Switch to the second tray auto shut-off

Similar Questions

• HP 8630 will authorize specifying the second tray for printing shortcut.

  All-in-one printer inkjet HP 8630 range Pro will not accept specifying the second tray for printing shortcut. Indicates that the parameter is a conflict and obliges the "Printer Auto Select" option instead of allowing me to select "tray 2" which is an option. I like to keep a white shining in tray one and photo paper in tray 2 and made the my HP 8500 Pro for everything that I needed to do is select the appropriate shortcut configured by me to print the photo. Operating system is windows XP Pro.

  I want to start by apologizing for not picking up on this on your first post. The 8630 2nd tray print 8.5 x 11 or 8.5x14 paper.

  The reason why what impression pictures he says that there is a conflict and if he chooses the main tray is because there is no choice. The printer does not have the ability to print photos from the 2nd drawer. If you're looking to load media into the trays you need 8.5x11 or 8.5x14 in the 2nd tray and other media can be loaded in the main tray.

  In the printer's Specifications in paper output specifications > paper tray capacity & Supported sizes of paper in you shows what's available for trays.

  Change the source of your document must make all the problems disappear.

  Kind regards

• Auto shut-off will not

  OK simple task but no result.

  I just took an e250 new, not as effective as the newer devices, but I loved the idea of replaceable barttery. Anyway, I tried to get the stop to work automatically and it will not. Y at - it a simple trick I'm missing? According to the manual I go to settings, choose auto shut off, choose how long a delay and press the Center button to select. No good - no stop. What Miss me?

  In addition, this unit doesn't have a quick scan forward or back? Try to go back on an audiobook is a pain!

  Thanks again for the info. I loaded Rockbox and it will indeed used (manual is now 197 pages!), but it doesn't have the features that work better in my case. Many things I don't need or want not and some I don't understand even with the manual, but I'll try anyway.

• Auto shut off does not work on Windows vista.

  Original title: Auto shut-off

  I have a HP Pavilion Entertainment PC / Windows Vista and automatic closing does not work.  He tries to stop, but it is not...

  Hello

  Have you tried the command to stop as suggested by me in my previous post dated May 31?
  Check if you find an error recorded in the event viewer.
   
  Open event viewer
  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer
  
  Step 1: Also try to shut down in safe mode and see if that helps.
  Reference:
  Start your computer in safe mode:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  
  If you are able to stop in safe mode, perform the clean boot and see if that helps.
  Step 2:
  Here is the link:
  http://support.Microsoft.com/kb/929135
  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.

• Camileo H10-auto shut-off

  Hi all

  I recently (like, a few days ago) bought a Camileo H10 camcorder and I have a few problems with the following: apparently the camera turns off after a certain period of time without any user interaction, + it is record +. Now, I know that its got one-setting auto power off function of which it turns off after 3 minutes without any button presses when it does not, and is not a problem. But IMHO it should just disable itself while it's video recording, even if there is no entry user for some time. Worse still, when he does this, he is not even save what she had registered so far. It just seems to lose ALL the data that she had recorded.

  This happens after about 20 minutes of recording, or more and makes it pretty hard when we want to check us for a long time (ish) without a person to act the role of the cameraman... Now is this a problem with the type of SD card that I use (is a no name brand, but he says "class 8" there, and if the class 6 is 6 mb/s then class 8 should be 8 mb/s and therefore even better, shouldn't it?) or is it a 'feature' to save the battery, and if this is the last is it possible to disable it?

  Thanks in advance for any response

  It shouldn't power off during recording, while there might be a hardware problem that requires a repair. Maybe the battery is worn out? How old is the battery?

• After leaving the screen saver, display shuts off and change to select the user account screen

  I have a windows7 32 bit desktop. While everything works fine the problem is whenever I leave the keyboard and mouse intact even for one minute, the display turns off and change to select the screen of the user. 'Disable the display' and "put the computer to sleep" has been on 'never' and screen saver changed nothing but the problem still persists.

  Please provide the solution

  Hi Sam,

  Sorry for the late reply.

  I understand that when your computer is left idle, the select user screen appears.

  The issue can be caused if the power plan settings are incorrect.

  To get a better understanding of the issue, I want to know:

  1. What is the brand and model of your computer?
  2. You did it changes on your computer before this problem?

  To resolve the problem, try the following methods:

  Method 1: Troubleshooting to be able to run.

  The resolution of the problems of power check things as settings timeout of your computer, which determines how long the computer waits before turning off the display or enter the mode 'sleep'. These settings can help you save energy and extend the life of the battery in your computer.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  After trying method 1, if the problem persists, try Method 2.

  Note: When you're done, restart your computer and check if your computer works fine. If the problem persists, try Method 2.

  Method 2: Change the screensaver settings.

  I suggest you follow also the suggestion given in the answer by Vijay B answered the

  May 14, 2013.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/disable-automatic-lock-with-Windows-7/1d45e806-6a8a-492C-A0C7-ac85b759ad66

  Please, try the above suggestions and we provide the information required so that we can help you.

• MG7120 auto shut-off

  I've enabled auto stop 30 minutes, ECO settings, but the printer does not stop automatically. Wondering what I am doing wrong?

  Thank you

  Hello.

  The automatic timer resets if a print job is sent to the printer or if the device receives a signal or some kind of communication with a different device.  If the printer is used on a network, security or monitoring utility port can ping devices on a network.  This input signal can stop the timer.

  If the problem persists, you will need to manually power off when the unit is not used for an extended period of time.

  It has not responded to your question or problem? Find more help contact us.

• Auto shut-off

  Dear HP

  First of all thanks for spenting time read this mail...

  I have

  HP Compaq Presario CQ71-210SV (VF413EA)

  My operating system is windows 7 ultimate x 64-bit

  I have this laptop for 2 years without any problem... Each month 1 clean it then I'm sure there are no dust inside... It worked perfectly... I also have a Council with the fans, so he isn't getting overheated... One day, he got an error that my battery is not good, so I replaced it... All were very good until he started to be overheating (47 with speedfan) fan works but I don't think he has a lot of power... When I realized that the fan may be the problem, I CHANGED some things on the power management so that the fan may operate at full power... IM really desperate cause it always stops when I opened 30 minutes without anything to do and when I open youtube or internet stops really quick about 5 seconds from the time I opened it... I don't really know what is happening...

  Thank you very much, I am waiting for your answer

  Best regards

  Chris

  Dear rajeshmadhavan
  Thanks for your response
  Also when I leave it in the BIOS it doesn't stop if this is not the motherboard... and drive hard test and the test of the ram are clear

• Bluetooth and the gesture of the wrist will not shut off

  Only has the SW 3 for a few days but have paired it, cannot get the Bluetooth to stop scanning.

  I used the screen turn on BLUETOOTH initially but the BLUETOOTH TURN OFF does not appear in the menu - just keep looking for nearby devices, this must drain the battery.

  Also, after a few downs and start-ups Iknow options the WRIST TURN THINGS ON and OFF, while initially there was no option OFF the menu, but selection OFF makes no difference, a movement of the hand brings the screen time to life - unnecessary running or active, once again a battery drain

  Does anyone have the same problem, any solutions?

  I really love this watch, but it is a concern that it is still experimental.

  Thank you.

  To make the screen stay off there is an option in the app to Android on the phone.

  1. Open the Android wear App
  2. Press the gear button
  3. Tap your device (3 Smartwatch)
  4. Disable the tilt to reactivate the screen option

  Hope that makes what you want

• Mobile data turn power switch on the second user profile

  Hello
  I just put a second user profile on my Xperia z3 compact for my girlfriend, she's going to borrow the phone for a few weeks, but I can't find an option to enable mobile data using his profile.
  If I turn my profile and then go to hers, she'll have mobile data, but I wanted to be able to control it without having to change.
  There is no option to choose the NPP or mobile data turn on slide it towards the bottom of the configuration menus (the pencil icon) on his profile.
  I'm running the stock android 5.1.1 Xperia.
  Anyone know if this is possible and how? Thank you.

  can't find it on the user guide, https://support.sonymobile.com/global-en/xperiaz2/userguide/Multiple-user-accounts/

  I guess that's not possible. ?

• reorganization of records items auto shut-off

  using Windows 7

  in the folders I want to drag folders rarely used for the bottom pane open the folder and leave frequently used at the top items
  There was to be a record setting called "auto pair elements" but it is nowhere in the folder settings... so how can I customize my files...?

  Hello

  Folders in Windows 7 are self-organizing and this behavior can be disabled by using a setting in Windows 7.

  As a workaround might take a look at the answer given in the thread below:
  Sort order of the records

• Journal print - Photosmart 7520 fax auto shut-off

  As a topic, how to prevent faxes print log after each shipment?

  A previous answer for another model is not applicable for the 7520.

  TIA.

  Update... No joy with the FW update, so a new printer is provided.

  I hope that I just got a bad first & the replacement will be just fine.

  --------------------------------------------------------------------------------

• The Microsoft Wireless Mouse 5000 has a power button or an auto-turn off function when you use it,

  I am interested in buying one for use on a desktop PC, then the transmitter/receiver must be connected all the time...

  Mouse Wireless a usually - ON / OFF switch or the automatic stop function.

  And because this mouse is not to have ON / OFF switch, so it must have auto power-off function - and this function is independent of the question whether the radio is placed in the mouse, or even on your computer (plugged) attached.

  And sometimes - if the mouse goes into power saving mode - you must first press the button of the mouse to wake up.

  LC

• HP laserjet pro 400 m401 dw - how do you get to recognize the second impression tray?

  We just bought this printer about a month ago, and we love it, so we bought the second tray (or drawer, however you want to think of it) because my biggest complaint every day is reload the paper trays. WE have tried everything we can think of to get the printer to recognize the second tray and pull the paper away when the first is empty, but its does not work. It's like we bought it for no reason. Anyone know how to make it work? Thank you

  You must distinguish between the following:

  • Printer - does the printer itself knows that the tray is present? Check by printing a report 'configuration', or by checking the settings with the built-in Web server. If the tray is not recognized, this implies a physical problem with fitting tray, etc.
  • Of the computer - the printer driver on your system knows that the additional feeder is available? On a system Windows, look at the device settings tab in the printer properties dialog and check the extra tray is set to installed and not installed.

• Computer shuts off and comes back over and over again trying to open a session

  Original title: when I turn on the computer and the connection, it will compromise the destop and then shuts off and comes back, over and over again. I have run and remove detections from virus and bug, but it still does not work. Help
  Can I delete something so that my computer turned on? After f8 button the window xp from microsoft to address blue lights with a list of things to do in which nothing has allowed so far.

  Hi bonnieb1941,

  1. When did you start to question?

  2. you remember to make changes to the computer before this problem?

  3. How have you tried to run the virus and bug checks?

  4. is this the machine is disconnected and re-login in back or just reboot?

  Step 1:

  If the machine is in continuous loop, then try to disable the auto restart in case of system error and let us know the error code.

  a. restart your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.

  b. Select disables automatic system failure reboot when the Windows Advanced Options menu is displayed and press ENTER.

  Check the link for more information:

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2:

  Also, try unplugging the external devices connected to the system and check if the system boots normally.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.