Auto rotation when printing?

Similar Questions

• cropped pages turn when printing

  I'm new to using Acrobat, so forgive a maybe easy question.

  I have a PDF file and remove the lower part of two pages.  I tried to use crops, but that seems to create a page that is shorter than the paper letter.  When the file is printed, these two pages change from portrait to landscape and print on the side.  Is there a way to avoid this?  Or to accomplish this I try using a different technique?

  TigerMo53 wrote:

  I'm new to using Acrobat, so forgive a maybe easy question.

  I have a PDF file and remove the lower part of two pages.  I tried to use crops, but that seems to create a page that is shorter than the paper letter.  When the file is printed, these two pages change from portrait to landscape and print on the side.  Is there a way to avoid this?  Or to accomplish this I try using a different technique?

  First, reframe your pages. Then, when you go to print menu choose none:

  

  Then uncheck the Auto-Rotate and center:

  

  Then try to print Document. Note: Most of the printers if less than half a page, there will no print then you must manually eject the paper.

  Print the layout. Make sure that the page is set for 8-1/2 by 11 letter.

• Elite x 2 1012: Disable "auto rotation" on Elite X 2 1012

  I have a X 2 1012 elite and I can't conrol the function "auto rotation". There is no hardware button and I do not see a combination of keys.

  Yet when I go into the section display settings for Windows 10 "rotation lock" button is grayed out, - I can't select it.

  Any suggestions?

  Shahman,

  I was wondering if your keyboard base is attached when you try to access the setting of auto rotation?

  It should be greyed out when attached and only reactive once detached.

  Sometimes, once separated, you may need to rotate the tablet to portrait. Then the automatic rotation of images button works.

  Have you tried this yet?

• Want 2 13 inch x: Envy x 2 auto rotation doesn't work after upgrade to windows 10. And touchpad gestures

  I installed the last HP Support Assistant for windows 10 and I have installed the updates

  Intel virtual button driver

  HP system event utility

  Updates cannot be installed without giving a reason:

  Driver Intel Serial i/o

  Intel Management Engine Interface (MEI) driver

  In display settings

  I checked the box ' allow screen auto-rotation.

  In Windows Update , I've updated with

  Update for Microsoft Windows (KB3074678)

  Update for Microsoft Windows (KB3074676)

  Update for Microsoft Windows (KB3081424)

  In Device Manager under the sensors

  The sensor HID V2 collection, works correctly

  SDO sensor V2, works correctly

  I did remove these devices and resettlement

  In the user account

  I created a new user with password. Auto rotation wasn't in this user

  But all this did not work. Please find a solution for me.

  On the gesture of the TouchPad:

  swipping inside the left is used to change the app, now does not work.

  swipping inside the use of right to bring out the charm bar / Center of the action, now does not work

  Yes. I found the answer here:

  http://h30434.www3.HP.com/T5/notebook-display-and-video/HP-envy-X2-13-j020CA-Windows-10-Auto-rotate-autorotate-now/m-p/5212887#M115445

  I tried to replace the device driver Sdo sensor V2 with the Simple device orientation sensor and rotation works exactly as it did on 8.1.

  For memory - very Sdo sensor v2 reported the device orientation, and the Simple device orientation sensor signals when the orientation changes. Must be a bug in Windows.

• Lenovo A2109 auto-rotation feature does not

  When I go to my auto rotation feature setting is dimmed and does not allow me to rotate the screen. Is there a way to fix this?

  Try to flip the switch black bit on the left side above the volume knob.

• Cliq: No automatic rotation when the load

  So, I hope that it is easy and the operator error, but I found that my auto-rotation of the screen does what he wants to when the phone is charging. I will notice you that when I take the camera, that he seems to always want to orient horizontally when I'm holding the camera vertically. Everyone has noticed this, is there maybe a reason for him and how to fix it? Help?

  
  

• HP revolve 810 G1, Windows 8.1, screen auto-rotation of images does not work

  I'm sure I can't be alone in having improved my G1 810 turn Windows 8.1.  However it is therefore more useful tablet as the rotation of the screen does not work.  The auto spin button does nothing and after an HP engineer swapped botht huh card system and the button they said that the only option is to return to Windows 8 (original shipping OS).

  Really, this isn't a usable solution when you want the new features of Windows 8.1 update.

  My G1 of 900 ElitePad works well on Windows 8.1.

  Can it really be difficult to get the drivers right and tested?

  Someone at - it a Windows 8.1 working solution?

  Hello

  decommissioning of the Bios to F.44 and auto-rotation should work again (for me it worked).

  I found this working solution myself, HP could not help me anyway.

  Be aware, that the Bios F.44 didn't put heat-settings update as F.47, so you'll have a noisy fan

  HP couldn't tell me when there will be updates of Bios or drivers updated.

  to ensure that automatic rotation is also running Windows 8.1.

  Hope this information helps you...

  Kind regards

  Alex

• Iconia tab a700 auto rotation does not

  Iconia tab a700 will not allow the auto rotation screen.  When pulling the top menu, tried to select "auto rotation" but it does not work.  Any suggestions?  Thank you!

  Close the volume buttons, there is a little switch, please check if it is in the unlocked position.

• tm2t 1000 auto-rotation

  I had business with the help of HP since a month now on automatic rotation of the screen show.  I'm curious to know if it's really a defect or just a bad design.

  Problem #1:  When I flip the back cover in Tablet PC mode, I expect the screen to rotate automatically in portrait mode.  Mine does not work.  He remains in landscape.  I have to press the button on the cover to get it to run.

  Problem #2: In tablet mode, I prefer "secondary portrait".  In this way, the bezel (which is the heaviest part of the Tablet), is resting in my hand... which actually feel lighter.  By default, the first position is portrait primary school.  So, I went to control panel-> Tablet PC settings and clicked on the link "orientation."  In the options, I disabled the primary and secondary Landscape Portrait.  What I expected now, when I press the button, it alternates between standard landscape and portrait favorite.  Instead, it does not take into account these parameters and turns to all 4 positions.  So now, when I want to make the portrait, I have 3 times press the button to do it where I want.

  Problem #3: After I get to secondary portrait, if I plug in the device it in (all in tablet mode), he returned to primary landscape.  Again, I must press the button 3 times to get it to where I want to.  :-(

  I've been a user of Tablet for about a decade.  I recently replaced a version of Acer of 7 years.  The old Acer was so much more usable than this one.

  I deal with support and they seem to think that it is faulty hardware.  For some reason, the first time I sent it, they replaced the keyboard.  Seems random to me.  He always behaves in this way and they want to send me new.

  Can someone tell me if this is how your Tablet?  I'm curious to know if it is defective or general bad design.  My hunch is this one.

  The fixed!

  http://www.touchsmartdevzone.com/forum/thread/2919/for-HP-TouchSmart-TM2-only-fixes-and-updates/

  Bravo for the link above.  Here are the steps I took to make my portrait of auto rotation for secondary display:

  1. I uninstalled quick launch button software
  2 restarted
  3. I googled: HP QuickLaunch 6.40.12.2 L and found a direct link to an older version of the software.
  4 installed
  5 changed Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Hewlett - Packard HP Quick Launch Buttons\Schemes\Default\8526\Tablet_Docked_Display_Orientation = 2

  where

  0 - primary landscape
  1 - seconday portrait
  2 - seconday landscape
  3. primary portrait

  6 reboot

  Now my screen automatically rotates secondary portrait in tablet mode.

  WARNING!  As I test it... it seems that my screen rotation button no longer works.

  I'm perfectly content with that because I never want my primary landscape screen when it is a laptop and the secondary portrait in the form of tablets.  I can still rotate the screen preferably video editing if I had to.  According to the link, you may be able to keep the functionality of the button by just copying on a particular DLL from the older version of the app.  I can try it eventually.

• ACER ONE 10 don't auto rotation

  Hello...

  I have a brand new 10 an Acer with Win 8.1 pre-installed.

  My new Acer one 10 don't auto rotation even when I re - install driver Acer support G-sensor.

  Can someone help me? Thank you

  Jaya

  You may have a hardware failure with motion detectors. Contact Acer support for your locale.

• Auto rotate problem

  Hi guys, I recently noticed that my screen does not respond to landscape mode when I tilt the phone... Auto-rotation is enabled, I've never been there before... I see ppl also had this problem, some with the update... What can I do? Thanks in advance

  Hey guys, I rebooted the phone until it vibrates 3 times and now it works again I hope that the problem will not recur... I'll keep guys updated if something ever happen again

• BlackBerry Smartphones Dtek50 auto rotation question

  Hello community,

  my old Dtek50 of a month, sometimes stops auto rotation toggle turn same auto is on. I checked the settings-accessibility - auto rotation... is on. Device settings-display-when is turned isn't properly adjusted on do rotate the contents of the screen. I did the test of the sensor with the expert virtual Blackberry and the sensor works very well. I tried with a game using the sensor and everything is ok. A simple reboot solves always... but it's a bit boring.

  Last week, it happened twice. I noticed this problem after update from September.

  Anyway, today I did a factory reset... I'll monitor the device without having to install the apps I use generally.

  Has anyone else experienced this problem?

  Auto rotation problem solved! As I said in my previous posts my sensor has worked well (and so I have is maybe a software problem, kernel?).. .so I tried a few apps from the game store: the only one who's really works: "auto rotation to lie down". For those who are facing the problem just install the app and give the requested permissions. Works like charm! Glad for not having sent the smartphone for repair!

• SHIFT OF MARGIN WHEN PRINTING OR EXPORTING

  When I print a document, the page margins will go through about 1/10 ". With portrait orientation, it is a change of left/right where the left margin increases by 1/10 "and the law reduced similarly. With landscape orientation margin increases and decreases from the bottom.

  DOCUMENT FORMAT

  1 page

  uncontrolled facing pages

  all bleed & slug set to 0

  all margins: 0.5 "

  PRINTER SETUP

  Page position: centered

  Use Document bleed settings: on

  I get the same results when you print to a different printer.

  I get the same results when you create a PDF file in the file menu: Export/Adobe PDF (Print). The pdf file appears centered on the screen, but printing the results of paper at the same post.

  Using InDesign CS5.5 (7.5) VICTORY 8.

  Help, please!

  Got your files, and I made two changes to help test: I added a pair of rules that run from margin to margin, centered on the page (to be compared with a flange) and added a text label to show which quadrant is at the top right.

  I did an export fast in PDF format and printed on my Samsung printer cheap (I'm currently not at my office), as well as direct printing of ID, where I am able to print vertical and 180 degree rotation. I pulled half a dozen or so prints, and they are remarkably constant for an inexpensive printer. The PDF and print native standing are as close as I can say the same, and both asymmetric so is weak and slightly turned the page (perhaps around 1 degree, which is probably due to the study not being loaded perfectly square, or be cut out of square).

  Printing of rotation is that which is important. It also aligns biased by the same amount, but on the opposite side. This is confirmed by putting two overlapping developments oriented as they were leaving the printer and looking at one on my improvised (a window) light box. They show without offset to one another. Facing the same direction up/right there is a global offset horizontally and vertically about de.125 inch sur.0325. The real shift for each page would be half of those amounts. It is in performance expected of a desktop like this, printer +/-.0625 in both directions.

  Rotation test confirms that the problem is the transport of paper in the printer, but not the file. I see similar performance on my very expensive Xerox Phaser 7800 in the office, with small amounts of derived from sheet to sheet on a long term (a real pain when printing business cards). It's just the nature of the transport mechanism to be a bit. I don't know if your HP has the ability to move the image on the sheet by the driver. If this is the case you can try that, but don't expect perfection.

• Photo auto rotation to importation into LR3?

  Hello!

  When you import directly from a card in LR3, vertical pictures are displayed correctly in the library, but JPEG files are not turned in the file system.

  This isn't a problem if you change with CS5, or export the photos. In these cases they are handled appropriately.

  However if you change by something else (in the filters of my Topaz case via Topaz Fusion Express), the pictures are not properly turned.

  Context: W7x64, LR3, cameras (EOS5D, G10) set for auto-rotation 'on '.

  Any idea on how to solve this problem?

  Thank you very much!

  Jean-Paul

  John Paul,

  JPAdans wrote:

  ... but the JPEGs are not turned in the file system. ...

  1. Are you talking about the JPEGs from the camera or those exported to LR?
  2. What do you mean by "in the file system" (explore thumbnails)?

  Gossweiler beat

  Switzerland

• How to get Firefox to ignore the status of liaison visits when printing?

  How to get Firefox to ignore the status of liaison visits when printing?

  When I print something, visited links are a different color than unvisited links.
  Is there a way to make the color even when printing?
  (without changing the story, or how things look on the screen)

  If there isn't a way to do that, how about this by adding as a feature?

  One way to do would be to create style rules customized for the printed output that hardcode the link colors for all of the printed output. Firefox supports two ways to proceed: a file userContent.css that you create in the folder settings, and a custom stylesheet applied using the Stylish extension.

  However, 'one size fits all' could lead to unreadable results or ugly on some pages. If an add-on that can do adaptive way would be better. I do not know if someone has created a.

  For sites that do not require a login and that are not personalized, you could launch the page in a private window (right click on the link > open in a new private window or copy the URL and then Ctrl + Shift + p, then paste it in the address bar and enter). Because private windows have their own history, the print should not reflect the history of your regular windows.