authorizing the computer with ID after authorization without ID?
I need to allow a computer with an ID after computer same authorizating without ID to transfer items to E-reader
Seems that the account where bought you this ebook and the associated to ADE are two different accounts due that you get this error.
You must communicate with the seller of the ebook and ask them to associate this ebook with a different id, maybe that associated with ADE.
Tags: Adobe
Similar Questions
-
Original title: user profile
My administrator user profile does not work properly, but I have a user profile that has activated the parental control that worked well for about a year and yesterday when this user logs on the desktop comes up, but after that the computer does not respond when that user tries to do anything. There are actually turns off the computer with the power button. I ran a virus scan and spyware scan in my user admin profile and he has not found anything. I don't know what to check.
Hello rhunter15,
There may be a program to interfere with Parental controls so that we can try a few things to see if we can determine the application or program that is causing problems.
First of all, we run System File Checker to see if you have a corrupt file system.
- Click Start
- Click on all programs
- Click Accessories, and then right-click on the command prompt.
- Select the Security tab and choose "Run as Administrator"
- Click on command prompt
- Type SFC/scannow.
It will scan and repair any damaged operating system files.
To determine if there is a program because of a conflict, we recommend that you perform a "clean boot" of the computer. A clean boot is designed to disable programs and services in the background as much as possible. This helps determine which service or program can be the cause of the problem. For more information about how to perform a clean boot for troubleshooting, click the number below to view the article in the Microsoft Knowledge Base.
KB 929135 - how to solve a problem of performaing a clean boot in Windows Vista.
http://support.Microsoft.com/kb/929135Once you have finished the clean boot, check again and see if you get the error of parental control.
If please post again and let us know if that helped pinpoint the problem or if you still need help.
Thank you
Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
I upgraded to a new computer with Yosemite, after have migrated my settings on. Adobe CS5.5 works very well except Dreamweaver CS 5.5, it says it cannot locate the menus.xml file and cannot rebuild from a backup. He suggested resettlement.
But when I try to reinstall, I get an error that says "Installer failed to initialize. Please download adobe support advisor to detect the problem.
Who produces the net problem of it being abandoned, and that brought me here. Help!
This is a duplicate thread.
DW CS5.5 and Yosemite [subject edited by Moderator]
Ultimately, the problem has been resolved by running the cleanup CC tools then by reinstalling the software.
Nancy O.
-
Vista goes to 50% CPU usage and connects the computer for hours after the beginning
Original title: Vista processor
Stupid Vista goes to 50% CPU usage and connects the computer for hours after the start. Cannot run anything with any request of CPU without getting bogged down and crashing. It is not windows defender, I suspend this service and the machine is ok for another 1/2 hour, them I'm up to 50% of the CPU. The idle process said Task Manager is > 90%, still indicates 50% CPU usage and the cooling fan looks like a 747 taking off. Should I just pull the machine and go for Linux, or what? Cannot run games or whatever it is, totally disgusted with vista of POS and microsoft can it Deep and do not get windows 7, it is probably worse. Is that all I can turn off to get the same performance than, say, windows 3.1? It would be preferable to the current situation. MSCKMA.
Hello
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out what files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3Hope these helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Computer BSOD'd 2 x today. The event log States:
The computer was restarted after a bugcheck. The bugcheck was: 0x00000001 (0 x 0000000000000000, 0 0000000000000001, 0x00000000742d2e09, 0xfffff8800aa00b60).
LEAPC_INDEX_MISMATCHERREUR (1)
This is an internal error in the kernel. The most common reason to see this
error checking is when a file system or a driver has several mismatched
visits to disable and re-enable the TTB. The data key item is the
Thread-> CombinedApcDisable field. It's two separate 16-bit
the SpecialApcDisable and the KernelApcDisable fields. A negative value
either indicates that a driver has disabled APC normal or special
(respectively) without reactivation; a positive value indicates that
a driver allowed normal or special APCS (respectively) too many times.
Arguments:
Arg1: 00000000742d2e09, address of function or worker system call
Arg2: 0000000000000000, thread-> ApcStateIndex
Arg3: 0000000000000001 (thread-> SpecialApcDisable < 16)="" |="" thread-=""> KernelApcDisable)
Arg4: fffff8800aa00b60, call type (system call 0-, 1 - routine worker)Debugging information:
------------------TRIAGER: Could not open the file of triage: e:\dump_analysis\program\triage\modclass.ini, error 2
FAULTING_IP:
+ 0
00000000' 742d2e09? ???DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
BUGCHECK_STR: 0X1
Nom_processus: ccSvcHst.exe
CURRENT_IRQL: 0
LAST_CONTROL_TRANSFER: from fffff800032841a9 to fffff80003284c00
STACK_TEXT:
fffff880 '0aa00928 fffff800' 032841a 9: 00000000'00000001 00000000' 742d2e09 00000000'00000000 00000000'00000001: nt! KeBugCheckEx
fffff880 '0aa00930 fffff800' 032840e0: 00000000'00001 c 48 00000000' 0780e0a8 00000000' 0780e970 00000980'00000018: nt! KiBugCheckDispatch + 0 x 69
fffff880 '0aa00a70 00000000' 742d2e09: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: nt! KiSystemServiceExit + 0 x 245
00000000' 0780e9b8 00000000'00000000: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: 0x742d2e09STACK_COMMAND: kb
FOLLOWUP_IP:
NT! KiSystemServiceExit + 245
fffff800'032840e0 4883ec50 sub rsp, 50 hSYMBOL_STACK_INDEX: 2
SYMBOL_NAME: nt! KiSystemServiceExit + 245
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: nt
Nom_image: ntkrnlmp.exe
DEBUG_FLR_IMAGE_TIMESTAMP: 5684191c
FAILURE_BUCKET_ID: X64_0x1_SysCallNum_4_nt! KiSystemServiceExit + 245
BUCKET_ID: X64_0x1_SysCallNum_4_nt! KiSystemServiceExit + 245
These accidents were related to the corruption of memory (probably caused by a driver).If you are overclocking anything reset by default before running these tests.In other words STOP! If you don't know what it means that you're probably not
1-Driver Verifier (for full instructions, see our wiki here)
2-Memtest. (You can learn more about running memtest here)Former pilot who need update
dne64x.sys (Cisco VPN driver since 2008)
If you continue to plant I remove Symantec and using MSE instead
Symantec is a common cause of BSOD.
I remove and replace it with Microsoft Security if you are using Windows 7 and if you win 8 or higher, use the built-in Defender.
http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20080710133834ENUse it to Norton 360 http://Symantec.pcperformancetools.com/Norton-360-how-to-uninstall.html -
The computer was restarted after a bugcheck. The bugcheck was: 0 x 00000116
Hello
I recently got a new PC, initially, I installed the Windows 10 and it worked quite well apart from crashing just by playing a game. Thought that accidents were due to Windows 10 I uninstalled Windows 7 from my old office and installed on the new desktop.
Same problem with Windows 7, if I play Tera Online at some point which seems to be random, the system hangs, I get a black screen and press the power button for four seconds for the computer to shut down properly because it is not responding to something else.
Interesting to note that other games (like Batman Arkham Knight) will work perfectly.
The error that appears in the Windows Event Viewer is:
The computer was restarted after a bugcheck. The bugcheck was: 0 x 00000116 (0xfffff880060f9128, 0xffffffffc000009a, 0xfffffa800710f4e0, 0 x 0000000000000004). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 071415-8174-01.
Thank you for the help, I used the Debugging Tools for Windows to read my memory dump that led me to believe the error is caused by nvlddmkm.sys which seems to be among the NVIDIA drivers. This track seems to me the solution because I need to underclock my graphics card. This seems to have solved the problem, so I'll try to find a solution in other ways that the Microsoft Community as sounds more like a problem of material or at least a NVIDIA issue.
-
The computer was restarted after a bugcheck.
I get the following BSOD and error message resulting approximately every 10 days. It seems more prevalent when I try to play a video from the browser, but it happened when I am just browsing the internet.
The computer was restarted after a bugcheck. The bugcheck was: 0 x 00000116 (0xfffffa80080be380, 0 x 0000000000000002, 0xfffff88003c92aec, 0 x 0000000000000000). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 020715-40185-01.
You can download a zip file containing all my files current mini dump from here:
https://onedrive.live.com/redir?RESID=6CBE36721A006FAF! 110 & authkey =! AMEI8sjZRhqgkT4 & ithint = the file % 2czip
Any help would be appreciated.
Thank you
Bill
Bill
These accidents are called BCC116 and are associated with your video subsystem. Please follow the instructions of this wiki
-
The beginning of this month, I have built me a new platform game and installed Win 7 HP. everything worked very well at 18. I was just browsing the internet, and all of a sudden my computer froze for a second, then went to the BSOD. Inside, I saw that it was a "memory dump". He did 3 times the same day where I just internet browsing. Upset A, looked autour online and I've seen where people have said that it could be caused due to the update software. So I updated what he needed and then with my day. Well, it happened earlier this morning. I decided to look in my event viewer and see if I could find what is the problem. I found a mistake:
The computer was restarted after a bugcheck. The bugcheck was: 0x0000003b (0xfffff880113022ec, 0xfffff88008266950, 0x00000000c0000005, 0 x 0000000000000000). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 072414-16614-01.
So I decided to call Microsoft and their solution to the problem was "reinstall Windows! Reinstall Windows! "WHAT! REINSTALL WINDOWS! It will take me 2 DAYS to get my computer to the way I want it with all my programs, movies, music. I know that there is another solution to this problem. I want to know the cause of the BSOD. So I was reading around and I've seen where people would say upload the file to dump memory to Skydrive and someone will look into it to find a problem. Well, I downloaded the .dmp file to my Onedrive and I hope and pray someone can read and help. (https://onedrive.live.com/redir?resid=E4B0911EE97A02C1 107 & authkey =!) AAR8h7CfZxBp7aw & ithint = the file % 2cdmp) I initially thought it was a problem of RAM because he said that it was a picture of 'memory '.
Help, please.
Thank you!
Original title: Blue Screen of Death on the new computer. Help, please
Update of these older drivers may help.
Update Corsair Link the software to version 2.6.5214 Installer
http://www.Corsair.com/en-us/support/downloadsBELKIN F7D4101 Play Wireless USB Adapter firmware update
-
Hello Microsoft,
Nice day!
Laptop to our head of service stops automatically. I checked with the other posts, some are the same, but can't find the bug error we encounter. Please check the below error code
The computer was restarted after a bugcheck. The bugcheck was: 0x000000d1 (0 x 0000000000000002, 0 x 0000000000000001, 0 x 0000000000000018, 0xfffff88005254d16). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 23025-071714-01.
Event ID: 1001
The dump file is shared on SkyDrive. The URL is
https://onedrive.live.com/redir?RESID=A21E1CFD1B8F0B96%211092
Thank you very much!
Kind regards
Sidney Mendoza
Hi Sidney,
The attached file of the DMP is to bug checking DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1) .
This indicates that a kernel-mode driver attempted to access pageable memory with a high IRQL.
A driver tried to access a pageable (or that is completely invalid) address while the IRQL was too high. This bug check is usually caused by drivers who used a wrong address.
BugCheck D1, {18, 2, 1, fffff88005254d16}
Argument 1 is 0000000000000018 indicating completely invalid memory was referenced. We don't even need check, we can tell just by looking at her that he isn't a valid address in any way.
3: kd > k
Call child-SP RetAddr site
fffff880'031fd608 fffff800'034 d 7169 nt! KeBugCheckEx
fffff880 '031fd610 fffff800' 034d5de0 nt! KiBugCheckDispatch + 0 x 69
fffff880'031fd750 fffff880'05254 d 16 nt! KiPageFault + 0 x 260
fffff880'031fd8e0 fffff880'05257722 athrx + 0x18d16
fffff880 '031fd930 fffff880' 05256cac of the athrx + 0x1b722
fffff880 '031fd9c0 fffff880' 052ddb8b of the athrx + 0x1acac
fffff880 '031fda00 fffff880' 052e4d61 of the athrx + 0xa1b8b
fffff880 '031fda30 fffff880' 052634 to 7 the athrx + 0xa8d61
fffff880 '031fda90 fffff880' 0523d9fa of the athrx + 0x274a7
fffff880 '031fdac0 fffff880' 016ae9b6 of the athrx + 0x19fa
fffff880 '031fdb00 fffff800' 034e230c ndis! ndisInterruptDpc + 0x1b6
fffff880 '031fdb90 fffff800' 034cf8ca nt! KiRetireDpcList + 0x1bc
fffff880'031fdc40 00000000 00000000' nt! KiIdleLoop + 0x5aWe can see the pilot who attempted to access invalid memory was athrx.sys , which is the Atheros network card driver.
3: kd > .trap fffff880'031fd750
NOTE: The frame trap does contain not all registers.
Some registry values can be set to zero or incorrect.
rbx Rax = 0000000000000000 = 0000000000000000 rcx = fffffa8006a01030
RDX = fffffa8006be3440 rsi = 0000000000000000 rdi = 0000000000000000
RIP = fffff88005254d16 rsp = fffff880031fd8e0 rbp = 0000000000000000
R8 = 0000000000013601 r9 = 0000000000000000 r10 = fffff80003462000
R11 = 0000000000000000 r12 = 0000000000000000 r13 = 0000000000000000
R14 = 0000000000000000 r15 = 0000000000000000
iopl = 0 nv up ei ng nz na po nc
athrx + 0x18d16:
fffff880'd 05254 16 c7401800000000 mov dword ptr [rax + 18 h], 0'00000018 ds:00000000 is?We can see on the statement, we do not have, we didn't move a pointer in the rax register. Rax sucks because of all the x 64 non volatile registers are regarded as garbage, as well as their context is not registered in the hotpath kernel.
----------------------------
1. make sure that all the network drivers (especially Atheros) are up-to-date.
2 remove and reinstall McAfee with Microsoft Security Essentials for purposes of troubleshooting temporary, as it may very well cause conflicts NETBIOS:
Removal of McAfee- http://service.McAfee.com/FAQDocument.aspx?ID=TS101331
MSE- http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-download
Kind regards
Patrick
-
HELP PLEASE! The computer was restarted after a bugcheck.
I was hoping that someone could help me understand what is the cause. This has happened for the past 2 days on one of our servers. The server is a Windows Server 2008 R2 computer.
That's the message in the event viewer:
The computer was restarted after a bugcheck. The bugcheck was: 0 x 00000050 (0 x 0000000000000001, 0xfffff800016d40cc, 0xffffffffffffffd0, 0 x 0000000000000000). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 030313-9156-01.
This is the message that is displayed on windows re-opening after the accident:
Signature of the problem:
Problem event name: BlueScreen
OS version: 6.1.7601.2.1.0.272.7
Locale ID: 1033More information about the problem:
BCCode: 50
BCP1: FFFFFFFFFFFFFFD0
BCP2: 0000000000000001
BCP3: FFFFF800016DE0CC
BCP4: 0000000000000000
OS version: 6_1_7601
Service Pack: 1_0
Product: 272_3Files helping to describe the problem:
C:\Windows\Minidump\030413-8765-01.dmp
C:\Temp\WER-83783546-0.SysData.XMLHello
Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or cannot start Windows.
http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7For BlueScreen troubleshooting methods using BlueScreenView and MyEventViewer see my
answers if this thread - top 3 RESPONSES (+ 1 other).We can analyze the minidumps if make you it available to the SkyDrive or another file
sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
for the office or in the Documents folder and download them from there.ZIP or download the content of the C:\Windows\minidump
Use SkyDrive to upload collected files
http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65--------------------------------------------------------------------------------------------------
BCCode: 50 0 x 00000050
References to Vista also apply to Windows 7.
Have you recently added any hardware? Have you updated a driver just before
These began? (Check control panel - updates of Windows to see if all drivers
have been updated it there all the time, it started) main likely culprits are video
pilot, other great drivers, memory and antivirus/antispyware/security products
could be faulty as well as reader questions.Use the troubleshooter below and refer to the following message for pilots and
memory when you get these sections and then return of the disease.
game needed.BCCode: 50 0 x 00000050
Bug Check 0 x 50: PAGE_FAULT_IN_NONPAGED_AREA
Important info if you received a STOP Code
If you received a blue error screen, or a stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you have purchased
Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.
These actions could prevent a mistake like this does not happen:
- Download and install updates for your computer from Windows Update device drivers.
- Scan your computer for computer viruses.
- Check your hard drive for errors.
PAGE_FAULT_IN_NONPAGED_AREA parameters
The following settings are displayed on the blue screen.
Parameter Description 1
The referenced memory address
2
0: Read operation
1: Write operation
3
Address that referenced memory (if known)
4
Reserved
If the driver responsible for the error can be identified, its name is printed on the blue screen and stored in memory location (PUNICODE_STRING) KiBugCheckDriver.
Cause
Another common cause is a defective system service installation.
Antivirus software can also trigger this error, as can a corrupted NTFS volume.
Resolution
Fix a defective hardware problem: if the material has been added to the system recently, remove it to see if the error recurs. If the hardware failure existing, remove or replace the faulty component. You must run the diagnostics of material provided by the manufacturer of the system. For more information about these procedures, see the manual of your computer.
Fix a defective system service: disable the service and confirm that this resolves the error. If so, contact the manufacturer of the system service on a possible update. If the error occurs during the system startup, restart your computer, and then press F8 to menu mode characters that displays the choice of operating system. In the Windows Advanced Options menu that results, select the last known good Configuration option. This option is most effective when a pilot or a service is added at a time.
A problem of antivirus software: disable the program and confirm that this resolves the error. If this is the case, contact the manufacturer of the program about a possible update.
Fix a corrupted NTFS volume: run Chkdsk /f /r to detect and repair disk errors. You must reboot the system before the start of the analysis of disk on a system partition. If the SCSI hard disk, check the problems between the SCSI controller and the drive.Finally, check the system log in Event Viewer for additional error messages that might help determine the device or driver that generated the error. Disable the cache in memory of the BIOS might also resolve it.
Remarks
In general, this address is in the released memory or simply not valid.
This cannot be protected by a try - except Manager - it can only be protected by a probe.
BCCode: 50 0 x 00000050<-- read="" this="">-->
* 1095.html? order = votes http://www.faultwire.com/solutions-fatal_error/page-fault-in-NONPAGED-Area-0x00000050-=========================================
Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmMyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.html-------------------------------------------------------------------------
Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
info that would help. Such as ITC and 4 others entered at the bottom left. And all others
error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during 'blue screen of death '.
hangs and displays information about all accidents of a table - free
http://www.NirSoft.NET/utils/blue_screen_view.htmlBlueScreens many are caused by old or damaged, in particular the video drivers drivers however
There are other causes.You can do mode if necessary safe or the Vista DVD command prompt or
Options recovery if your system is installed by the manufacturer.How to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlYou can try a system restore to a point before the problem started when one exists.
How to do a system restore in Windows 7
http://www.SevenForums.com/tutorials/700-system-restore.html-------------------------------------------------------------------------
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
program generates cbs.log Windows Vista (and Windows 7)
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Says not all possible
driver problems).Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers under Windows 7 (updated drivers manually using the methods above
It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlStop Windows 7 to automatically install device drivers
http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/How to disable automatic driver Installation in Windows 7 / Vista
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
Ultimate and Enterprise)
http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033-------------------------------------------------------------------------
In some cases, it may be necessary.
Startup Options recovery or Windows 7 disk repair
How to run a startup repair in Windows 7
http://www.SevenForums.com/tutorials/681-startup-repair.htmlHow to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlHow to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.htmlHow to do a repair installation to repair Windows 7
http://www.SevenForums.com/tutorials/3413-repair-install.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
I need help to activate my computer but I don't have the code. I bought a computer that has been renovated and the owner said that he has updated the computer with Windows 7, but the computer is now ask for an activation code. I tried to contact the guy but he won't answer. Is it possible to check the activation without the code? I need help and do not want to pay a hundred dollars more.
Is there a COA sticker that is attached to the machine?
If so, check to see what edition and version of Windows machine is licensed to:
COA certificate of authenticity:
http://www.Microsoft.com/howtotell/content.aspx?PG=COA
??
What is the certificate of authenticity for Windows?
http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity
Also:
Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
http://go.Microsoft.com/fwlink/?LinkId=52012 -
Original title: windows 7 starts more than 18 minutes take it please help
It's a copy of errors
Log name: SystemSource: Microsoft-Windows-WER-SystemErrorReportingDate: 03/10/2012 09:19:24Event ID: 1001Task category: noLevel: errorKeywords: ClassicUser: n/aComputer: iqraaDescription:The computer was restarted after a bugcheck. The bugcheck was: 0x000000f4 (0 x 00000003, 0x8ba289b8, 0x8ba28b24, 0x82c63df0). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 100312-800425-01.The event XML:1001 0 2 0 0 0 x 80000000000000 5848 System IQRAA 0x000000F4 (0 x 00000003, 0x8ba289b8, 0x8ba28b24, 0x82c63df0)C:\Windows\MEMORY. DMP100312-800425-01HelloDid you of recent changes to the computer before the show?Bug Check 0xF4: CRITICAL_OBJECT_TERMINATION: This indicates that a process or thread crucial to system operation has unexpectedly is released or ended.Refer to this link: http://msdn.microsoft.com/en-us/library/ff560372%28VS.85%29.aspx
Question: Several processes and threads are necessary to the functioning of the system. As they are completed for some reason, the system can no longer function.
In order to solve the problem in a better way, one must look the discharges with the debugging tools for Windows.
Please, start Windows Explorer and navigate to the C:\Windows\Minidump folder. Then, copy the files to your desktop, zip dmp dmp all in one zip archive and download the zipfile to your SkyDrive folder [1] public and post a link here.
If you do not see the dmp files, make sure that your Windows is correctly configured to generate shocks.
See this link for more information.
http://support.Microsoft.com/kb/254649
I would recommend also refer to this article for more information and troubleshooting on blue screen errors.
Resolve stop (blue screen) errors in Windows 7: http://windows.microsoft.com/en-US/windows7/Resolving-stop-blue-screen-errors-in-Windows-7
-
Hi, please advise, I can't open Group on win Server 2008 policy management, it is said
"To manage Group Policy, you must log on to the computer with a domain user account.Hi Cucu KurniaPutra,
Thanks for asking this question to Microsoft Community!
The problem occurs in Windows Server 2008 Network, please post your request on the Microsoft TechNet forums to get help.
Here is the link:http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer
It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.
Kind regards!
-
How to disable the automatic locking of the screen of the computer with windows XP
How to disable the automatic locking of the screen of the computer with windows XP? so many people responded on windows 7, but NOT a SINGLE spoke of XP. I have this problem. screen goes into sleep mode and I have to wake up even if NO PASSWORD is selected. I changed the POWER SETTINGS. Nothing helps. NEED HELP. Thank you
Well since it is already assigned, and a mod has not moved this somehow already in the XP section:
On your desktop, right-click right properties, under the screen saver are of course "on Resume, display logon screen" is NOT checked. You can also disable screen saver.
-
How can I reinstall Windows XP? I don't have my OEM of Windows ME records. I don't have my Windows XP to upgrade the disks I got the OEM. It was a free upgrade to Windows XP with my purchase of the computer with Windows Millennium Edition.
I'm sorry, but you will need a Windows 9 x / ME drive to provide during the XP installation from the XP disc is a version upgrade. There is no way around that. See if you can find a friend with an older operating system disk (not a recovery disk) to support qualification. Otherwise, you would need to buy the full version (not upgrade) of XP to install on the computer. MS - MVP - Elephant Boy computers - don't panic!
Maybe you are looking for
-
Cannot open the iCloud Control Panel on PC
I have the iCloud v3.1 Panel installed on my Windows 7 64-bit system. It worked very well with Internet Explorer. I switched to Foxfire and when I try to activate the software I get the message "JavaScript is required. To use iCloud activate JavaScri
-
HP P 8470: JBL Flip 2 not to connect to HP 8470 P
I have an employee who bought a JBL Flip 2 Bluetooth speaker. I'm completely frustrated trying to connect this thing for her laptop. The laptop is running Windows 7 Pro 64 bit, is fully patched as of today and has the latest drivers from HP softwar
-
How to FF in Rockbox and resume the video plays
Please someone help me... I have e260v1 and hav rockbox installed on it... i have converted videos using winff and load them into the video folder... but the problem is when I play them I can't fast forward em... also I can't find a way how to stop s
-
Need to disable Narrator of popping up & running; How?
I've been adventure with this system and got the Narrator on and I can't seem to stop it. It is not what I want running. Like, I'm offline for 4 years & to get all these updates now, the Narrator appears and loves to talk. Please, tell me that I c
-
where is the missing link records management?
Search can't handle files in the left column