automatic removal of the data after DROP TABLESPACE files

Similar Questions

• don't print from firefox, file is automatically removed from the queue

  I try to print from the web browser firefox or a pdf document and files will not be not print and are removed from the queue after about 30 seconds. I tried the browser google chrome and they print well from there. This problem just started today.

  Make sure that you do not print in a file selected and the correct printer is selected. You can see these settings in the "native print dialog" window when you do {Ctrl + P}.

• If I remove all the data from the Web site it will also remove all my passwords?

  If I remove all the data from the Web site it will also remove all my passwords?

  It will not erase your saved in the Keychain passwords, but you need to connect back to all Web sites (like this one) that require you to log in.

• ' DNS probe Finsished no Internet ' on the data after 5.1.1 update

  I liked having my Sony Xperia Z3 Compact until recently after the 5.1.1 update... Since I've updated my phone, he had problems connecting to the internet using data.  Wifi works fine, but when executing the data after a few minutes I get the error 'DNS probe finished no Internet.

  I contacted Sony and I tried all the suggestions of the Sony Agent (reset the phone, button next to the sim card and restart full and updated through the computer using PC Companion).

  I've seen people with this problem on any other Forums Android, but I thought I'd try here... Everyone knows about this problem?  And even better a solution? (without sending to my phone to Sony, because it takes weeks... and I want to not "find something wrong")

  Just found this on another post on the forum and I think it relates to my problem so I try it:

  Reddit FishStik5 user: go to the APN settings and replace the AFN iPv4 Protocol only (it was before iPv6) seems to fix the problem.

  How do I find the setting: parameters-> wireless and network / more->-> T-mobile data, mobile networks-> APN-> APN Protocol-> set for IPv4.

  This seems to solve the problem for me.

• Access to the data after the managed service VOImpl in bean method call

  I use JDeveloper 11.1.2.4.

  I created a method to Interface customer and he calls you a managed bean.

  The method is exposed in the control of data and I have a links to it through links on the page.

  The method runs just a view of criteria for a row of data in the database.

  But, because the method does not have a return value, how could access the View object data.

  Here's the Service method and the method of the bean management;

  The service method: in PersonVOImpl.java - should result in 1 row:

  public void getPersonByCnViewCriteria (String cn)

  {

  ViewCriteria viewCriteria = this.getViewCriteria ("PersonVOCriteriaByCn");

  Reset a display criteria of values that may was resolved at design time

  viewCriteria.resetCriteria ();

  this.setCnBind (cn);

  this.applyViewCriteria (viewCriteria);

  this.executeQuery ();

  }

  Method in managed Bean: I have a linking operation method to access the Service method.

  
  

  It seems that the Service method is executed successfully.  But, how to access the data after the call?
  

  
  

  protected void getPersonByCn (String cn)

  {

  BindingContainer bindingContainer = this.getBindings ();

  OperationBinding operationBinding = bindingContainer.getOperationBinding("getPersonByCn");

  Map operationsParamsMap = operationBinding.getParamsMap ();

  operationsParamsMap.put (WorkFlowBean.PROPERTY_CN, NC);

  Object result = operationBinding.execute ();

  If (! operationBinding.getErrors () .isEmpty ())

  {

  }

  
  

      // How to access data after the call?
  

  }

  You should never use a class VOImpl or VORowImpl in a managed bean. If you have to use them, create Interfaces and use.

  I'm not too sure if it's good to return a view in a method object.

• How can I display the time of the data stored in a file using labview?

  How can I display the time of the data stored in a file using labview?

  Hi Matt,

  I think that we will need a little more information as to how you capture the data, what data you capture, etc.

  If you capture a waveform, is to extract the time data waveform which includes the t0 and dt values, so you can understand the time stamp of a specific data point as in the image below.

• Load the data from a text file into a table using pl/sql

  Hi Experts,
  
  I want to load the data from a text file (sample1.txt) to a table using pl/sql
  
  I used the pl/sql code below
  
  ***********************************
  declare
  f utl_file.file_type;
  s varchar2 (200);
  c number: = 0;
  Start
  f: = utl_file.fopen('TRY','sample1.txt','R');
  loop
  UTL_FILE.get_line (f, s);
  insert into sampletable (a, b, c) values (s, s, s);
  c: = c + 1;
  end loop;
  exception
  When NO_DATA_FOUND then
  UTL_FILE.fclose (f);
  dbms_output.put_line('No. deles de lignes insérées: ' || c);
  end;
  
  ***************************************
  
  and my sample1.txt file looks like
  
  ***************************************
  1
  2
  3
  ***************************************
  
  Gets the data inserted, with way below
  
  Select * from sampletable;
  
  A, B AND C
  
  1-1-1
  2-2-2
  3 3 3
  
  I want that data to get inserted as
  
  A, B AND C
  
  1 2 3
  
  The text file I have is to have three lines, and the first value of each line should go to each column
  
  Help, please...
  
  Thank you

  declare
  f utl_file.file_type;
  s1 varchar2(200);
  s2 varchar2(200);
  s3 varchar2(200);
  c number := 0;
  begin
  f := utl_file.fopen('TRY','sample1.txt','R');
  utl_file.get_line(f,s1);
  utl_file.get_line(f,s2);
  utl_file.get_line(f,s3);
  insert into sampletable (a,b,c) values (s1,s2,s3);
  c := c + 1;
  utl_file.fclose(f);
  exception
  when NO_DATA_FOUND then
  if utl_file.is_open(f) then utl_file.fclose(f); ens if;
  dbms_output.put_line('No. of rows inserted : ' || c);
  end;
  

  SY.

• Recovery of a virtual computer from the data after removing inventory store

  Hello

  I am new to VMware, so I apologize if this is a stupid question.

  I am running ESXi 3.5.0 and to manage the server using Vsphere Client 4.0. I tried to move a virtual machine from a to another data store, and by playing, I decided to try 'remove inventory' on the virtual machine, I was trying to move. Given the files of all the VM are still in the data store, I thought that it should not be difficult to re - add to the inventory. However, I can't figure out how to do this. Any help would be appreciated.

  In the second part of the question, why past a VM to a local data store on the server to another local data store on the same server seem to be so difficult as well? I think that I finally understand how using the VMware Vcenter Converter Standalone to clone the virtual machine for the 2nd data store, and then I guess I'll remove the original after the clone is done? This is the right way to do it, or there at - it an easier way?

  It seems to me all these things are basic operations that should be fairly straightforward to achieve, because it is expected to just move the files from one disk to another, but they are revealed to be a real pain in the butt. Am I missing something?

  Thanks in advance!

  1. In the Client, select your ESX Server host computer.

  2. Click the summary tab.

  3. Look for the icon of the data store, inside the resources box.

  4. Right-click on the data store, and then select Browse the data store.

  5. Browse the directory for your virtual machine structure.

  6. When you find the folder where your VMis, locate the file with a .vmx extension.

  7. Right click on this file and select Add to the inventory.

  Rick Blythe

  Social media specialist

  VMware Inc.

  http://Twitter.com/vmwarecares

  http://Twitter.com/vmwarekb

• Automatically set to the Date and time does not

  Date and time settings on my iPad Air set them automatically does not work? When I turn it out it will allow me to choose a city (Knoxville).

  When I turn it on with (location settings) it just turns and turns?

  Any ideas?

  Hello and welcome to Apple Support communities,

  This problem may be caused by a number of things, most often the cause is the device not being able to contact the time server. Here are the instructions from Apple supported for this problem, as well as a link to the appropriate article.

  Follow these steps, after each step:

  1. Make sure you have the latest version of iOS.
  2. Automatically turn on set in settings > general > Date & time. This will automatically put your date and time based on your time zone.
  3. Make sure that your time zone is set correctly. Tap Settings > general > Date & time > time zone.

  If you still have any questions affecting your date, time, or time zone, you can automatically disable in the settings > general > Date & time and manually set the time and time zone. Or contact your carrier.

  The option to enable the value automatically may not be available in all countries or all shells.

  If the time on your iOS device does not go after a sync with your computer, the computer may be time wrong. Check the time on your computer in system preferences > Date & time. You can select "Set date and time automatically."

  Support the Article HT203483

  Get help with the date and time on your iPhone, iPad and iPod touch - Apple Support

  Of course, if the time of your carrier server cannot connect the other option is to manually set the date and time until the carrier server are again available.

  Hope you helps out.

  Kind regards

  Peter.

• Hand removed, but the data is always in (almost all the) space

  I deleted a file on a share and after the folder deleted presented themselves as snapshot data, still too much space and I was unable to free up space.

  This led me to delete the entire part with the intention of again sharing and re - copy all the data.

  But now I removed the sharing, but all the data is still in place on my volume. As this was the only part of volume with all data in the volume should have 100% space availeble.

  On the contrary, it says 700 GB free of a volume of 5 to 14, (5x4TB).

  How can I fix?
  Current firmware is 6.5.0.

  [img] http://i.imgur.com/kqkIf3C.png [/ img]

  I have a RN31400 (4x4TB) and an EDA500 expansion unit (5x4TB). The volume of the EDA500 does contain no useful data, but the volume on the RN31400 don't.

  Always rub, it may take some time. Only at 0.52% up to now

  I'm a little reluctant to update the firmware, done this twice so far and both times the nas froze on me during the restart.

  But why is it impossible to format or destroy volume? This isn't normal behavior I think. The only thing I can do is to pass a x-raid and flexraid (him did not)

  OK update: I've stopped washing. Go to flexraid that make it possible for me to destroy the volume.

  Switched back to x-raid and now it is to resynchronize, then moving forward:

  

• Automatically seized of the data entered by the user in a database?

  Hello

  I do an application in which the user enters an item of data as information, but I need to be added directly in the tables in the application database. Is it possible to do? If so, how? The program would automatically put the data in the table and use SQL statements to add, modify, etc., so that the user would not have to do something with it? I'm just a beginner in programming, I would really appreciate the answers to be simpler than usual.

  Thank you

  Daniel

  Hi DanielJWE06,

  Click on the links.

  http://docs.BlackBerry.com/en/developers/deliverables/8682/SQLite_overview_701956_11.jsp

  and also, this will help you.

  http://docs.BlackBerry.com/en/developers/deliverables/17952/Storing_data_in_SQLite_databases_1219769...

  First try to search for your problem in the forum after that create a thread.

  There are so many threads available in the forums for Sqlite. Then use the Support forums search feature...
  Any way Gud luck!
  --------------------------------------------------------------------
  Please mark as resolved messages if you found a solution.
  Feel free to press the Bravo thank the user who has helped you

• Cannot display the data after refresh

  Original title: pat

  How to get back my office files after a refresh

  Hi Patricia,

  Thanks for posting your query in Microsoft Community.

  Let me ask you;

  1. Do you mean to say PC Refresh?
  2. How do you Refresh?

  When you perform the refresh, the applications that you install from Web sites and DVD is removed. The applications provided with your PC and applications that you have installed in the Windows store must be reinstalled. Windows puts a list of apps removed on your desktop after you refresh your PC.

  If you Refresh PC without affecting your files, data (office files) must be in the same place they were before the refresh. However, if you are unable to view them, it could be a possibility to be hidden.

  Open the file Explorer (for example: window of Documents)

  Click file , and then check the option hidden objects

  Check if you are able to view your office files

  If you are unable to view your files, please come back with answers to the questions, we will be happy to help you further.

• FDM 11.1.2.2 EFFECTS in the data after loading data

  Hello

  I'm loading data for planning an application of FDM for 30/04/12 to 31/3/12 (April) FY13 but perform 30/04/13 to 31/03/13 (April) exercise 14 in planning and for the 13 year data are deleted automatically

  I use replace when exporting data option

  I guess that the FDM cannot remove data that are responsible for the planning application

  can someone help me solve this problem.

  Thank you

  Answer: The correct data is loaded to April 14 exercise

  Have you reviewed your Control Board for the periods? Maybe it's that you map Apr-2013 to APR-FY14

  Answer: Yes mapping for April 2013 is mapped to APR-FY14 > This is the reason why the data is loaded to FY14. You need to update your table of control periods.

  Then your data for FY13 are deleted in planning when using replace. When you load mode replace, FDM runs a clear script before loading data. Which erases all intersections for category (scenario), period and entity (all descendants of your target entity)

  Question why the 13 year data are deleted in the planning if we choose the option replace > by default the CLEAR of the LOAD ACTION script do not include the year dimension. This is why the data are deleted for all years. You must include in the script

• Automatically fill in the Date fields

  Can you have automatically fill fields date after you have entered a date? For example, if someone has put a date in a field "Date Week Ending ', could other date fields automatically fill in office on that date?

  ZeroZone

  Use a calendar for the first field widget.  Then use the text fields for each date, you need.

  If you wanted to tomorrow's date, enter the first field measurements: (formCalc)

  If (StartDate.rawValue == null) then
  $.rawValue = «»
  on the other
  Num2Date (Date2Num (StartDate.formattedValue, DateFmt (2)) + 1, DateFmt (2))
  endif

  If you want to 7 days of the date selected, change + 1 to + 7 and so on.

• Incompatible control file and the data after the backup files

  The company that I work has servers where some components are new more, so have a backup in the event of hardware failure. If we intend to do some clones of 1:1 of the current servers to change them in case of emergency. As most of the necessary data is not volatile and we reset stuff in any case, there is no need of replicaton, replace an old version of the database works very well. Now we could not easily get substitutes for our old material, so we had to set up new machines. And that's where my trouble starts, because now I had to actually set up the system and the database rather than do a simple copy of byte to byte. I'm mainly a programmer, using Oracle of 'other' side, but as our DBA is yet to come and the work must be done now...
  
  So I did some reasearch and decided to do a normal backup of the cold. I have dumped the controlfile, copied data and configuration files to the new server and read the prompt SQL (no mistake there) control file. After some initial hiccups with the system (memory, etc.), I was finally about to start the database, only to get an error ORA-01190 ("1 database or control file is from before the last RESETLOGS").
  
  I guess I did is a bad thing when you restart the database (used the wrong part of the control file) or when the copy of the data. The original data have split two readers for simplicity and logical, I copied their entire contents. So maybe I don't not copied to little but too?
  
  As I said in the introductory paragraph, I'm not a DBA, but I'm willing to learn and listen. I don't expect a complete solution, but some guidelines when to look and what to avoid. Any help on this would be appreciated.

  Currently, there are some points need clarification,

  1. you don't need to re-create the control file, if you have a clean shutdown database and copied all the files at the same time (data files, control files etc.)

  2. If you stop DB, copied files of data but do not copy the control at shutdown file, you must re-create the control file.

  3. the error ORA-19909 suggested you resetlog prior to recovery.

  ORA-19909: string data file belongs to an orphan incarnation
  Cause: The data file specified has been restored from a backup that was taken during a period of time that has already been abandoned by a resetlogs operation or Oracle cannot identify what incarnation of database file belongs. The alert log contains more information.
  Action: Restore a backup of this file that belongs to the current or a previous incarnation of the database. If you use RMAN to restore, RMAN automatically selects a good backup.

  4. it would be better that again follow you from scratch the article.

  for example,.

  Copy the files you did copy over the data base to the bottom of the old server,
  modify the control file creation script

  RECOVER DATABASE USING BACKUP CONTROLFILE;
  ALTER DATABASE OPEN RESETLOGS;