Yet WT8-A-102 screen auto rotation after update not

Similar Questions

• Yet WT8-A-102 stops suddenly and updated the BIOS

  I bought a Toshiba still WT8-A-102 (not part no PDW09E-00100EEN) to the end of 2014. I upgraded from Windows 8 for Windows 10 Home Version 1511 without any problem in 2015.

  I use it for a limited number of applications - Office365 and navigation, generally with Chrome and Hola VPN to access certain geographically limited websites, for example TV channels, watch movies and content recorded from my TV (these are generally. TSV format); I run the free version of Malwarebytes and AVG anti-virus.

  I have two problems I can solve t.
  
  1 stop abrupt
  For a few months now, it always turns off suddenly, always exactly 30 minutes after the start. There is no warning, the screen goes black and that s it. You can immediately restart and continue as before, but the same thing will happen again after another 30 minutes. It happens that it s plugged in or on battery power.

  I can find no reason for this. For example:

  • It didn't happen when I've upgraded to Windows 10 but a few months later.
  • The battery does not turn down.
  • The Tablet does not heat.
  • It occurs regardless of whether you ve been using the Tablet constantly for 30 minutes or simply turn it on and let it idle.
  • Sleep and stop times are set to one hour.

  I ve looked at event viewer and the only things there are a few system errors showing which means nothing to me (a server is not registered within the required). Certainly, there is nothing that happens in the few minutes before it turns off suggesting a reason.

  Any ideas please?
  
  Update 2 BIOS

  I ve installed the different Toshiba updates available for this model. However, the update BIOS doesn t work. She is currently the version 1.60. I ve downloaded the version 1.80 for this model on the desktop. The zip file is bios-20150722112320. I extract it and it starts the process. The Tablet goes on to say it's reboot and then a panel will appear that says:

  InsydeH20 Flash secure
  Invalid firmware image!
  Press any key to reset the system

  It s a Tablet! While they want me to? I ve you press buttons - Windows and volume - but nothing happens. If I just leave it, it turns off after 30 minutes and we re back with BIOS version 1.60 and I can work as usual.

  Although this seems excessive, but suggestions please?

  Thanks a lot for any advice,
  John

  It seems that your problem is similar to mine. I'm having the same random stop downs https://forum.toshiba.eu/showthread...-Error-Code-10 also I have an error code 10 in Device Manager. The agenda called "Intel Trusted execution engine Interface"... are you facing the same error?

  I sent my tablet at the service of Toshiba, it has been over a month now and still waiting to be informed about the problem!

• HP revolve 810 G1, Windows 8.1, screen auto-rotation of images does not work

  I'm sure I can't be alone in having improved my G1 810 turn Windows 8.1.  However it is therefore more useful tablet as the rotation of the screen does not work.  The auto spin button does nothing and after an HP engineer swapped botht huh card system and the button they said that the only option is to return to Windows 8 (original shipping OS).

  Really, this isn't a usable solution when you want the new features of Windows 8.1 update.

  My G1 of 900 ElitePad works well on Windows 8.1.

  Can it really be difficult to get the drivers right and tested?

  Someone at - it a Windows 8.1 working solution?

  Hello

  decommissioning of the Bios to F.44 and auto-rotation should work again (for me it worked).

  I found this working solution myself, HP could not help me anyway.

  Be aware, that the Bios F.44 didn't put heat-settings update as F.47, so you'll have a noisy fan

  HP couldn't tell me when there will be updates of Bios or drivers updated.

  to ensure that automatic rotation is also running Windows 8.1.

  Hope this information helps you...

  Kind regards

  Alex

• Yet WT8-B-102 discharge while being closed

  Hello

  My Toshiba still WT8-B-102 performs 100% to 5% and less then 10 hours after being arrested (not the sleep or Hibernate). I use Windows 10. I can't tell what it looked like on windows 8.1 because after buying the Tablet I've updated to W10. I even did W10 clean install (with drivers from the toshiba site). During normal operation my battery lasts about 6 to 8 hours, so I guess there is nothing wrong with the battery itself.

  You have ideas, what is the problem? Some perhaps of settings in Windows?

  "USB Sleep and Charge" and Wake on LAN/keyboard drain the battery when the unit is off. Disable these settings in the BIOS.

• X 360: 10 screen Auto Rotation spectrum not working/Option Windows is not visible or available

  I installed 10 Windows through the microsoft app Everyhthing works fine except the screen rotation doesn't work at all. The option of power or only disable this feature is gray which means that you can't interact with it. Please help if you know the solution.

  OK I found the solution; Go to control panel > display > Change display settings then make sure that the "allow the screen to auto-rotation" is selected. It worked well for me

• Yet WT8-A-102 - USB for pc connection

  So I have Toshiba still WT8-A-102 and I want to connect it to my laptop via USB, I OTG cable micro usb to usb female, male-male usb cable, but still my laptop can not recognize me, so I need you to install drivers on my Tablet?

  Friendly V

  You n t need any additional driver
  If you want to connect this table to the laptop, you should not use adapters.
  The Tablet supports the micro-USB port.
  Use a cable / USB micro USB to connect the Tablet

• Erratic Yoga 11 automatic rotation after updating Windows 10

  Hi guys, wondering if someone else has the same problem and found a solution for me to try: after upgrade to Windows 10, 11 Yoga isn't run properly. I've unlocked rotation via the manual button and going in tablet mode and changing the settings. Nada. It is stuck on the orientation of the laptop. (This inability to change orientation defeated the entire functionality of a hybrid Yoga.) I rebooted once, and the autoration seems to work very well after that, either in tablet mode or a tent or mobile... for a while. Now he is again unlucky. I encounter this problem before the upgrade.

  Is it more permanent as possible to fix the glitch infinite reboot? Suggestions welcome. Thank you!

  Ok. I just installed the interface Foundation of lenovo thingamagig sytem and auto-rotation works now fine.

• Lenovo A2109 auto-rotation feature does not

  When I go to my auto rotation feature setting is dimmed and does not allow me to rotate the screen. Is there a way to fix this?

  Try to flip the switch black bit on the left side above the volume knob.

• Firefox screen blew up after update

  After updating, the design, layout and the text of firefox "blew up." It is too big.

  The only advice that I have always after the search has been trying to view > Zoom etc.,.

  Only, this changed the screen I was and is returned after a change to a new page, open a new tab or restart firefox.

  I need a permanent solution where the firefox screen is where it was before.

  Amendments of the code regarding the HiDPI support high-resolution displays have landed at Firefox 22 and later (bug #844604).

  You can change the layout.css.devPixelsPerPx and increase or decrease the value of 0.1 or 0.05 as follows to adjust the size of fonts and other elements in Firefox.

  • The layout.css.devPixelsPerPx pref is a string parsed in float value and allows you to adjust the dimensions of all elements (user interface and web pages) specifically (resolution 0.1 or 0.05).
  • Change the default value of-1 to 1 to make it work as in previous versions of Firefox (100%)

  Start with a value of 1 and adjust this value with 0.1 or 0.05 for finer settings.

  • Use values between 1.0 and around 0.5 to reduce the size of the items (do NOT go all the way to 0.05!)
  • Use a value greater than 1.0 to grow and enlarge the elements (percentage divided by DPI, % / DPI).
  • http://KB.mozillazine.org/about:config

  _{EDIT by Chris_ilias: to summarize:}
  

  1. In the address barof Firefox, type Subject: config , then press the Enter key.
     If the "this might void your warranty!" warning appears, click on I'll be careful, I promise! to continue.
  2. Search for the preference layout.css.devPixelsPerPx
  3. Double-click the entry and change its value of-1.0 and 1.0
     (you can change this upward or downwards if necessary, for example, 1.1 to 0.9).

  Note that the changes take effect immediately. To its default value, right-click the preference and select Reset.

  If the web pages must be adjusted after changing this pref so you can watch the extension Default FullZoom Level or NoSquint.

  • Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
  • NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

  This extension allows to adjust the font size for the user interface:

  • Theme font & size changer: https://addons.mozilla.org/firefox/addon/theme-font-size-changer/

• Yet WT8-B-102 - experience with Win10 updated?

  Hello

  Anyone has any experience with Win10 update for this model? Given many discussions here and my own experiences with update and wireless network card disconnected after (the reset default values to use again), I'm a little worried about the update.

  It was a month ago, so the two sides (Toshiba/MS) had time to provide updates of patches & drivers. So, I'm curious - is the update secure now? All things work out of the box (WLAN, camera) etc. ?

  Concerning

  Originally posted by LegionPL
  

  Hello

  Anyone has any experience with Win10 update for this model? Given many discussions here and my own experiences with update and wireless network card disconnected after (the reset default values to use again), I'm a little worried about the update.

  It was a month ago, so the two sides (Toshiba/MS) had time to provide updates of patches & drivers. So, I'm curious - is the update secure now? All things work out of the box (WLAN, camera) etc. ? I have

  Concerning

  Hello.

  I've updated WT8 my wife a week with no problems at all.

  Take note, however, it takes a LOT of time. Set aside the best part of the day.

  That's what I did on the advice from my research.

  Plug your tablet in socket.
  Check Windows update for new updates and install them. It is the same for all the other programs that you favor.
  Uninstall all malicious programs you may have installed (compatibility issues)

  I also disabled my anti virus program.

  A scope of hand a 8gig USB if you want to create the boot USB installation.
  You don't need to do it immediately as you can do it at a later date.

  During the upgrade, you will be asked if you want to upgrade this computer or do a clean install. I chose the update this computer and transfer my settings (or words to that effect).

  If you want to take the path of own tinstallation, you must first upgrade your operating system current version OS 10 and then when this has been done you need to go through the entire procedure using the boot USB that you created earlier or to creat now.

  The main thing to remember is to be patient, very patient, as the upgrade almost takes care of it's self. Read all the instructions carefully before you click.

  The keyboard that you should select if requested we international. I inadvertently clicked on something else and more later found that some keys on my keyboard had the mind of their own, I got that without too much trouble

  Go for it, I think you'll like the new OS 10. The only downside for the new OS, it's that you may incounter problems driver with installed programs. I think I can live with the Kindle.

  I hope it is of some

• Satellite P500 - screen remains blank after updating BIOS 2.90

  I installed the new WOOD update through the station of service and after restart, the screen remains blank (out of service)?

  Any suggestions?

  Hello

  And on the external monitor you see a photo or not?

  In my opinion, something goes wrong during the update of the BIOS, and so the entire computer doesn t start anymore. All updates are pre-tested by Toshiba, so I doubt that only the screen isn't working anymore.

  You should try to remove the battery and unplug the AC adapter for an hour. Then install the battery and plug in the AC adapter. Make sure the battery is fully charged and then try to start your laptop.

  It's working now?

• End of 2012 Mac mini won't go beyond screen bar startup after update 10.11.4

  Hey all,.

  I'm puzzled.  I have a Late 2012 Mac mini, upgrade 10.11.4 yesterday, after the computer restarts, it was stuck around 60% on the progress of startup screen.  I let it go for 12 hours, nothing.  The screen fell asleep, and when I woke up it I had a mouse cursor which would pass but nothing to use it with.  When you try to start in safe mode, I get a little further, about 95% and then she stalls.  When booting into single user mode, it stops at "pci break: SDXC.  I fixed the disk with DiskWarrior on the repair disk, no help.  Any help would be greatly appreciated, getting very frustrated and I would like to solve it, instead of doing a restore.

  I forgot to add, that when starting in Diag mode, I wonder for a wifi network reach, I do then it's right there.  Do not enter an IP address.

  Thank you!

  -Anders

  The Diag mode gives me an error-2002D.  Looks like I have some errors going on here :/

• Windows 7 32 bit Auto reboot after update Nag

  Hey guys...  Why my pc reboots after Windows updates?  The HORSE appears but never does the County down and restarts.  I check group policy and "No Auto restart with logged on user" is not enabled (still set to not configured).  I checked Regedit HKEY_LOCAL_MACHINE\SOFTWARE\POLICIES\MICROSOFT\WINDOWS\WINDOWSUPDATE\AU\

  NoAutoRebootWithLoggedOnUsers is undefined.  We have wanted this to put on for our users, but can't seem to make it work.  As I said, the HORSE appears and you can postone, but if you do not touch the pc never restarts.  FYI, we use the server 2008R2 Standard GP.  Thank you

  Hello Makinsey,

  Thanks for posting your question on the Microsoft community.

  The question will be better suited to the audience of professionals on the TechNet forums.

  I would recommend posting your query in the TechNet forums.

  TechNet Forum
  https://social.technet.Microsoft.com/forums/en-us/home?category=WindowsServer

  Thank you

• BlackBerry screen 10 flashing after update to OS 10.3.1.1565

  Hello

  I've updated my passport blackberry software yesterday to version 10.3.1.1565, and after the update, something was wrong with my phone. Everytime I open request for example photos, BBM messages etc. quick flashing screen... sometimes the screen turns white and then starts flashing again. Any help for this problem? Thanks guys...

  I tried to erase the data and restore my phone to the setting of origin., far, the problem has been resolved.

• Moto E auto-restart after update to 4.4.4

  Hello

  After the Android 4.4.4, update my phone is is restarted as part of operations. This number of times these days. Is there a problem with the update?

  Let me know what needs to be done.

  Kind regards

  Raj.