My PS6520 wireless printer will not print when she goes to sleep, any idea? Thank you
My PS6520 wireless printer will not print when she goes to sleep, any idea? Thank you
Hi 464544,
Welcome to the Forums of HP Support! I understand once that your HP Photosmart 6520 starts in mode "sleep" you cannot send a print job, it does not automatically standby upward.
Please take a look here:
The printer into standby mode after five minutes of inactivity to help reduce energy consumption. The sleep time can be changed from the control panel. The printer will wake up mode 'sleep' to print when a print job is sent to it.
However, the auto power off feature must be disabled. Auto Power-Off turns off the printer completely, you must use the power button to turn the printer back on. You can change the setting Auto Power-Off from the control panel. configuration -Source
Menu Configuration > other Menus > Eco > auto shut-off > off
I hope this helps.
Tags: HP Printers
Similar Questions
-
SK2061: The wireless keyboard will not connect when the PC is turned on.
My problem is, when I start the PC, (HPK-15 500, 319NA), wireless (SK2061) keyboard, does not connect. I have to shut down the PC so he can connect (no restart, you must stop it). Have had the PC for 5 months and it has been published. Not changed the battery makes no difference.
The internet statement States I shoud push the blue button until the USB receiver flashes. This PC does not have an external USB receiver, I guess it's built in! The mouse works OK.
Hello @JimCar82,
I read your post on how the wireless keyboard will not connect when the computer is turned on, and I'd be happy to help you in this case!
Re-connect your keyboard to your desktop computer wireless, I advise you to follow the steps described in this document on the keyboard and wireless mouse troubleshooting. The USB receiver should be found at the back of the tower.
Please re-post with the results of your troubleshooting, and I look forward to your response!
Concerning
-
I would like to ask how can I do a massage of automatic return, I'm currently not available when vecation, travel bussines... Thank you
If this fix your problem, please mark the thread as "solved" Please?
Thank you. -
MY entire song will not play, just section A or B. No idea what I am doing wrong?
The first thing to check is if you have "all sections" selected. Push it + top button on the right, which should show you the section menu. Above that, it should say "all sections". Make sure that who is selected. I know not obvious, but sometimes it's the simple answer that works... Don't know what you need to do, if it is not there.
-
Found an answer on this site, but it was in French - difficult to understand.
Found an answer on this site, but it was in French - difficult to understand.
It helps if you describe what is happening, including the text of the error message, without paraphrasing.
Your statement may seem perfectly clear to you, but remember that no one else can see your screen.
Without more information, I suggest that you try Unlocker: http://www.filehippo.com/download_unlocker/ (FileHippo is in Arizona, the United States, if he did not secede recently).
-
I have windows 8. Recently, I have been unable to update 4 apps. I upgraded to 1 or 2 of them before. I get the error code: Ox8020002e.
Please update your drivers to the latest, this will fix the problem :)
-
Hello?
Hello
Please check the help below document:
Quickly find your serial number
In the case of the volume license product, please visit: site Web of Adobe License | Serial numbers | Orders | Accounts
Kind regards
Sheena
-
W510 doesn't wake up when she goes to sleep - Bit from Windows 7
Hi all
The Lenovo thinkpad w510 won't wake once she goes into sleep mode, I have to press the power button until it stops completely and restart completely, I tried different settings in the management of food etc. We have the same pissue on 3 different w510 with Windows 7 pro 64-bit
Does anyone have a solution for this problem?
Kind regards
-
My lexmark X 7550 printer will not display when uac is enabled.
Original title: user account problems
My lexmark printer will not display when uac is enabled. I have a lexmark X 7550. Someone has any ideas
Hello
1. what happens when you try to print the User Account Control (UAC) is enabled? You get the error message? After return the correct error message if applicable.
2. you are connected to a user administrator account?
3. don't you make changes on the computer before this problem?I suggest you install the latest printer driver and check.
http://support.Lexmark.com/index?locale=en&ProductCode=LEXMARK_X7550&UserLocale=en_US&segment=download&OS=WINDOWS_VISTA&page=downloadsList&oslocale=en_US -
DeskJet 3510 not found when she and my PC are connected wireless
Hello again,
When my Windows-8 HP Slimline Pavillion is connected to an Ethernet port on my router wired, the installer for my 3510 (already well running wireless - is no longer cable) can perfectly find. A my scan application and printer home page on the work of PC (display of ink, etc.) fine, as does impression on her.
The 3510 has a fixed IP address in my router (see my other post on airprint not working do not).
My HP machine, if you unplug the Ethernet cable, everything is configured to connect wireless to my router (which she does very well and gets me internet access, etc.). It ias 1 set (static) IP address in place in my Cisco/Linksys router to the wired connection and a second (static) for wireless connection - because the HP machine has different addresses for Wi - Fi and wireless.
My problem is when BOTH my PC and the 3510 are wireless, printer configuration 3510 CANNOT find the printer 3510 is clearly there and running. The applet or task of scanning bar shows "plugged in." He said that the tests are not available.
In summary, everything works when my PC is wired and the 3510 is wireless, bit does not work when both PC and the printer are wireless.
Ideas?
Thank you
Norm Farrington
Router changes are documented in my other post. See 3510 tags and airprint to find.
-
Apple wireless keyboard will not connect to mac mini
Apple aluminum wireless keyboard will not connect to mac mini. He worked the other day and when you press the power button gives me a green light for a few seconds. I removed from my bluetooth devices and removed the batteries which did nothing. It will not go into the mode of discovery, but he recognizes the keyboard and fails to connect.
So much for some reason any it plugged into my macbook of brothers.
-
My wireless router does not appear when I shoot to the top of my devices. It shows my fax, modem, scanner and a few others. But not my belkin wireless. And when I try to add it, the system can't find it. Please help
Belkin support for your model, for installation instructions.
Your router will not appear in the devices
-
L50 - B satellite will not start when the battery is completely discharged
Hello
My Toshiba L50 - B won't start when the battery is fully drained but connected to the power outlet.
I try to work most of the time on the battery to keep the battery in good shape, but when I forgot to turn off the battery drains and the system will not start when I plug in the adapter.The battery charge indicator is orange light as it should. Only when the battery is fully charged to 100%, it will run at startup and function normally after that. I tried to turn on the laptop several times during the charge cycle, but only when the charge indicator changes from yellow to white it starts. Tested for 2 bodies.
My old Toshiba always immediately turned on when I plugged the adapter even when the battery has been completely drained. Am I missing a setting somewhere?
Thanks for responding... I hope well :-)
Toshiba L50 - B
Windows 8.1
Any standard/original setting since I only acquired this laptop a month ago.The laptop should light up if the power adapter is plugged in and power the laptop corectly any if the battery is empty or during charge.
Please check the version of the BIOS that is available on your mobile phone and compare with the BIOS available on the page of the Toshiba UE driver
Maybe you need to update the BIOS, but to be honest, the history seems really odd to me and I m afraid that there could be some power supply electronic problemSo in the worst case, the laptop must be checked by authorized service provider.
-
I can't open my emails or folders. I have new messages, but they will not open when I try to open them. It says LOADING but it is right here does nothing. It started about 10 days ago. It also will not open a file I put in place.
original title: I can't open my emails or folders.Hello
I suggest you to contact MSN support center and check out.
How to contact MSN customer service
-
Dell audio drivers will not load when the system is turned on for the first time after adoption of Windows 10. I have to reboot every time. So what I'm doing puts the system into sleep. in this way, I don't need to stop and restart the system. It is Dell Inspiron N5559. Audio drivers are installed and up-to-date. Equipment works correctly.
Hi akilesh.sharma18,
Please repost this in the Audio forum from the laptop to help.
Maybe you are looking for
-
Want to 700-329: HP Envy 700-329 accepts no no Windows Pro 8.1!
Hello I recently bought a HP Envy 700-329 for our society. It came pre-installed with Windows 8.1 Basiles Premium. I had to format and put Windows Pro 8.1 on it, so we could join our field. However, what continues to be, is whenever I have install Pr
-
Microsoft requires a different activation, after several changes to my computer.
When I turned my computer back on today, a large block came on my computer screen. It was Microsoft asks me to activate my Windows again, because he said that there are changes to my computer systems. Why did he ask this? William batross
-
I bought a moultiformat HP DVD600S ultra slim external dvd/cd burner and am unable to watch the videos using the dvd on my HP Envy tilt 23-k009c. Afer plug the external DVD drive into a USB port on the all-in-one, I can view CDs which contain images,
-
Hi Experts,Just confused on the cpu sockets that we attribute to the virtual machine. It is recommended to assign multiple sockets to a virtual machine that is available on the ESXi host. For example, if the ESXI host has on 4 plugs; It will be advis
-
Hallo zusammen,Mein problem ist, dass ich ein Plugin zwar ohne Fehlermeldung installieren kann, aber wenn ich AE starte, kommt also Fehlermeldung:Yesterday noch ein Auszug-Logfile:Ticks = 2922< 2480 > < ALOG > < 5 > EGG Splash Screen Ordner "MisterHo