Auto Off?

Similar Questions

• HP 6968: Auto Off does not engage

  Hello

  I work on behalf of Epson from a local electronics dealer Superstore but bit the bullet and bought this printer because of its multitude of features and significant improvements on HP 2015 models available in my store (as well as the sale price) competitive $59.99, down from $179.99. Overall, I am satisfied with my purchase, but have noticed that the auto-off function does not work. It is currently set to turn off after 1 hour, but does not. In contrast, regular power off has been tested and works as expected. Mode 'sleep' is currently on a minimum of 15 minutes, well I don't think that this is in no way related to the auto off (which has a limit of 8 hours, unless I'm mistaken). I tried already to switch different things in the power management menu, as to disable the cursor for turning the voltage switch programmed, but nothing works. It does not completely turn off (i.e. the power button stays on and the unit is essentially asleep, not off).

  Any opinions?

  I captured the following JO 6960 Pro series (page 3) user guide available to support HP (http://h10032.www1.hp.com/ctg/Manual/c05135226) page:

  Auto-off is turned on when the printer is turned on, if the printer has no network, fax or capacity Wi - Fi Direct, or does not use these capabilities.

  Auto power off is disabled when a printer wireless or Wi - Fi Direct ability is activated or when a printer with fax, USB, or Ethernet network capability establishes a fax, USB or Ethernet network connection.

  Please check if this feature is disabled in your case because of connections to the computer or mobile devices (with or without wire).

  You can also try send a job to the device to check if the camera is capable of wake up automatically upon receipt of the work (when the unit has not been used for more than 8 hours).

  I hope this helps!

• Lose the bookmark after auto-off

  I recently bought a Sansa Clip 4 GB because I read that it has good bookmarking features; However, I am having a little trouble with it.

  I listen to the really long (6 hour radio shows) mp3 files I record from my computer, so the bookmarking feature is a must.  However, I find that so Auto-est under tension (i.e.  -> Power-> Auto Power setting->-> 10 minutes), the bookmark is lost after the power-auto-off device and the reader can read the MP3 from the beginning when I turn on the player.  Anyone else see this issue?

  Mp3 files are placed in the "AUDIO" folder (so the bookmarks should be configured automatically), and I have the latest firmwire (V02.01.32A) installed.

  Thank you

  James

  I tried to do this kind of mp3 "Audiobook" and the bookmark seems to work now after the auto.  Thank you!

• Difference between "Auto off" and "Sleep" on LaserJet P1102W

  The user guide for the LaserJet P1102W indicates that the default Auto setting in the properties is 5 minutes.  "Automatic stop" drop-down list does not contain a setting of 5 minutes - rather it contains "never, 30 min and 1,2,4,8, & 24 hours."  However, the drop-down list 'Sleep' contain 5 min and other selections up to 1 hour.  What is the difference between auto-off"and"Sleep ".

  After the installation of this new printer, the default settings have been = 5 Minutes ' Sleep' and 'Auto off' = never

  I have several computers around the House than any print to the same printer.  I want to always available for printing without issue in the basement to activate it, but yet they want more economic mode.

  What is the difference between 'Sleep' and 'Auto off' and how should I put them in my terms of service desired?

  Thank you.

  Hello

  I understand that you are looking for some explanations between the Sleep and automatic shutdown of the Laserjet P1102W printer. I would be happy to offer you answers!

  For your desired operating conditions, I think that you already put as you would like. Standby essentially puts the printer in a State of very low power consumption, but the printer can be awakened from this State by sending a print job (meaning you don't have to go to the printer to remove it from that State). The auto-off function off the printer completely after a period of time. The only way to take the printer out of State would be to go to the printer and press the power button.

  To have several computers connected to this one printer I would recommend leaving the auto-off Never and Eve to what you think is the best. As I said, the printer will wake up fashion 'sleep' and accomplish what you ask without physically going to the printer.

  Hope this helps, have a nice day!

• User - Auto-Off function after comments "Check disk" for Win 7 & Win 8 is over

  Hello

  Hard disk for error checking and fixing it is a routine system for Office PC network maintenance, if the user is to have performance at all times.

  The last PC has a hard drive of 500 GB to 1 TB size and many files for sanning. If will take about 10-20 minutes to perform the task. Generally it is not recommended to do so due to the timing tight work at office hours. Most of the office user prefer to do after working hours leaving their PC on for scanning. To Win 7 & Win 8 do not have an auto-off function after completion of the task of "Check Disk". The PC must be on during the night after scanning.

  For energy saving, I would suggest a new feature that allows the user to choose to shut down their PC when the task is completed.

  Thank you

  Low

  Hey Joe,

  Thanks for the code of your order.

  Can I know how to run this command? I still have to go in my computer > C drive > right click > properties > tool > Check Disk to perform this task?

  I use the desktop PC network in which I am not an administrator, what I'm looking for the assistance of the administrator to create this file in my PC?

  If I want to check the disk with this command, do window 7 / 8 allow me to do?

  Thank you

  Low

  Hello

  Thanks for the reply. The commands shown above are content to a Windows batch file. You simply create the Windows batch file using Notepad. The steps posted above shows how to create a file Windows specific command and its content. It then saves at a given location. You can then open the Windows created batch file to process orders (content).

  No, it's all just a new file, we create with the .bat extension so that Windows will understand that the file we will create a Windows batch file. Thus, we will be able to run these commands at the command prompt. In DOS, OS/2and also Microsoft Windows, the batch file is the name given to a type of script file, a text file containing a series of commands to be executed by the Shell.
  Unfortunately, chkdsk requires administrator privileges to run correctly. You need to run the command of Windows as Administrator file to run all the commands, but you don't need administrator privileges to create the file. Even check the disc from the properties of the disc requires administrator privileges. You must be the administrator of your operating system, but not the administrator of your network.
  Windows will not prompt you to rerun the command of Windows as Administrator file. Instead, it will show you an error message indicating that you are not an administrator, and the command will not run if the Windows command file, you try to run contains commands that require administrator privileges, and you tried to run the command of Windows under a limited user account file. To avoid this problem, start the batch file to Windows as an administrator to ensure that all commands in the Windows batch file will run correctly.
  The commands shown above will do the following
  • Turn off echo command
  • Scan the drive DriveLetter errors found during the analysis of fixation
  • Shut down the computer after 0 seconds

  Note: to run a particular file as administrator, right click on the file and select run as administrator
  Thank you
  I hope this helps :)

• Free auto-off setting on multiple virtual machines

  Hello

  I have several machines, I want to set the "auto-off free" Annotation on IT.

  I tried this

  Set-Annotation -Entity "VMname" -CustomAttribute "Auto-shutdown Exempt" -Value ON
  
  which works fine on 1 machine
  
  

  I created a folder and moved the VMs and tried

  Set-Annotation -Entity "folder name" -CustomAttribute "Auto-shutdown Exempt" -Value ON 

  but it did not work.

  I think I need to use the

  Get-file 'xxxx '. Set Annotation - entity $host - CustomAttribute "-free auto-off" - value WE

  But what value goes after - entity?

  I don't want to list all the names of virtual machine

  Thanks in advance

  You can try:

  Get-file 'xxxx '. Get - VM | Set Annotation - CustomAttribute "-free auto-off" - value WE

  Best regards, Robert

• PC problem error 4609, more Services Auto off, No system, no connection network restore

  Win XP SP3:

  I can't open an element of individual logs in the application log.

  It connects 4609 error repeatedly.

  System shows a network card, but it does not show under network in the control panel.

  Most of the Auto Services are OFF... and they will not start.

  I am running an analysis of McAfee Viruscan then Stinger and Malwarebytes.

  (EDIT... Malwarebytes does not... associated with stopped services?... error is Runtime Error 32... failed to load control 'lvbalGrid' vbalsgri6.ocs.)

  What can I do else?

  I use the system update WSUS... and updates if it is enough to run on this PC.  It had not updated in a few months.

  EDIT: Device Manager appears normal.

  I have an other PC SP3 of XP which has the same symptoms:

  No network connection

  does not have malwarebytes

  no system restore

  Cannot open elements individual event viewer

  many auto services are turned off

  both started around April 21, when I published updates to the WSUS Server Windows.

  I have 2 PC more than probably having the same problem.

  Edit3: Use memory and CPU in both computers is very low... nothing happens... no network activity at all.

  solved... I couldn't wait and had to call the excellent support... credit MS Bus support!

  McAfee Viruscan has caused the problem of corrupt the windows\system32\svchost.exe file.

  I fixed it by replacing the file svchost.exe with a good known of xp sp3... and McAfee update to the latest DAT files.

  Because him copy / paste was dead, I had to use DOS or cmd.exe to copy the file from a USB key.

  http://blogs.technet.com/configurationmgr/archive/2010/04/22/Configuration-Manager-2007-task-sequence-to-assist-in-resolving-McAfee-antivirus-deleting-Svchost-exe.aspx

• Windows error after auto-off

  My laptop turns off automatically when left unattended.
  It seems to be in hibernation and I pressed the button TO turn it off.
  When I turn it on again, I get a Windows error, one with the ' send report / do not send report.
  Message.

  Can someone tell me what is the cause?

  I saw this on laptop to friend (s) (WXP) a long time ago. No doubt some Microsoft process that runs in the background causes this error message, but we discover that one.
  My friend was so frustrated on this matter and that he would not seek the solution. He installed the operating system again and after a clean OS install, everything was OK again.

  Can you please tell us what operating system do you use?

• iPod Touch 5th generation will 20% < 10-minute auto-off battery

  When my iPod Touch 5th generation gives me a 20% battery warning, it is not same exact distance - the thing turns off within 10 minutes of use. 100% to 20% takes days and days, but the latter so-called 20% is wildly inaccurate.

  I tried to let him stay off for 10 to 12 hours before recharging, hoping that it would be to calibrate the battery, but no luck.

  Someone at - it suggestions?

  % battery is not accurate on an iPod. If there are sufficient autonomy I would do anything.

  You can try:

  -Reset the device iOS. Nothing will be lost

  Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

  ten seconds, until the Apple logo appears.

  -Fee for at least 8 hours

  -Reset all settings

  Go to settings > general > Reset and tap reset all settings.

  All your preferences and settings are reset. Information (such as your contacts and calendars) and media (such as songs and videos) are not affected.

  -Restore from backup. See:

  Restore your device from an iCloud or iTunes backup - Apple Support

  -Restore factory settings/new iOS device.

• Given that microsoft emptied my XP cover, he left a program on my pc thet pop first start saying updated auto off & I can't activate or delete the line of irrating. Help!

  Popup PC says no 'automatic updates' on every boot I can't meet or delete this 'thing'. Was created when the dumped micro EP supporrt. Help! It ia a P A I N daily!

  Hello

  1st get the control panel, click Security Center and on the left pane, you will see a few select options one last (change the way Security Center alerts me) then U will see 3 options such as the firewall, automatic updates, and virus protection. In the box to uncheck automatic updates.
  Next back to the center of windows security and below U will see Manage security settings for "select updates and select turn off automatic updates. automatic
  Hope tis helps
  Cordially and hav a nice day.

• BlackBerry Smartphones turning BB turn it back on after auto-off

  Hello world!

  It can be simple, but I've looked everywhere...

  My camera turns off at 12:00 and returns at 06:00.

  If I need to make a call at 03:00, how I turn it back on?

  Help

  Scott

  Thank you kijanasmart! I'll give that a go. (I didn't know that the red button was able to...)

• BlackBerry smartphone screen auto-off?

  Hello

  a small question. can't be able to configure the "BOLD" to turn off the display after a period of inactivity.

  Have implemented

  backlight timeout: 30 sec

  automatically dim backlight: WE

  but the screen stays on even when I have keylock;

  Any thoughts?

  Thank you very much

  See if a simple reboot will correct it. A reboot fixes more often the simplest glitches.

  With the BlackBerry device powered time, remove battery for a few seconds and then reinsert the battery to restart.

• Why my computer is it auto off

  ill be using my computer and it stops just down, turns off by its self

  Hello

  
  1. deal with the question of the unexpected stop randomly and during the execution of a specific task?
  
  2. you receive a blue screen message / error code while the computer shuts down?
  
  3. do you feel one of the following issues before closing: -.
  a. noisy CPU fan noise?
  
  (b) excessive heat?
  
  c. hard drive beep / chirping noises?
  4. what was the software or the hardware recent changes made to the computer?
  
  5 are you facing this problem on a desktop or laptop?
  
  Also, please elaborate on the question and answer with your operating system computers and detailed hardware configuration.
  
  Please post the requested information for a better understanding of the issue.
   

  Please check the Event Viewer logs to find errors in application logs.

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

  Please post the results for a better understanding.

  See also,

   
  Suggestions for a question on the help forums
  http://support.Microsoft.com/kb/555375
   
   

• Auto OFF Dreamweaver refreshing files

  Auto-refresh files Dreamweaver is causing a problem with our cloud storage.  If we don't save every few minutes, we lose all our changes because Dreamweaver reloads the previous saved version of the file.  How can I stop this?

  This usually occurs on a computer, because Dreamweaver is informed that the file you are using is the same as that on the disk.  But for some reason it isn't do this on the cloud, and then it reloads the old version, overwriting your changes.

  Thank you

  Nicola

  In the Site Manager (remote server-> advanced), you can disable "maintain synchronization" and "load automatically...". »

  I've never had those put on the market. I much prefer to decide when the file should be downloaded.

• How can I disable the auto off message Office?

  need to leave the Office response

  Usually, configure you it via webmail.

  If you set up in thunderbird, then you would have had to leave your computer connected to your user account, Thunderbird running and connected to the internet. Not really a very safe option if you are not at home with the computer, so why people set up in webmail.
  You have set up a message filter and created a Template e-mail so he could use.
  so if there is no email template and Message Filter to disable in Thunderbird, then it is not Thunderbird, it is the server.
  Suggest you connect to webmail and check your settings.