Cannot open the iCloud Control Panel on PC

Similar Questions

• BEX64 error. Cannot open the NVIDIA Control Panel

  Signature of the problem:
  Problem event name: BEX64
  Application name: nvcplui.exe
  Application version: 3.9.760.0
  Application timestamp: 4eb932b7
  Fault Module name: NVCPL. DLL_unloaded
  Fault Module Version: 0.0.0.0
  Timestamp of Module error: 4eb93ad3
  Exception offset: 00000000652962ec
  Exception code: c0000005
  Data of the exception: 0000000000000008
  The system version: 6.1.7600.2.0.0.256.1
  Locale ID: 16393
  Additional information 1: f0fa
  More information 2: f0faa370ef99375ab701a996496ad89a
  Additional information 3: a098
  Additional information 4: a098cf87d46a1a25e3b35a0902af0ed9

  We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

  If you are overclocking STOP

  You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.

  Please follow these instructions to collect data against crashes and upload them here, to your Skydrive or a service such as Rapidshare file sharing.

  http://www.SysNative.com/forums/showthread.php/68-blue-screen-of-death-%28BSOD%29-posting-instructions-Windows-8-7-amp-Vista?p=303&viewfull=1#post303

  http://SysNative.com/0x8/BSOD_Windows7_Vista_v2.64_jcgriff2_.exe

  To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".

  The procedure:

  * Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.
  * Zip up the contents of this folder
  Please, upload to skydrive or a file sharing service and put a link to them in your next post.

  Go to start > search/run > cmd > msinfo32 and include it in the upload

  To ensure the minidumps are enabled:

  * Click Start, in the search box, type: sysdm.cpl, press ENTER.
  * On the Advanced tab, click Startup and recovery... Settings button.
  * Make sure that automatically restart is unchecked.
  * Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).
  * Ensure to that small Dump Directory is listed as % systemroot%\Minidump.
  * OK your way out.
  * Reboot if changes have been made.

  http://www.SysNative.com/forums/showthread.php/325-BSODs-but-no-dump-files

  http://www.osronline.com/article.cfm?article=545

  Please also go to start > run > msinfo32 and record the results.  Send it with the DMP files, thank you.

• Error: Could not find the com.sun.deploy.ControlPanel of the main class when tried to open the Java Control Panel

  Original title: could not open the Java Control Panel

  I just downloaded a new update of Java 6 and it doesn't work. I use Java to view charts & graphs of changes in the stock market & it works with applications that I used before, but not for that I started to use after the new update has been installed.

  I tried to fix it by clicking on the Java Control Panel & I get this message:

  Class main com.sun.deploy.ControlPanel is not found

  How can I fix?

  Hi Chris240560,

  Try to Uninstall and reinstall java and check the result.

  For further assistance, we recommend you to make contact with The team of Support of Java for better assistance.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I get cannot load the icloud preferences panel and cannot access the photos

  I upgraded to Yosemite and now my photos do not recognize my icloud shared photos.  I tried to open the icloud preferences to ensure that pictures are always enabled but I get "unable to load the icloud preferences panel" every time.

  Suggestions?

  May be a corrupt .plist.

  Make a backup, preferably 2 backups on 2 separate drives.

  Quit the application.

  Go to Finder and select your user folder. With this Finder window as the windshield, select Finder/display/display options for presenting or order - J.  When the display options opens, check "show the library folder. This should make your visible user library folder in your user folder.  Select the library. Then go to Preferences/com.apple.systempreferences.plist.  Move the .plist on your desktop.

  Restart your computer, open the application and test. If it works fine, delete the plist for the office.

  If the application is the same, return the .plist where you got it, crushing the latest.

  Thanks to leonie for certain information contained in this.

• Cannot access the printer control panel application downloads

  My printer is connected to my network hub, eprint is activated and I can email print my eprint service that prints

  However, when I try to connect to the application, all I can get is quick forms. I get 1 error server - there was a problem connecting to the server

  Please can someone help?

  Hello

  First try clicking the printer icon, select Preferences, then select define a country / region.

  Ensure that the correct area is selected, and then try again.

  If the same persists try restarting your router and the hub by unplugging its power for a while. Once the devices are completely upward and you are capable of internet connecct again restart the printer and try again.

  If the same dtill persists try to define a DNS address manually:

  Open the amd configuration Menu and select Menu wireless.

  Press Setup display network and locate IP address.

  Type the IP address in your web browsing and select network.

  Select IPv4 and a manual DNS.

  Set the primary DNS as 8.8.8.8

  and the secondary as 8.8.4.4

  If you don't see such an IPv4 option select the submenu of networking, and IP address.

  I guess that those who must resolve this, if not I suggest turning off and reset services web, but you will lose your current addtess ePrint and will have to choose a new instead.

  To do so go to configuration > Web Services and select Remove Web Services.

  Then, reopen the meu to Web Services and follow the steps to reactivate the service.

  Using the printed sheet, add the Code to request provided to the HP ePrint or on the connected HP site and select a new address for your printer.

  Hope that helps getting the problem solved.

  Shlomi

• I get the error message "cannot open the access control editor. The system cannot find the file specified. "

  I'm trying to move some files around, but when I try to give the necessary permission, nothing happens, the file stays where it was.

  Hello

  ·         Did you make any changes before the show?

  ·         Do you have a password for your user account?

  ·         How many accounts user are there in your computer?

  I suggest you follow the troubleshooting steps below to help solve the problem.

  Method 1:

  Turn off UAC and check if that helps.

  To change UAC settings follow the link below:

  Enable or disable the User Account Control

  Method2:

  You can also create a new user account and check it, if the problem is resolved:

  Create a user account

  If the problem persists no new user account, then I would say that correct you the user account damaged by following the link below:

  Difficulty of a corrupted user profile

• Lockout C drive. Cannot change the permissions, cannot not disable the user account control, unable to open the access control editor, cannot change the property.

  While trying to change the folder permissions for a second user on my computer, I did something that I lock my C drive.

  When I log in with the administrator account, I get the following popup:

  C:\Windows\System32\SystemPropertiesComputerName.exe
  Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item.

  I am not able to access denied drive from C to all 'access '.

  When I right click on the C drive and select Properties > Security tab > go on, said the popup "cannot open the access control editor. Access is denied. »

  When you select Properties > Security tab > advanced > owner tab > continue, current owner says "unable to display current owner. Can not change, cannot be changed.

  I can't turn off user account control, nothing happens when I click the icon or the text.

  I was able to create the 'hidden' administrator account, but I can't do anything from there, either.

  Any suggestions?

  Hello

  Recovery disk will not help you perform the upgrade on the spot. I suggest to organise a Windows Vista DVD and try to perform the upgrade in-place.

• Apple icloud Control Panel does not

  I can't open apple iCloud Panel in windows7 64 bit in my user account, but if I create another user account it will open. As anyone got the answers, so I can solve this problem?

  Hi DenG26,

  Thanks for posting in the Microsoft community.

  1. you get any error message?

  2 have had any changes made to the computer before the show?

  Since the iCloud Control Panel takes care of new user account, probably the old user account may be damaged.

  To copy the files to the new user profile, see the link.

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/is-is/Windows7/fix-a-corrupted-user-profile

  I also suggest you to contact the assistance to iCloud for assistance team.

  http://www.Apple.com/support/icloud/

• iCloud Control Panel Ver 5.2 is not installed in Outlook 2016

  After you have installed the iCloud Control Panel for Windows 10

  you are prompted to configure Outlook for e-mail, contacts, calendars

  It will not be implemented (only said setting upward) I waited as long as 30 minutes

  tried to turn off the firewall and the two TrendMicro

  still does not work

  have also found that downloaded the program and the re

  I asked the same question on the help page of Windows and it is this that technology Windows, purple, wrote:

  VioletChen_MSFT responded on June 14, 2016

  • Microsoft
  • Support engineer

  In reply to SteveNightingale post on June 14, 2016

  Hi Steve,.

  Thanks for your reply.

  I tested on my side and I can't sync my calendar to iCloud for 2016 Outlook either. We don't know if Apple will release a fix. We recommend that post you a new thread in the Apple Support communities for additional help. Your understanding is appreciated.

  Kind regards
  Violet

• Error "could not open the access control editor, access is denied" while accessing the C: drive

  Hello

  I use Home Basic to Windows 7, I saw two drive C: / and R. /. by mistake I changed security optional properties of the discs now I can

  to access only a: .my c: drive / drive does not open when I open drive c properties, then on security and it continue display "cannot open the access control editor, access is denied.any another application do not open I can not even able to restore it, please help step by step"

  thanx

  Original title: in the c drive security permissions

  Hi Ravindra,

  Thanks for posting your question on the Forum of the Microsoft community.

  Permissions are rules associated with objects on a computer or network, such as files and folders. Permissions determine whether you can access an object and what you can do with him. For example, you might have access to a document in a shared folder on a network. Also, refer to:

  What to know before applying permissions to a file or folder

  According to your error message. I would like you try these steps and check if the problem persists.

  Steps for the reader:
   
  a. click on the drive, click Propertiesand then click the Security tab.
  b. click Advancedand then click the owner tab.
  c. click change, and then do one of the following:
  (d) to change the owner to a user or group that is not listed, click other users and groups and enter the object name to select (examples), type the name of the user or group and then click OK.
  e. to change the owner to a user or a group is listed in the change of ownership of the area, click the new owner.
  f. If you want to take ownership of the contents of the disc, select the Replace owner of subcontainers and objects of the box.
  g. click OKand then click Yes when you receive the following message appears: you are not allowed to read the contents of directory folder name. Do you want to replace the the directory permissions with permissions granting you full control?
  h. all permissions will be replaced if you click Yes.
  i. click OK.

  Check if the problem persists.

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• Error: System 32\nvcpl.cpl. Cannot open the control panel.

  While trying to open Control Panel with Windows XP Professional, I get this error and the Control Panel does not correctly or at all.

  None of your Control Panel options don't work or is a certain (s)?

  Is that really you see the exact error message?

  The file nvcpl.cpl belong to the graphics card NVIDIA and the NVIDIA Control Panel Applet

  If you have any NVIDIA products installed, you should tell us more about your system as follows:

  Since the Microsoft Answers forum does not have any kind of information system request when a new question is asked, we know absolutely nothing about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  Do you see that you think not you should see and when you see it?

  If the system works, what do you think might have changed since the last time it did not work properly?

  Now make some clarifications:

  Click Start, run and enter in the box:

  Msinfo32

  Click OK, and when the system info summary appears, click on edit, select all (Ctrl-A), copy (Ctrl-C) and paste (Ctrl-V) the information back here.

  For information about video drivers, expand components, click view, click on edit, select all, copy and then paste the information here.

  There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.

  This will minimize back Q & A and eliminate guesswork.

• Selection of the layer not bound to cancel the story when the effect controls panel is open.

  Did anyone else noticed strange with the undo history behavior when the effect controls panel is opened?

  Try this:

  1. have the layers panel, the history and the visible effects at the same time.

  2. open an image

  3. duplicate the layer

  4 make a new empty layer

  5. take the Brush tool and paint two strokes on the new Virgin layer

  6 return the layer duplicated under the layer of white and two strokes of paint

  7. in the history panel, back in the States in history and look at the layers panel

  

  Now close the effect controls panel

  1. in the history panel, select the last State of history

  2 go back in the history States

  Noticed a difference?

  Photoshop elements 11 on a windows 8 bit x 64 system.

  Title of the message was edited by: Brett N

  I see the behavior, and I'll log a bug for her report. Very strange, but good catch what the effects Panel which is the source!

  27Prac, make sure that the effect controls panel is pointing upwards, it is essential. But I tested it on Windows and Mac and see on each.

• T430: Cannot change the GPU using the NVIDIA Control Panel

  Hello world

  I recently bought a T430 including a NVIDIA NVS 5400 M. games graphics card (for example, Max Payne 3) used to run fast, using the NVIDIA GPU. Today, I tried to play a video game once more (after having not played for several weeks). Unfortunately, my OS (Win7, 64-bit) assigns the GPU from Intel, resulting in a much lower speed. Using the NVIDIA Control Panel, I can't change my favorite GPU (changes will not be saved). I already run a update of Lenovo and installed the latest graphics driver (296.88), which resulted in no improvement.

  When you start a game, I can choose my graphics manually, but I would like to configure some general settings using the control panel.

  Do you have any solutions?

  Thank you very much.

  
  

• CS4 Web Standard: upgrade of control; Cannot open the Dw & Fw

  I got a new pc 3 weeks; transferred * CS4, then the launch of Dw and Fw, there is a message (as shown below) box for example

  the license is on an experimental basis. But I misplaced the MX2004 license and today the trial expires, and I can't open/launch Dw and Fw.

  I have reinstall CS4 (DVD), but still cannot open the Dw & Fw

  I am the user ONLY of MX or CS and the current/new * pc is my 3rd or 4th CS4 (DVD set) bought in 2008.

  (*) - The previous and new pc works on Windows 10.

  -It could have been errors during the transfers/back up between the discs (unfortunately, given in the external hard have)
  removed)

  I chat with adobe support and they asked me to go on the forums; That's why I appreciate for any assistance given.

  Finally, I am a user of Fw & Dw base; Use them only for image and text content, and for now, I really need to change content

  and sent to a new site.

  Thank you.

  

  

  The only way to get the programs to work is to enter the serial number of the previous product. Did you register your original software with Macromedia? If so, you should be able to get your serial number by logging in to your Adobe account. If this isn't the case, you're out of luck.

• XP, Windows Media Player tries to open each file and responds with, "windows media player cannot open the file.

  I can't even go to open, ' Change / Remove Programs "Control Panel. Same shortcuts on my desktop are not open without WMP trying to open the first file. Why is it in the middle of everything? How can I disable WMP or stop trying to open all files, media files that are not same? There version of WMP 9, but when I try to download a newer version, it won't work because WMP keeps popping up, saying: it cannot open the file.

  Hello

  Were there any changes (hardware or software) to the computer before the show?

  Perform the steps in the article mentioned below and check if the problem persists.

  Windows Media Player invalid file Error Message Format

  Hope this information helps.