Auto crossfade

Similar Questions

• Always unwanted clicking sound on both ends of a clip

  When I put voice segments together in the multitrack session I get this annoying "click on" sound, or a glitch, at the beginning of each clip. It ruins everything naturally and makes my unnecessary records. They are not on the record, but do occur when I set up the Audition segments. Seems to me that the hearing cannot handle the process of putting clips together? Whenever the bar reached the beginning of the next clip that annoying sound comes in. It's like an electrical impulse or something, difficult to describe. I did a test with no noise in the clips, just add them, the sound of glitch was not there then. When I mark a section in a clip and add silence and operate the read head just inside that segment the sound is in the beginning and the end as well. As if the software is actually produce these signals. When I edit each clip solitaire I try to add a segment to the silence of death in the beginning and the end, when to re-enter the multitrack session again to play what seems to have removed most of the unwanted clicks but then the mixture is more loose with the longer time between clips, and not the way I wanted it to be. I do the voice at work, this problem only on the voice recording. The record microphone went very well, sound when I start putting clips and sections together in multitrack mode starting with these problems occur.

  I have heard others complain about the same thing here and there. A bug?

  perrybrus wrote:

  I have heard others complain about the same thing here and there. A bug?

  My God, no. Fair waveforms not mating at intersections and jumping rather abruptly from one level to another. If you place in multitrack clips, then put it while they auto-crossfade when set on the same track - all you have to do is drag one over the other for a few milliseconds stop what is happening. It is the way to get silent changes. If you go into Preferences > multitrack clips, you will find the available options.

• Stop auto play of video in Safari on the Sierra?

  I upgraded to Sierra and I used to be able to use a fantastic extension called ClickToFlash, which would replace all the Flash on a web page with a white window and I would click above to load the Flash content.

  This extension does not work on Sierra I am looking for an alternative.

  In my view, there ClickToPlugin but after installing it, YouTube videos are all black screens and I do not see the drop down choices of media. So it seems that it is watered.

  I can't use Safari if I can't stop Auto playing every single video on each web page. Anyone know anything else?

  Thank you!

  He can still work... try this.

  Open system preferences > Flash Player and select the Advanced tab, and then click clear all under settings and navigation data.

  Then quit and relaunch Safari and then test ClickToFlash.

• Trying to connect a computer to the lan port Aiport Express "auto assigned IP address"

  I am trying to connect a computer to the lan on my Airport Express port. In preferences, it says "status: connected, Ethernet has an assigned IP address and won't be able to connect to the internet." Any suggestions?

  An "auto assigned" IP address indicates that your computer could not find or negotiate with a DHCP server to obtain an IP address appropriate for network access.

  It should be more on your network to provide assistance if you need it. For example, is the terminal of AirPort Express the only router in the current configuration of your network? What exact model do? What is the brand and model of your modem Internet?

• Search iPhone settings for "Auto-Lock" does not work

  Hello

  Does anyone know why the Auto-Lock setting is not to be found when you use the search at the top of the main settings page.

  From time to time, when I'm on a conference call, I like to set the auto-lock on 'Never', so I can leave the visible main phone screen to mute/one-mute the call without having to unlock the phone. I have the memory of a goldfish, so I do not remember that it is in the section "Viewing and brightness" and that is why I use the search at the top of the main settings page field. I would normally enter 'Auto', and it would be "Auto-Lock" for me.

  Since the release of iOS10, the la recherche search can't find this definition more although it still is in the section "viewing and brightness.

  The search for other settings seems to work, but it seems that it is just this one, but I have not actually tried too.

  Any ideas on what is happening and how I could get to find the Auto-Lock in the future?

  Thank you

  B1GPappaSmurf wrote:

  Any ideas on what is happening and how I could get to find the Auto-Lock in the future?

  Seems to be a bug, so nothing you can do but remember where the parameter is and report the bug:

  http://www.Apple.com/feedback/iPhone.html

• Cannot disable Auto-capitaliser

  On my iPad in iOS 10.0.02, even after I turn off in the settings, guard Auto-capitaliser capitalize what he thinks is the first word of a sentence. How can I fix it? I restarted apps and the unit.

  Interesting. I never thought that button worked but I am test it and it turned off my auto-caps.

  Start simple with a reset. Press and hold the home and power buttons until the Apple logo appears. Release the two buttons. Wait for your iPad to begin on its own.

  If the reset does not try the settings > general > reset > reset all settings. You will lose any info, but you have to reenter your wifi access code.

• Updated my phone to iOS 10.0.2. The auto lock feature disappeared from the General settings. Where is it now?

  Updated my phone to iOS 10.0.2. The auto lock feature disappeared from the General settings. Where is it now?

  You will find the auto lock settings in settings > display and brightness.

• How to stop Auto-start for videos

  Videos in Safari auto-start now. I would like to stop this function.

  It is a function of the site, so it is not that you can do.

• Why auto unlock Mac with Apple Watch stop working?

  When I upgraded to first watch OS 3 and macOS Sierra, auto unlock Mac with Apple Watch worked. A few days change it has stopped working. What could have happened? I checked all the settings/preferences.

  Your Apple Watch is unlocked?

• How the auto uppercase the first letter of each sentence

  I use the latest version of the Pages on the Sierra of the OS and I am trying to find a way to automatically capitalize the first letter of each sentence with nothing doesn't. I've been a user of Pages for years and every time announced a new update is all what I care about is adding this feature simple but important. So, now that the new update is here I can not yet understand how to take advantage of the auto and I can't find workarounds online to help me do it. Any idea?

  You can use WordService from DEVONtechnologies, free in the Mac App Store. You can then go to System Preferences > keyboard > shortcuts > Services & enable those you want. You can then select the text you want to apply the service to & go to Pages > Services & select initial caps of sentences. It is also possible to assign a keyboard shortcut to services. With the help of this device, or similar functionality in any word processing application still not to revert to words in a sentence that should be capitalized as 'I' or pronunciations. You will also have the problem of it capitalized words after the period for the abbreviation.

  I do it the traditional way, using the SHIFT key when necessary. It is advisable to learn to type using the SHIFT key, rather than relying on the software to do it for you. Just like the use of a spellchecker. It's good, but it will not go back on the words that are spelled correctly but not the correct spelling of the situation.

  

• Auto unlock with Apple Watch

  Dear support team Apple,

  I have problem with MacOS Sierra feature "Auto Unlock with Apple Watch". I upgraded my MacBook Pro 2015 until the latest Version of the OS and Apple Watch until the OS 3.

  I followed the instructions automatically unlock your Mac with your Apple Watch - Apple Support

  As a result:

  1. two factor authentication enabled on iCloud account;

  2. pass code activated on Apple Watch;

  3. I use iCloud even on Mac and on the watch.

  But the option is not in the system preferences. Attached printscreen.

  I have exactly the same problem. I checked that I have two factor, not two steps of authentication. I have a the same devices, 6 2015 s of MacBook Pro, Apple Watch and iPhone more. The option does not appear for me either.

• Turn on auto cannot unlock with Apple Watch

  Hi guys,.

  I need help here.  I'm on macOS Sierra on a MacBook Pro (retina, 13 inches, end of 2013).  I actually had auto unlock with my Apple Watch two days ago.  But then I did a stupid thing yesterday and had to restore the MacBook OSX Maverick and re-upgrade to Sierra.  I can't activate longer auto unlock with Apple Watch now and it's really frustrating.

  Thanks in advance for your help.

  Don't feel alone, there are a lot of problems. Very inconsistent behavior.

  Requirements for continuity on Mac, iPhone, iPad, iPod touch and Apple Watch - Apple Support

  http://www.CultofMac.com/441405/how-to-use-Apple-watch-to-unlock-your-Mac-in-Mac os-sierra.

• 2SV v. 2FA for Auto unlock with Apple Watch

  Try to set up the auto unlock with Apple Watch on my MacBook Air (fall 2013) after the installation of Sierra. Get this message:

  

  Off the 2SV using applied.apple.com

  

  ... and still get the same message "2FA is required" box "Security & Privacy".

  What I am doing wrong?

  P.S., rescue email Apple ID has not yet been verified, because it belongs to my sister who lives in a very different time zone, but I don't see how this should matter for the automatic implementation of release.

  The message is mainly to tell you that you must enable two-factor authentication, is not that you should disable 2SV. You will need to disable 2SV before you can activate 2FA.

  You should always activate 2FA it to AppleID.apple.com

  I don't know why you don't see the option to activate 2FA here on the Security section. You have a device running El Capitan or later, or a device running iOS 9 or a later version in your list of devices?

  For Apple ID - Apple Support two-factor authentication

• Auto screen on after 10 in the 6s iPhone iOS upgrade

  Hello

  I deal with the issue of auto screen, when every I picked up my cell phone in my hand or take his car on any movement of 1 place to another without moving the screen of my pent is lit for 2 seconds, what happens after the upgrade to iOS 10.

  Please notify

  Thank you

  Yougeshwar Khatri

  Hi there, ypkkhatri!

  Thank you for reaching out by Apple Support communities. After reading your post, I understand that after updating to iOS 10, your iPhone 6 s screen turns on automatically when you pick up the phone or remove it from the charger. I know there has been a lot of changes in functionality with iOS 10, so I really want to help unravel what happens with you!

  From the information you have provided us with, what you are experiencing is a new feature called Raise to Wake. Whenever you take your iPhone, the screen turns on automatically in order to check the time or your notifications without having to press the buttons. This is expected behavior, and the screen stays locked when this happens.

  Personally, I like this feature a lot, but everyone has their own preferences. If you want to disable the reminder to wake up, you can do this under settings > general > display and brightness, as described here: adjust the display settings on your iPhone, iPad or iPod touch

  I also recommend checking out the following site; It will give you more information about the new features of iOS 10 and help you familiarize yourself with all of the changes: for iOS 10 iPhone user Guide

  See you soon!

• Auto unlock with Apple Watch does not appear in my window security and confidentiality

  "Disable the automatic connection' or Auto unlock with Apple Watch" appears in my window security and confidentiality

  Hello

  Automatic unlocking with Apple Watch is available for the Mac models since the mid-2013 and later running macOS Sierra.

  Check that:

  • Your Mac has Bluetooth and Wi - Fi enabled.
  • Your Apple ID use two factor authentication (as opposed to the two-step verification):
    • For Apple ID - Apple Support two-factor authentication
    • If you are currently using two-step verification instead, follow the instructions here to turn off (under "How can I disable two-step verification?") before you enable two-factor authentication:
      • Frequently asked questions about the audit in two steps for Apple ID - Apple Support
  • Your Mac and Apple Watch are connected to iCloud with the same Apple ID:
    • On your Mac, choose Apple () menu > System Preferences, and then click iCloud.
    • On your iPhone, open the Apple Watch app, then go to general > Apple ID.
  • Your Apple Watch uses a password:
    • On your iPhone, open the Apple Watch app, then type the access code.
  • Transfer procedure is enabled on your iPhone and your Mac:
    • On your iPhone, go to: settings > general > transfer procedure.
    • On your Mac, go to: System preferences > General - down, tick the option "Allow transfer between the Mac and your iCloud devices."
    • If these parameters are already enabled, a user has found that it helped to deactivate and reactivate the procedure of transfer on their iPhone.

  More information:

  Automatically unlock your Mac with your Apple Watch - Apple Support