Automatic, log in via the wireless network bridge

Similar Questions

• I can't connect to the Internet via the wireless network. It shows that I have local access only. I can't connect even in SafeMode with network.

  I can't connect to the Internet via the wireless network. It shows that I have local access only. I can't connect even in SafeMode with network.  I have Ping www.microsoft.com and the answer is "ping request could not find host www.microsoft.com.  I am connected to the network wireless through my iPad and can connect via my smartphone. This leads me to believe there is only something configured properly on my laptop. Can anyone provide assistance?

  Hello

  You can try a system restore...

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  .. .choose time, until this problem (you may tick to show more older restore points).

  Tricky

• V40 HP on office xp and is shared via the wireless network. laptop with windows 7 will not be printed on v40.

  Cannot print from laptop (windows 7) via the wireless router desktop (windows xp) with attached usb HP v40 .for all-in-one.

  (7) - wireless laptop router - desktop (xp) - usb - HPv40

  Has worked for laptop is running xp.

  Laptop of the coils of print job at the office and apparently complete, but the bureau simply ignores the print job.

  No error message.

  printing from office very well.

  I reported this as resolved. I submitted this problem. The problem started when the update of my laptop computer from Windows XP to Windows 7. When I did, the Lexmark printer to my desktop worked find with the new system of the laptop. The HP V40 has failed. The Office has just received each print job submitted from the laptop (via a local wireless network) and scrapped it. I could see the print job come in the V40 print queue and could disappear.

  Here's what I did to solve the problem:

  I tried a dozen or so combinations of withdrawal and installing the printer on my Windows 7 laptop and my Office Windowx XP (with the V40 attached via USB) and manually removing and installation of printer drivers on my desktop PC, it works finally. What have I done? I have no idea, but I think that deleting manually pilots v40 on the office was part of the solution. While view printers available on my XP desktop computer, I clicked on file and one of the tabs has led me to a place where I could remove the drivers for each printer (I just removed them for the V40).

  Here's what I DIDN'T DO:

  I'm not following the advice of the HP support person I contacted by phone. This Board had to reinstall Windows XP on my desktop. That clearly was not the problem when I talked to him. But he would NOT listen to reason. Luckily I have enough knowledge to know PC than its low of false tips

  I am pleased with the resultant availability of the V40 again.

  I have no idea how to officially close this problem.

  I would be happy to discuss with someone else who has a similar problem, but when I submitted this problem with my name and email address, the moderator has deleted my presentation of the problem. Therefore, I think that all those who want to know more is out of luck.

• Great printer Officejet 7500 a Format to connect intermittently to the computer via the wireless network

  I have a portable printer Officejet 7500 has recently purchased that I would use wireless.  I have an Apple wireless router and am running Windows 7 on my computer.  The printer and computers individually connect to the network, and there is no problem with the router.  The problem is with the connection between the computer and the printer.  I can print things from my computer by sending a file to the printer, but sometimes it works through printing directly from the software.  I tried to scan my computer and the printer, but get the same error at the same time that there is no communication between the printer and the computer.  I suspect that it is a firewall problem, but do not know how to change the settings to allow this communication to occur.  I have the windows firewall and advanced software protective system, but have disabled the windows shield in this software.  Help?

  First of all, download and run this utility:http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&jumpid=ex_r4155/hho/ipg/ccdoc/printer_diag/&lang=en&softwareitem=oj-106151-2

  What did he say?

  Just to be clear, that the 7500 a is connected to the Airport via radio, correct (not USB)?

  If so, we will define an external static IP and DNS address for the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). Yours is 10.0.1.2 a.200.  We use 10.0.1.220 for your printer.
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.
  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS. It's Google DNS. You can choose a different external DNS if you wish.
  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

• Impossible to connect a computer to the wireless network, I would like to first of all the automatic configuration service and I need advice.

  Article 861122 start WZC

  Unable to connect a computer to the network wirelee I firstly the WZC serviceand I need advice. TX

  Hello

  • Are you referring to Wireless Zero Configuration (WZC) Service?
  • What happens when you start the automatic Wireless Configuration Service?
  • You receive an error message?
   
  If you experience problems with the wireless network, reconfigure the Automatic Configuration Wireless for all wireless profiles automatically, click the fix this toolfrom the link below.
  Click run in the file download dialog box, and then follow the steps in this wizard.
  Error message when you try to run the Network Setup Wizard update for Windows XP Service Pack 2, Service Pack 3, or Windows XP Tablet PC 2005 Edition wireless
   
  See also:
  In Windows network connection issues
  http://support.Microsoft.com/kb/313242

• How can I disable 'O2 connection manager' to automatically connect to the wireless network?

  Original title: I have a program installed in my computer 'O2 connection manager' it automatically connects to the wireless network, I need to disable the connection

  I have a program installed in my computer 'O2 connection manager' it automatically connects to the wireless network, I need to disable the connection to the network.

  Hi John,

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  If you do not O2 connection manager, you can disable it to connect to the Internet or you can uninstall the program and check the issue.

  You can follow the steps in the link below.

  Uninstall or change a program:
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  I would say O2 you back for more information in the links below:

  http://www.O2.co.UK/business/support

  http://community.o2online.IE/

  I hope that the information above helps you.

• My PC is connected to the wireless network, but it is impossible to open any internet page. I went through the diagnosis of Internet Explorer, see below.

  Diagnosis of last run time: 28/01/12 10:16:32 Gateway diagnosis

  Entry door

  Info the following proxy configuration is used by IE: automatically detect settings: enabled Automatic Configuration Script: Proxy Server: Proxy bypass list:

  info could not get the proxy settings via the Proxy Automatic Configuration mechanism

  Info this computer has the following (s) default gateway: 0.0.0.0

  warn that there is no default gateway entry

  repair automatic action: reset the network connection

  action to disable the network card

  activation of the card network action

  successfully activated information network adapter

  Info this computer has the following (s) default gateway: 0.0.0.0

  warn that there is no default gateway entry

  user redirection of information in support of the appeal

  IP layer diagnostic

  Corrupted IP routing table

  prevent the default route is missing or not valid

  Invalid entries in the ARP cache

  action cache ARP has been emptied

  Diagnosis of IP Configuration

  Invalid IP address

  detected info valid IP address: 192.168.0.1

  Wireless diagnosis

  Wireless - Service disabled

  Wireless - user SSID

  required user input action: specify the name of the network or the SSID

  Wireless - first installation

  Info the name of the wireless network (SSID) to which the user wants to connect is IrinaLaptop-router.

  Wireless - Radio

  detected info valid IP address: 192.168.0.1

  Wireless - off limits

  Wireless - hardware problem

  Wireless - Novice user

  Wireless - network Ad - hoc

  Wireless - less preferred

  Wireless - 802. 1 active x

  Wireless - Configuration mismatch

  Wireless - low SNR

  WinSock diagnostic

  WinSock status

  info all base service provider entries are present in the Winsock Catalog.

  channels of information the Winsock Service provider are valid.

  Info entry provider MSAFD Tcpip [TCP/IP] passed the loopback communication test.

  Info entry provider MSAFD Tcpip [UDP/IP] passed the loopback communication test.

  Info entry RSVP UDP Service Provider provider passed the loopback communication test.

  Info entry RSVP TCP Service Provider provider passed the loopback communication test.

  Info connectivity is valid for all Winsock service providers.

  Diagnosis of network adapter

  Network location detection

  Info to help home Internet connection

  Identification of network adapter

  Info network connection: name = connection to the LAN, device = Broadcom 440 x 10/100 Integrated Controller, MediaType = LAN, type = LAN

  Info network connection: name = wireless network connection, Device = Intel (R) PRO/Wireless 3945ABG Network Connection, MediaType = LAN, type = Wireless

  Info network connection: name = 1394 connection, device = 1394 Net Adapter, MediaType = LAN, type = 1394

  Info network connection: name = connection high speed, device = Miniport WAN (PPPOE), MediaType = PPPOE, type = NONE

  Info network connection: name = blank, peripheral = Miniport WAN (PPPOE), MediaType = PPPOE, type = NONE

  Info both Ethernet connections and wireless available, ask the user for selection

  required user input action: select network connection

  Info Wireless connection selected

  State of the network adapter

  Info network connection status: connected

  HTTP, HTTPS, FTP Diagnostic

  HTTP, HTTPS, FTP connectivity

  warn HTTP: error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved

  warn HTTP: error 12007 connecting to www.hotmail.com: the server name or address cannot be resolved

  WARN HTTPS: error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved

  WARN HTTPS: error 12007 connecting to www.passport.net: the server name or address cannot be resolved

  WARN FTP (passive): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved

  WARN FTP (active): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved

  error could not make an HTTP connection.

  error could not make an HTTPS connection.

  error could not make an FTP connection.

  I did not want to do this (restore point). However, I found a solution. It comes: http://forums.techguy.org/networking/1029348-network-connection-status-media-disconnected.html

  Where there are two crucial steps (do not know if the two were needed) RUN command (1) netsh int ip reset reset.log and (2) netsh winsock reset catalog
  
  
  After a restart, hey presto my wireless connection was repaired. This seems useful, but not essential (shows wireless performance but not the solution): http://wpc.475a.edgecastcdn.net/0047...etup.1.2.0.exe which is run Xirrus Wi-Fi Inspector 
  Thanks for your time!
  Good bye

• Impossible to manually add the wireless network

  I need to manually add a wireless network to the laptop. When I click on add in the wireless connection properties window, however there is no pop-up window. If I try on a similar laptop windows wireless network properties appears. The Wireless Auto-Configuration service is started. How can I get the wireless network properties window?

  I was finally able to solve this problem and I posted the results on another forum, I used for this purpose.  Here is the text exactly as I posted on the other forum.  It answers some of your questions.
  Regarding other software that manages the wireless card, Yes, there are (Atheros), he was not managing the adapter (off a long time ago), however, to be sure, I removed it to run in the registry.

  Here is the text of how I solved the problem, I mentioned.  If you have more questions, feel free to post them.

  *****

  I am just posting this here because I could solve the problem and not able to find a reliable source on the internet on a fix for this and for a problem that is the result of my attempts to fix it.

  This is the situation and my landline.

  I was getting this error message

  "Impossible to migrate dependent packages.

  After trying to install a pacakage KB. It did not matter that one but they have been associated with the Wireless settings.

  I continued to try to install the newer packages.
  KB893357
  KB917021
  KB918997

  Each gave me the same message

  "Impossible to migrate dependent packages.

  I read online that I install KB937143 (update IE7) could help.

  I did this and still got the same message on dependent modules.
  I also had another problem occur.
  In the section my network places properties connection wireless adapters, whenever I clicked the Add button / PROPERTIES without window appears to allow me to change the settings, however, I was able to remove items from the preferred networks window.

  My Automatic Configuration Service wireless is running and took Windows to configure my wireless settings.

  I downloaded the updates for my driver Wlan (WiFiHP 500) and I still had the same problems.

  I restarted KB918997 using the/log option and read the log file. This is the last important lines:

  33.849: MigrateHotfix: hotfix migration KB937143
  34.129: migrating QFE KB937143 with command line: update.exe z q - B: sp2qfe
  36.783: failed 1603 Update.exe.
  36.793: MigrateHotfixes: KB937143 Migration failed
  36.793: DoInstallation: Migration failed
  36.933: failed to migrate dependent packages.
  39.597: message displayed to the user: cannot migrate dependent packages.

  I then uninstalled the KB937143 package and reinstalled KB918997 update with the newspaper of Pétion and he went along. I also tested the buttons add and PROPERTIES in the window of Favorites and those networks worked too.

  I checked the logfile KB918997 and he showed this:
  42.311: MigrateHotfix: hotfix migration KB932168 have
  42.511: migrating QFE KB932168 have with the command line: update.exe z q - B: sp2qfe
  88.768: MigrateHotfix: Hotfix KB932168 successfully migrated
  88.768: MigrateHotfixes: return code: 3010
  88.928: DoInstallation: Migration succeeded

  As a side note, I restarted the laptop frequently just to be sure.

  So, really, the option of running with the Ko log file helped me diagnose the problem.

• Impossible to connect to the wireless network when the wireless Internet is filled to connect to the Local network

  I tried to fill the connection between my laptop Wi - Fi and an ethernet cable LAN via the connection to the Local network for my xbox 360. However, when the connections passed the wireless connection would show that it is disconnected and would not reconnect. When I tried to repeat the process sometimes the same thing happens sometimes it says that it is still connected.

  However, be that as it may, both times I could not load any page of the website from my laptop and xbox connect any.
  How can I create a network bridge and get the wireless internet to connect please?

  Any help to fix this would be appreciated,
  P

  This Microsoft Knowledge Base article might help: bridge may not work with a Non-Promiscuous Mode network card .

  If not, I recommend to delete the network bridge and enable sharing of Internet connection on the wireless network connection. Boulder computer Maven
  Most Microsoft Valuable Professional

• 'Unable to Find' OJ Pro 8600 Premium on the wireless network

  Network: Router NetGear 3400, WEP 64-bit + computer Dell laptop + Officejet Pro 8600 Premium N911n, HPC782FE.  Vista 32 - bit OS.  New printer installation, wireless connection to the wireless internet router.  Test results of the wireless network said successful wireless wireless wireless printer installation works, connected, SSID found, the printer settings compatible with the configuration of the wireless router.  Network status says HP Network Configuration page is ready, Active connection Type is wireless, 802.11 Wireless status is connected.

  I can send HPeprint to the computer through the router, and it comes back through the router to the printer when it prints.  But I can't print directly from the computer to the printer, even if the two seem to be connected to the network via the same router.  I'm puzzled.

  When I press the icon on the screen of the printer wireless, it says connected, IP: 192.168.1.105 (I put manually after having read several problem Q & as), with the correct network name and MAC, with a strong signal.  When I click on "I can see that the status is logged on and the intensity of the signal" and then enter the IP 192.168.1.105 and then click Next, the search for a printer "Can't find printer" product and I'm back where I started.  When I jump to the next page and finally get to the HP Print and Scan of doctor, he is unable to identify or fix the problem.

  Hi Allen73,

  There seems to be some problems with the configuration of the network configuration. Please call our technical support to the 800-474-6836 if you're ok with it, they can log on to your computer and take a look to see what settings need to be corrected. If you do not live in the United States / Canada region please click the link below to get help from your region number.

  http://www.HP.com/cgi-bin/hpsupport/index.pl

• PC cannot connect to the wireless network

  Windows Vista and office computer HP.  The use of the Airport Extreme.

  All other computers in the House can connect to the wireless network.

  The Vista machine declined the connection Wireless intermittently for the past two weeks.  Tonight, he lost it completely.  When I click on "connect to network" in the network control panel - I see the wireless network.  But when I click on connect, I get a message that Windows cannot connect to this network.

  I changed the password on the Airport Extreme and rebooted, it.  Wireless usb on Windows machine the device works correctly, by checking through the properties box.

  For example, Vista machine is recognizing the wireless network, but does not connect. Why not?

  I'm ready to throw the computer out the window!

  Hello

  Check the PoodlesAway solution to the same issue here:

  http://social.answers.Microsoft.com/forums/fi-fi/vistanetworking/thread/d4fa044e-8C41-4D8D-a4b1-82ee9ff556ac

  ======================================

  Apple Airport may be your main problem - did you check its firmware?

  Read these
  http://osxdaily.com/2009/09/01/how-i-fixed-my-dropping-wireless-airport-connection-problem-in-Snow-Leopard/

  http://reviews.CNET.com/8301-13727_7-10331876-263.html

  ======================================

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• C309g-m - unable to connect to the wireless network, touchpad hangs

  Hello.

  As PrintDoc has suggested, it's a new thread in the suite here, where I jumped in with a diversion to the station 23.  I'm sorry.

  Here are the details:

  (1) system:

  Router is Thomson TG585n provided by ISP O2/Telefonica.  Download high speed ADSL to ~ 9Mbps.

  3 devices connected and stable:

  -L' computer running XPSP3, connects to the router via homeplug (Ethernet on electrical wiring).

  -Laptop running Vista Home Premium, connects wirelessly with WPA2-AES.

  -Mobile phone runs Symbian 60, connect wirelessly in the same way.

  Router is configured to operate on channel 11 g wireless and accept new devices automatically with the appropriate security password.

  It is a House of 3 floors - router on the top floor has always worked. computer bureau on a middle floor with printer; laptop and the phone can be anywhere.

  So far so good.

  Now, I want to add the wireless printer and I'm really bad.

  (2) summary of symptoms:

  I bought the C309g-m on Amazon UK in January 2010.  USB connection with assistant easily.  Migrated to wireless via the front panel.  Easy. Then tried to add a 500 GB Freecom Network Drive (NAS device connected to the router) and has failed, because I didn't RTFM.  After removing the FND, I get an error message of HP to the effect that I have "tried to set the printer's IP address" and lost the connection to the printer wireless.  Have not seen this message since then, so I can't reproduce.

  As I said, I removed the FND, who never appeared on the network in any way.  However I still can't connect to the printer wirelessly.  The wireless connection wizard crashes after asking to specify a password.  The wireless network Test report that the radio works, but shows FAIL the entrance of 'No filter '.  I looked into the console of the router and there is nowhere to set the MAC address filtering, so I'm stumped.

  I tried to 'Add a device' CD, for network via USB settings.  It takes forever (30 minutes?) to come up with the same error "MAC address filtering.

  One last thing: if I leave radio turned on (the default lighting) will lock the touchpad after a few minutes to the home screen.  If I disable it, it's fine.  Once locked, the only way to stop is to unplug the power supply.

  Finally - all the base printer functions very well.  I can print and scan through the USB port and can take copies.

  Thoughts:

  (a) I think my router settings can be screwed.  I don't see a way to set limits to the DHCP pool, I should be able to.  However, since I was 3 devices that connect to the Internet I am reluctant to do a factory reset in case I lose those!

  (b) there's something wrong with the printer - but I don't know what.

  c) I could try temporarily move the printer to the i) door ii) within reach of hardwirable of CAT5 and wireless range

  (d) the fact that I can connect the printer (wireless) or DNF (cable) makes me suspect the router.  However, I have not received any support from O2: they said it was an internal problem of LAN/WLAN and nothing to do with broadband, therefore, were not willing to help.

  I spent hours on this and get nowhere.  Help, please!

  Tim.

  BTW - I'm in the United Kingdom.

  Well, I think that there are many more problems with 'atypical' routers and HP software as there are with HP printers.  I see not nearly as many problems with certified brand routers WiFi (like Linksys, Netgear and D-Link), as I do with large brands and Belkin.

  The worst offenders are rented modems/routers that your ISP provides.  For some reason, they have a lot of industrial property settings and firmware that simply don't play well with HP printers (may be others, but I would never buy another printer HP - I know way to much about printers after their design for 25 years).

  A reliable and good solution cheap is to go buy a $40 or $50 Linksys router and replace stuff not expensive you have (or paste according to your router/modem rented).   Time and time again, I've seen problems disappear just after installing a standard router.

  You can reserve an IP address for a wired connection, but because parts wired and wireless to the printer have separate MAC addresses, this IP address is not available for the wired connection.

  Read the thread if you wish.  Discover the solutions on this website if you want to, but I still think you have a defective printer.

• Satellite Pro A200 cannot connect to the wireless network

  Hello

  I have a Satellite Pro A200 and Tuesday night I was able to connect to a wireless network. I received an update, rebooted and now it doesn t seem to work.

  I can see the wireless networks available via the Toshiba Radar but cannot connect to my usual wireless network.
  Also, the wireless network icon disappeared from my system tray and if I go to Control Panel/network connections, I can't even view available networks because there is no option to do so.

  Any ideas?
  the FN/F8 will work?
  Help! Please, I beg you!

  Have you tried using System Restore and restore the operating system on time earlier?
  Maybe this will remove the update installed, and you can again use the WLAN.

  Check it out.

• HP Laserjet 200 M276 Color MFP: HP Laserjer 200 color than MFP M276 found on the wireless network

  Printer is connected to the wireless network, but cannot be seen by the computers on this network.

  The printer has been installed on my home network for 6 months and works well.  Now it is found on the network.  Power cycle the printer, and he started to work for one night.

  The day after the printer is found on the network by PC, running Windows or Mac 8.1 on the network (under Leopard through Yosemite.

  Reset printer settings by default, in the wireless network data and verified that it is on the network (wireless diagnostics confirm the network name, config, port and switch Diagnostics).  Still cannot be found on the wireless network.  I know that it is on the network, because it can access internet functions.

  Repeated configuration via USB for settings wireless program.  Receive error message indicating the wireless settings have been communicated successfully to the printer, but the printer is not found on the wireless network.

  Not cool.  Looks like I have yet another broken HP printer.  I don't know the process.  I called the warranty and they are sending me a refurb printer.

  Returned to the HP after 10 years.  Looks like it was a mistake.

  Hello

  Try restarting your router by unpluggin power for a while, let him 3 minutes to start and restart the printer.

  Click the icon on the printer wireless - what is the listed IP address?

  Can happen that the intellectual property of the Explorer of your computer?

  You can see any difference after the reboot of the router?

• Satellite Pro U400 (XP pro) cannot connect to the wireless network

  I got a U400 straight out of the box. I installed XP pro through the disc of recovery without any problem, except that I am not able to connect to the Wi-Fi here. (Other devices connect very well so the problem is at the end of the laptop) I tried to update via windows update (SP3) via a wired LAN connection but still the same problem. Other posts here have any suggestions for downloading new drivers from realtek. All of the solutions presented do not work for me. Anything else I can try?

  I am able to see all the wireless networks that are available in the range and may try to connect (provide the WPA password) but after watching the "preparation to connect" screen for a while he seems to abandon without reporting any error

  Hi guys

  First check if you are using the latest version of the BIOS.
  Second, clear all options of the router WLan security (filtering by MAC address, Firewall, encryption of WLan, etc.) and try to establish the WiFi connection.

  If you're going to succeed the problem is certainly related to the encryption settings
  Step by step, activate the settings and set up the router again.

  Good luck