Auto shut-off will not

Similar Questions

• Auto shut off does not work on Windows vista.

  Original title: Auto shut-off

  I have a HP Pavilion Entertainment PC / Windows Vista and automatic closing does not work.  He tries to stop, but it is not...

  Hello

  Have you tried the command to stop as suggested by me in my previous post dated May 31?
  Check if you find an error recorded in the event viewer.
   
  Open event viewer
  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer
  
  Step 1: Also try to shut down in safe mode and see if that helps.
  Reference:
  Start your computer in safe mode:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  
  If you are able to stop in safe mode, perform the clean boot and see if that helps.
  Step 2:
  Here is the link:
  http://support.Microsoft.com/kb/929135
  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.

• Camileo H10-auto shut-off

  Hi all

  I recently (like, a few days ago) bought a Camileo H10 camcorder and I have a few problems with the following: apparently the camera turns off after a certain period of time without any user interaction, + it is record +. Now, I know that its got one-setting auto power off function of which it turns off after 3 minutes without any button presses when it does not, and is not a problem. But IMHO it should just disable itself while it's video recording, even if there is no entry user for some time. Worse still, when he does this, he is not even save what she had registered so far. It just seems to lose ALL the data that she had recorded.

  This happens after about 20 minutes of recording, or more and makes it pretty hard when we want to check us for a long time (ish) without a person to act the role of the cameraman... Now is this a problem with the type of SD card that I use (is a no name brand, but he says "class 8" there, and if the class 6 is 6 mb/s then class 8 should be 8 mb/s and therefore even better, shouldn't it?) or is it a 'feature' to save the battery, and if this is the last is it possible to disable it?

  Thanks in advance for any response

  It shouldn't power off during recording, while there might be a hardware problem that requires a repair. Maybe the battery is worn out? How old is the battery?

• MG7120 auto shut-off

  I've enabled auto stop 30 minutes, ECO settings, but the printer does not stop automatically. Wondering what I am doing wrong?

  Thank you

  Hello.

  The automatic timer resets if a print job is sent to the printer or if the device receives a signal or some kind of communication with a different device.  If the printer is used on a network, security or monitoring utility port can ping devices on a network.  This input signal can stop the timer.

  If the problem persists, you will need to manually power off when the unit is not used for an extended period of time.

  It has not responded to your question or problem? Find more help contact us.

• Aspire turns off will not

  Hello everyone - this is my first visit on behalf of my daughter.  Its Aspire 5830 T suddenly began to refuse to shut down or restart. It will sleep, hibernate and change user. I guess it's a software problem - can anyone help, please?

  Relief! Cracked with system restore.

• Journal print - Photosmart 7520 fax auto shut-off

  As a topic, how to prevent faxes print log after each shipment?

  A previous answer for another model is not applicable for the 7520.

  TIA.

  Update... No joy with the FW update, so a new printer is provided.

  I hope that I just got a bad first & the replacement will be just fine.

  --------------------------------------------------------------------------------

• Auto shut-off

  Dear HP

  First of all thanks for spenting time read this mail...

  I have

  HP Compaq Presario CQ71-210SV (VF413EA)

  My operating system is windows 7 ultimate x 64-bit

  I have this laptop for 2 years without any problem... Each month 1 clean it then I'm sure there are no dust inside... It worked perfectly... I also have a Council with the fans, so he isn't getting overheated... One day, he got an error that my battery is not good, so I replaced it... All were very good until he started to be overheating (47 with speedfan) fan works but I don't think he has a lot of power... When I realized that the fan may be the problem, I CHANGED some things on the power management so that the fan may operate at full power... IM really desperate cause it always stops when I opened 30 minutes without anything to do and when I open youtube or internet stops really quick about 5 seconds from the time I opened it... I don't really know what is happening...

  Thank you very much, I am waiting for your answer

  Best regards

  Chris

  Dear rajeshmadhavan
  Thanks for your response
  Also when I leave it in the BIOS it doesn't stop if this is not the motherboard... and drive hard test and the test of the ram are clear

• vista computer shuts off if not touched after ten minutes

  After putting password back in it goes back to the page it is on when he was inactive. It is in hibernation or something?

  After putting password back in it goes back to the page it is on when he was inactive. It is in hibernation or something?

  You have a configuration of "power management" in your computer?

  Yes or no, you must check to see what your configuration plan of power, if necessary.
  Start button > Control Panel > view clssic > Pow Options > create a powerp plan > choose 1 of 3 > next >...
  Turn on disable display > set the time when display goes off if idle... by clicking the pointer
  on the computer was able to sleep > set the time to 1 minute forever... .by clicking the pointer
  Click on create when finished.

  t-4-2

• Switch to the second tray auto shut-off

  My HP Officejet Pro 8600 began pulling Tray 1 tray 2 is empty. I don't want it to do this, as I have envelopes in Tray 1. I change all the settings, it just started this making unannounced. I need to know how to set where, when tray 2 is empty, it just give the message 'out of paper '. Thank you.

  Hi @Rebecca1978,

  Welcome to the HP Forums

  I think I found the answer that you are looking for, and after watching, I understand why you came here for the answer

  Page 32 of your printer user's Guide , you will see sandbox Configuration settings, and in the I want... table that you want to follow the instructions of the medium-sized portions to lock Tray 1, forcing the tray 2 to say out of paper when it is empty rather than pull from Tray 1.

  Hope this helps, have a great Halloween!

• reorganization of records items auto shut-off

  using Windows 7

  in the folders I want to drag folders rarely used for the bottom pane open the folder and leave frequently used at the top items
  There was to be a record setting called "auto pair elements" but it is nowhere in the folder settings... so how can I customize my files...?

  Hello

  Folders in Windows 7 are self-organizing and this behavior can be disabled by using a setting in Windows 7.

  As a workaround might take a look at the answer given in the thread below:
  Sort order of the records

• Drop-down menu auto-remplit but will not be updated if you change the selection?

  Hi all

  I'm having a problem with the auto fill to a text field based on the selection in a drop-down list. While the script is running in the first case, if I go back and change my selection as result calculations be updated based on the new selection.

  I used the following script Auto Fill a field of text (called "stndwatt") based on the drop-down menu selection. The drop-down field is called "ProductLineOne":

  var v = this.getField("ProductLineOne").value;

  If (v == "3000K T10 (Tube) '") event.value = "21";

  else if (v == "4000K T10 (Tube) '") event.value = "21";

  else if (v == "5000K T10 (Tube) '") event.value = "21";

  else if (v == "6000K T10 (Tube) '") event.value = "21";

  else if (v == "HBZ (100W Bay)") event.value = "100";

  else if (v == "HBZ (150W Bay)") event.value = '150 ';

  else if (v == "HBZ (200W Bay)") event.value = "200";

  
  

  The text field ("stndwatt") is actually hidden and is only required to be part of other subsequent calculations - I don't know if this is a factor?

  
  

  If you can please advise what I can do to make the field to update when a new selection is made in the drop-down box, it would be much appreciated!

  I'm just a beginner so please keep this in mind

  Thank you!!!

  You must make sure that the field calculation order is correct. See

  as it is a calculated field that is used in other calculations, you should

  Make sure it is higher on the list compared to the fields that use its value

  for their own calculation, that is to say that its calculated before them.

  You can set this order in form editing mode, via the game of - other - jobs

  Field calculation order.

• generated auto scroll bars will not disappear

  I used the following example script provided by macromedia to create a scrolling text box fed from a text file and the css file, but when I go to another part of Florida, generated by this script scroll bars remain - above the other layers. How can I know the scroll bars go away?
  
  
  //****************************************************************************
  Copyright (C) 2005 Macromedia, Inc. All rights reserved.
  The following is Sample Code and is subject to all restrictions on
  such a code as stated in the end-user license agreement accompanying
  This product.
  //****************************************************************************
  
  Manage the UIScrollBar - instance in the library
  this.createClassObject (mx.controls.UIScrollBar, "my_sb", 20);
  
  Set the text field target for the scroll bar.
  my_sb.setScrollTarget (my_txt);
  
  Size so that it corresponds to the text box.
  my_sb. SetSize (16, my_txt._height);
  
  Move it next to the text field.
  my_sb. Move (my_txt._x + my_txt._width, my_txt._y);
  
  Note: Download the TXT and CSS files to see their structure. Use the URL below.
  load text
  function loadMyText (evt) {}
  var loadit_lv:LoadVars = new LoadVars();
  loadit_lv. Load ("Projects.txt");
  loadit_lv. OnLoad = {function (success:Boolean)}
  If (success) {}
  my_txt. Text = this.content;
  } else {}
  trace ("unable to load file text.");
  }
  };
  }
  loadMyText();
  
  apply the stylesheet
  var flash_css = new TextField.StyleSheet ();
  flash_css. Load ("Levi.css");
  flash_css. OnLoad = {function (success:Boolean)}
  If (success) {}
  my_txt. StyleSheet = flash_css;
  } else {}
  trace ("unable to load CSS file.");
  }
  };

  Try:

• My PS6520 wireless printer will not print when she goes to sleep, any idea? Thank you

  My PS6520 wireless printer will not print when she goes to sleep, any idea? Thank you

  Hi 464544,

  Welcome to the Forums of HP Support! I understand once that your HP Photosmart 6520 starts in mode "sleep" you cannot send a print job, it does not automatically standby upward.

  Please take a look here:

  The printer into standby mode after five minutes of inactivity to help reduce energy consumption. The sleep time can be changed from the control panel. The printer will wake up mode 'sleep' to print when a print job is sent to it.

  However, the auto power off feature must be disabled. Auto Power-Off turns off the printer completely, you must use the power button to turn the printer back on. You can change the setting Auto Power-Off from the control panel. configuration -Source

  Menu Configuration > other Menus > Eco > auto shut-off > off

  I hope this helps.

• MacBook warning turn off if not connected

  OK, so I changed my internal hard drive (new SSD put in there). Replacement I noticed that my battery was essentially exploded. I thought it was obviously the reason why my laptop kept shutting off if not after 5-10 minutes if it is connected to the charger. Battery changed so & thought the problem was resolved, but it is always turning off. Anyone know what may be the problem?

  Reset the SMC could solve the problem.

  Reset the management system (SCM) controller on your Mac - Apple Support

• Windows xp will not download update sp3 to say need net Framework 2.0

  window is set to auto download. but will not. then new icheck updated, it analyzes a sp3 said I need a net 2.0 framework I have look in crontrol Panel Add Remove and they are not installed thanks for any help

  HI PE harl.

  Please take a look at the article here with a few troubleshooting for your question.

  I hope this helps!