Automatic maintenance starts automatically

Similar Questions

• Windows 8 blocks when starts the automatic Maintenance

  I have a DELL Inspiron desktop computer with windows 8. When I leave the computer for a little automatic maintenance start and programs and then crash and nothing starts. CTRL-ALT-DEL will not bring anything. A few pop - ups can work for the taskbar a bit, until even those who refuse to work. Side bars may appear when the mouse enters in a corner, if not too much time has passed, but then will stick and be non-responsive as the rest of the system. I have to turn off and restart the computer to get windows in market order manually.

  I have read and tried the 3 steps listed here, but no problem was found. I suspect a corrupted file or update somewhere in the system, but do not know what files to look at.

  Unfortunately, I don't have the windows disc 8 on-site.

  Thanks, just thank you. I agree, I want to know why we don't know EXACTLY what made this program stupid and why we cannot turn off completely / permanently if we so choose.

  In any case, I had this problem but it seemed to have worked himself so I consider this closed. My apologies.

• laptop freezes when performing automatic maintenance

  My sony vaio SVE15137CGW (Windows 8) started to freeze when the automatic Maintenance starts (after staying idle for a few minutes). A black clock appears on the task bar, so I know that the service is running. I can market to stop the gel which is a real nuisance.

  What could cause this problem and how can I solve this problem? How can I disable the automatic maintenance until I solved the problem? I followed the instructions on the Web page below, but the interview turned on even once after a reboot:

  Hello

  Automatic maintenance facilitates efficiency slowed and allows the activity to execute in a timely and prioritized way. So, the event that is configured to run will begin when the previously described (defined by default at 02:00 every day).

  the default configuration from the active automatic maintenance should do no harm at all. However, personal computers are not always lit, and nor are they heavily loaded by processes or data. Therefore, it is recommended to disable the automatic maintenance in personal computers to avoid the processing overhead.

  After the automatic maintenance turned off, you can manually optimize your PC by manually initializing the command CHKDSK of disk defragmentation, etc..

  You can check the link to find out how to disable the automatic Maintenance using Task Scheduler tasks:

  Refer to the suggestion which is marked as an answer:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-performance/Windows-81-freezes-when-automatic-maintenance/fece2a5a-855C-4430-9521-a7ec666d61ff

  If you do not find the same performance after you disable the automatic Maintenance, reactivate tasks.

  Check out the link for more details:

  http://msdn.Microsoft.com/en-us/library/Windows/desktop/jj835985 (v = vs. 85) .aspx

  Please let us know if the problem still persists.

• Pavilion 15 p143cl ENERGYSTAR: laptop is not fully Hibernate, sleep and shutdown.

  Since I did something with my drivers, things are haywire. Here is a list of a few things I had problems with: sometimes when I use a voice such as Skype or discord application, sounds on my desk are picked up through my microphone even if I use a helmet, automatic my computer maintenance starts the most random times and it never seems to end and every time I have stop Hibernate, or put my computer to sleep, my screen turns off, but my fan, psychic power, and mouse to lighting are always on. the fan works as well, but it's at a speed slower and quieter. All my drivers are up to date, and therefore my BIOS. My guess is that the BIOS update may have caused things to go haywire in my computer. Can someone please help me solve this problem? I have to use to press the power button to do my computer turn off or go to sleep.

  Hello

  Not necessarily - I just noticed your reply.

  First, run some diagnostics as follows.

  Stop of the laptop.

  Tap away at the esc you key start Notepad to open the Start Menu.  Select the Menu of diagnosis ( f2 ) and run the tests on the hard drive and memory.

  If there are error codes generated, post back with details - if everything goes, try the 2 suugestions below.

  1. on some machines, the pilot for 11 series IMEI has been known to cause that kind of question of the judgment, so it may be worth trying an earlier version.

  You can use the following method to install an earlier version of the driver IMEI.

  Download driver IMEI on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66228.exe

  Once done, open your downloads folder and run the installer - it warns you that it is an earlier version, but simply continue.

  When finished, restart the laptop.

  2 it can also be a value to uninstall the current driver for Intel Smart technology, restart, then try the version directly from Intel on the link below.

  https://Downloadcenter.Intel.com/download/23109/Intel-Smart-Connect-Technologyailing

  If none of the above suggestions work and if you don't know exactly what changes you made which led to this question, you may want to perform a factory reset and see if that will solve the problem - a guide on the main methods for this are on the link below.

  http://support.HP.com/us-en/document/c03489643

  Kind regards

  DP - K

• When I try to "Optimize the readers", I get "Value is not available" on a SSD

  I am running Windows 8 Pro. I can't optimize my SSD. I read online that I should be able to click on "Optimize" and who would send my SSD TRIM data in order to improve its performance. But currently "Analyze" and "Optimize" buttons are grayed out for my solid state drive. The current state also show "optimization is not available.

  Thanks for any help.

  Same thing here.

  Went to Windows "Optimizing disks", click on optimizing, but he said "Value is not available" and then the button "Optimize" changed in gray.

  When I manually ran the automatic Maintenance (Control Panel > Action Center > maintenance > start maintenance), I noticed a lot of reading and writing for the SSD during the maintenance process.  So I opened 'Optimize the readers' and he has done exactly as she was running the Disk Defragmenter (despite it, grateful that he was a Solid State Drive).  I looked in the resource monitor to see what that wrote for the SSD and I don't remember the exact name of the process, but it was something with defrag in the name.  I had already done Windows Experience Index before that, then Windows knew that an SSD has been installed and it showed as such under 'média Type', so I don't know why it was running a disk defragmentation.

  I just ran the automatic Maintenance again, but this time it doesn't seem to be running defrag as it did the first time I ran it.  But, it continues to display "Value is not available" to optimize disks.

  Then, when he says "Value is not available", which means exactly?  DisableDeleteNotify showing 0 (indicating the PAD is on), but is windows sends always TRIM wants the SSD or not?

• How to make multiple sources of DB option?

  My import RPD same table of many Oracle DBs and unions, which allows me to create a summary report.  The problem is when a DB is out of service for maintenance, the report fails because a DB is inaccessible.  How can I do all of the optional DBs, so the report will continue to operate as long as some of them are available?

  Hello

  Honestly I don't remember I have a way to make an optional physical source: when a LTS are pointing to it and your LTS is used to provide data for analysis (as you did) it must be there or you have the error (your current situation).

  The RPD, you can manually disable an LTS, but I'm not aware of a way to do it dynamically or make the option you are looking for...

  

  Maybe he can be a solution for DB maintenance is supposed to be annexed and communicated as soon as possible, in order to modify the RPD to disable give a LTS when maintenance start and enable it when above. (I can also imagine "exotic" solutions to dynamically update the RPD on the fly by the script, but what do you really want?)

  Another option through my head (didn't try, just a theory): set up a rule of fragmentation and try to use it to avoid hitting a given LTS when you it is down, but it will probably be very difficult to manage and control with a huge risk of missing an LTS, even if the DB is in place.

  Just a point about the business logic: you said you use the union of several table to create a summary report. So when a DB is down for maintenance your report is not a view consolidated, it is a partial consolidated view. In this case, I personally prefer to have an error rather than see the numbers that are false, as some sources are missing (but nothing on the screen tell you that...)

• Disable alerts on an object such as a host?

  Does anyone know how to disable alerts for an object in vrops 6.x? I have a host that has a few hardware problems and I would like to stop the flood of emails until fixed.

  complex vrops is Yes.

  Ron

  Not tried salvation, but also interested.

  I was wondering if you go to Admin > overview environment > filter for the host, and then select Maintenance start or stop collection - I hope that it would be a way to do this?

  John

• Error 500 - Internal server error

  Hello
  
  I get an error below
  Error 500 - Internal server error
  RFC 2068 Hypertext Transfer Protocol--HTTP / 1.1:
  10.5.1 500 internal Server Error
  The server encountered an unexpected condition which prevented him from meeting the demand.
  
  Thank you

  Yes, if bi_Server (s) and you Weblogic server are rising and running then this error 500 will show successfully until you you start Oracle BI Services.

  This often occurs when you are using MS WIndows start > programs > Oracle BI > option Start Services bi because once he completes the initial start of the OPMN to maintenance starts the default browser in an attempt to open your Instance of Oracle BI. However, as the OPMN (components OBI) are always looking up this page is usually a few seconds/minutes premature. So either wait a few seconds/minutes and hit refresh on the browser, so OBI from 11g using this option or make sure your components are started via EM or opmnctl status.

  See you soon,.
  Christian

• Wireless zero configuration does not start automatically. I need to run it whenever I restart the computer

  Wireless zero configuration does not start automatically.i have to start whenever I restart the computer. I have a laptop dell inspiron

  Moved from feedback

  Original title: WiFi

  Hello

  1. what version of Windows is installed on the computer?

  2. is it works much earlier?

  3 have there been recent changes made on the computer before the show?

  To activate the Configuration service automatic wireless so it starts automatically, click the Start button. Select settings , then select Control Panel.

  If you use Windows XP display, select the performance and Maintenance category, and then select Administrative Tools.

  If you use Classic view, and then select Administrative Tools. In the left pane, click the Services icon. Click the automatic Wireless Configuration icon in the right pane, and change the box Startup Type to Automatic.

  This parameter will be defined the service starts automatically at boot time. Then click on the Start button to start the Wireless Auto Configuration service zero wireless and click on the OK button.

  The automatic Wireless Configuration can also be started and stopped from a command prompt.

  To start the automatic Wireless Configuration, run the following command:

  net start wzcsvc

  To stop the automatic Wireless Configuration, run the following command:

  net stop wzcsvc

  For more information, see the link.

  Wireless Zero Configuration Reference

  Please post back with the results and we will be happy to help you further.

• When I start my computer and the connection to my office the Documents folder opens automatically.

  I use a Dell PC and running Vista.   Recently (in the last two weeks) whenever I start the computer, log on to my office, the first thing that loads immediately is the My Documents folder.   I checked the items in my Start Up programs, but I don't know what I'm looking for.

  Thanks for any help.

  Hi JeffWinbush,

  Method 1:

  (a) go to control panel > appearance and personalization > Folder Options

  (b) select the view tab, uncheck the restore windows files when connecting

  Method 2: Run the fixit available in the links below and check if that makes a difference-Worth to try

  Diagnose and repair Windows files and folders problems automatically
  Difficulty of broken desktop shortcuts and common system maintenance tasks

  Note: FixIt would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.

  If the problem persists, this could be an activity of the virus

  Method 3: Run Microsoft Security scanner (MSS) to any threat and try to correct

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: Infected files can be deleted from your computer; There is a chance of data loss.

• How do I know what programs and services should automatically go to start

  Original title: System configuration

  How can I find out what programs and services should automatically run at startup please help im running almost everything

  Hello

  You can use these to control which startup programs. Many others who settle start-up are not
  really need to be there. As Acrobat Reader (Adobe), Agent of WinAmp and many others who
  load chunks of themselves to start more quickly (not a problem on the machines of today ' hui) and to make sure that they
  can control the files they support (to be sure that you continue to use only). Those who are not common
  examples and not meant as a slam on fine programs.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929135

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  -------------------------------------------------------------------------

  Performance and maintenance tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Automatic maintenance is delayed

  Hi, thank you for taking the time to read my question.

  I have two questions, we're three doubts and the other, a problem.

  1. Home Group
     As far as I know, groups can be used to connect to computers in the same House (or perhaps proximity). This feature requires LAN? Can I connect to other computers a bit or away from me? He doesn't are not all computers in my house, but still to try, I started in the center of the Action. Now, it seems changed in some places and also appears in the libraries? Based on responses to previous questions and my statement, is there a need/how to return it return NULL?
  2. Stuck in the automatic Maintenance
     My action Center seems always shows me the message to run the automatic maintenance. I already did and I don't know why he continues to show me even. As soon as the maintenance is completed, it shows me the message again in the center of the action. How can I solve this?

  Thanking you before any aid.

  Hey riri,.

  Thanks for the reply.

  I would like to inform you that the problem be resolved itself before I tried your solutions provided in the last post. I didn't write in the original post, but it happened once before. Be it resolved, at this time, but this time, it took more time. I would like to know the reason why this is happening.

  Thank you.

• Automatic maintenance keep coming or pop frequently

  First of all Hello. I have a laptop Windows 8 and I'm sick of the question popping up automatic maintenance keep. When I click it, it disappears for a while and then it comes back again. How can I solve this problem please help.

  Hello

  Configuration\systeme control and Security\Action Center

  Run the troubleshooter

  If the problem persists:

  Start the computer in safe mode and check if the problem persists by following the link below.

  How to easily enter the mode without failure in windows 8? (One-click series)

  http://support.Microsoft.com/kb/2809468

  If the problem does not persists in Mode safe mode, and then perform a clean boot.

  You need to perform a clean boot to prevent any third party conflicting application from interfering with your computer.

  To put the computer in a clean boot state, you must follow the steps in the article mentioned below and check with the question.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8:
  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to start your computer in normal mode by following these steps.

  a. t Starscreen, type in msconfigand press enter.

  b. on the general tab, type or click the Normal startup option.

  c. press or click on the Services tab and uncheck hide all Microsoft services, and then press or click enable all.

  d. press or click on the Startup tab, and then press or click Open the Task Manager.

  e. in the Task Manager, select all your startup programs and then press or click OK.

  f. When you are prompted to restart the computer, tap or click restart.

• Automatic maintenance is always delayed

  I have Windows 8 and everything was smooth until a few days or weeks. Now, Action Center is always displayed the error message: "The automatic Maintenance has been delayed" and he tells me to run either run manually or it will be executed automatically. The thing is, it does not automatically more, it is set to run at 20:00 every day and is not... and when I run it manually, it starts and continues for a while but then it suddenly stops. I've read other threads with the same question and answers, but nothing has worked. Also, I noticed that if I turn off the monitor and it goes back, what happens if you press a key or move the mouse, but I don't touch the computer at all.

  Hello

  Thanks for the reply.

  Run the automatic Maintenance and check if the problem persists or not.

  Automatic maintenance will be made according to the performance and energy efficiency. Complete system for high power resources are used to complete the maintenance activity as quickly as possible.

  Check out the link for more information.

  Automatic maintenance
  http://msdn.Microsoft.com/en-us/library/Windows/desktop/hh848037 (v = vs. 85) .aspx

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Windows 8 ~ always delayed automatic Maintenance, in the center of the Action message does not disappear.

  Hello

  Having a problem with the automatic Maintenance since I got back from vacation 10 days in Greece.

  Essentially Action Center tells me to run maintenance to optimize my computer, I run it and then about 15 minutes later, he stops and the message reappears just say I need to perform maintenance. The only things that take any CPU in the interview is the Service Host: System and Disk Defragmenter. Also the date of execution is timed correctly.

  I tried the system restore to a date before I went on vacation (when it worked perfectly fine) and then perform maintenance, but it's the same thing. Although he said this time my anti virus is obsolete, I guess it's only due to the good restoration. He was disabled during the part of the interview and then turned back on.

  I went into task scheduler and it says the following next to regular maintenance: "the operator or administrator has refused the request. (0x800710E0).

  I frankly don't know what to do now, I can simply hide the message but who don't get rid of the issue. I don't understand how it could very well be June 21, but may not be good when I come back on 1 July, I tried for 2 days to solve this problem, but nothing works right now.

  I'm still trying now, but any help would be appreciated, it's really bugging me.

  Thanks for reading.

  Would like to point out that it is now FIXED!

  I've updated to 8.1 Windows today and Action Center maintenance works perfectly now, in fact all of the computer runs faster than ever. So I think it was some compatibility issues with some updates for Windows 8.1 or something.

  So yes, if anyone has this problem on Windows 8, certainly thinking about upgrading. I'll report back if it starts again, but for now, fortunately corrected.

  Thank you all for the help!