automatically load the different files.txt

Similar Questions

• blue screen after Ko 2840149, error - "STOP: c0000218 {Registry hive failure} the registry cannot load the hive (file): \systemroot\system32\config\SOFTWARE.

  After I installed security KB2840149 on a 2008 VM w/exchange server that is running on the machine of Hyper-v server 2008 I'm dead in the water w / E-mail down hard.  The virtual computer is in a reboot cycle bluescreening before I can get anywhere.  Tried the last well known - no effect.  Safe mode - so bluescreens.

  BlueScreen info:
  STOP: c0000218 {Registry hive failure}
  The registry cannot load the hive (file):
  \systemroot\system32\config\SOFTWARE
  or its log or alternation.
  It is damaged, missing, or not accessible in writing
  I saw that it was a patch of replacement for a patch that crashed a lot of PCs.  Since there is no history on this patch, I wanted to check in a see what is the best way to fix this on a virtual machine?

  Being not so deep on VM, I wasn't sure if there was a better way. But I just put the virtual machine to load 2008 iso and then made the standard repair for registry problems off the coast of the article below.

  Of http:

  If the Windows registry is slightly or moderately damaged, you may be able to restart the computer in safe mode and use system restore to restore the registry from the computer to the last known good configuration. However, if the Windows registry is seriously damaged, all types of logon will be prevented. Trying to connect to Windows causes the system fails, then restart. In this case, you will need to boot the system into the recovery instead of Windows Console. Once in the Recovery Console, you can use the Startup Repair tool. Startup Repair tool automates common diagnostic and repair of the installations of Windows tasks starts longer.

  (a) start your Windows Vista or Windows Server 2008 DVD
  (b) on the first Setup screen click Next
  (c) in the lower left corner of the screen, choose "repair your computer".
  (d) on the System Recovery Options screen, select your Windows installation and then click Next
  (e) click on "Command prompt".
  (f) go to X:\sources\recovery > startrep.exe
  (g) this will take some time but will look at any registry related issues.

• C0000218 {registry file failure} the regestry cannot load the hive (file)

  I have XP pro. on a Dell computer. Think that children may have picked up a few difficulties. When trying to boot into safe mode, I get "Stop: c0000218 {Registry file honor} the regestry cannot load the hive (file): \SystemRoot\System32\Config\Software or its log or replacing." It is damaged, missing, or not accessible in writing. »

  There is no disk that came with it, but I have anouther computer with the same windows. I tried to find a way to make a BOOT disk but cannot find a way. Is there a way to solve this problem with the windows disc?

  It's a pretty popular mistake these days and sometimes easy to get running, but you also want to figure out how it happened.  I always suspect Symantec/Norton products with this error, but we'll see.

  If you currently or have already had a whole isntalled Symantec/Norton products, what are the names and versions (if you know).

  Other variants are:

  STOP: c0000218 {Registry file failure}
  The registry cannot load the hive (file): \SystemRoot\System32\Config\SECURITY or its log or replacing. It is damaged, missing, or not accessible in writing.

  STOP: c0000218 {Registry file failure}
  The registry cannot load the hive (file): \SystemRoot\System32\Config\SOFTWARE or its log or replacing. It is damaged, missing, or not accessible in writing.

  STOP: c0000218 {Registry file failure}
  The registry cannot load the hive (file): \SystemRoot\System32\Config\SYSTEM or its log or replacing. It is damaged, missing, or not accessible in writing.

  I would start with a chkdsk/r since the recovery CD of Console you make (see below) and please answer a few questions...

  Maybe someday the dialog box 'ask a question' forums XP will ask these questions automatically when a new thread is started so I don't have to ask every time.  It might even be possible to solve a problem in a single response when enough information is provided.

  Please provide additional information on your system:

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  Fill in the blank: my system was working fine until this happened: _.

  If the system works, what do you think might have changed since the last time it did not work properly?

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

  Do, or do not. There is no test.

  I decided to implement the points for a new puppy instead of a pony!

• SE error message: "the registry cannot load the hive (file) \systemroot\system32\config\software"when try to start on the original copy of Windows XP. "

  Original title: you're smarter then me. Help, please

  My windows xP home edition has crashed on my HP Pavilion a620n. Initially, I was able to get by using the original cd of the publishing house. Then it crashed again. Rebooted and pressed F8 and typed in my administrator id. This time, a cam of the screen saying that it was an ID of invaled. Re-checkeded my Id and it was OK. Put in my cd original and installed on a different partition. Problem is that I forgot to do a dual boot. Now I have two sessions of windows xp on the same partition. Am able to switch between them, but really need the original. When I click on the origianl happens with the registry cannot load the hive (file) \systemroot\system32\config\software.

  Is it possible to fix this?

  Thanks, it was a great help

• Load the data from txt

  Hello
  
  I just export the data in my cube, he geneates two text because of this file is more than 2 GB in size, one is xxxxx.txt, another is xxxxx_1.txt.
  
  My question is that if I load the data file above in the same cube, I should just specify the first file xxxxx.txt? It seems that I can't specify both text files?
  
  Thank you

  you only need to load the second file
  Or
  clear data and load the two

  Your choice, you will get the same results.

• LoadFile() cannot load the local file?

  My program works OK in Director, also OK on the web, but can't work on local. It is said after post like Shockwave and HTML file when the Director runs the HTML code automatically, the DCR in HTML file works fail. I am looking for reason, find, this is because one sentence of the program:
  Member ("World"). LoadFile ("myModel.W3D", true, true)
  
  In Director, it works. myModel.W3D is 'file:///D:/MyDirectoty/myModel.W3D '. On the Web, that's OK too. At this time, myMode.W3D is actually "" http://www.myWebSite.com/MyProgramDirectory/myModel.W3D ". " But if I open the HTML published, the loadfile() cannot work. Why?
  
  It is because of security reasons, MacroMeadia let loadFile() cannot load the local file or there is a mistake in my program? How can I let my program works locally?
  

  Quote:
  Posted by: WrongAgain
  It is because of security reasons, MacroMeadia let loadFile() cannot load the local file or there is a mistake in my program? How can I let my program works locally?

  Bingo-test - this is a safety feature to prevent the shockwave files accessing your file system.
  You can disable this security feature by placing your project published in the folder called «DSWMedia» shockwave

  -Ben

• Load the text file into the Textarea

  Hi How can I load text files into Textarea I use this method seems like it load text file but I can't show it in a textarea a certain pls help

  Hi all
  Finally I found the way to load the text file into the textArea, that's like
  
  
  private function loadText (): void {}
  var l:URLLoader = new URLLoader (new URLRequest('2.txt'))
  l.addEventListener (Event.COMPLETE, finishLoading);

  }
  public void finishLoading(evt:Event):void {}
  var myData:String = new String (evt.target.data)
  txtBox.text = myData;
  }

  ]]>
  

  It should works because it is a work with me
  Take advantage of the code
  Sanji

• When you open a new window, it automatically loads the last content pop up (?) and I'm unable to type in the address bar or open a new tab in the new window.

  I don't know if they are technically pop-up windows (for example, if you perform a search on kayak.com, it will automatically open a new window of priceline.com with the search results), but that happens with Blocker on or off. Other examples are a little info to a financial site window or .edu, which opens a session is about to expire, or answer a FAQ (with the exception of the priceline example, these windows have an address bar or view a URL). In any case, once these windows are closed, if I try to open a new window, it will automatically load the content of this "pop-up". Whenever he does, I'm unable to type in the address bar or open a new tab in this window.

  How can I fix it? What I want is to open a new window which is empty, not load the previous contents.

  No, I just realized that I was holding Command-Shift-N rather than command-N

• Automatically loads the page with https

  Firefox will automatically load the following sites using https

  If I type in
  cgets.com

  It automatically goes to https://www.cgets.com

  If I type in
  Google.com

  It automatically goes to https://www.google.com

  Why is this and is at - it a way to stop if to do this?

  Current version of Firefox may prefer a secure connection if you have never used a secure https connection to visit the pages on a Web site.

  Try to set the Boolean browser.urlbar.autoFill false pref on the topic: config page.

  • http://KB.mozillazine.org/about:config

  See 'Prevent Firefox to automatically complete URLs':

  • https://support.Mozilla.org/KB/search-your-bookmarks-history-and-tabs-awesome-bar

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

• corrupted: WINDOWS\ SYSTEM32\ CONFIG\ SOFTWARE Stop: c0000218 {Registry file failure} the registry cannot load the hive (file): SystemRoo

  corrupt: WINDOWS- SYSTEM32- CONFIG- SOFTWARE Stop: c0000218 { file registry failure} the registry cannot load the hive (file): any on windows server 2003.  How can I fix this

  Hello, getin99

  For help on Windows Server, you need to create a new post on the TechNet forums at the following address: http://social.technet.microsoft.com/Forums/en-US/winservergen/threads

• The registry cannot load the hive (file): \systemroot\system32\conig\software or its log or replacing. It is damaged, missing, or not accessible in writing.

  My laptop does not start all of a sudden upward - it crosses the safe mode screen, acts as if it is loading windows (display the windows screen) then becomes to empty, followed by a very quick flash of the message on a blue screen: "the registry cannot load the hive (file): \systemroot\system32\config\software or its log or replacing."  It is damaged, missing, or not accessible in writing. "Then, he repeats the cycle.

  I looked towards the top of the error on the Microsoft Knowledge base, and the hotfix request using the recovery disk, I.  I wonder how I can get the interactive help on laptop computer file so that I can run so that it fixes the problem... (http://support.microsoft.com/kb/307545).

  Advice, that someone could give me so that I can at least get started again windows go down all the important data before reinstalling Windows would be much appreciated.

  Thank you

  Chris

  Hey Chris,

  Thank you for visiting the Windows Xp forum

  I was wondering if you run a retail or OEM of Windows version. If you are using an OEM version of windows, you will need to use the recovery options you have from the manufacturer of your computer. If you run a commercial version, feel free to follow the article in the knowledge base you have found.

  http://support.Microsoft.com/kb/307545 how to recover a corrupted registry

  I was also wondering if you have another computer to work? If so and you feel comfortable or know someone who can remove the hard drive from the computer and connect it to another computer. You can view the disk hard kit to join. Once the hard drive is connected, you can go in my computer and copy all the files to another hard disk.

  Georgio
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Stop: 0xc0000218 {registry file failure} the registry cannot load the hive (file): \SystemRoot\System32\Config\Software is damaged, missing, or not accessible in writing.

  Original title: blue screen.

  My computer won't start even in safe mode... c000218 (failure of a registry file)

  Cannot load the hive (file): \systemroot\system32\config\SOFTWARE is damaged, missing, or not accessible in writing

  Hi rookiegeek,

  You did it of any material changes or software on the machine prior to this problem?

  The three possible causes of the problem are:

  (a) failure.

  corruption of file b) & defective hardware.

  (c) the problem can occur on shutdown.

  You can follow this link & check if the problem persists.

  Registry troubleshooting steps for advanced users

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When upgrading to Windows XP SP3, Windows 7, it loads the temporary files, and then I got an error message saying "the install.wim file does not exist.

  When the upgrade of xpsp3 for win 7 it loads the temporary files and 1 min in step 2? "" departure ": an error message appears that says install.wim file does not exist?

  original title: problem installing win 7

  Hello

  You can't upgrade Windows XP to Windows 7.

  Windows 7 upgrade paths

  This document describes the upgrade paths that are supported and not supported for editions of the Windows® operating system 7.

  Unsupported upgrade scenarios

  • Upgrade to Windows 7 from the following operating systems is not supported:
  • RTM of Windows 95, Windows 98, Windows Me, Windows XP, Windows Vista®, Windows Vista Starter, Windows 7 M3, Windows 7 beta, RC of Windows 7 or Windows 7 IDS
  • Windows NT® Server 4.0, Windows 2000 Server, Windows Server® 2003, Windows Server 2008 or Windows Server 2008 R2
  • Upgrades on place of several architectures (for example, x 86 to x 64) are not supported.
  • Place of cross-language upgrades (for example, en - us en - us) are not supported.
  • Cross-SKU upgrades (for example, Windows 7 N to Windows 7 K) are not supported.
  • Upgrades from Windows Vista to Windows N, Windows K, Windows KN or Windows E are not supported.
  • Upgrades on place of type Cross-compiling (for example, the fre to chk) are not supported.
  • Pre-release in place upgrades across milestones (for example, Windows 7 RC to Windows 7 RTM) are not supported.

  Supported upgrade scenarios

  Company	Professional, company, full
  Enterprise	Enterprise
  Home Basic	Home Basic, Home Premium, Ultimate
  Home Premium	Home Premium, ultimate edition
  Ultimate	Ultimate

  Enterprise	Enterprise
  Home Basic	Home Basic
  Home Premium	Home Premium
  Professional	Professional
  Starter (x 86 only)	Starter (x 86)
  Ultimate	Ultimate

  Home Basic	Home Premium, professional, ultimate edition
  Home Premium	Professional, ultimate edition
  Professional	Ultimate
  Starter	Home Premium, professional, ultimate edition

• start the computer to start but stops at "failed to load the core file?

  Original title: how to get Windows XP to boot my computer from starting when starts but stops at "failed to load the core file?

  When I try to start my computer, it stops at "cannot load the kernel."  It will go no further. What is the solution?

  Please see: How to perform a Windows XP repair install

• Trying to access Windows XP on a Mac, receive stop error. failure of a file registry c000218 registry cannot load the hive (file)

  I have a Mac OSX, leopard, parallel 5 and Windows xp.   When I try to access Windows, either through boot camp or at the same time, I get the error message "stop. failure of a file registry c000218 registry cannot load the hive (file).  I bought Windows 7 but cannot get Windows Installer.

  The hard drive may be replaced . Or something is not compatible