/iZRX5MonitorAUHook.component
-com.izotope.audioplugins.AU.RX5Monitor
Library/Audio/Plug-Ins/VST/iZotope RX 5 Audio Editor.app
-com.izotope.audioapps.rx5
Library/Audio/Plug-Ins/VST/RTAS/iZInsightPTHook.dpm
-com.izotope.audioplugins.PT.Insight
Library/Audio/Plug-Ins/VST/RTAS/iZRX5AmbienceMatchPTHook.dpm
-com.izotope.audioplugins.PT.RX5AmbienceMatch
Library/Audio/Plug-Ins/VST/RTAS/iZRX5ConnectPTHook.dpm
-com.izotope.audioplugins.PT.RX5Connect
Library/Audio/Plug-Ins/VST/RTAS/iZRX5DeclickerPTHook.dpm
-com.izotope.audioplugins.PT.RX5Declicker
Library/Audio/Plug-Ins/VST/RTAS/iZRX5DeclipperPTHook.dpm
-com.izotope.audioplugins.PT.RX5Declipper
Library/Audio/Plug-Ins/VST/RTAS/iZRX5DecracklerPTHook.dpm
-com.izotope.audioplugins.PT.RX5Decrackler
Library/Audio/Plug-Ins/VST/RTAS/iZRX5DenoiserPTHook.dpm
-com.izotope.audioplugins.PT.RX5Denoiser
Library/Audio/Plug-Ins/VST/RTAS/iZRX5DereverbPTHook.dpm
-com.izotope.audioplugins.PT.RX5Dereverb
Library/Audio/Plug-Ins/VST/RTAS/iZRX5DialogueDenoiserPTHook.dpm
-com.izotope.audioplugins.PT.RX5DlgDenoiser
Library/Audio/Plug-Ins/VST/RTAS/iZRX5HumRemovalPTHook.dpm
-com.izotope.audioplugins.PT.RX5HumRemoval
Library/Audio/Plug-Ins/VST/RTAS/iZRX5MonitorPTHook.dpm
-com.izotope.audioplugins.PT.RX5Monitor
Insight.vst Library/Audio/Plug-Ins/VST/VST/iZotope
-com.izotope.audioplugins.VST.Insight
RX Library/Audio/Plug-Ins/VST/VST/iZotope 5 Connect.vst
-com.izotope.audioplugins.VST.RX5Connect
RX Library/Audio/Plug-Ins/VST/VST/iZotope 5-click.vst
-com.izotope.audioplugins.VST.RX5Declicker
RX Library/Audio/Plug-Ins/VST/VST/iZotope 5-clip.vst
-com.izotope.audioplugins.VST.RX5Declipper
RX Library/Audio/Plug-Ins/VST/VST/iZotope 5-crackle.vst
-com.izotope.audioplugins.VST.RX5Decrackler
RX Library/Audio/Plug-Ins/VST/VST/iZotope 5-UM .vst
-com.izotope.audioplugins.VST.RX5HumRemoval
RX Library/Audio/Plug-Ins/VST/VST/iZotope 5-noise.vst
-com.izotope.audioplugins.VST.RX5Denoiser
RX Library/Audio/Plug-Ins/VST/VST/iZotope 5-reverb.vst
-com.izotope.audioplugins.VST.RX5Dereverb
RX Library/Audio/Plug-Ins/VST/VST/iZotope 5 Dialogue-noise.vst
-com.izotope.audioplugins.VST.RX5DlgDenoiser
RX Library/Audio/Plug-Ins/VST/VST/iZotope 5 Monitor.vst
-com.izotope.audioplugins.VST.RX5Monitor
Insight.vst3 Library/Audio/Plug-Ins/VST/VST3/iZotope
-com.izotope.audioplugins.VST.Insight
RX Library/Audio/Plug-Ins/VST/VST3/iZotope 5 Connect.vst3
-com.izotope.audioplugins.VST.RX5Connect
RX Library/Audio/Plug-Ins/VST/VST3/iZotope 5-click.vst3
-com.izotope.audioplugins.VST.RX5Declicker
RX Library/Audio/Plug-Ins/VST/VST3/iZotope 5-clip.vst3
-com.izotope.audioplugins.VST.RX5Declipper
RX Library/Audio/Plug-Ins/VST/VST3/iZotope 5-crackle.vst3
-com.izotope.audioplugins.VST.RX5Decrackler
RX Library/Audio/Plug-Ins/VST/VST3/iZotope 5-UM .vst3
-com.izotope.audioplugins.VST.RX5HumRemoval
RX Library/Audio/Plug-Ins/VST/VST3/iZotope 5-noise.vst3
-com.izotope.audioplugins.VST.RX5Denoiser
RX Library/Audio/Plug-Ins/VST/VST3/iZotope 5-reverb.vst3
-com.izotope.audioplugins.VST.RX5Dereverb
RX Library/Audio/Plug-Ins/VST/VST3/iZotope 5 Dialogue-noise.vst3
-com.izotope.audioplugins.VST.RX5DlgDenoiser
RX Library/Audio/Plug-Ins/VST/VST3/iZotope 5 Monitor.vst3
-com.izotope.audioplugins.VST.RX5Monitor
Library/Caches/com.apple.Safari/Extensions/AdBlock-2.safariextension
-com.betafish.adblockforsafari
Library/Caches/com.apple.Safari/Extensions/Auto Refresh.safariextension
-com.agriffindesign.autorefresh
Library/Caches/com.apple.Safari/Extensions/Hide & 2.safariextension - search
-net.roopc.hideandseekformac
Library/Caches/com.apple.Safari/Extensions/IncognIt VPN Switcher.safariextension
-com.incogniteam.safari.switcher
Library/Caches/com.apple.Safari/Extensions/YoutubeWide.safariextension
-com.pedrocc.youtubewide
Library/Services/ToastIt.service
-com.roxio.ToastItService
dylibs
/usr/lib/libUFSDNTFS.dylib
Content of/etc/hosts (UTF-8 Unicode English text)
127.0.0.1 localhost
255.255.255.255 broadcasthost
: 1 localhost
FE80::1% lo0 localhost
0.0.0.0 www.rogueamoeba.com
127.0.0.1 www.rogueamoeba.com
127.0.0.1 www.adobe.com
127.0.0.1 hl2rcv.adobe.com
127.0.0.1 t3dns.adobe.com
127.0.0.1 3dns - 1.adobe.com
127.0.0.1 3dns - 2.adobe.com
127.0.0.1 3dns - 3.adobe.com
127.0.0.1 3dns - 4.adobe.com
127.0.0.1 activate.adobe.com
127.0.0.1 activate - sea.adobe.com
127.0.0.1 activate - sjc0.adobe.com
127.0.0.1 activate.wip.adobe.com
127.0.0.1 activate.wip1.adobe.com
127.0.0.1 activate.wip2.adobe.com
127.0.0.1 activate.wip3.adobe.com
127.0.0.1 activate.wip4.adobe.com
127.0.0.1 adobe - dns.adobe.com
127.0.0.1 adobe-dns - 1.adobe.com
127.0.0.1 adobe-dns - 2.adobe.com
127.0.0.1 adobe-dns - 3.adobe.com
.. .and 63 more line (s)
Content of /etc/pf.conf
scrub-anchor "com.apple / * '.
NAT-anchor "com.apple / * '.
RDR-anchor "com.apple / * '.
dummynet-anchor "com.apple / * '.
Anchor "com.apple / * '.
load the "com.apple" anchor of "/ etc/pf.anchors/com.apple".
Content of/etc/syslog.conf
install.* @127.0.0.1:32376
Content of /etc/pam.d/authorization
Pam_krb5.so AUTH optional use_kcminit use_first_pass
AUTH pam_ntlm.so optional use_first_pass
AUTH required pam_opendirectory.so use_first_pass nullok
account required pam_opendirectory.so
Content of /etc/pam.d/checkpw
AUTH required pam_opendirectory.so use_first_pass nullok
account required pam_opendirectory.so no_check_home no_check_shell
Content of /etc/pam.d/chkpasswd
AUTH required pam_opendirectory.so
account required pam_opendirectory.so
password required pam_permit.so
session required pam_permit.so
Content of /etc/pam.d/cups
AUTH required pam_opendirectory.so
account required pam_permit.so
password required pam_deny.so
session required pam_permit.so
Content of /etc/pam.d/ftpd
AUTH required pam_opendirectory.so
account required pam_permit.so
password required pam_deny.so
session required pam_permit.so
Contents of /etc/pam.d/login
Pam_krb5.so AUTH optional use_kcminit
AUTH pam_ntlm.so optional try_first_pass
AUTH pam_mount.so optional try_first_pass
AUTH required pam_opendirectory.so try_first_pass
account required pam_nologin.so
account required pam_opendirectory.so
pam_opendirectory.so password required
session required pam_launchd.so
session required pam_uwtmp.so
session pam_mount.so in option
Content of /etc/pam.d/login.term
account required pam_nologin.so
account required pam_opendirectory.so
session required pam_uwtmp.so
Content of /etc/pam.d/other
AUTH required pam_deny.so
pam_deny.so account required
password required pam_deny.so
session required pam_deny.so
Content of /etc/pam.d/passwd
AUTH required pam_permit.so
account required pam_opendirectory.so
pam_opendirectory.so password required
session required pam_permit.so
Content of /etc/pam.d/rshd
AUTH required pam_permit.so
account required pam_nologin.so
account required pam_opendirectory.so
session required pam_launchd.so
Content of /etc/pam.d/screensaver
Pam_krb5.so AUTH optional use_kcminit use_first_pass
AUTH required pam_opendirectory.so use_first_pass nullok
account required pam_opendirectory.so
account sufficient pam_self.so
Group accounts required pam_group.so no_warn = admin, wheel fail_safe
account required pam_group.so no_warn deny group = admin, wheel ruser fail_safe
Content of /etc/pam.d/smbd
account of the sacl_service pam_sacl.so = allow_trustacct smb
session required pam_permit.so
Content of /etc/pam.d/sshd
Pam_krb5.so AUTH optional use_kcminit
AUTH pam_ntlm.so optional try_first_pass
AUTH pam_mount.so optional try_first_pass
AUTH required pam_opendirectory.so try_first_pass
account required pam_nologin.so
account of the sacl_service pam_sacl.so = ssh
account required pam_opendirectory.so
pam_opendirectory.so password required
session required pam_launchd.so
session pam_mount.so in option
Content of /etc/pam.d/su
AUTH sufficient pam_rootok.so
AUTH required pam_opendirectory.so
Group accounts required pam_group.so no_warn = admin, wheel tweak root_only fail_safe
no_check_shell account required pam_opendirectory.so
pam_opendirectory.so password required
session required pam_launchd.so
Content of /etc/pam.d/sudo
AUTH required pam_opendirectory.so
account required pam_permit.so
password required pam_deny.so
session required pam_permit.so
Content of /etc/periodic/daily/110.clean-tmps
If [r - etc/defaults/periodic.conf]
then
. /etc/defaults/periodic.conf
source_periodic_confs
FI
case '$daily_clean_tmps_enable' in
[AA] [Ee] [Ss])
If [-z "$daily_clean_tmps_days"]
then
echo ' $daily_clean_tmps_enable is defined, but '.
"$daily_clean_tmps_days is not.
RC = 2
on the other
ECHO «»
echo "deleting old temporary files:
Set f noglob
args = ""-atime $daily_clean_tmps_days - mtime + $daily_clean_tmps_days ""
args = "${args} - ctime + $daily_clean_tmps_days.
dargs = "- empty - mtime + $daily_clean_tmps_days"
dargs = "${dargs}! "- name .vfs_rsrc_streams_."
[n "$daily_clean_tmps_ignore"] & & {}
args = "$args '" echo "${daily_clean_tmps_ignore %} ' |" ' "
sed / [] [] * / ! -name/g "
dargs = "$dargs '" echo "${daily_clean_tmps_ignore %} ' |" ' "
sed / [] [] * / ! -name/g "
.. .and 21 more line (s)
Content of /etc/periodic/daily/130.clean-msgs
If [r - etc/defaults/periodic.conf]
then
. /etc/defaults/periodic.conf
source_periodic_confs
FI
case '$daily_clean_msgs_enable' in
[AA] [Ee] [Ss])
If [! d/var/msgs]
then
echo ' $daily_clean_msgs_enable has the value but msgs/var / ' \.
"does not exist".
RC = 2
on the other
ECHO «»
echo "cleaning of the old ads system:
[n '$daily_clean_msgs_days'] & &
ARG =-${daily_clean_msgs_days #-} | ARG =
GSM-c $arg & & rc = 0 | RC = 3
FI;
*) rc = 0;
ESAC
output $rc
Content of /etc/periodic/daily/140.clean-rwho
If [r - etc/defaults/periodic.conf]
then
. /etc/defaults/periodic.conf
source_periodic_confs
FI
case '$daily_clean_rwho_enable' in
[AA] [Ee] [Ss])
If [-z "$daily_clean_rwho_days"]
then
echo ' $daily_clean_rwho_enable is activated but '.
"$daily_clean_rwho_days is not defined.
RC = 2
Elif [! d/var/rwho(1)]
then
echo "$daily_clean_rwho_enable is enabled but/var/rwho(1)."------
"does not exist".
RC = 2
on the other
ECHO «»
echo "deleting obsolete files in/var/rwho(1):
case '$daily_clean_rwho_verbose' in
[AA] [Ee] [Ss])
print = -.
*)
print =;
.. .and 14 more line (s)
Content of /etc/periodic/daily/199.clean-fax
If [r - etc/defaults/periodic.conf]
then
. /etc/defaults/periodic.conf
source_periodic_confs
FI
If [/ var/spool/fax - d]; then
ECHO «»
echo "deleting files fax scratch."
CD/var/spool/fax & & \
To find. -type f-name ' [0-9] *. [0-9] [0-9] [0-9] "- mtime + 7 - delete > / dev/null 2 > & 1;"
FI
Content of /etc/periodic/daily/310.accounting
If [r - etc/defaults/periodic.conf]
then
. /etc/defaults/periodic.conf
source_periodic_confs
FI
case '$daily_accounting_enable' in
[AA] [Ee] [Ss])
If [!] ACCT - f]
then
echo '$daily_accounting_enable has the value but ACCT '.
"does not exist".
RC = 2
Elif [-z "$daily_accounting_save"]
then
echo ' $daily_accounting_enable is defined, but '.
"$daily_accounting_save is not.
RC = 2
on the other
ECHO «»
echo "accounting log rotation and collection of statistics:
CD/var/account
RC = 0
n = $daily_accounting_save
RM f ACCT. $ ACCT n.gz. $n || RC = 3
m = $n
.. .and 18 several line (s)
Content of /etc/periodic/daily/400.status-disks
If [r - etc/defaults/periodic.conf]
then
. /etc/defaults/periodic.conf
source_periodic_confs
FI
case '$daily_status_disks_enable' in
[AA] [Ee] [Ss])
ECHO «»
echo "record status:
DF $daily_status_disks_df_flags & & rc = 1 | RC = 3
;;
*) rc = 0;
ESAC
output $rc
Content of /etc/periodic/daily/420.status-network
If [r - etc/defaults/periodic.conf]
then
. /etc/defaults/periodic.conf
source_periodic_confs
FI
case '$daily_status_network_enable' in
[AA] [Ee] [Ss])
ECHO «»
echo "State of the network interface:
case '$daily_status_network_usedns' in
[AA] [Ee] [Ss])
netstat-i & & rc = 0 | RC = 3;
*)
netstat - in & & rc = 0 | RC = 3;
ESAC;
*) rc = 0;
ESAC
output $rc
Content of /etc/periodic/daily/430.status-rwho
If [r - etc/defaults/periodic.conf]
then
. /etc/defaults/periodic.conf
source_periodic_confs
FI
case '$daily_status_rwho_enable' in
[AA] [Ee] [Ss])
RWHO(1) = $(echo/var/rwho / *)
If [f ' ${rwho(1) % *} "]
then
ECHO «»
echo "the system of Local network status:
PROG = ruptime
on the other
ECHO «»
echo "Local System State:
PROG = running time
FI
RC = $($prog | tee/dev/stderr | wc-l)
If [$?-eq 0]
then
[$rc - gt 1] & & rc = 1
on the other
RC = 3
FI;
.. .and 3 more lines
Content of /etc/periodic/daily/999.local
If [r - etc/defaults/periodic.conf]
then
. /etc/defaults/periodic.conf
source_periodic_confs
FI
RC = 0
script in $daily_local
do
echo "
case '$script' in
/*)
If [f "$script"]
then
echo "Running $script:
sh $script | RC = 3
on the other
echo "$script: no file.
[$rc - lt 2] & & CR = 2
FI;
*)
echo "$script: not an absolute path.
[$rc - lt 2] & & CR = 2;
ESAC
fact
output $rc
Content of /etc/periodic/monthly/199.rotate-fax
If [r - etc/defaults/periodic.conf]
then
. /etc/defaults/periodic.conf
source_periodic_confs
FI
ECHO «»
printf %s "rotation of the fax log files:
CD/var/log/fax
I'm in * .log; do
If [f ' ${i} "]; then
echo-n "$i".
If [x - / usr/bin/gzip]; then gzext = ".gz". else gzext =""; FI
If [f ' ${i} $.3 {gzext} "]; then mv-f "${i} $.3 {gzext}" "${i}.4$ {gzext}"; FI
If [f ' ${i} $.2 {gzext} "]; then mv-f "${i} $.2 {gzext}" "${i} $.3 {gzext}"; FI
If [f ' ${i}.1$ {gzext} "]; then mv-f "${i}.1$ {gzext}" "${i} $.2 {gzext}"; FI
If [f ' ${i}.0$ {gzext} "]; then mv-f "${i}.0$ {gzext}" "${i}.1$ {gzext}"; FI
If [f ' ${i} "]; then mv-f "${i}" "${i}.0" & & if [x - / usr/bin/gzip]; then gzip-9 "${i}.0. FI; FI
Touch "${i}" & & chmod 640 ' ${i} "& & chown root: admin" ${i} ".
FI
fact
ECHO «»
Content of /etc/periodic/monthly/200.accounting
If [r - etc/defaults/periodic.conf]
then
. /etc/defaults/periodic.conf
source_periodic_confs
FI
oldmask = $(umask)
umask 066
case '$monthly_accounting_enable' in
[AA] [Ee] [Ss])
W = / var/log/wtmp
RC = 0
Remove = NO
If [$rc - eq 0]
then
ECHO «»
echo "doing the accounting of connection:
RC = $(ac-p |) Sort - nr k 2 | Tee/dev/stderr. WC - l)
[$rc - gt 0] & & rc = 1
FI
[$remove = YES] & & rm-f $W.0;
*) rc = 0;
ESAC
umask $oldmask
output $rc
Content of /etc/periodic/monthly/999.local
If [r - etc/defaults/periodic.conf]
then
. /etc/defaults/periodic.conf
source_periodic_confs
FI
RC = 0
script in $monthly_local
do
echo "
case '$script' in
/*)
If [f "$script"]
then
echo "Running $script:
sh $script | RC = 3
on the other
echo "$script: no file.
[$rc - lt 2] & & CR = 2
FI;
*)
echo "$script: not an absolute path.
[$rc - lt 2] & & CR = 2;
ESAC
fact
output $rc
Content of /etc/periodic/weekly/320.whatis
If [r - etc/defaults/periodic.conf]
then
. /etc/defaults/periodic.conf
source_periodic_confs
FI
case '$weekly_whatis_enable' in
[AA] [Ee] [Ss])
ECHO «»
echo "reconstruction whatis database:
MANPATH ='/ usr/bin/manpath - q'
If [$? = 0]
then
If [-z "${MANPATH}"]
then
echo "manpath impossible to find directories manpage.
RC = 3
on the other
RC = 0
/usr/libexec/makewhatis.local "${MANPATH}" | RC = 3
If [X "${man_locales}"! = X]
then
I'm in ${man_locales}
do
LC_ALL = $i /usr/libexec/makewhatis.local - a------.
-L "${MANPATH}" | RC = 3
.. .and 9 more line (s)
Content of /etc/periodic/weekly/999.local
If [r - etc/defaults/periodic.conf]
then
. /etc/defaults/periodic.conf
source_periodic_confs
FI
RC = 0
script in $weekly_local
do
echo "
case '$script' in
/*)
If [f "$script"]
then
echo "Running $script:
sh $script | RC = 3
on the other
echo "$script: no file.
[$rc - lt 2] & & CR = 2
FI;
*)
echo "$script: not an absolute path.
[$rc - lt 2] & & CR = 2;
ESAC
fact
output $rc
Contents of the /Library/Preferences/com.apple.security.appsandbox.plist (text of XML document)
<? XML version = "1.0" encoding = "UTF-8"? >
<! DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0 / / IN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd" > ""
< plist version = "1.0" >
< dict >
< key > UnrestrictSpotlightContainerScope < / key >
< true / >
< / dict >
< / plist >
Contents of the /Library/Preferences/SystemConfiguration/com.apple.Boot.plist (text of XML document)
<? XML version = "1.0" encoding = "UTF-8"? >
<! DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0 / / IN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd" > ""
< plist version = "1.0" >
< dict >
Flags kernel < key > < / key >
< string > < / string >
< / dict >
< / plist >
Problems of fonts: 57
Listeners
launchd: afpovertcp
launchd: afpovertcp
launchd: microsoft-ds
launchd: microsoft-ds
KDC: kerberos
Safari extensions
AdBlock
Auto Refresh
Hide & Seek
IncognIt VPN switch
YoutubeWide
Restricted file: 706
Senior leaders
Office: 255
Time elapsed (s): 246
Hi dedidude,
Thank you for using communities Support from Apple. I know it's important to be able to use iTunes to access your media, so I'm happy to provide advice to connect to the iTunes Store again.
To resolve this, see the steps that we have in our articles here:
If you cannot connect to the iTunes Store
Advanced steps for fixing problems with the iTunes Store connection
Have a great rest of your day, cheers!
-
"Windows backup failed trying to read from shadow copy on one of the volumes to back up.
I get the message "Windows backup failed while trying to read shadow copy on one of the volumes to back up" what backup operation is performed. I changed a few files backup and deleted files on the backup drive and think that this is related to the problem. I need to know how to recreate the "cliché".
Now, even if Essentials said it removed, I still see this file in the directory, so I removed it manually. I have not tried to restart the backup with Essentials, but can pretty much guess that it will work. Otherwise, it must at least point people in the right direction on how to fix this problem permanently.
RB
I found that... \AppData\LocalLow\Sun\Java\Deployment\cache\6.0... folder persisted with content even after you have used the "Java 7 Update 1 (build 1.7.0_01 - b08)" Control Panel-> General-> Temporary Internet Files-> settings...-> delete files... button with all the options checked. Therefore, for users who have updated to Java 7, it may be necessary to maually delete the cache folder Java 6.
-
I turned on the aaa command authorization without applying the correct user privileges. I can now log on this user, but the ASA 5510 displays an error:
============================
EUKFW2 # show running-config
^
% ERROR: invalid input detected at ' ^' marker.
ERROR: Failed authorization control
============================
I'm unable to change the configuration of the firewall. Is there any default user through which I can connect and disable the authorization of aaa? If this is not the case, how can I solve this problem?
Please visit this link
http://www.ciscotaccc.com/Kaidara-Advisor/security/showcase?case=K10386224
Please evaluate the useful messages
Kind regards
~ JG
-
ACS command 4.1 authorization failing intermittently
Hello
I have installation switches aaa using Ganymede + on the network, however I seem to get occasional command authorization error. It shows when I try entering the command on multiple ports at the same time (example interface range giga 1/1-48). If I had to do on one lane instead, I does not seem to encounter the error. It would be because of the ACS, unable to carry the load? It is only for a single switch to run the command for port ranges.
I've attached an example of the error of reference:
switch (config-if-range) #description level 3
% Failed authorization.% Command failed on the beach of the interface. Abandonment
I checked the interface to connect to the ACS, and I see no error. I'm not too sure of what may be the cause of error. Would it be because of the ACS unable to work well with the range of interface?
Thank you.
There is a bug open for this issue which is found in subsection 12.2 (46), and for the moment there is no plans how to solve the problem because it involves a design work in the code to fix this. The only work around is to remove permission to order or to see what your limit is on the beach inteface command entered begins to drop requests.
-
AAA Authorization % failed.
Even my credentials accepted in the CSA authorization failure, anyone has any idea what it could be?
(Unauthorized use is not permitted)
username: tparrilha
password:
% Failed authorization.
Debug aaa journals
* 2 May 09:48:30.840: AAA/AUTHOR/EXEC (00000026): FAILED authorization
* 2 May 09:48:41.612: AAA/BIND (00000027): link i / f
* 09:48:41.612 2 may: AAA/AUTHENTIC/LOGIN (00000027): choose method list "by default".
* 09:48:45.440 2 may: AAA/AUTHOR (0x27): choose method list 'default' - FAIL
* 2 May 09:48:45.456: AAA/AUTHOR/EXEC (00000027): authorization FAILURE
AAA new-model
!
AAA server Ganymede group + Bainet
Server 172.20.244.10
!
AAA-authentication failure message ^ CCCC sorry the password is wrong ^ C
Group AAA authentication login default local Bainet
Group AAA authentication enable default Bainet allow none
AAA authorization config-commands
default AAA authorization exec Bainet local group
AAA authorization commands 1 default local group of Bainet
Group of controls 2 AAA authorization Bainet local default
Group of default controls 3 AAA authorization local Bainet
Group of 4 AAA authorization local Bainet orders default
Group of controls 5 AAA authorization Bainet local default
Group of 6 AAA authorization local Bainet orders default
Group of controls 7 AAA authorization Bainet local default
Group of orders 8 AAA authorization Bainet local default
Group of 9 AAA authorization local Bainet orders default
Group orders 10 AAA authorization Bainet local default
AAA authorization commands default 11 local group Bainet
AAA authorization commands 12 default local group of Bainet
AAA authorization commands 13 default local group of Bainet
AAA authorization commands by default 14 Bainet local group
AAA authorization commands by default 15 Bainet local group
AAA authorization Bainet configuration default group
AAA accounting send stop-record an authentication failure
failure to exec AAA accounting
action-type market / stop
Group of Bainet
!
default of 0 AAA accounting orders
action-type market / stop
Group of Bainet
!
by default the control 1 AAA accountant
action-type market / stop
Group of Bainet
!
by default the control 2 AAA accounting
action-type market / stop
Group of Bainet
!
by default the control of 3 Accountants of the AAA
action-type market / stop
Group of Bainet
!
by default the control of 4 Accountants of the AAA
action-type market / stop
Group of Bainet
!
by default of 5 Accountants of the AAA commands
action-type market / stop
Group of Bainet
!
by default of 6 AAA accounting orders
action-type market / stop
Group of Bainet
!
by default of 7 AAA accounting orders
action-type market / stop
Group of Bainet
!
by default of 8 AAA accounting orders
action-type market / stop
Group of Bainet
!
default commands 9 accounting AAA
action-type market / stop
Group of Bainet
!
failure to order 10 AAA accounting
action-type market / stop
Group of Bainet
!
by default of 11 AAA accounting orders
action-type market / stop
Group of Bainet
!
by default of orders 12 Accountants of the AAA
action-type market / stop
Group of Bainet
!
by default the control of 13 AAA accounting
action-type market / stop
Group of Bainet
!
by default of 14 AAA accounting orders
action-type market / stop
Group of Bainet
!
by default of 15 AAA accounting orders
action-type market / stop
Group of Bainet
!
by default, the AAA accounting network
action-type market / stop
Group of Bainet
!
default connection accounting AAA
action-type market / stop
Group of Bainet
!
default value of the AAA accounting system
action-type market / stop
Group of Bainet
Ganymede IP source interface FastEthernet0/0.1
RADIUS-server host 192.168.110.1 single-connection
RADIUS-server application made
RADIUS-server key 7 11485807161B4A0E0524282B6972
#show worm
RT-NAMIBE-NEBS version #show
Cisco IOS software, 2800 Software (C2800NM-ADVENTERPRISEK9_IVS_LI-M), Version 12.4 (24) T4, VERSION of the SOFTWARE (fc2)
Technical support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Last update Fri 03-seven.-10 05:39 by prod_rel_team
ROM: System Bootstrap, Version 12.4 (13r) T, RELEASE SOFTWARE (fc1)
RT-NAMIBE-NBE uptime is of 12 weeks, 5 days, 23 hours, 56 minutes
System to regain the power ROM
System image file is "flash: c2800nm-adventerprisek9_ivs_li - mz.124 - 24.T4.bin".
After the debug message * 2 May 09:48:45.440: AAA/AUTHOR (0x27): choose method list 'default' - FAIL* the control will be passed to GANYMEDE. We are not this newspaper, who didn't understand why it failed in the Ganymede authorization. Looking at your configuration, its clear that you expect then question the user only if password enable priv-lvl = 15 is not currently configured on ACS for the user/group.
Could also remove you single-connection from the below listed command and try again.
RADIUS-server host 192.168.110.1 single-connection
In case it does not work, send the full output of debugs depending on if possible.
Debug aaa authentication
Debug aaa approval
Debug RADIUS authentication
Debug permission Ganymede
Debug events Ganymede
Jatin kone
-Does the rate of useful messages-
-
SDK: COM class works in Acrobat, fails in Acrobat Reader
Hi all
I'm developing a plug-in for Acrobat and Reader. He works in Acrobat, and I activated successfully drive the API. The menu options are showing correctly, but when I try to use my COM class, I get an error.
For this test, I simply shows a screen about with single button. The class is registered correctly because it works in Acrobat. Here is a code snippet:
HRESULT hr = CoInitialize (NULL);
If (SUCCEEDED
{
DURING THE
IAboutPtr pIAbout (__uuidof (About));
I get a crash on the last line. He tries to define the pointer, but I get an Access Exception. The class is here and can be found (and works) when it is running in Acrobat. What is different in Reader that would cause this to fail?
Thank you
Mark
This seems to be the question of the month in the forum of the Acrobat SDK kit, even though the question is far from new: https://forums.adobe.com/community/acrobat/acrobat_sdk
-
Download failed for adobe reader windows 7
I tried to download Adobe Reader and happens to 51% and then States fail installation. I have the Windows 7 operating system. I followed the troubleshooting steps work provided by Adobe, however it still does not. Is there anything else I can try?
You can install manually if you follow all the steps in 7 DC Pro/Standard of Adobe Acrobat and Reader: Direct Download Links | ProDesignTools
If you have a problem from the download, you follow the 7 steps, or your browser does not accept cookies.
the most common problem is caused by failing to meticulously follow the steps 1, 2, and/or 3 (which adds a cookie to your system, allowing you to download the correct version of the adobe.com site).
failure to obtain this cookie translates into an error page displayed after clicking on a link on prodesigntools.com or initiates the download of an incorrect (e.g., current) version.
-
RAM preview will ignore the first second of reading suggestions?
RAM Preview skip the first second reading, in other words, reading the Preview 1 second after the beginning of the work area.
In the Preview Panel is not checked the box right now.
No matter where ICT is in the timeline panel or pointing to my workspace, the RAM Preview starts 1 second after the beginning of the work area. However, after the forecast plays through the first time it starts then where his supposed (beginning of the work area). It just started today and it makes me crazy. I am on a Macbook Pro mid2012, 2.6 GHz Intel Core i7, Yosemite, 2012 CC AE and AE CC2014 (both versions have this problem).
This bug was introduced by Mac OS x v10.10 (Yosemite). We have worked around this bug in the version of After Effects under development, which is targeted for release this spring.
Maybe you are looking for
-
HP mini 210 computer: System disable the code
turn off the system after 3 wrong password attempts CNF0270VS2 serial No. Disable # 62783407
-
dialogue of the main character cuts sometime in Assassin's Creed for pc
In the game, for those who have played, it's at the point when you're in Damascus instead of the Assassin's Guild and the noise of main character dialogue breaks at the start of the screen when you talk to the guys from pottery for the first time and
-
After you have reinstalled Windows XP, I can not install any service packs.
Could not load service packs windows xp I reloaded windows xp pro, and now I can't get service packs to load. With packages of sp, I can't get the flash drives, and so on. Any ideas out there?
-
How to call this method?
I wrote this method earlier, but I do not remember how to call it. Can someone help me? public class PostReview extends Thread { String _url = new String(); public void Submit(String _url) { ConnectionFactory connFact = new ConnectionFactory(); Conne
-
I keep trying to install CS3 Photoshop, Illustrator, InDesign pack. But it is not because of the "shared components" do not install.I tried to use the cleaning tool.I tried to turn off my security system.It still does not work.I looked in the Window