Automate the creation of the VM

Similar Questions

• Automate the creation of 11g SGD administrator

  Is it possible to automate the creation of a 11g SGD administrator? I can automatically create the database user, but there are a few privs resources which must be granted as well. If someone has done this, I would be grateful for a few steps in the right direction.
  
  Thanks in advance.

  Abandon - type = "DB_EXTERNAL_USER" and your user name will be created as a repository authenticated user (EM_USER) (which will be a database user).

  Type

  Type of user. The default value of this parameter is EM_USER. Possible values for this parameter are:

  EM_USER

  EXTERNAL_USER

  DB_EXTERNAL_USER

• Automate the creation of contour in Essbase with lots

  I installed Essbase and IST version 11 and created meta-model and Meta outline in the environmental impact assessment.
  Also created an application in the service of the Administration of Essbase. I need help to load the dimensions of the environmental impact study in the
  Application using a batch file.
  
  Any help/input would be really appreciated.
  
  EAS/IST/Essbase all three are installed on the same server (windows platform) and database is oracle 10g on the same server.
  I need to automate the process of creating the sketch.
  
  Thanks in advance.

  If you have used EIS, you will notice in the console, when the dimensions of the building or loading data, you can run it immediately, distributes them or save them to a file of cbs. IF save you it as a file of cbs, you can then plan their use with a batch file to run them. The Administrator's guide has a very good explanation of what do the different commands and how to run them

• How to automate the SSH connection/commands on a series of switches PowerConnect 3400 3500 and 6200 series.

  I'm trying to find a way to automate the commands to send a series of switches (about 20) showing some configs and save the output to a file. The way I was trying to do was using plink and creation of a batch of files for her.

  Essentially, it would be something similar to the following.

  ECHO for /f % in (devices.txt) plink % l word of PAST of USERNAME-pw-v - m C:\Batch\commands.txt > output.txt

  To split the above command, looking for my ips in the devices.txt and made a "plink pw - username PASSWORD - v IP-l m - COMMANDS > OUTPUT" for each. The problem, I'm running is that the switches do not accept logins, they constantly ask for the user and the password again. Even when you try to put them in the commands.txt he will not accept the entry. I googled using plink with dell switches but there is nothing to talk about this problem.

  So my question is, is it possible to automate this sort of thing in a batch file? Or some way to automate a series of commands to a switch via SSH? I'm just not wan't do manually connect to each of them, carry out my orders, out, reconnect and repeat. I did it on cisco switches so I thought the process would be similar but I don't understand what obstacle I'm running in here. Ideally, I'd like to see how to do this via SSH but at this point, I am ready to accept almost any alternative (secure) to automate the sending of orders for my switches.

  I hope that all makes sense.

  Sorry, I haven't used before plink, so I'm not sure what to change to get this to work. In the past, there was another Member of the community who has been able to use expect to establish connections to switches and save configs.

  Linux.Die.net/.../expect

  It may be somewhat more than installation, but you can be able to make it work for your needs.

  http://Dell.to/1RONL3D

  Let us know

• Automate the VMware Snapshots

  I'm looking to automate a task with regard to snapshots in 5.0. Before launch us updates Windows take us a snapshot of each system manually. I would like to have a script that can automate the creation of snapshots and then run another to remove the next day. I found a script that will take a glance of all my servers, but I was looking for a way to do it by a list. Does anyone have any suggestions? I am new to scripting.

  you could do something like this in excel, csv

  Column1 Column2 Column3

  New-Snapshot -VM    VM        -Name BeforePatch
  

  then the export in Notepad, remove the comma and then save it as ps1.

  do something similar with the removal of the snap

• How to automate the pan/zoom functions?

  Version: Adobe Premiere Elements 12

  OS: Windows 7

  I do a lot of fixtures where most of the video is photos.

  Is it possible to automate the pan/zoom in a random way, I can change it later to my taste?

  Most of the time, I have a lot of photos, if I do frame-by-frame manually it will take me forever. It is not really an option...

  I am happy to buy an add-in, if anyone knows of any.

  Thank you

  Simon

  Simon

  After you create your slideshow in elements Organizer create Menu/slide show and its slideshow Editor, be sure to save in the organizer of items as a slideshow. To do this, look at the top left of the Organizer workspace of elements. In the line below the file programming, directly, edit view, and help Menus, click on 'save project '. The slide show will be save to the organizer of items as a"slide show". Look to the upper right of the thumbnail for slide show recorded in the Organizer workspace of elements. When you have your mouse cursor on this box, a pop-up with slide show project confirmation. In this format, you can double-click this vignette to reopen the slideshow in the slideshow Editor workspace of the workspace elements Organizer for further changes and re-registration in the Organizer workspace of elements. You can even this thumbnail in this place right click and select Edit with Premiere Elements (if you do not want to return to the slideshow Editor workspace.)

  Now, if you are in the slideshow editor and that you want to move the slide show done in Premiere Elements, then go to the exit at the top of this workspace option in organizing elements slideshow Editor, and select Edit with Premiere elements Editor. This will put your slide show on the chronology of the first elements in the form of video file together. Here's the beautiful part. If you want to make further changes to this video file together, right click on the video on the Timeline entire file and select and click Break Apart elements Organizer slideshow to give you the flexibility of the most important changes.

  Please note the following details, which should be included so that they are not a surprise...

  a. better manually set the Premiere Elements project preset before opening the organizer of items for the transfer to the slide show for Premiere Elements project. The following includes how to manually set the Premiere Elements project preset.

  First Elements ATR troubleshooting: PE11: accuracy of the project auto Preset setting (new project dialog box)

  Have you had time to read the Adobe document on the creation of slideshows.

  Adobe elements Organizer 11 * create slideshows (Windows only)

  Do not hesitate to ask if you need more clarification on what it is written. We can fill in details, including screenshots if necessary.

  Can't wait to hear of your progress.

  Thanks for the follow-up.

  RTA

• Automate the prefix in layers of files...

  Hi all

  I hope someone can help me with some automation. I have no idea about the scripts, I know just saying smart things can be made, I hope someone could point me in the right direction!

  I'm the superposition of the t-shirt on images of blank t-shirts designs.

  Each different color T-shirt (15 colors) is on an individual layer, so I have 15 layers.

  To create 15 images of a particular t-shirt design (an image for each color shirt), so I need to:

  (1) import a drawing on the top layer

  2) update all 15 compositions of layers

  3) click on the button "title of layers in files.

  (4) put a unique identifier in the file name prefix field

  (5) go to 1)

  So I guess my question is the following:

  Can I automate this? For example can I have the derived prefix the name of the layer? So I had to name just the top layer (with design on), and PS removed the layer name in the file name prefix field?

  And then I update all layers to automatically (when I put the next design on) rather than each of them choose and manually update?

  Any help appreciated for a novice script!

  Kind regards

  Mark

  If you put the top layer with a layer of smart design and then manually update the layer comps once and then save the file as a template, you can then use the Object layer-Smart menu element - replace Cotents... to change the design in a way that would not require more updated of the layer comps. Alteration of the content of a dynamic object affects not the layer would have status model as the addition of a new layer.

  In the layers to Files.jsx if you find the line

  var fileNameBody = exportInfo.fileNamePrefix;

  and replace with

  var fileNameBody = name of the upper layer app.activeDocument.layers[0].name;//

  The script will be no longer use the prefix of the dialog box and use the top layer as a prefix name instead.

  To automate the whole process would require the creation of a custom script. Layers to files script was not written to be called from another script.

• Automate the copy of several cells of different lines based on a non-single cell

  Hello

  I would like to automate the process for copy information in the columns of 'product', 'ref' and 'quantity' to another table in the sheet 'order' based on the text in the column "nr." I know it can be done with the help of the filter and the copy paste, but I would like to know if this can be automated, because there are many more tables in my actual document. The numbers ranging from 16/01/00 to a minimum of 16/200 then make an index for each column seems an unlikely solution?

  

  

  Thank you very much for your help.

  Kind regards

  Kim

  HI Kim,

  I see screenshots of two seemingly identical pictures. Its position, I could infer that 16/01/00 is the name of this table.

  I don't see a column named "nr."

  Please repost, with images of the two tables.

  Kind regards

  Barry

• HI - y at - it a command to automate the scroll for a long web page?

  I have a wall of gypsum, and it would be useful to show the info if possible to automate the scroll.

  In fact, someone else is already a: ScrollyFox.

• Automate the installation BT

  I install a bluetooth application on 700 laptops that have the Toshiba Bluetooth in them. I am trying to automate the setting up the security settings as well as to create a virtual port Server series. Can I use BTSecurityExport for this? I have tried to manually enter all the values of registry you guys create, but it does not work. It shows that the serial port exists, but does not allow me to connect. Regarding the security settings, the user interface shows that they are correct, but it still requires a PIN when you connect.

  I have try this tool also and it worked for me, but I have not configured additional COM ports. Is already an available COM port from the server that works by default. Why did you configure a second?
  The mentioned tool is just to restrict functions for security reasons as far as I can see.

• Automate the update of Windows Server R2 2012

  Hi all

  I am currently looking for a method to update automatically to our servers. Rather than use Windows update to install and reboot servers, I want to be able to automate the download and install the updates, but to impose when the server reboots automatically. I know that WSUS automatically installs updates but I don't think there is a way to control when the server should restart. Also apart from that, I know that servers come online without having to login to them manually. I think that the only way to go about this is with a script.

  Any help or insight is most appreciated. Thank you.

  It is a forum for specific consumers.

  You will find the Windows Server support in these forums: http://social.technet.microsoft.com/Forums/windowsserver/en-US/home

  You will find support for WSUS in this forum: http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverwsus

• How to automate the cutting through a visual basic 6.0 application tool?

  Original title: Visual basic 6.0

  How to automate the tool to cut through a visual basic 6.0 application. Or my visual basic 6.0 application is to take screenshots and save them as gif images, but the files are too big and take a long time to be sent by e-mail in real time. Please if someone could help, need a code in visual basic 6.0 to make these small files.

  Hello

  You can get support for development on the MSDN Forums tools.

  MSDN forums: Index

  http://social.msdn.Microsoft.com/forums/en-us/categories

  Concerning

• automate the backup of the computer while limiting the space used

  Hello
  I would like to help by using the Task Scheduler to automate a "computer backup."  I also use the "back up files" to back up my data files.  I want to use the same destination for two backups drive, but must limit the space used for each utility half the destination drive.  for example, I have a 150 GB C: drive.  the backup destination, F: drive is 500 GB.  I would use 250 for backup of the computer and 250 GB for backup of files.  is there a command in Task Scheduler that will automate the backup of the computer while minimizing space used for 250 GB?  Thank you!

  moved the post to the backup – Windows and Windows Server forum: http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/bbacc0df-3964-40ae-bf98-a3fe2c36314c

• Automate the backup of Config

  I'm looking to install a way to backup the configuration of my C370.  Currently, I know how to do it manually via the GUI.  Is it possible to automate this process and it backs up through the CLI?  I was searching through the CLI yesterday, but I couldn't find what would save the config on the command.  I guess if I could find the command that I could set up a job through our Kiwi CatTools to do.  I would like to know if anyone knows how to do this, or if you have found another way to do this effectively.

  Thank you

  Mike

  Hi Mike,.

  There are actually two ways to do this.

  You can save the configuration of the CLI by using the saveconfig command. You can load a configuration file using the loadconfig command. I would like to run these commands first, just so that you can see the process. Basically, you can script something around these commands that could do the job.

  We also have a section of Nice knowledge base that covers this topic as well. The approach is a little differnet but the results are the same.

  How can I schedule or automate the backup of the file of configuration XML from my device?  Where he lives?  How to do a scheduled backup of the configuration of a Windows system file?

  Environment:

  -ESA with AsyncOS 6.x or later.
  -A designated host for the introduction and the storage of backups.

  NOTES:

  Familiarity with the BONES of script and forecasts of the tasks is necessary to understand and implement these tasks safely.  Please understand that many of these concepts are beyond the scope of the IronPort customer support and these sample scripts are certainly not taken in charge.  Although these steps have been successfully tested, this article is mainly for purposes of demonstration and illustration.

  The configuration file dynamically generated during the use of the recording or email of the CLI or GUI configuration tools.  To have an effective backup, it is best to "unmask" passwords, which allows you to place a ground form of passwords for local administrative accounts in the device configuration file.  For this reason, we can not simply copy a flat file "running Setup" of the device.  This method allows us to access the device first, issue a command to dynamically build the current configuration, and either save or mail a copy of this file somewhere remotely, without any intervention from the user.  Once this is done, we can then repeat or schedule this task to occur on a regular basis.

  Quickly and automatically save the configuration with the passwords exposed files:

  (1) generate a SSH key pair to use.  Verify that you can access your device via SSH without having to enter a password.  Details on this operation is provided in article #283.

  (2) create script to connect to the device, save the config and copy (or by mail).  Two simple examples written in BASH:

  Example #1: Saving the configuration to a specific host
  #! / bin/bash
  # This saves the config and then he copies locally via SCP in a directory called backup/config-ironport
  HOSTNAME = test.com
  USER name = admin
  FILENAME = "ssh $USERNAME@$HOSTNAME "saveconfig Yes"|" grep xml | cut f 3 - d "" ' "
  SCP $USERNAME@$HOSTNAME:./configuration/$FILENAME./ironport/config-backups /.

  Example #2: Emailing an email address configuration
  #! / bin/bash
  # This sends the config to MAILDEST
  HOSTNAME = MX.test.com
  USER name = admin
  [email protected] / * /.
  SSH $USERNAME@$HOSTNAME 'mailconfig $MAILDEST Yes.

  NOTE: this similar logic can be applied in any scripting language OS such as VB scripts or batch for Windows.  These scripts are intended as examples only rudimentary.

  (3) use cron or or scheduling tool to start work on a regular basis.  Services like cron or Task Scheduler in Windows are easy tools that can be used to automate simple jobs like that.  For example, the * NIX CRON configuration file follows this format:

  minute (0-59), hour (0-23, 0 = midnight), day (1-31), month (1-12), day of the week (0-6, 0 = Sunday), command

  So a good example to run this script every day at 02:00 would look like:
  00 02 * /location/your_script.sh

  Otherwise, here is another method to automate a backup of the configuration.

  How to do a scheduled backup of the configuration of a Windows system file?

  With the following procedure, you can save the configuration on a regular basis of a Windows system file.

  1 install the emulator of terminal 'PuTTY' under C:\

  2. create a text file with the following line and name it "send_config.txt" and place it under C:\ (Change of [email protected] / * / to the email address you want the configuration file must be sent to)

  mailconfig [email protected] / * /.
  3. create a text file with the following lines and name it "send_config_batch.bat" and place it under C:\
  (Change the "hostname" for the host name can be resolved or IP address of your device and the "password" to your real password for the admin account).

  C:\putty.exe-SSH hostname-l - pw admin and password C:\send_config.txt m
  output
  
  4. Add "send_config_batch.bat" to the scheduled task window.

  The Configuration file will be sent to the address specified in the "send_config.txt".

  I hope this helps!

  Christopher C Smith

  CSE
  Cisco IronPort customer

• Automate the Purge on HFM newspapers and the impact

  Hi all

  Some of our customers have their newspapers more considerable HFM, and is having a direct impact on the performance of HFM. I read that once the line count batteries beyoung 500 000 there is a degradation in performance. DB servers our MS SQL.

  I was wondering if there is anyway to automate the purge of the newspaper since the backend tables. I want to keep the last 90 days of logs and remove all the other stuff. Oracle is very vague on the subject, and I couldn't find good sources of documentation. My query is related 11.1.1 and more

  (1) automation of purge weekly or monthly will be beneficial?

  (2) how can I automate the purge of the DB on the tables?

  (3) is there an impact on HFM when the purge occurs?

  (4) is there an impact on the users/application if the application if it is open when the purge routine occurs?

  Appreciate any help/documentation regarding the reach this goal.

  Hello. Oracle is vague about what they don't know what databases are running on the hardware. I had a customer who does not see performance issues until their audit log data was approximately 80,000,000 records. Many people use a SQL process to archive off the coast and truncate tables. Others use the utility provided with HFM to do. Whatever it is, having a few months of online documents and then extract / truncating should be fine. Ideally users are not in the system, or at least not make data changes (loading, magazines, input, etc.).

  Eric

• 11.1.2.3.00 recommended to automate the Migration of production to Test

  Hi all.

  I would like to migrate the following items of Prod to Test and want to automate completely.

  Shared services

  Manager of Calc

  Planning

  Essbase

  HFM

  EPMA

  Can anyone provide a high level of how they would be fully automate all of these objects, including the automation of deployment of applications of EPMA and in what order?

  In addition, guidance on what to monitor (i.e. the issues or security) will be greatly appreciated.

  The recommended route is to use LCM which has a command line utility, so can be automated, LCM also has the ability to export/import all objects by using a utility.

  EPMA also offers a command line utility, so you can automate the deployment.

  HFM, you can use the utility to copy app.

  The problem you face is that LCM don't really remove it from target to make it work much better when it's a clean environment if you want to source and target to match.

  See you soon

  John