Automate the copy of several cells of different lines based on a non-single cell

Similar Questions

• How to extract the same song, several times using different bit rates or formats and store all the digital music files in WMP 12 default on the same HDD music library

  Using Windows Media Player 12 (w/under Windows 7), "can I ripping the same song, several times, using different bitrates & and/or formats and store all the digital music files in the music library by default WMP - 12, on the same hard drive?

  1.) #1 goal: tear up the same song repeatedly, w / "different rates" as a WMA file.

  2.) #2 goal: tear up the same song repeatedly, w / "different rates" as an mp3 file.

  3.) #3 objective: NOT to each subsequent copy (version) of the song, deleted & and/or replaced by the previous version of the song [even].

  4.) question Bottom Line Up Front--> is Windows Media Player 12 (included with the Windows 7 operating system) are able to achieve '#1 objectives; #2; & #3 above?

  5.) details/example: I want to tear the piece "Maria Maria by Carlos Santana" to my laptop as a Windows Media Audio [WMA] file.  In addition, I would like to rip the song 'Maria Maria' three several times with 3 different bitrates in format WMA; and, as an MP3 file.  Therefore, my final result wished (after the extraction process), will take place the four 4 audio files split up as follows: (a) 'Maria Maria by Carlos Santana'--> Format: file WMA; Ripped @128 Kbps bitrate.  (b) ' Maria Maria by Carlos Santana'--> Format: file WMA; Ripped to the "Variable bit rate; (c) ' Maria Maria by Carlos Santana'--> Format: file WMA; Ripped commissioning "Lossless." and (d). 'Maria Maria by Carlos Santana'--> Format: MP3 file. Ripped @256 Kbps bitrate.

  6.) my preference: I do NOT want to rename the file (s). {for example, 'Maria Maria by Carlos Santana' renamed/changed for--> "Maria_Maria_by_Carlos_Santana_128kbps.wma",...} 'Maria_Maria_by_Carlos_Santana_256kbps.mp3 '; etc.}.  In addition, I am not concerned about the additional disk space that will be consumed after multiple copies of the same song with different speeds of transmission and different formats.

  7.) my experience w / Windows Media Player 10 (w / the operating system of Windows XP): using WMP - 10, my goal (s) described above is not a problem at all.  Simply insert the CD purchased by Carlos Santana, containing the song "Maria Maria"... Select the desired Format (WMA; WMA VBR; WMA Lossless; or mp3)... Select the desired flow rate (WMA... 128/160/192kbps_mp3: 128/192/256/320 kbit / s; etc.) ; and click on the "RIP" button to start the copy process on the hard disk of of Carlos Santana's "Maria Maria".  This process (w / WMP-10) would result in having the same song, copied on the hard disk, with levels of quality different "audio" (via the different bit rate settings); regardless of the format (MP3/WMA) which was chosen.

  8.) my experience w / Windows Media Player 11 (w / the operating system of Windows XP): using WMP 11, to described above of my objective (s) could not be reached e-a-s-i-l-y.  The problem with WMP - 11 - in short - which was after the desired selection "Rip settings" tab 'Options' of WMP - 11 (i.e., Format & Bit Rate) and heart-wrenching piece wanted to {'Maria Maria by Carlos Santana'} a moment later/second, WMP11 remove / would crush the previous version of the song [even].  Therefore, the program would NOT allow the user to have multiple copies of the same song on the hard drive of the PC; which obviously restricts a user to have the freedom to choose what level of quality digital audio, they prefer to listen to.

  9.) the ability to have multiple copies [at my descretion] of the same song (on my hard drive) with different bitrates and formats in my music library, is important for me because it has a direct impact on "how I enjoy MY music ', and in what form (audio quality), I choose to listen to my music.  {For example, when I exercise and listening to my camera, digital audio player (Zune), a song ('Maria Maria by Carlos Santana'), will usually be torn off at a lower rate due to the unit of capacity reduction of storage - compared to the storage capacity of notebook PCs/desktop/external hard drives PC.}  However, when I listen to my music through my home cinema or entertainment system (which contains a hard disk dedicated with a large storage capacity), I prefer to load the entertainment system with digital music files that have been ripped to WMA... with the bit being rate-setting is for the: settings "WMA Variable Bit Rate" or "WMA Lossless.

  10.) there you have it.  This is my first post in this forum.  I hope that [detailed] explanations, will be sufficient to encourage these "with knowledge & the hands on experience" using Windows Media Player 12 (as well as with WMP-10/WMP-11 respectively), by providing a [step] "How-to"... "solution to my situation.  It would be highly appreciated.  I'm looking forward-'the solution' - and relevant suggestions & and/or community feedback regarding my request for assistance.

  * Thank 'All' (that would) in advance... For your time & Assistance *.

  Certainly, you can, but I would say that they be in different folders, for your convenience as well as Windows.  You can create one for each debit/format, then you will know who is who.

  In Windows Media Player, on the toolbar, select Tools, Options, Rip, and then select the flow you want first, rip music, then change the folder (higher on the same tab) and rip again... and so on and so forth.

  When you are at home on your home theater, you can use the 320 bitrate folder, when you transfer to the Zune, you can use one of the lower bitrate files (although I personally tear it up to 320 and let the Zune reduce as he wants, even with the iPhone via iTunes, hard drive space is not really a problem here) my server has several hard drives, and I can always add more if and when space is low!

• Make the same comp several times with different text

  Hello!

  I'm looking for a way to make my 100 + times with a different text in two layers. I thought batch replicate this model and then batch change text layers, but I've been Googling autour and found no solutions.

  I need is ready solution, just a direction on an approach I take to perform this task. Told me on another forum to ask here and there are a few scripts that are just what I need assistance excellent file as data. You could point me to them?

  Thank you!

  This is an old thread from Creative Cow that deals with a way to do what you want using a file text and Expressions:

  CreativeCOW

  There are also some commercial script tools that automate the process very well:

  CompsFromSpreadsheet 5 - aescripts + aeplugins - aescripts.com

  Templater - aescripts + aeplugins - Rig aescripts.com

• Comparison of the data of several rows in a table - based on the primary key

  Currently I have a select statement that returns hundreds of records.  Each returned record is linked to A NUMBER of ORDER this order number has a recipe.  (a bit like a cooking recipe).  Each recipe has many records in the database related to this order number and records should be compared to records in a table that bind to a specific primary key...  (I have already developed the logic to isolate what PK I need).  If all these records that are returned by the select statement below does not match all the records containing PK in the table below, I need to get the next PK and compare all these recordings for select statements return.

  See below for a better understanding. Need a good example detailed on how to solve my problem here.

  Just to help you understand:

  Each element of the recipe is 3 parts (side, ref_des, part_number).  1 single recipe can have several parts (where the part_number), and each of these pieces should be placed on the lower side or top of the Board that is there "side" comes into play.  Same thing with Ref_Des.

  What is going on

  Select statement returns the RECIPE of ORDER NUMBER A.  There will be multiple records returned by this query.

  Select the Return statement:

  • Side
  • Ref_Des
  • Part_Number

  Example of return:

  B c17 75145-2

  T f14 89242-8

  B s12 45123-3

  etc,

  In general - what I need to do:

  There is a table called AUTO_RECIPE_DETAILS.  I take all of the records returned by the select query above and compare for each record in this table relating to the recipe 30319-000001.  30319-000001 a number of records.  It is the primary key for a whole recipe as seen above.  This primary key is bound the number of data records in this table.  The comparison is to see if all records under RECIPE_NAME 30319 -000001 match all the records returned by the select statement.

  IF IT DOES NOT MATCH: recover the following recipe in this table below 30319 -000002 and make the same comparison.
  

  Here's a perfect example of what the table looks like: (AUTO_RECIPE_DETAILS)

  
  

  RECIPE_NAME SIDE REF_DES PART_NUM

  -30319-000001 C16 87595-1 B

  -30319-000002           T B14 74150-4

  -30319-000001 T B14 34251-2          

  -30319-000001            T F24 84180-7

  -30319-000002 T B12 13710-8          

  
  

  
  

  It is the solution to my original question.  By this thread, it's the right answer and I hope this helps someone who is trying to compare two arrays element-by-element.  In the end, the advice given in this thread were correct and I will be using all of your suggestions and the scrapping of this.  Thank you everyone for your help though.

  FOR index_p IN pid_recipe. FIRST... pid_recipe. LAST

  LOOP

  Result WHEN the OUTPUT = 1;

  FOR index_d IN details_recipe. FIRST... details_recipe. LAST

  LOOP

  IF (pid_recipe (index_p). SIDE = details_recipe (index_d). SIDE)

  AND (pid_recipe (index_p). REF_DES = details_recipe (index_d). REF_DES)

  AND (pid_recipe (index_p). PART_NUM = details_recipe (index_d). PART_NUM)

  THEN

  EXIT;

  ON THE OTHER

  DBMS_OUTPUT. Put_line("IT WAS NOT a MATCH");

  result: = 1;

  EXIT;

  END IF;

  END LOOP;

  END LOOP;

  DBMS_OUTPUT. Put_line('LOOP OUT');

• the black screen with some many different lines

  my hp 630, windows 7 32 - bit creen says:

  shoutdown thermal occure

  The Bioos system has detected that your laptop has been intno hibernation or

  Sub stop overheating. The system id now opereting normally.

  overheating can occure if the cooling duct are blocked or the operating temperature exceeds the specifications.

  The laptop needs to retrun to normal operation once the sotuationn is resolved.

  Temperature of the system (90 d)

  Enter - continue startup

  my hp 630, windows 7 32 - bit s creen says:

  shoutdown thermal occure

  The Bioos system has detected that your laptop has been intno hibernation or

  Sub stop overheating. The system id now opereting normally.

  overheating can occure if the cooling duct are blocked or the operating temperature exceeds the specifications.

  The laptop needs to retrun to normal operation once the sotuationn is resolved.

  Temperature of the system (90 d)

  Enter - continue startup

• column of a link with the ability to send the user on several different pages

  using apex 4.0
  
  In my example:
  User: Secretary for a large company in charge of the HR database, enter new employees, reorganizing the employees, managers, etc.).
  Employee: A person working for the company whose information is in the database.
  
  The problem: my client wants the data divided into several subcategories, so, for example, it would be like sales, managers, etc., using the human resources database. The main page of this project contains a table that lists all the company employees, low to high. There is a column of navigation with several links to predefined reports filter that filters data on the question whether the employee in the database is a seller, Manager, etc.. If the user clicks on the link change, it will take them to a page master detail where the upper part is general information and background tasks of the employee. The problem is that, according to his level, there may be additional details that the user will want to change, such as if the employee is responsible for, the user will also want to see another table a list of employees by the Manager. There is also a second level of managers who will have a table of managers of this person manages. The dream is that there is a list of links above the tabular presentation, which will allow the user to choose what table they want to see. I thought about the following:
  
  1. create several copies of the home page, one for each subcategory, so that she will be the link change correct.
  Positives - Simple, easy, I know how to.
  Negative - would like it to appear on the same page, such that if the user deletes / adds a column in a single page, this change would occur on all other pages. I also have to make the same changes on several pages, one is required.
  
  2. create a text field hidden on the page that records the last link, what they clicked. When the user clicks on the link change, some kind of javascript selects the right page to go to in view of what is in the box.
  Positives - seems simple enough, but I have not tapped into javascript a lot
  Negative - not for sure if it is even feasible, would need help
  
  3. create a subpage of master-detail, that holds all the necessary tables and hide those that are not. When the user clicks on a link, the link triggers the current table to hide and another to appear.
  good points - all in the same place, that one page to link to main page
  negatives - it would require at least 5 tables on one page and I do not know how the apex would like that. I also don't like the idea of the page calling itself when the user is looking at senior managers and to display a lower Manager / employee.
  
  4. a creative method / useful / incredibly simple bore by a user of this forum.
  
  Because I'm in a very short, customer review period next week, I implémenterai #1 because it is the easiest and most straight forward, but I would like to know your thoughts to make much cleaner.
  
  Published by: rabbitman June 4, 2012 08:07

  I don't know if it's the best way to accomplish what you want, but it worked for me.

  Change the link in the column to specify the following for a target URL, where EMP_NO and EMP_TYPE are columns of the report.

  JavaScript:apex. Submit('#EMP_NO##EMP_TYPE#')

  In the processing of the page after several branches to different pages depending on the type of employee. For example,.

  Branch to Page 2: Condition = instr (: REQUEST, 'SALES') > 0
  Branch to Page 3: Condition = instr (: REQUEST, "MANAGER") > 0
  Branch to Page 5: Condition = instr (: REQUEST, 'PRÉSIDENT') > 0

  Since the: APPLICATION also has the EMP_NO, you can use this to set the value of the EMP_NO for the target page, pull up to the employee's file.

  Natasha

• Automate the cells of the filter to another table based on two columns

  Hello

  What I'm trying to do is: filter multiple cells to a new table. In this example, I want that all students (column 'lidnr', 'city', then the first 7 columns) with 1 teacher in the 'First' column to be copied into the table 'teacher 1'. The same goes for students per 1 teacher in the column "second". I know it can be done with the help of the filter and the copy paste, but I would like to know if this can be automated, because there are many more tables in my actual document.

  

  

  I've been using maybe to think the search formula but he can't give me more than one result, the result must be unique.

  Thank you very much for your help.

  Kind regards

  Kim

  Hi Kim,

  The usual way to do this is to add an index for each table for which column the data is to be copied.

  Here is an example of preliminary. Improvements after return from the light of day.

  

  Triangles of error on the last row of T1 are thanks to the formula out of data to search for. Easily fixed.

  Order of the names is different from your example, which is grouped by day numbers. Build lists in the desired order, rethinking the index calculations.

  Course index calculations use the formula below, entered in Table 1::L2 and thre to the rest of the blue full cells filled.

  L2: = IF (OR (RIGHT($H2,1) = RIGHT (L$ 1.1) RIGHT($J2,1) = RIGHT (L$ 1.1)), MAX(L$1:L1) + 1"," ")

  Data recovery on the Table T1 is well done by the following formula, entered in A2 and down and B2 and filled and down-filled.

  A2: = INDEX (array 1::A, CORRESPONDENCE (LINE (−1, 1 Table): $L, 0))

  B2: = INDEX (array 1::B, CORRESPONDENCE (LINE (−1, 1 Table): $L, 0))

  More tomorrow (actually, later today).

• Several Thunderbird in different OS on the same computer to access profile on common logical drive

  I installed Windows 8.1 under another OS on a machine who already have Windows 7 (and Thunderbird). The hard disk is partitioned and you Bird profile files are on a different logical drive available to both operating systems having the same name of player.

  I met two problems:

  1. While the new facility to Win 8.1 you Bird sees all mail folders and messages (and can get new messages from the POP3 account, this configuration does not see also within this same profile address books, and)

  2. it does not correctly send SMTP (even with the same account settings.

  Regarding the last, I remember working with you Bird and its predecessor as the SMTP password has been set from the first use, but never appeared for editing purposes; the only time wherever he appeared was during the creation of a new source of SMTP. In this case, I don't see where I can re - enter the SMTP password. And, I tried to create a new configuration of SMTP, but it did not help. I have entered the correct password, but it failed. Any ideas on how I can get this set up?

  With address books, even if this new facility you Bird knows where the profile (as evidenced by the fact that he doesn't see mail folders and messages), he does not see the address books. Still, I don't see where there is the setting of the location of the address book. I looked for the familiar file that tells the program where to find everything, but I could not find in this new facility to Win 8.1.

  Any ideas on these two issues would be greatly appreciated!

  I finally found the answer. I was able to display the users folder in Win 8.1. I just copied files of Thunderbird of the Win 7 Users\UserName\AppData\Local Users\UserName\AppData\Roaming files directory and directory to the same location on the 8.1 users folder.

  As soon as I did that and restarted my SMTP has been fixed and all address books were available. (And of course, it still works in the world of Win 7, too).

  From what I can glean the data in these records communicate key information at the Thunderbird not covered by the option setting for the folder in the program itself.

  I don't know if the copy of these records is this 3rd party promise to help with the relocation of existing facilities, but should be.

  As a reminder, I try 8.1 win on the same computer as a pre-existing Win7. I wanted to use my same familiar programs, including obviously Thunderbird, with the same configuration and access to the books of mail and same address located on a common additional logical drive.

  Copy these files to the new operating system, as well as pointing to the new installation of program to the existing profile of you bird accomplished all of this.

• When I try to copy a single file (for example: size of 1 GB) drive hard to any what external memory device via the USB port, the copy process takes several hours to complete

  I use a DELL Studio 15 laptop computer. When I try to copy a single file (for example: size of 1 GB) hard drive to any external memory device (for example: USB key or external hard drive) via the port USB, the copy process takes several hours to complete. I have checked the viruses using McAfee Antivirus, but could not find. Can someone suggest me a solution?

  Hello

  ·          Were there any changes made to your computer before this problem?

  Step 1: Format the external device to the NTFS format and check if the problem persists.

  See: http://windows.microsoft.com/en-US/windows-vista/Convert-a-hard-disk-or-partition-to-NTFS-format

• Automatically reduce the copy on my M1212nf MFP printer

  Printing works fine. When I use the Copier, it automatically reduces the copy to 1/3 rd page.

  I check the settings to make sure it's to (100% - original) and put it by default.

  I have also turned off the device. Nothing has no effect.

  Is there a reset? or am I missing something?

  Hi jtcodr,

  Try the steps I provided in the private message and let me know if you still have the same problem?

• Customize a slide show using the images of several different themes.

  I downloaded several themes for Windows 7 and can change between them. What I want to do is to create a custom theme using the photos of the themes that I have. In other words, chosen pictures of the Germany, the United States, the Bing and themes Aero to a custom theme.

  Now what I get from the help files, is that, to do this, I need to have all the photos into a single file. It's not a problem, but for one thing. I can't FIND the pictures of the theme. Properties on the photos don't show their location, and they are not saved in the folder my pictures.

  Research of the pictures showed thousands of back, it's not a viable option.

  How to find pictures of the theme?

  Hello mac173173,

  Thank you for visiting the Microsoft answers community.

  In addition to the these suggestions, you can also go into Desktop Backgrounds under each theme and make a copy of the images you want to set up, and then select the images for the Undertow.

  -Right click Desktop > click Customize
  -Click on desktop background > right click on each image you want to save > select make a copy (place the copy in a folder in your library of images that you want to use)

  Repeat for each image throughout each theme. The select images to include in the background slide show.

  Hope this helps Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I had several programs in Windows XP I can't access Windows 8, specifically the Solitaire and Free Cell games.

  I had several programs in Windows XP I can't access Windows 8, specifically the Solitaire and Free Cell games. I have uploaded them to Google Drive, but have compatibility problems. What can I do?

  Original title: program programs Application Applications compatibility

  He belongs here and serves no useful purpose. It is a peer to peer forum in which we come to get help with a problem or to help someone else with theirs, not to listen to some drivel by some small individual whose existence is made up of one complaint after another. Grow-up, things change, and no matter what you think that the old ways are not the best. If you have something useful to add to the end of things otherwise I will totally ignore you as I do everyone free service. anything not that you said above is anything but a mug shot and does nothing but show your ignorance.  Hope this helps and if you need any additional aid station and we will be happy to help you.

  The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it's employees, or any other Member of this forum.

  "When we try to take anything by itself, we find it hitched to everything else in the universe." -John Muir

• With the help of several styles of paragraph in a table cell

  Hello

  I'm stuck using several styles of paragraph within a cell. I guess the solution is that I need to start a new paragraph, but so far I have not found a way to do it. When I directly in InDesign, it works fine, but I can not start a new paragraph when you use the script.

  Here's a solution I've tried:

  with {(table)

  .properties de.insertionPoints.item-(1) lines [0] .cells [0] = {}

  content: '1 ' Format string,

  appliedParagraphStyle: styleFormat1

  };

  .properties de.insertionPoints.item-(1) lines [0] .cells [0] = {}

  content: "\rString in size 2',

  appliedParagraphStyle: styleFormat2

  };

  }

  But until now I did not get a new paragraph. When you look at the IDMLs, you can see that InDesign adds a new paragraph inside the cell, while my code remains in the same paragraph.

  Here the IDML result when I do in InDesign:

  "< cell auto ="ue0ie4i0"Name =" "0:0" RowSpan = "1" ColumnSpan = "1" AppliedCellStyle = "CellStyle / $ID / [no]" AppliedCellStylePriority = "0" >

  < ParagraphStyleRange AppliedParagraphStyle = "ParagraphStyle/Format1" >

  < CharacterStyleRange AppliedCharacterStyle = "CharacterStyle / $ID / [no style character]" >

  < content > string to Format 1 < / content >

  < Br / >

  < / CharacterStyleRange >

  < / ParagraphStyleRange >

  < ParagraphStyleRange AppliedParagraphStyle = "ParagraphStyle/Format2" >

  < CharacterStyleRange AppliedCharacterStyle = "CharacterStyle / $ID / [no style character]" >

  < content > string to Format 2 < / content >

  < / CharacterStyleRange >

  < / ParagraphStyleRange >

  < / cell >

  And here is that when I use the script:

  "< cell auto ="ue0ie4i0"Name =" "0:0" RowSpan = "1" ColumnSpan = "1" AppliedCellStyle = "CellStyle / $ID / [no]" AppliedCellStylePriority = "0" >

  < ParagraphStyleRange AppliedParagraphStyle = "ParagraphStyle/Format2" >

  < CharacterStyleRange AppliedCharacterStyle = "CharacterStyle / $ID / [no style character]" >

  < content > string to Format 1 < / content >

  < Br / >

  < content > string to Format 2 < / content >

  < / CharacterStyleRange >

  < / ParagraphStyleRange >

  < / cell >

  It is therefore quite clear my script is not adding a new paragraph. Any ideas how to get a new paragraph so I can use more than one paragraph style?

  I don't have test nore debug your code, but I suggest you another method to apply the content and style of two paragraphs. Do not use a with statement.

  What is your version of InDesign?

  Example:

  // Add new document:
  var doc = app.documents.add();
  // Add two paragraph styles:
  var paraStyle1 = doc.paragraphStyles.add({name : "ParaStyle-1" , pointSize : 20});
  var paraStyle2 = doc.paragraphStyles.add({name : "ParaStyle-2" , pointSize : 15});
  
  // Add a new text frame (default is on page 1):
  var newTextFrame = doc.textFrames.add();
  newTextFrame.geometricBounds = [0,0,"150mm","150mm"];
  
  // Add a table to this text frame:
  var table = newTextFrame.tables.add
  (
      {
          bodyRowCount : 4 ,
          columnCount : 3 ,
          width : "150mm"
      }
  
  );
  
  // Assign the contents as array:
  // The fisrt and only entry in this array will give the first cell its contents:
  table.contents =
  [
      "Paragraph 1"+"\r"+"Paragraph 2"
  ]
  
  // Assign the formatting of the two paragraphs:
  table.cells[0].paragraphs[0].appliedParagraphStyle = paraStyle1;
  table.cells[0].paragraphs[1].appliedParagraphStyle = paraStyle2;
  

  Strategic outcome with InDesign CS6 Mac OS x 10.6.8 v8.1.0:

  

  Hope, that helps.
  Uwe

• How to set a fixed length scheme, composed of several documents of different types, with details of the header and footer in points 22 and 23, namely having 10 for 20 for detail header and 30 for the footer

  How to set a fixed length scheme, composed of several documents of different types, with details of the header and footer in points 22 and 23, namely having 10 for header, 20 for retail and 30 for the footer.

  Here is the sample file

  DDWTYBILL13092502572 1000000112\\NHLSFS\ORACLE\ORACLE\BILLING\VERIFY\ 2013/09/25 01:19:08 BILLEND

  DDWTYBILL13092502572 2000000212PRIVATE PRIVATE STY5572142 010700 INV 12STYD000789 02-AUG-20130000010472 STY STY 1100611006MGIT NNM DIMPHANA, CN, CELESTE NERINA 9 January 1964 TYG A2 DR OF PREEZ 5602181 63301345 TB731543 Suspect 91TB? (AC) EMPIEEM A2 Z03.0 05-AUG-201305-AUG-201324-SEP Z03.9 - 2013FEND 113,60 TYGERBERG HOSPITAL Ward

  DDWTYBILL13092502572 2000000312PRIVATE PRIVATE STY5572149 010700 INV 12STYD000789 02-AUG-20130000010472 STY STY 1100611006MGIT 91 NNM DIMPHANA, CN, CELESTE NERINA 9 January 1964 TYG A2 DR OF PREEZ 5602181 63301345 TB731548 empyema GMP A2 Z03.9 05-AUG-201305-AUG-201324-SEP Z03.9 - 2013FEND 113,60 TYGERBERG HOSPITAL Ward

  DDWTYBILL13092502572 2000000412PRIVATE PRIVATE STY5572351 010700 INV 12STYD000789 02-AUG-20130000010472 STY STY 1100611006MGIT NNM DIMPHANA, CN, CELESTE NERINA 9 January 1964 TYG A2 DR OF PREEZ 5602181 63301345 TB731584 Suspect 91TB? EMPIEEM? CA Ward HOSPITAL TYGERBERG Z03.0 Z03.9 A2 05-AUG-201305-AUG-201324-SEP-2013FEND 113,60

  DDWTYBILL13092502572 2000000512PRIVATE PRIVATE STY5572352 010700 INV 12STYD000789 02-AUG-20130000010472 STY STY 1100611006MGIT NNM DIMPHANA, CN, CELESTE NERINA 9 January 1964 TYG A2 DR OF PREEZ 5602181 63301345 TB731585 Suspect 91TB? EMPIEEM? CA Ward HOSPITAL TYGERBERG Z03.0 Z03.9 A2 05-AUG-201305-AUG-201324-SEP-2013FEND 113,60

  DDWTYBILL13092502572 2000000612MAJOR MAJOR STY5577530 010700 INV 12ZTYG000009 02-AUG-20130000010472 STY STY 1100611006MGIT 91 NNS ZOZI, S, SIYAMBONGA 27 March 2010 TYG D3 DR MARCELIN 5602181 113799662 TB731663 lymphadenitis Ward D3 TYGERBERG HOSPITAL I88.9 Z03.9 07-AUG-201307-AUG-201324-SEP H1 - 2013MEND 58,52

  DDWTYBILL13092502572 2000000712MAJOR STY5577537 MAJOR 010700 INV 12ZTYG000009 06-AUG-20130000010472 STY STY 1100611006MGIT 91 NNS DLAMINI, N, SIMON TYG 9 October 1976 F1 DR WZESE 5602181 135524676 TB731666 Suspect Ward TB F1 TYGERBERG HOSPITAL Z03.0 Z03.9 H1 07-AUG-201314-AUG-201324-SEP - 2013MEND 58,52

  DDWTYBILL13092502572 30003034120000003032END

  You can create a nXSD the use of the Native Format generator and advanced search attribute is used to read values to a specific position and use it as the choice. You can find an example here

  http://docs.Oracle.com/CD/E11036_01/integrate.1013/b28994/NFB.htm#BGBBAJFD

• Assign the copy of the instance to the various participants in the role of different

  I got some info about the forum given by Dan to use split and join
  
  Have a question Dan if you can clarify please
  
  
  Responsible for M1 assigns tasks analyst a1
  
  then I call split so that the Manager M1 and A1 analyst sees same task which is nothing else than my jsp page in struts.
  
  How do we know that both Manager and analyst are done with task so that they reach the join return?

  Hello

  Once a the Split activity in your example, the Manager and the analyst reached work item instance each would have a copy of the work item in their Inbox because the Split has a transition to activity in the role of Manager and another passage to an activity in the role of the analyst.

  Once the analyst has completed its work, the copy of the work item flows to join activity and executes the logic in the join. Similarly, when the Manager has completed its work, their copy of the work item flows to join activity and implements its logic. Given that the engine keeps track of when all the copies reached the join activity, once the second copy ends the execution of logic in the join, the original work item instance let the join activity and continues downstream in the process.

  All this is done automatically by the engine when running.

  Dan