Automated kickstart install fails with no file or directory; ' / tardisks/net_qlcn.v00 '

I try to install ESXi 5.5u2 via kickstart on an ISO. I added the CF and Eth drivers for the card to ISO using imagebuilder, and moves very well. If I then try to change the ISO with the kickstart file, updated the boot.cfg and isolinux.cfg, the installation will fail with the above error.

Work:

ESXi vanilla ISO, mount iso, install copy files to the directory add ks.tgz, boot.cfg, isolinux.cfg to the directory, create iso using genisoimage. Kickstart unattended installation.

Work:

ImageBuilder ISO with drivers 8242, interactive installation

Does not:

ImageBuilder iso, copy the Directory installation files, add ks.tgz, boot.cfg, isolinux.cfg to the directory, create iso using genisoimage. Kickstart unattended installation.

Once the installation fails I can go down the directory tree and confirm that there are no net_qlcn.v00 in /tardisks.

Andreas Peetz seems to have this problem with its gui customizer, but I think not that the fix posted by glroman apply here. =(

At this point, it seems that the installer is not extracting the net_qlcn.v00 for some reason any

Found the problem: my generation process used the same boot.cfg for each generation, rather than pull the boot.cfg out of the norm iso source and changes before the reconstruction of the iso.

Tags: VMware

Similar Questions

  • Vista SP2 x 64 install failed with error 80004005

    I tried to install the SP2 for Vista X 64 (KB948465) four times.  The most recent installation attempt failed after
    (1) created a new administrator account and did the following...
    (2) uninstalled CA Antivirus Suite (no other antivirus installed).
    (3) stop the Windows Update service, renamed %windir%\SoftwareDistribution for... \SoftwareDistributionOld, restarted update service, restarted.
    (4) installed and run CheckSur (can provide the journal).
    (5) restarted in clean boot mode.
    6) attempted to reinstall SP2.

    In all attempts, installation seems to be completed, during the restart of the installation of all 3 full updates to 100%.  However, the message then States that the installation failed and the original configuration was recovering.

    I have a new a6700f desktop HP Pavillion, AMD Phenom X 4 9150e Quad Core clocked at 1.8 GHz, 4 GB RAM, 500 GB HARD drive; Windows Vista Edition Home Premium x 64 SP1, nVidia Quadro FX 370 video card.

    Service pack Windows Vista and Windows Server 2008 install fails with error 0x80004005
    http://support.Microsoft.com/kb/971204 TaurArian [MVP] 2005-2010 - Update Services

  • Offline files Win7 "Sync failed with offline files. Interrupted offline files synchronization or just jump the incriminated files?

    I use offline files in Windows 7 on a corporate network.  Usually, it works very well, but sometimes, when someone else uses a file I get the message in sync results "Synchronization failed with offline files" and the files in question are wrong with the message "the process cannot access the file because it is being used by another process".  I want to know is was it interrupted the entire synchronization process or if it is complete and just jump the files in question?

    Hello

    That your computer is under domain, you must contact the technet forum, where we have of the support technicians who are well equipped with the knowledge on the issues of domain, do visit the link provided below.

    http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads

    Thanks and greetings

  • Start WebLogic Server LD.so.1:: Launcher: fatal: libstdc ++. so.5: open failed: no such file or directory

    Hello

    I met the following WebLogic errors during startup. I use WebCenter Content Server 11.1.1.8 or WebLogic 10.3.6. I managed to start the server and not having problems so far, but I'm curious about the error.

    System = SunOS

    Output = 5.10

    KernelID = Generic_150401-11

    LD.so.1:: Launcher: fatal: libstdc ++. so.5: open failed: no such file or directory

    LD.so.1:: Launcher: fatal: libstdc ++. so.5: open failed: no such file or directory

    /opt/Oracle/middleware/user_projects/domains/WEBCENTER_CONTENT_DOMAIN/bin/startWebLogic.sh: =: $: not found

    export ALT_TYPES_DIR

    export ANT_CONTRIB

    export ANT_HOME

    export APPLICATIONS_DIRECTORY

    export ARDIR

    export BEA_HOME

    export BEA_JAVA_HOME

    export CLASSPATHSEP

    export CLUSTER_PROPERTIES

    export COHERENCE_HOME

    export COMMON_COMPONENTS_HOME

    export CUSTOM_MEM_ARGS_32BIT

    export CUSTOM_MEM_ARGS_64BIT

    export DATABASE_CLASSPATH

    export DEBUG_PORT

    export DERBY_CLASSPATH

    export DERBY_FLAG

    export DERBY_HOME

    export DERBY_OPTS

    export DERBY_SYSTEM_HOME

    export DERBY_TOOLS

    export DOMAIN_HOME

    export EXTRA_JAVA_PROPERTIES

    export FEATURES_DIR

    export FMWCONFIG_CLASSPATH

    export FMWLAUNCH_CLASSPATH

    export JAVA_DEBUG

    Export JAVA_HOME

    Export JAVA_OPTIONS

    export JAVA_PROFILE

    export JAVA_PROPERTIES

    export JAVA_USE_64BIT

    export JAVA_VENDOR

    export JAVA_VM

    export LD_LIBRARY_PATH

    export LONG_DOMAIN_HOME

    export MEM_ARGS

    export MEM_ARGS_32BIT

    export MEM_ARGS_64BIT

    export MEM_DEV_ARGS

    export MEM_MAX_PERM_SIZE

    export MEM_MAX_PERM_SIZE_32BIT

    export MEM_MAX_PERM_SIZE_64BIT

    export MEM_PERM_SIZE

    export MEM_PERM_SIZE_32BIT

    export MEM_PERM_SIZE_64BIT

    export MODULES_DIR

    export MW_HOME

    export OBJECT_MODEL

    export OCP371_PATCH_CLASSPATH

    export OCP371_PATCH_EXT_DIR

    export OCP371_PATCH_LIBPATH

    export OCP371_PATCH_PATH

    export ORACLE_DOMAIN_CONFIG_DIR

    export PATCH_CLASSPATH

    export PATCH_LIBPATH

    export PATCH_PATH

    export PATH

    export PATHSEP

    export POST_CLASSPATH

    export PRE_CLASSPATH

    export PRODUCTION_MODE

    export PROTOCOL_HANDLERS

    export SAMPLES_HOME

    export SERVER_CLASS

    Export SERVER_NAME

    export SUN_JAVA_HOME

    export UCM_ORACLE_HOME

    export WEBLOGIC_CLASSPATH

    export WEBLOGIC_EXTENSION_DIRS

    export WLS1036_PATCH_CLASSPATH

    export WLS1036_PATCH_EXT_DIR

    export WLS1036_PATCH_LIBPATH

    export WLS1036_PATCH_PATH

    export WLS_HOME

    export WLS_JDBC_REMOTE_ENABLED

    export WLS_MEM_ARGS_32BIT

    export WLS_MEM_ARGS_64BIT

    export WL_HOME

    export XMS_JROCKIT_32BIT

    export XMS_JROCKIT_64BIT

    export XMS_SUN_32BIT

    export XMS_SUN_64BIT

    export XMX_JROCKIT_32BIT

    export XMX_JROCKIT_64BIT

    export XMX_SUN_32BIT

    export XMX_SUN_64BIT

    export debugFlag

    export doExitFlag

    export enableHotswapFlag

    export iterativeDevFlag

    export logErrorsToConsoleFlag

    export testConsoleFlag

    export verboseLoggingFlag

    LD.so.1:: Launcher: fatal: libstdc ++. so.5: open failed: no such file or directory

    LD.so.1:: Launcher: fatal: libstdc ++. so.5: open failed: no such file or directory

    .

    .

    Memory of JAVA arguments: - Xms2048M-Xmx2048M - XX: MaxPermSize = 512M-Xloggc:/logs/console/gc/UCM_AdminServer.gc.log.151106-103904 - XX: + PrintGC - XX: + PrintGCDetails - XX: + PrintGCDateStamps

    .

    Start mode of WLS = Production

    .

    CLASSPATH=/opt/Oracle/Middleware/oracle_common/modules/oracle.jdbc_11.1.1/ojdbc6dms.jar:/opt/Oracle/Middleware/patch_wls1036/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/opt/Oracle/Middleware/patch_ocp371/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/apps/webcenter/jdk/lib/tools.jar:/opt/Oracle/Middleware/wlserver_10.3/server/lib/weblogic_sp.jar:/opt/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.jar:/opt/Oracle/Middleware/modules/features/weblogic.server.modules_10.3.6.0.jar:/opt/Oracle/Middleware/wlserver_10.3/server/lib/webservices.jar:/opt/Oracle/Middleware/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/ opt/Oracle/Middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar:/opt/Oracle/Middleware/oracle_common/soa/modules/commons-cli-1.1.jar:/opt/Oracle/Middleware/oracle_common/soa/modules/oracle.soa.mgmt_11.1.1/soa-infra-mgmt.jar:/opt/Oracle/Middleware/oracle_common/modules/oracle.jrf_11.1.1/jrf.jar:/opt/Oracle/Middleware/wlserver_10.3/common/derby/lib/derbyclient.jar:/opt/Oracle/Middleware/wlserver_10.3/server/lib/xqrl.jar:/opt/Oracle/Middleware/Oracle_ECM1/ucm/idc/jlib/idcloader.jar:/opt/Oracle/Middleware/Oracle_ECM1/ucm/idc/components/NativeOsUtils/classes-NativeOsUtils.jar

    .

    PATH=/opt/Oracle/Middleware/wlserver_10.3/server/bin:/opt/Oracle/Middleware/modules/org.apache.ant_1.7.1/bin:/apps/webcenter/jdk/jre/bin:/apps/webcenter/jdk/bin:/usr/sbin:/usr/bin:/usr/openwin/bin:/usr/ucb:/sbin:/bin

    .

    ***************************************************

    * To start WebLogic Server, use a username and *.

    * password assigned to an administrator-level user.  For *.

    * server administration, using the WebLogic Server *.

    * console in http://hostname/ReportServer: port/console         *

    ***************************************************

    from weblogic with the Java version:

    Java version "1.7.0_79".

    Java (TM) SE Runtime Environment (build 1.7.0_79 - b15)

    Java hotspot Server VM (build 24, 79 - b02, mixed mode)

    WLS starting with line:

    /Apps/WebCenter/JDK/bin/Java-serveur-Xms2048M-Xmx2048M - XX : MaxPermSize = 512 M-Xloggc:/logs/console/gc/UCM_AdminServer.gc.log.151106-103904 - XX : + PrintGC - XX : + PrintGCDetails - XX : + PrintGCDateStamps-Dweblogic.Name=AdminServer-Djava.security.policy=/opt/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.policy-Dweblogic.ProductionModeEnabled=true-da-Dplatform.home=/opt/Oracle/Middleware/wlserver_10.3-Dwls.home=/opt/Oracle/Middleware/wlserver_10.3/server-Dweblogic.home=/opt/Oracle/Middleware/wlserver_10.3/server-Dcommon.components.home=/opt/Oracle/Middleware/oracle_common-Djrf.version=11.1.1-Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger-Ddomain.home=/opt/Oracle/Middleware/user_projects/domains/WEBCENTER_CONTENT_DOMAIN-Djrockit.optfile=/opt/Oracle/ Middleware/oracle_common /modules/Oracle.jrf_11.1.1/jrocket_optfile.txt-Doracle.server.config.dir=/opt/Oracle/Middleware/user_projects/domains/WEBCENTER_CONTENT_DOMAIN/config/fmwconfig/servers/AdminServer-Doracle.domain.config.dir=/opt/Oracle/Middleware/user_projects/domains/WEBCENTER_CONTENT_DOMAIN/config/fmwconfig-Digf.arisidbeans.carmlloc=/opt/Oracle/Middleware/user_projects/domains/WEBCENTER_CONTENT_DOMAIN/config/fmwconfig/carml-Digf.arisidstack.home=/opt/Oracle/Middleware/user_projects/domains/WEBCENTER_CONTENT_DOMAIN/config/fmwconfig/arisidprovider-Doracle.security.jps.config=/opt/Oracle/Middleware/user_projects/domains/WEBCENTER_CONTENT_DOMAIN/config/fmwconfig/jps-config.xml-Doracle.deployed.app.dir=/opt/Oracle/Middleware/user_projects/domains/ WEBCENTER_CONTENT_DOMAIN/servers/AdminServer/tmp/_WL_user - Doracle.deployed.app.ext=/- -Dweblogic.alternateTypesDirectory=/opt/Oracle/Middleware/oracle_common/modules/oracle.ossoiap_11.1.1,/opt/Oracle/Middleware/oracle_common/modules/oracle.oamprovider_11.1.1,/opt/Oracle/Middleware/oracle_common/modules/oracle.jps_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Ducm.oracle.home=/opt/Oracle/Middleware/Oracle_ECM1 -Dem.oracle.home=/opt/Oracle/Middleware/oracle_common -Djava.awt.headless=true -Dweblogic.management.discover=true -Dwlw.iterativeDev=false -Dwlw.testConsole=false -Dwlw.logErrorsToConsole=false -Dweblogic.ext.dirs=/opt/Oracle/Middleware/patch_wls1036/profiles/default/sysext_manifest_classpath:/opt/Oracle/Middleware/patch_ocp371/profiles/default /sysext_manifest_classpath weblogic. Server

    < 6 November 2015 10:39:08 SGT > < Info > < security > < BEA-090905 > < disabling CryptoJ JCE provider auto-intégrité for better startup performance. To allow this control, enter - Dweblogic.security.allowCryptoJDefaultJCEVerification = true >

    < 6 November 2015 10:39:09 SGT > < Info > < security > < BEA-090906 > < change the default Random Number Generator in RSA CryptoJ of ECDRBG to FIPS186PRNG. To disable this change, specify - Dweblogic.security.allowCryptoJDefaultPRNG = true >

    < 6 November 2015 10:39:09 SGT > < Info > < WebLogicServer > < BEA-000377 > < since WebLogic Server Java hotspot Server VM Version 24, 79 - b02 of Oracle Corporation >

    < 6 November 2015 10:39:12 SGT > < Info > < management > < BEA-141107 > < Version: WebLogic Server 10.3.6.0 Mar 15 Nov 08:52:36 PST 1441050 2011 >

    < 6 November 2015 10:39:16 SGT > < opinion > < WebLogicServer > < BEA-000365 > < server status changed initially >

    < 6 November 2015 10:39:16 SGT > < Info > < WorkManager > < BEA-002900 > < self-adjusting Initializing of thread pool >

    < 6 November 2015 10:39:16 SGT > < opinion > < Log Management > < BEA-170019 > < server log file /opt/Oracle/Middleware/user_projects/domains/WEBCENTER_CONTENT_DOMAIN/servers/AdminServer/logs/AdminServer.log is open. All events in the log server-side will be written to this file. >

    < 6 November 2015 10:39:30 SGT > < opinion > < security > < BEA-090082 > < security initialization using security realm myrealm. >

    < 6 November 2015 10:39:30 SGT > < opinion > < security > < BEA-090083 > < identity of start of storage in the file: /opt/Oracle/Middleware/user_projects/domains/WEBCENTER_CONTENT_DOMAIN/servers/AdminServer/security/boot.properties >

    < 6 November 2015 10:39:32 SGT > < WARNING > < Store > < BEA-280109 > < unable to load native library wlfileio for the persistent store file '_WLS_AdminServer '. The Bank will use I/O in the buffer. The store is still in business in a point of view transactional secure synchronous mode. See store open log messages for requested and final write policies. >

    < 6 November 2015 10:39:39 SGT > < opinion > < WebLogicServer > < BEA-000365 > < server changed to STANDBY status >

    < 6 November 2015 10:39:39 SGT > < opinion > < WebLogicServer > < BEA-000365 > < server status changed initially >

    < 6 November 2015 10:39:47 SGT > < WARNING > < security > < BEA-090668 > < ignored the role 'Admin' resource deployment ' type = < url >, application is DMS Application #11.1.1.1.0, contextPath = / dms, uri = / ">".

    < 6 November 2015 10:39:48 SGT > < WARNING > < J2EE > < BEA-160195 > < application version of the lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the em of the application is not versioned. >

    < 6 November 2015 10:39:53 SGT > < WARNING > < J2EE > < BEA-160140 > < optional references package suspense (in META-INF/MANIFEST. (MF): [Extension name: oracle.rules referenced from: / opt/Oracle/Middleware/user_projects/domains/WEBCENTER_CONTENT_DOMAIN/servers/AdminServer/tmp/_WL_user/emai/xalnv4]. Check that the referenced optional package has been deployed as a library. >

    < 6 November 2015 10:39:55 SGT > < error > < org.apache.beehive.netui.pageflow.internal.AdapterManager > < BEA-000000 > < ServletContainerAdapter manager not initialized successfully. >

    < 6 November 2015 10:39:57 SGT > < WARNING > < oracle.dms.collector > < DMS-50966 > < table metric "reports: Reports_Server_Information ' has no key column.  It will not be seen. >

    < 6 November 2015 10:39:57 SGT > < WARNING > < oracle.dms.collector > < DMS-50966 > < table metric "reports: Reports_Server_Performance ' has no key column.  It will not be seen. >

    < 6 November 2015 10:39:57 SGT > < WARNING > < oracle.dms.collector > < DMS-50966 > < table metric "reports: Reports_Server_Response ' has no key column.  It will not be seen. >

    < 6 November 2015 10:39:57 SGT > < WARNING > < oracle.dms.collector > < DMS-50966 > < table metric "reports: Reports_Servlet_Response ' has no key column.  It will not be seen. >

    < 6 November 2015 10:39:57 SGT > < WARNING > < oracle.dms.collector > < DMS-50966 > < table metric "reports: Remote_Bridge_Elements ' has no key column.  It will not be seen. >

    < 6 November 2015 10:39:57 SGT > < WARNING > < oracle.dms.collector > < DMS-50966 > < metric "webcache:request_filter_denied_stats" table has no key column.  It will not be seen. >

    PostInstallConfigIntegration:oracle_ias_farm target auth check is performed.

    < 6 November 2015 10:40:06 SGT > < WARNING > < oracle.adfinternal.view.faces.partition.FeatureUtils > < ADF_FACES-30130 > < without taking into account the dependence of the feature on the function "AdfDvtCommon".  There is no such feature. >

    < 6 November 2015 10:40:07 SGT > < WARNING > < oracle.mds > < BEA-000000 > < by default CharSet US-ASCII is not a unicode character set. Filenames with non-ASCII characters may not work as expected. Check regional settings. >

    < 6 November 2015 10:40:11 SGT > < WARNING > < org.apache.myfaces.trinidadinternal.config.GlobalConfiguratorImpl > < BEA-000000 > < Configurator services already initialized. >

    < 6 November 2015 10:40:19 SGT > < opinion > < Log Management > < BEA-170027 > < server has established the connection with the Service of diagnosis level domain successfully. >

    < 6 November 2015 10:40:19 SGT > < opinion > < WebLogicServer > < BEA-000365 > < server status changed to ADMIN >

    < 6 November 2015 10:40:19 SGT > < opinion > < WebLogicServer > < BEA-000365 > < Server State has changed for RESUMING >

    < 6 November 2015 10:40:20 SGT > < opinion > < Server > < BEA-002613 > < Channel "Default [2]" is now listening on 192.21.102.239:7005 for iiop, t3, ldap, snmp, http protocols. >

    < 6 November 2015 10:40:20 SGT > < opinion > < Server > < BEA-002613 > < Channel "Default [4]" now listen on 10.253.163.194:7005 for iiop, t3, ldap, snmp, http protocols. >

    < 6 November 2015 10:40:20 SGT > < opinion > < Server > < BEA-002613 > < Channel "[1] by default ' is now listening on 192.24.143.146:7005 for iiop, t3, ldap, snmp, http protocols. >

    < 6 November 2015 10:40:20 SGT > < opinion > < Server > < BEA-002613 > < Channel "Default" is now listening on 192.24.143.2:7005 for iiop, t3, ldap, snmp, http protocols. >

    < 6 November 2015 10:40:20 SGT > < opinion > < Server > < BEA-002613 > < channel 'by default [5]' now listen on 127.0.0.1:7005 for iiop, t3, ldap, snmp, http protocols. >

    < 6 November 2015 10:40:20 SGT > < opinion > < Server > < BEA-002613 > < Channel "Default [3]" now listen on 192.24.143.68:7005 for iiop, t3, ldap, snmp, http protocols. >

    < 6 November 2015 10:40:20 SGT > < opinion > < WebLogicServer > < BEA-000329 > < started WebLogic Admin Server "AdminServer' field 'WEBCENTER_CONTENT_DOMAIN' running in Production Mode >

    < 6 November 2015 10:40:20 SGT > < opinion > < WebLogicServer > < BEA-000365 > < Server State has changed in the RACE >

    < 6 November 2015 10:40:20 SGT > < opinion > < WebLogicServer > < BEA-000360 > < server started operation >

    < 6 November 2015 10:48:36 SGT > < warning > < WebLogicServer > < BEA-000396 > < server shutdown was requested by admin >

    < 6 November 2015 10:48:36 SGT > < opinion > < WebLogicServer > < BEA-000365 > < server status changed suspension >

    < 6 November 2015 10:48:36 SGT > < opinion > < WebLogicServer > < BEA-000365 > < server status changed to ADMIN >

    < 6 November 2015 10:48:36 SGT > < opinion > < WebLogicServer > < BEA-000365 > < server status changed to SHUTTING_DOWN >

    < 6 November 2015 10:48:36 SGT > < opinion > < Server > < BEA-002607 > < was channel ' Default [2] "listening on 192.21.102.239:7005 > stop."

    < 6 November 2015 10:48:36 SGT > < opinion > < Server > < BEA-002607 > < was channel ' Default [1] "listening on 192.24.143.146:7005 > stop."

    < 6 November 2015 10:48:36 SGT > < opinion > < Server > < BEA-002607 > < was "Default" channel to listen on 192.24.143.2:7005 > stop.

    < 6 November 2015 10:48:36 SGT > < opinion > < Server > < BEA-002607 > < was channel ' Default [5] "listening on 127.0.0.1:7005 > stop."

    < 6 November 2015 10:48:36 SGT > < opinion > < Server > < BEA-002607 > < was channel ' Default [4] "listening on 10.253.163.194:7005 > stop."

    < 6 November 2015 10:48:36 SGT > < opinion > < Server > < BEA-002607 > < channel "Default [3]" was listening on 192.24.143.68:7005 > stop.

    Have you followed the installation guide and completed all the pre-requisutes?

    Please check:

    ls-l /usr/lib64/libstdc++.so.5

  • KB2656353 install fails with error 0 x 643

    Dear Microsoft support community,

    (a) I have Windows XP Professional SP3.  I haven't used this computer
    in almost a year, so the first thing I did was to hang the
    computer, connect to the Internet and run Microsoft update.
    There were 78 updates and 75 of them were installed successfully.
    (b) when I tried to install KB2656353, the installation failed with error
    0 x 643.
    (c) Googling turned up to http://support.microsoft.com/kb/976982 .
    I tried the Microsoft Fix it 50123, but which did not help.
    (d) I repaired then the .NET 4 Client Setup.  No joy.
    (e) I ran the auditor of .NET tool to
       http://blogs.msdn.com/b/astebner/archive/2008/10/13/8999004.aspx

    And he noted "the check is successful" for
       
    .NET 1.1 SP1
    .NET 2.0 SP2
    .NET 3.0 SP2
    .NET 3.5 SP1
    .NET 4 client
    .NET 4 full

    (f) I have concluded that uninstall and then reinstall the whole .NET
    framework was not claimed for now, since it does not seem
    as indicated in KB 976982 corrupted.

    (g) I checked the registry for .NET 1.1 hotfixes listed issues
    in http://blogs.msdn.com/b/astebner/archive/2004/11/23/268934.aspx
    in the "Info 9002..." section, but I have not found any.

    (h) I downloaded the update in a separate file,
    NDP1.1sp1 - KB2656353 - X 86 .exe, to http://download.microsoft.com,.
    and tried to run as a standalone program, but it stops almost
    immediately.  By redirecting the logging to a local file, I find
    the update has not been installed, but I do not know how to interpret
    the log file, which is much too large to be able to post it here in its entirety.

    How can I get this update to install?

    Related post on the same question:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/cant-install-update-kb2656353/744caf0c-4450-40DE-BB8F-cf4ca2ee565d

  • Windows 7 clean install fails with ACPI.sys and error blue screen stop: 0x0000007E.

    I'm trying to do a clean install of windows 7 Professional (32-bit) on my laptop ASUS X61SL. Initially there was Vista Home Premium (32-bit) running on this laptop.

    After the start of the boot and windows 7 by loading files and starting windows comes the blue screen saying:

    STOP: 0x0000007E (0xC0000420, 0x8EB256C6, 0x8A386640; ox8A386170)
    ACPI.sys - address 8EB256C6 base at 8EAD7000, Datestamp 4CE78F21
    I tried an update of the BIOS already and a full erase of the disk which has been recommended by the ASUS support. Nothing worked, and not even the ASUS support has other ideas how to get Windows 7 to run.

    OK, how much RAM have you?

    I found this information:

    However, I remembered seeing something on the Internet about Microsoft 64-bit being unhappy with 4 GB of ram during the installation process of the systems... .then I got 2 GB of ram and the installation went OK! I will give the memory later.

    Source:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/a-clean-install-of-win-7-fails-with-acpisys-and/edca086c-D798-4b78-805d-301dcc8535a0

    I know - you try to install the Win7 SP1 32 bit only, but you can try it.

    LC

  • Photoshop CC install fails with "USS has quit unexpectedly.

    Since the Office application creative cloud [Windows 7] failed with a spinning wheel permanently I tried the various solutions found here. They involved all uninstall, running cleaner, re-installing Office CC... Try to reinstall Photoshop CC 2015 then fails, [stops at some percentage]. I tried the more specific operations available here [errors 'Exit Code 6' and ' exit 7 "Code install Adobe Creative Cloud, CS6, CS5.5, Premiere Elements and Photoshop Ele..."] without success. [Although cannot claim all the redistributable repairs and modified startups were completed successfully.]

    The relevant part of the journal seems to be:

    10/03/16 18:54:43:215 | [INFO] |  | OOBE. OF |  |  |  | 1060 | *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

    10/03/16 18:54:43:215 | [INFO] |  | OOBE. OF |  |  |  | 1060 | Operation of the installer: PayloadInstaller

    10/03/16 18:54:43:215 | [INFO] |  | OOBE. OF |  |  |  | 1060 | *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

    10/03/16 18:54:43:215 | [INFO] |  | OOBE. OF |  |  |  | 1060 | Request to install the payload

    10/03/16 18:54:43:215 | [INFO] |  | OOBE. OF |  |  |  | 1060 | Payload ARKEngine Adobe Photoshop CC 2015 Core_16.1.2_AdobePhotoshop16 - Core_x64 16.1.2.0 {F217525B-30EB-42F2-A730-F61139264DB5}: the call of the path C:\Program Files (x 86) \Common Files\Adobe\OOBE\PDApp\DECore\DE6\resources

    10/03/16 18:54:43:386 | [INFO] |  | OOBE. OF |  |  |  | 1060 | Extraction of asset:C:\Users\Misha\AppData\Local\Temp\Adobe\AAMUpdater\AdobePhotoshopCC2015-16.0\16.1.2 \setup\payloads\AdobePhotoshop16-Core_x64-130116074228\Assets2_1.zip

    10/03/16 18:54:43:386 | [INFO] |  | OOBE. OF |  |  |  | 1060 | Affecting false in the unzipper file open option

    10/03/16 18:54:43:449 | [INFO] |  | OOBE. OF |  |  |  | 1060 | Extraction of asset:C:\Users\Misha\AppData\Local\Temp\Adobe\AAMUpdater\AdobePhotoshopCC2015-16.0\16.1.2 \setup\payloads\AdobePhotoshop16-Core_x64-130116074228\Assets1_1.zip

    10/03/16 18:54:43:449 | [INFO] |  | OOBE. OF |  |  |  | 1060 | Affecting false in the unzipper file open option

    10/03/16 18:57:05:420 | [ERROR] |  | OOBE. OF |  |  |  | 1480 | ASU has quit unexpectedly.

    10/03/16 18:57:29:740 | [INFO] |  | OOBE. OF |  |  |  | 1060 | All self-extracting assets. Number of active: 2

    10/03/16 18:57:29:740 | [INFO] |  | OOBE. OF |  |  |  | 1060 | CustomizedPatch property not found in the database

    10/03/16 18:57:29:740 | [INFO] |  | OOBE. OF |  |  |  | 1060 | Begin the installation of payload to C:\Users\Misha\AppData\Local\Temp\Adobe\AAMUpdater\AdobePhotoshopCC2015-16.0\16.1.2\setup \payloads\AdobePhotoshop16-Core_x64-130116074228\Install.db

    10/03/16 18:58:32:952 | [INFO] |  | OOBE. OF |  |  |  | 1060 | Definition of authorization to: C:\Program Files\Adobe\Adobe Photoshop CC 2015\Presets\Deco\Picture Frame.jsx group / user: BuiltinGuests access: GENERIC_ALL (Seq 1450)

    10/03/16 18:58:32:952 | [INFO] |  | OOBE. OF |  |  |  | 1060 | Definition of authorization to: C:\Program Files\Adobe\Adobe Photoshop CC 2015\Presets\Deco\Picture Frame.jsx group / user: BuiltinUsers access: GENERIC_ALL (Seq 1451)

    10/03/16 18:58:33:607 | [INFO] |  | OOBE. OF |  |  |  | 1060 | Definition of authorization to: C:\Program Files\Adobe\Adobe Photoshop CC 2015\Presets\Deco\_Deco Menu.jsx group / user: BuiltinGuests access: GENERIC_ALL (Seq 1472)

    10/03/16 18:58:33:607 | [INFO] |  | OOBE. OF |  |  |  | 1060 | Definition of authorization to: C:\Program Files\Adobe\Adobe Photoshop CC 2015\Presets\Deco\_Deco Menu.jsx group / user: BuiltinUsers access: GENERIC_ALL (Seq 1473)

    10/03/16 18:58:34:325 | [INFO] |  | OOBE. OF |  |  |  | 1060 | Evaluate condition # 1 (seq. 1500)

    10/03/16 18:58:34:325 | [INFO] |  | OOBE. OF |  |  |  | 1060 | Condition failed (seq. 1500)

    10/03/16 18:58:34:325 | [INFO] |  | OOBE. OF |  |  |  | 1060 | Evaluate condition # 1 (Seq 1501)

    10/03/16 18:58:34:325 | [INFO] |  | OOBE. OF |  |  |  | 1060 | Condition failed (Seq 1501)

    10/03/16 18:58:48:271 | [INFO] |  | OOBE. OF |  |  |  | 1060 | Evaluate condition # 1 (Seq 1834)

    10/03/16 18:58:48:271 | [INFO] |  | OOBE. OF |  |  |  | 1060 | Condition failed (Seq 1834)

    10/03/16 18:58:48:271 | [INFO] |  | OOBE. OF |  |  |  | 1060 | Evaluate condition # 1 (Seq 1835)

    10/03/16 18:58:48:271 | [INFO] |  | OOBE. OF |  |  |  | 1060 | Condition failed (Seq 1835)

    Assets1_1.zip file is present in the correct path. To test the integrity of the file I can unzip it manually. The UN - zip seems to work without error.

    Try to run Photoshop then fails with components not found.

    It seems that many people have similar problems. Solutions or workarounds?

    Yet once, responding to my own post. Success! [But not sure exactly why...] kglad and Brucgovn suggestions were helpful. Thank you! Repair or reinstall all Microsoft Visual C++ Redistributable helped some.

    Finally, in desperation, I removed everything even vaguely smell of "Adobe,"[not including the Acrobat documents.]" It's all applications, services, nothing in the folder AppData Local or roaming Adobe and the C:\Users\Misha\AppData\Local\Temp\{708A6B05-0886-43ED-9EB0-A6E346EE3A1F} file. It takes re-start to remove already running services.

    Then, I have upgraded from Windows 7 to Windows 10. Not sure it was necessary, but it must do it anyway.

    Then reinstalled AdobeAIR, ensuring well run Setup in administrator mode.

    Then re-installed Creative Cloud desktop application, again doing some fashion Admin CC app asks user name and password, and goes to the application install a window immediately.

    Properly installed Photoshop.

    Properly installed Lightroom.

    Launch of the Photoshop and Lightroom.

    Seven log files are created:

    12/03/2016-15:32 14 457 adobe Active Export 2 (64-bit) 2.4 12 - 03-2016.log
    12/03/2016-16:05 33 642 adobe Lightroom 6.0 03-12 - 2016.log
    12/03/2016-16:08 13 706 adobe Lightroom 6.4 03-12 - 2016.log
    12/03/2016-15:29 174 575 adobe Photoshop CC 2015 16.0 03-12 - 2016.log
    12/03/2016-15:34 Photoshop adobe 55 948 CC 2015 16.1.2 03-12 - 2016.log
    12/03/2016-15:36 Overview of 14 232 adobe CC 1.1.3 03-12 - 2016.log
    12/03/2016-15:37 25 083 Photoshop Camera Raw 8 9.4 03-12 - 2016.log

    I hope that these steps are not really necessary for all users, or it will take once again on each update, but I was getting desperate.

  • Firefox install fails with WIN ME

    I tried to install Firefox 3.5 and 8 on a Win ME - both system fail with "Setup causes an error in the Setup program. Firefox 2 was OK. Firefox messages suggest an update is necessary, but I can not because the installation program does not work.
    I also can not provide FEEDBACK - because it suggests, I need "Last version" which I can't install "simply" as it says on the feedback page. It's a probplem with ME - like the other browsers like IE and Chrome latest versions do not appear to it either... am I stuck with older versions?

    You can try KernelEx for versions of Firefox 3 + to work, but they might be very slow with an old PC less 750 Mhz and RAM.

    http://sourceforge.NET/projects/kernelex/

  • CP1525nw: new router: cp1525nw wifi install fails with the vague error message

    Product: HP Laserjet Pro cp1525nw

    OS: WIndows 8.1

    Hardware: Computer Asus laptop

    Recently received new router from Verizon (FIOS), model FQG1100 BHR4 router

    Purchase printer in 2012.

    Printer has worked with the old router; It will not communicate with the new router.

    For four days I deleted the printer from the laptop several times and tried to reinstall using the wifi. Installation instructions say to run the CD, select wifi, connect the USB cable when prompted, configure, remove the cable when prompted.

    When I attach the USB cable, Setup starts, but it expires ("taking too long") or fails with the vague message about not finding the product. I'm never invited to an SSID.

    I tried a USB installation and it worked; If the USB cable is good.

    Share print files & Windows is activated.

    I tried to re - adjust the printer by default and insured menu wifi said 'ON' for the wifi.

    I run a wireless network test report:

    SWITCH for wireless, wireless and security.

    Failure of network name (SSID found).

    DO NOT RUN for: printer settings consistent with the settings of the wireless router, no filtering, connected, the signal strength, other networks detected.

    Wireless netwrorks detected: 9

    I note the router label does not say "SSID", but said "ESSID".

    I have ideas for what to try.

    Please post here or send message to [personal information deleted]

    Last night I finally got to work.  I removed the printer entirely from the PC and rebooted. I turned off the printer. I ran a cable to the router (cable modem). I have reset the router, which then assigned an IP address to the printer. I changed the security settings on the router to use WEP instead of WPA. I ran the HP printer, Setup - and he finally presented me with the screen to "provide the SSID.  The program is run properly. I printed a test page. I changed the router security to WPA2. I printed a test page.     I tried to restart it and reprinted.  I also tried to remove the cable and then print again - printing failed.

    In short, I needed to do two things: connect a cable and change the router temporarily WEP for installation.

    In my case, my printer is close enough to the router with the cable.  A bit disappointing that the true wireless will not work, but I can print wireless from my laptop.

    I saw how many people have had the same problem, I had, and how much of HP is of any help to solve this problem.  I am convinced that the printer has a defect.  I hope that my posts will be useful to a few people having the same problem.

  • How to install .jad with Desktop file manager

    Hello

    Can someone tell me how can I install .jad with Desktop Manager file? I have a file .jad and .jar with me but I want to install it in peripheral strom by using the Desktop Manager. Please suggest me the steps.

    Thank you

    TEJ

    You could have found this link for yourself.

    For example, if you search for this card by using the key words "jar" and "cod", you will find that the first post from the list actually references the zany article reported you to.  In addition, if you had searched the KB with the keyword 'pot', you will find the same article on the first page.  If you are looking for the forum and KB yourself you will obtain the result faster and like me and wacky people have more time to answer real questions.

    So you look for yourself next time?  Please, I beg you.

  • New Windows 10 install fails with error 0xC0000005

    I'm trying to install 10 Windows on a new iMac internal end 2015 5 K 27 "screen with a Fustion disc.

    I downloaded the file 10 ISO of Windows 64 bit. Then I started Bootcamp and pointed to the iso standard.

    Bootcamp created the partition, BOOTCAMP and the OSXRESERVED one where installation files live I think.

    He started the Windows Installer, which confirmed the U.S. ENGLISH install, partition BOOTCAMP to be formatted in NTFS and accepted the product key. As soon as he started copying the files, however, it immediately stop with error 0XC000005, which seems to be an error reading on the media.

    Don't know what to do to work around the problem.

    Can you post the MD5sum/SHA1 of the ISO W10? What is the size of the ISO file?

  • I reformatted, and every update, I am trying to install fails with the error code 80070057.

    Check already for the tool or something else, and the option is not there on the update screen. Chess began with update (kb2541763) and since then, almost every update has failed.

    I've already installed one of the programs Microsoft fix that does not fix it.

    Hi BrianD_938,

    Follow the troubleshooting steps in this thread provided by Martin. Other users found useful steps to solve the problem with the error 80070057.

  • Grid infrastructure 11.2.0.3 install fails with public &amp; private subnet

    Specify Network Interface usage

    Name of the interface: eth0 subnet: 192.168.1.0 Public
    Name of the interface: eth1 subnet: 192.168.1.0 private

    By using advanced-> Installation
    No GNS->

    I'm getting an error [ins-41113] specified public and private interfaces are configured on the same subnet: 192.168.1.0 why it is a mistake because the Oracle e17212/typinst.htm Documentation says the following:

    A unique name of Acess customer (SCAN) for the group, including the following features:
    * Three IP; but I want to use only two static IP address, because I don't use DNS I use the file/etc/hosts.
    * On the same subnet as all other public IP addresses, VIP, and SCAN processes.

    Please advise because I was able to install the 11.2.0.2 grid Infrastructure using the same configuration with no problems. Now that I'm using Oracle 11.2.0.3 I encounter this problem.

    Levi,

    Thank you.

    I changed the subnet on each CCR node so that the public and the private sector have their own path to the distinctive network offering significant performance improvements.
    Node 1 eth0 192.168.1.12
    Node 1 eth1 192.168.2.13

    Node 2 eth0 192.168.1.14
    Node 2 eth1 192.168.1.15

    And then silence grid Infrastructure 11.2.0.3 successfully installed.

    Once again thank you very much!

  • kb2416471 install fails with 80070BC9 on Windows 7 Starter Edition.

    Hello.

    I have serious problems with the installation of .NET Framework 3.5.1 security update on my Asus Eee PC 901 running Windows 7 Starter edition.

    Whenever I try to install it, I get error 80070BC9. I tried to repair Windows Update, but it does not help.

    In some forums on the Internet, it is suggested to turn off .NET Framework 3.5.1 in Windows 7, but it is not possible to do this on Windows 7 Starter, given that this option is available in the Windows features.

    It's even more annoying because Windows will continue to try to install this update several times, every time I start the computer.

    Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Help!  Try to restore VM converter images - fails with missing file error catalog

    I used the VM to make BU converter images - VMserver 1 x VM Infrastructure - I did this so that I would be able to restore the images if I had problems with deletion of snapshots. I deleted snapshots and of course the servers do not start now. So I thought that I could restore the image converter server and I get this error.

    Any help will be appreciated,

    Maxi...

    If you have the virtual machine files, then you should be able to use these files as a source, then select ESXi as a target.  Did you try?

    -KjB

    VMware vExpert

Maybe you are looking for

  • official #iOS10 garni background

    After the iOS10 I see that some of the official background images have been trimmed of iOS...

  • Satellite M40 resume Hibernate when the lid is opened

    My M40 RESUME from hibernation/sleep as soon as I open the cover, currently in the standby power button action is set to Hibernate and cover is set to do nothing do I put into hibernation and close the lid when I open windows back it doesn't wait for

  • RAID on Qosmio x 500-02 M

    Hello I hope for the response from Toshiba (if they read this). I was wondering why this model has more raid. My Qosmio (G30) last had raid which I found extremely useful. But this model does not work even if it equipped with two HARD drives. I think

  • Instalar el visual studio 6.0 en window 2010 64-bit.

    anteriormente trabajaba con pc e el window xp y el visual studio 6.0, ahora instale el window 2010 64-bit y el visual studio 2010, cuando intento trabajar con los trabajos pair in el anterior window 6.0 visual said sell me a message that exists incom

  • issue between Vista OS and Norton Internet Security 2010

    I recently installed Norton internet Security 2010 I have Vista Home premium 32-bit with SP2 for Vista The installation of the program Norton Internet Security 2010 went well. It seems to work However, I note that Norton Internet Security indiacted a