Satellite P20 - formatting drive HARD and the installation of Windows XP Sp2

Similar Questions

• E521 with advanced format ST500DM002 Player - do I need a SATA driver separated during the installation of Windows 7?

  Hello

  I have an E521 with 2 GB of Ram and X 2 processor. I want to install Windows 7 on a record nine of ST500DM002 (= native 4K advanced format). It will work without hassle, or will I have to install a SATA driver during installation? If Yes, which? I can't find the necessary information for the main card.

  Thank you, Andre

  Hi Andre,

  As you would expect, you will need the Windows 7 drivers RAID so that the installer of Windows recognize the drive. Our buddy rdunnill forum explains how to do this HERE. He included a link to NVIDIA support site where you can download the driver.

• BlueScreen on Satellite L300D - 13 H so that the installation of Windows XP

  Hey everybody!

  First: I have a laptop Satellite L300D - 13H.

  I wan't to downgrade my laptop Vista SP1 for Windows XP SP3.
  After the Installation of XP loads the driver for the hardware and wants to start the installation, an error message is:

  * A problem has been dedected and windows has been shut down downto prevent damage. *
  * for your computer

  * If this is the first time you've seen this Stop error screen, *.
  * Restart your computer. If this screen appears again, follow *.
  * the following steps: *.

  * Check for viruses on your computer. Remove any newly installed *.
  * hard drives or hard drive controllers. Check your hard drive *.
  * to ensure that it is correctly configured and terminated.*
  * Run CHKDSK /F to check corruption from hard drive and then *.
  * Restart your computer *.

  * Technical information: *.

  * STOP: 0X0000007B (0XF78D2524, 0XC0000034, 0X00000000, 0X00000000) *.

  WHY? I hope someone can help me!

  Oxford

  You have problems in Windows Vista, or you have only this problem to the installation of Windows XP?

  Load the driver SATA when you try to install Windows XP? I think you need SATA driver for install Windows XP.
  You can download it at Toshiba: http://eu.computers.toshiba-europe.com-online support => Toshiba download drivers

  I read the error and I think that it might be a problem with your HARD drive.

• Satellite A300 - HARD and the Installation of the OS disk replacement

  Hello world

  I watched a few videos online regarding how can I do to replace the two HARD drive in my laptop Toshiba Satellite A300 PSAG4E-04901CEN. However, I have a few inquires before that I undertake this task:

  (1) are there any recommendation to which HARD drive should I buy for this laptop. I want something affordable with speed and relatively good ability.
  (2) how I would go about installing Windows 7 OS on the new HARD drive. I have to update my BIOS and drivers when I finished installing?
  (3) are there other guides (written or video) that you would recommend that I go through before making the replacement?

  I appreciate any help on this matter.

  A few days ago a friend of mine asked me to help. HARD on its A300 disc was defective. We bought the new 250GB SATA HDD, succeeded him, and after that, I installed Win7 32 bit.
  Now the machine works perfectly.

  Do not do anything as the BIOS update. Just put the new HARD drive and launch the installation of Win7. All the necessary drivers, tools and utilities, you can find and download from the Toshiba download page - http://www.toshiba.eu/innovation/download_drivers_bios.jsp

  Here's how I installed all the stuff on A300 friends:
  -Win7
  -chipset driver
  -Storage Manager
  -display driver
  -driver sound
  -modem driver
  -utility supervisor
  -infrared
  -patches
  -configfree
  -VAP
  Hardware - toshiba
  Control - HDMI
  -WLAN driver

  Everything works well but lacks some drivers

  Added Vista tips:
  Toshiba - help - working properly
  -Card reader - installed correctly
  -Webcam driver for A500 - tested with Skype - works correctly.
  Driver - Synaptics

  Win7 works well and I am very satisfied.

  If you need help more made me know.

• Satellite A200-1NH-AHCI/SATA300/ChipSet and the Installation of Windows 7

  Hi all

  I have a Toshiba A200-1NH.
  Model: PSAE3E-03K01DDU.

  Because the hard drive has failed I replaced it with a new one.
  Model: WD3200BPVT.
  It is the ATA/300 and 320 GB.

  My goal is to install Windows 7. I started with the disks of origin comes with the laptop to install Vista and intended to upgrade Vista to Windows 7 later.

  Start with the original installation disc leads me to the first boot of Windows and then the system says "Windows cannot configure your computer's hardware. She's.

  I did some research and discovered that she could have something to do with the Chipset drivers.
  It is not possible to add drivers during the installation by using the original recovery disk. That's why I tried an install of Windows 7 and adding the AHCI ICH8M drivers during installation.

  Windows 7 installation cannot use the drive, any driver chipset I have add during installation, it does not change a thing.

  To revert to the original installation disc provided with the laptop, formatted the disk, absolute 0 partitions on it, restarted with disk, create partitions, copy of the data from windows and once again, the message:
  "Windows cannot configure the hardware in your computer.

  I have not tried to update the BIOS, did not and manual for it that does not use Windows Update the BIOS.
  I have not tried another disc. I connect this drive on my Mac and ran diagnostics, that's fine.
  I have not tried all the AHCI drivers, I found, there are hundeds, it is unclear which I should use.

  You guys give me advice?

  [EDIT]
  New version of BIOS found, cannot use it.
  To install Windows, I need to update the BIOS, to update the BIOS... I need Windows.

  Post edited by: Thijxx

  > Windows 7 installation cannot use the drive, any driver chipset I have add during installation, it does not change a thing.

  To my knowledge, Windows 7 already contains the SATA/AHCI driver that's why it should not be necessary to add the SATA driver during the installation of Win 7. Had driver for Win XP or Vista installation only.

  This is why I would recommend checking another HARD drive and boot from the original disc of Microsoft Win 7.

  By the way: the European Toshiba driver page provides the Intel Storage Manager (this package contains the SATA drivers) just to Win XP and Vista so my assumption should be correct that Win 7 doesn't have the SATA driver to recognize the HARD drive during the installation procedure.

• Tablet WON'T start from any USB drive to the UEFI format unless it has the installer of Windows 8!

  Hello! I've done many tutorials online, which none have worked. Here's my question:

  I am trying to install Windows 7 on my shelf (I have on an another USB drivers). However, I plug it into the dock the Tablet and turn it on and go into the BIOS, and that's where. But when I try to boot from it, the screen flashes and it goes back to the boot in the BIOS. With the help of Rufus, I tried all combinations (TPG for UEFI, MBR computers for UEFI computers, etc.) and none of them work! To test if the USB was defective, I loaded an iso image 8.1 install 64-bit Windows on the drive, and to my surprise, it started from the drive and started the Setup program! I can't start the Windows 7 installation. I tested the stick in my laptop UEFI and it starts very well! What I am doing wrong? Will this work? probably not, but I am bit agitated-e-f (see below)

  1 start from a Windows 8.1 Installation USB key, but by replacing all other files on the disk with the Windows 7 installation version so it force install Windows 7 instead of 8

  System Specs:

  Intel Atom Z3735F @ 1.33 GHZ (Turbo boost up to 1.83 GHz)

  2 GB RAM DDR3

  EEMC Samsung 32 GB Flash storage module

  BIOS: Version 2.16.1242 Aptio Setup utility

  Interesting thing is that in the BIOS, it is said that to enable secure boot (did not you or off), CSM must be disabled. I guess it is, but I can't find where to turn them back on. Site Web de American Megatrend will not let you submit a support ticket, unless you are in a company :|

  Thank you!

  Hello

  I can certainly understand your concern. As it is a problem with the BIOS of the computer, and the preceding troubleshooting steps provided by the Support engineer do not work, I suggest you contact the manufacturer.

  For more information, do not hesitate to contact us. We will be more than happy to help you.

• Satellite L300-190, (PSLB8E) and the installation of Windows XP Home edition

  Can I Satellite PSLB8E use this BIOS and configure XP Pro without doing anything else?

  Set controller SATA compatibility mode, and then use Setup / Cd XP Pro?

  It should work. Put in compatibility mode and try to install Windows XP Home edition, but use the Windows XP CD edition SP2 family facilities.
  It is very important.

• Satellite A300-1QD - two questions during the installation of windows XP or Vista

  Nice day
  Here's my problem:

  1. I just bought the Toshiba Satellite A300-1QD and since there is Vista based on it and I have Vista ultimate, I decided to install on the laptop.
  After I formatted deleated everything and I have the partition that I created a new.
  After that I installed Vista, now I'm at the point where it says complete installation and the blow bar is at about 2/3.
  My problem now is that it's now been 3 hours and nothing happens the dots next to the 'installation complete' is still occurring and disappearing.

  2 as the number one lasted so long I decided to install windows XP Professional, but when it loads after that I put the cd one has bluscreen place called chkdsk.

  What should I do now to get something on what works?

  Hello. I think that the partition table and boot loader are messed up and it's your problem. You can try to chek to find errors and format your HARD disk with a third parity tool and try to install windows again.

• I want to transfer my windows 7 Desktop to my macbook, but I lost the product key and the installation of windows 7 ultimate on my desktop

  I want to transfer my windows 7 ultimate in my former office in my macbook, but I lost the product key and when my office had been repaired, the installation of my windows 7 ultimate is already replaced with windows 7 Professional. So now I have that drive. What can I do so that I can install my windows 7 ultimate on my macbook through bootcamp?

  Try asking a surrogate key then. If you have problems, try contacting Microsoft Support;

  Information: Microsoft general site: http://support.microsoft.com/contactus#tab0

  1-800-642-7676 (1-800-MICROSOFT)

• Satellite Pro 6100 very slow during the installation of Windows XP Home edition

  Hello

  We have installede Windows XP from our CD orig., XP is running very slowly and the mouse freezing of minute-to-minute. We can install Windows 2000 and it works perfectly. Try a new HD with the same problem, it has 512 MB of ram.

  Hello

  As far as I know this device is supported for Windows 2000 Professional and Windows XP Professional. Is there a similar situation when you use the original recovery Toshiba WXP Pro media?

  In fact, do you have a?

  By the way: I hope you're talking about the new installation without specific or additional preinstalled software you need!

• Satellite P850 - 31 M - invalid key, the installation of Windows Server 2012

  Hello

  I don't know about or write about me, that it moves if necessary.
  So here's my problem.

  I just bought a laptop with the windows installation 8, but I want to install Windows Server 2012.
  I boot on my dvd, everything's fine, and then I click on install and then he told me that the key was invalid.
  But I do not enter a key.

  When I reinstall windows 8 I give no key and it did not in the property and after he told me that windows is activated.

  I don't understand the key or it will scan?
  I have how little he turns to me key?

  Thanks in advance

  Sorry, but I m confused.

  If you have purchased the license Windows Server 2012, then you have also a serial key.
  You must use this key for activation.

  Victory 8 regarding:
  I guess Win 8 was preinstalled.
  In this case, you will need to create a recovery disk before you install another system?
  You don't have any disk Win 8 because there was a possibility to create a recovery disk and the recovery disk contains a 8 win which is enabled.

• I have two Toshiba laptops, and both died after the installation of Windows Vista SP2

  I have two Toshiba laptops, and both died after the installation of the Windows Vista SP2 (home edition).
  Now, it does not... even not start BIOS... Try to boot from the CD, no luck. When WVista SP2 installed and restarted, after a while, he came to the flashing message: 0xC0190036 1183/62494...

  I can't help that if it does not start even. I don't have a CD WVista. Both laptop came pre-installed. In addition, no rescue CD.

  Any help will be appreciated. I really need help.
  Thank you.

  Well, try this:

  1. If the power is off.
  2. Start the laptop and keep press F8
  3. then select restore.

  And? :)

• Gateway 7330gz does not start after the installation of Windows XP SP2

  Gateway 7330gz had a hard drive failure, so installed new hard drive (160 GB drive), file a copy of XP Pro, starts without a problem, pulled down to XP SP2, saved on hard drive, run SP2, and it installs without warning and restarts.

  Then goes into loop.  Download the gateway splash screen, The Win XP logo comes up and the progress bar is on 2-3 loops - gateway splash screen, repeat... If I F8 for boot menu selections, I can do a safeboot with networking.

  I reformatted and reinstalled XP added once again, all the appropriate drivers I can find to remove yellow? in the Manager list of device without change.

  There are only XP Pro on the machine when I start - absolutely no other software package has been installed, no external devices are connected.

  My plan was to drop XP Pro, SP2, and SP3, (updated IE along the way) and add MS Security Essentials. Then pick up all the other patches since SP3 before you add any other software.

  Thoughts on why the boot failure after installation of SP2?

  Solution found

  In BIOS advanced together to the top was an option called INTEL speed step

  Disabled the option and restarted in SP2 with no problems.

  Adding SP3, MS Security Essentials with no other problems...

• Get the 80070026 error during the installation of Windows Vista SP2

  Everyway that I try to run my automatic updates for windows I get the error message with the error Code 80070026.  I have Vista service Pack 1.  I do not know there is an update for me who keeps my computer at risk or with this problem.

  I've also disabled my anti-virus (3rd party firewall) and tried to install the update. I get the same error.

  Advice or assistance on the issue would be greatly appreciated.

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  «Assistance free unlimited installation and compatibility is available for Windows Vista, but only for Service Pack 2 (SP2).» This support for SP2 is valid until February 26, 2010. »

  Use the link above for Vista SP2 support.

  And for other Windows Update issues:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack update Vista Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• "Not enough space" error windows install during the installation of Windows vista SP2 software

  Original title - cannot install Windows Installer 3.1 on Windows Vista Home Edition

  I use windows vista home with service pack 2 installed. I have a custom made software. Before installing this software, I need to install 4 i.e. cystal reports, dotnet, report viewer and Windows Installer 3. I was able to install the first 3, but the windows installer fails, it is said to be "saturated". I also tried MSI 4.5 but of no use. My software runs well on Windows XP. The interesting thing is that I return this software a year and I installed it on vista and it worked fine. Now I have re-installed windows vista on my computer and had updated. Now this problem. Could there be a reason why some update to windows vista, I installed now wasn't there last year that causes the problem. Can anyone help.

  Hi tbilal22

  
  Windows Installer 4.5 comes pre-installed with Windows Vista and Windows Vista SP1. Please refer to the article for more information-

  http://support.Microsoft.com/kb/942288

   

  It is possible that the old software, it is not compatible to be used with Windows Vista SP2. I suggest you try software installation by using the Windows Vista or XP on Windows Vists SP2 compatibility mode and check if you are able to solve the problem.

  Compatibility mode is used if a program written for an earlier version of Windows does not work properly. Then, you can use the program compatibility Wizard to change the compatibility of the program settings. To manually change the settings of a program, use the individual program's compatibility tab

  You can check the link for assistance on compatibility mode - mentioned below

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

   

  I hope this helps.