'Auto save recovery information' not functional

Similar Questions

• Re: Satellite C855D-13N stuck on auto repair - recovery does not work

  Hi, guys

  My Toddler press the Start button and keep the key all the keys on the laptop before her start and was suddenly cut off and I try to restart again now is stuck on auto repair

  I forgot to create a recovery disc, so I order a Toshiba, and I received it yesterday starting from f12
  I did put the cd n ° 1 and keep saying missing files error

  here what it says on the laptop (TOSHIBA SATELLITE C855D-13N) 3 MONTHS

  * Your PC needs fixing *.
  * This operating system could not be loaded because a required file is missing or contains erreur.*
  *: file: fwpkclnt.sys*
  * error code: 0xc00000e9 *.

  * you will need to use the recovery on your amovible.* installation tools
  * If you do not have any media (such as a disc or USB device) contact your system administrator or the PC manufacturer *.

  * Press F8 for commissioning setting *.

  When I press F8 nothing happens

  Can someone help us out please
  Thank you

  Hello

  The message looks like the laptop will not boot the disc.

  The question is: is this a problem with the new recovery disks, or perhaps with Notepad

  To be honest, I think his recovery disk problem, and maybe you will need contact the drive vendor to replace the recovery media.

  But before that, try this:
  Switch on and press F2.
  Now you should be able to access the BIOS. Set the CD/DVD device in the first starting position here. Also, to clear the safe boot option from the UEFI CSM.
  Now to boot from the recovery disc.

  Would be interesting to know what is happening

• When I try to open my file saved PREL - Adobe Premier elements 11, it starts as usual and then "the project appears to be damaged, it cannot be opened. But when I try to open the same file (but not update) of 'Adobe Premiere éléments Auto-Save' it opens

  When I try to open my file saved PREL - Adobe Premier elements 11, it starts as usual and then "the project appears to be damaged, it cannot be opened. But when I try to open the same file (but not update) of 'Adobe Premiere éléments Auto-Save' it opens as usual.  What can I do to be able to open it?

  Good luck to the project is corrupted.

  Be happy, you have an auto save, even if you've lost some work.

• Function "Auto-Save".

  The "Auto-Save" function is already well. But the problem is that often, it will fail to retrieve the document "non-registered" after the accident. I know that I use a weak configured computer, whice ticks to 3.30 GHz.

  And it would be appreciated if someone recommend me some high configuration. I want Photoshop CC to be smooth to work. Thank you

  Hi PSDgeek,

  Here's the article you can do refers to minimum technical specifications for Photoshop CC: Photoshop system requirements

  See this article for Photoshop optimization on your current computer: Optimize performance Adobe Photoshop CC

  In addition, you can save your document at different stages on a regular basis in Photoshop so that you don't lose your job due to the accident.

  Kind regards

  Claes

• "Bookmarks and history system is not functional" with corrupt files found by Avast and slow loading Web sites ONLY in Firefox

  Firefox is the only browser that allows me to connect with my microphone. I need to use this feature for an online class. Earlier tonight, the message invites me to grant or deny permission to site class to use the microphone stopped appearing and without this registration only will pick up all the sounds and I can't save anything.

  I tried to quit and restart Firefox. I had a few extensions in use at the time, in particular Session Manager. The allow/deny message would not always appear, then I restarted my computer.

  Now when I open Firefox, I see the message error "the bookmarks and history system won't be not functional. In addition, the browser loads websites extremely slowly; It takes several minutes to load each page or for me to be able to click on anything whatsoever (bar URL, menus, etc.) my other browsers (Internet Explorer and Chrome) are functioning normally and loading Web sites at a normal speed. I tried to download the latest version of Firefox, but it does not solve anything. I also tried to restart the computer again, but that didn't help either.

  I ran my Avast software system check, and it has mounted as the following files under "C:\Users\ (me) \AppData\Roaming\Mozilla\Firefox\Profiles\Irozixj7.default ' are 'damaged and unreadable ':
  -cookies.sqlite - shm
  -cookies.sqlite - wal
  -localstore.rdf
  -places.sqlite - shm

  There was one more problem on the analysis, but it is probably not relevant: the file "C:\ProgramData\Microsoft\Windows Defender\Definition Updates\{9A2C6FA7-E04E-4819-B86A-8363A9D1E42A}\mpengine.dll" it says "the system does not have the specified path. When I tried to follow the path shown, one of the files (I can't remember who) said something along the lines of "you can't access this folder, you want to allow access to this file permanently? I said yes and was able to access the folder.

  I tried to add the extension in Maintenance of places, but the speed is too slow to download anything. Trying to access any results of the menus in the Explorer freezing for several minutes then thaw but with the menu still unopened. As a result, none of the solutions found here (https://support.mozilla.org/en-US/kb/fix-bookmarks-and-history-will-not-be-functional?esab=a & as = aaq) seem to work.

  My questions are the following:
  -Is it possible to understand what caused the problem in the first place?
  Is there a way for me to fix it without losing my bookmarks and history?
  -How can I prevent that from happening again in the future?

  First of all, I recommend you backup your Firefox settings in case something goes wrong. See back up and restore the information contained in the profiles of Firefox. You can copy the folder of your Firefox profile together somewhere outside the Mozilla folder. To quickly access this folder:

  Help > troubleshooting information > "view file" button.

  Then, to keep this file open, exit Firefox and try to move "damaged and unreadable" files to another folder. With the exception of localstore.rdf, which stores the positions of windows, toolbar tools and other data non-essential customizations, other files appear to be specific session files that we hope, are not critical. If you restart Firefox, should he behave more normally?

  If this is not the case, try to create a fresh Firefox profile. It will be the Flash plugin, which is the control of sites use usually to connects to your camera or microphone and other plugins, but otherwise will be a new configuration. This article has the commissioning steps in the Profile Manager: use the Profile Manager to create and delete profiles Firefox.

  If the sites are functioning normally in the new profile, you can import your bookmarks from your old profile, as well as the copy on the other files that do not appear to be the cause of the problem. Some trial and error may be needed to determine that. This article has a few tips: recovery of data from an old profile.

  If the new profile is not better, you can exit Firefox and use the Profile Manager to return to your original profile.

  Any improvement?

• Upgrade to Mountain Lion, but CS6 questions about Auto-Save need answers...

  Hello

  I am the Mountain Lion to all my "non-critical work, but I am still under the last Snow Leopard on my main desktop computer, running CS6 Design & Web Premium. I avoided the switch primarily because of the automatic backup feature that Apple placed in ML. I have not found a satisfactory answer anywhere on the web to this fundamental question... is auto-save a problem, like Apple, implements with CS6 and work on images?

  In particular: 1. I regularly work on very large files, 4 GB + size, and I don't wan't the peformance hits associated with constant economy, 2. I make changes to the images, numbers, cropping, color correction, etc., so that I can prove to jpg for clients or myself. More images 'intermediate' and not planned to be saved. I don't want to downsample an image, flatten it in order to create a jpg for evidence and have it replaced the original image in layers, the high resolution by mistake. This happens with photoshop or Adobe don't avoid the auto-save that Apple uses?

  I have all the latest gadgets to iOS and it becomes heavy enough to manage multiple sets of iCloud info, etc without being on ML. I want to make the transition, but at the cost of loss of work, etc. Anyone with experience on ML & CS6 can give me any input on the matter? And this also applies to all other Adobe applications in CS6? I'm constantly doing minor changes and the changes that I usually have "undo" of and want not saved.

  Thank you.

  
  Craig

  Auto save (information retrieval) save a temporary file that will only be useful if you have an accident.  It does not record in your file.

• Disable auto save

  Hello:

  So every time I open a number (or other Pages) of the document and change it, it automatically saves this file changed in the original file. Currently to really do what I want, for example an invoice, I duplicate an old then change that.

  Is it possible to change this behavior, so it behaves more like office, where the changes are not applied until I have save or save as?

  Thank you

  HI Iñaki,

  Do your Save as... immediately on opening the document, by using a different name than the original. Automatic backups are then applied to the new document.

  Or make a copy empty charge you and save it as a template. Models open as a document without title and not auto save until you actively save the first time. By saving the document does not change the model.

  I had still recommend save immediately after the opening of the model - automatic backup is a useful feature, but only if it is enabled, this happening only when you do this first record.

  Kind regards

  Barry

• Satellite S50-B-12Z - recovery does not start

  Hi guys.

  I have Toshiba Satellite S50-B-12Z
  I can't start the recovery.

  When I press the 0 key starting system, information about recovery happens.
  I answer YES to the question if I want to continue the recovery and after this system appears as normal takes just a bit longer.

  What will happen? I remember I managed to enter the recovery menu once but can't remember how.

  I taught maybe I deleted the partition by mistake, but partition magic shows he's still there (not used status).

  Any ideas why menu recovery will not come to the top?

  Hold F12 for power up to display the start menu.

  If "HDD Recovery" is not found, or its load fails, this means that the recovery partition has a problem.

  You can order on the site of Toshiba recovery disks.

• Yet WT8-A-102 screen auto rotation after update not

  Yet WT8-A-102 screen auto rotation after update not
  I have re installed the drivers

  Now the Tablet does not start-> error - system thread unhandled exception

  The system Thread Exception BSOD error unhandled in Windows 8 arises especially due to incompatible or old graphics card drivers.

  I assume that you have installed drivers that were not compatible
  To solve this problem I recommend you choose the Windows repair procedure

  You should start the tablet in the menu boot device
  Press on and hold the flight button + and hold also the power button until the device turns on and the boot device selection menu appears.

  Now you should be able to choose the option of HARD drive recovery.
  Then choose troubleshooting and got advanced options
  Here, you should be able to repair the system automatically.

  Useful info:
  http://APS2.toshiba-tro.de/KB0/HTD4103K90000R01.htm

• E2E34AV: HP ENVY 15 t Quad - recovery is not complete

  Hello

  I got the blue screen. I try to get back with Flash Drive several times, ultimately has noticed that the hard drive is broken. I got the new hard drive and started the process of recovery with flash player. Laptop shows that Recovery is not over. He showed me below error:

  ChkErrBB.CMD: Detects an error in the PININST_BBV.

  ChkErrBB.CMD: Check C:\system.sav\logs\BurnBootWarn.log

  ChkErrBB.CMD: or, visit c:\system.sav\logs\BurnBootMerge.log

  --------------------------------------------------------------------

  Critical error condition has been detected to BBV1...

  See the following file, if it exists.

  -c:\System.sav\Logs\BurnBootWarn.log

  -c:\System.sav\Logs\BurnBoot.log

  Go to WinPE 2ndCap and dialog box [Recovery Manager] of Imcomplete.

  because the RM dialog may appear on [start] screen on Win8 environment.

  customer may not notice that RM already shows the error dialog box.

  -------------------------------------------------------------------------

  There might be an unexpected reboot during the PBO clean or last...

  The process will cause panic CTO because the image isn't normal...

  _____________________________________________________

  I had the same error before after 6 months of purchase. My laptop is fixed by HP support team. A paper I got from HP says HDD and RAM replaced to solve the problem.

  Warranty expired a couple months back. I'll ask experts to guide me how to solve the error above.

  Thank you

  Vincent

  Hi @Venkat_N,
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked in your question on your HP ENVY 15 t-j100 Quad Edition CTO Notebook and problems with the installation of the new HARD drive. I would reinsert the hard drive to make sure that all connections are tight. I recommend to restore the default BIOS settings. You could restore the BIOS withthis document by selecting the reload the default BIOS settings. In this way, it will look at the hardware installed on your laptop.

  Here is a link to test the hard drive in the BIOS. If the BIOS does not see the hard drive you can not install Windows.
  
  Please let me know how it goes.
  
  You can say thanks for trying to help, by clicking on the Thumbs Up below! .
  
  Thank you.

• System - F10 recovery does not

  Hello.

  I tried to fix a HP Media Center M7380.

  The XP operating system was damaged during an update of the operating system, it could not start and has been reset permanently.

  At first, I was able to access Recovery Center through F10, but didn't try it until I got a decent backup of the data on the disk.

  Now that I managed to backup of the C: drive, the F10 boot option no longer works, it shows just a black screen.

  The HP Recovery partition is intact, how to create a recovery disc without the installed XP and without the F10 at startup?

  Thanks for your suggestions.

  Dave...

  I SOLVED THE PROBLEM, recovery is much better than I hoped.  I will update this thread in hopes that I can be useful to someone else.

  I tried many suggestions provided by the HP site, Google, "10 things to do when Windows XP does not start" et al., without any hope of success.

  With the help of the "Hirens boot disk" I finally discovered that some vital XP files were missing from Windows.  I think that the owner of the computer (a friend) may have attempted to install the software or update the system when it crashed, but I don't have the details of exactly what has been done.

  -The PC would not boot in any mode.

  -The recovery disk provided was for a completely different PC and a different version of windows

  -J' tried to start the recovery console from another drive to install XP, but the recovery was not a permitted option

  After careful consideration and several other solutions attempted, the following managed.

  1 - use the Hirens boot disk to start MiniXP.

  2 - Open a command line.

  3. type C:

  -Press enter

  4 - Type cd windows

  -Press enter

  5 - type "CD Creator.exe" that must be typed with the quotes and space

  -Press enter

  At this point, that an application window for recovery disc creator appeared, option buttons are strangely absent, but I used the key entry instead.

  I was prompted to select 11 CDs or 2 DVDs, I went for 2 DVD

  Two hours (approximately) later I had the necessary recovery discs

  I opted for a recovery of the system rather than the Format and reinstall.

  It completed successfully.

  I made sure that the version of Norton AV trial provided worked.

  I have indication internet, downloaded and installed XP SP3 and all other updates of the system.

  User data (photos, documents, etc. was recovered by)

  -Rename each individual user folder in "C: Documents and Settings" to (for example) Dave143 to Dave143SAVE

  -Creation of the user of the control panel.

  -Login under the user to build (Dave143) user folder "C: Documents and settings".

  -Restart in safe mode and copy the data from the Dave143SAVE folder folders in the Dave143 folder.

  It took me all night for a week, but now I'm happy with the result.  I managed to save several gigabyte of their family photos!

  Don't forget, before you try anything at all, your first priority should be the backup of data.

  Good luck!

  Dave...

  Message edited by Dave143 on 06/11/2009 14:11

• Cannot use, "save under" to save the information in the missing desktop icon

  Whenever I try to use the, "Save as" command in Word 2007 or the appearance of Windows 7 theme page to save on the Desktop icon on the left side of the page, it is impossible, because the Desktop icon disappeared completely.

  This means I have to record information in example Library\Documents, why?

  Anyone solve the problem?

  How to reset the Windows path, which should allow me, "save under" information and possibly other paths to the desktop (icon)?

  The desktop icon is normally located in the "Favorites" group at the top of the left pane. Click on the small arrow next to Favorites to show the links it contains.

  If she's really gone then you can put it to go back easily.  Open Windows Explorer, find your desktop folder, select it, drag it to the favorite icon to the top of the left pane, drop it on the Favorites.  Who put it there.  [He puts a shortcut on the desktop in the favorite group]

  Note that Favorites is extremely poorly named.  It has nothing to do with favorites, you are probably familiar with Internet Explore.  It's actually a set of shortcuts in whatever you chose to put files and its list is displayed in C:\Users\yourusername\Links if you take a look here.

• Acer aspire 5600U, auto repair, windows could not load correctly, restore is not started

  Original title: Mr

  Acer aspire 5600U, auto repair, windows could not load correctly, restore is not started

  Hello

  Here are the instructions Acer for recovery to factory settings, new condition.

  Select Windows 8.1 it.

  "Using Acer eRecovery application to restore your system or to create a recovery media.

  http://Acer.custhelp.com/app/answers/detail/A_ID/29934/~/use-Acer-eRecovery-application-to-restore-your-system-or-create-recovery-media

  ACERS use these keys for years.

  http://Acer.custhelp.com/app/answers/detail/A_ID/35232/session/L2F2LzEvdGltZS8xNDQ0ODg5NTczL3NpZC9jRmhXNC15bQ%3D%3D

  See you soon.

• Auto save back up creative cloud is broken

  Hello

  I was fumbling with it for a few days. It's great to have this proposed feature but since my last update to the desktop application, it doesn't seem to work. I spotted a post on April 21, 2015 where the recommendation by the Rio Khan had to UN install the desktop application CC and re install but when I try this, I get a message to the effect of CC cannot be removed because there are other Adobe programs that rely on it. I tried to copy in a link to the other post on the Adobe PP forum but it seems to hang when I try so here it's long hand: https://forums.adobe.com/message/7457869#7457869 . Is the Auto Save Save to creative cloud something that we feel may be invoked or should make us other arrangements until Adobe can ensure that it is solid? I notice that I can do it manually, but this isn't really how the feature is supposed to work. 

  Hi Danielle,

  Check the link for a list of the patches below.

  Premiere Pro CC 2015 update (9.0.2) | First work Pro area

  The automatic backup of creative cloud is still not fixed, but will soon be resolved.

  Vinay

• Adobe Acrobat App iPad: clear the AutoSave / auto save dei documenti Deselezionare

  Goodmorning, I have created a PDF file in Indesign CS6, then I open the document with the Adobe Acrobat application in my iPad for a PDF with modules edition. The problem is that when I have finished compilate modules and send the new PDF compilated in an email, I come home, the PDF is automatically saved, so I can't open another time because the modules are not empty. There is a way to delete the auto backup? Apologies for my English... Thank you! Alberto

  Buongiorno, ho creato a PDF in Indesign CS6, poi Ho aperto knew iPad con Adobe Acrobat by answer I moduli. POI finisco di answer I modules e spedisco it PDF at E-mail my it problema e che quando torno con sulla it pulsating in alto a sinistra mi fa auto save del documento, cosi is Shrek lo stesso PDF answer no no ho, the boom possibility I have modules sono gia compilati in precedenza. Esiste a modo by deselezionare save o auto an altro modo by ovviare questo lost? Grazie. Alberto

  Hello Alberto,.

  Acrobat DC IOS does not provide an option to turn off the automatic backup feature.  Sorry for the inconvenience.

  Would it be possible for you to make a copy of a PDF form in advance and complete the copy?

  ___________________________________________________________________________

  Adobe Forum translation content