AutoRecover to crushed to crush pre State (Wordpad)

Similar Questions

• Trace/breakpoint debugging installation

  Y at - it installation of track where you can see the rules as they are triggered. I would like to be able to set breakpoints when you are debugging rules to understand why this specific rule path is taken. I'm trying to detect why are not rules that should be applied to fire.
  
  Visualization diagram looks like right, but the rules are not shooting.
  
  Thank you
  Terry

  The goal of a facility to stop or point trace of sense in an environment where the future State can crush current state. for example. in most rules of style of rete engines, rules can be used to replace already completed, usefully draw a conclusion as an iterative process. View of the order of the day is useful in this case because you can see the values that can later be crushed, and there is a path you need to track to see how a final value is reached.

  It is not really supposed OPA because a value is only occupied by a single rule, and the rule never light up once (when new data entry are sent). You can still watch an attribute of conclusion, that proves the rule, and it's immediate dependent attributes in isolation to establish how came to a conclusion - examining "previous" snapshots of the engine cycle think mid-term does not provide any additional information that would not still be present after the cycle of thinking.

  If you encounter problems, see why a rule is interpretting your data in some way, perhaps you could post these three pieces of information (the conclusion, rule that turns to her and the dependent attribute values), we can explain it.

• Unable to connect to network WPA2 with Windows 7 64-bit (Intel 4965 and Cisco WUSB600N)

  Connect to a WPA2 network seems to be a fairly common problem.  Again, I can't be able to find a solution.

  OS: Windows 7 Ultimate 64-bit

  Wireless adapter (s): Intel 4965AGN (integrated into Dell XPSM1330) and Cisco/Linksys WUSB600N

  Drivers: latest windows 7 64 bit drivers from the two websites of companies.  Intel (v12.4.1.4), Linksys (3.0.10.0)

  Network properties: WPA2 enterprise, encryption of the ACS, authentication EAP - P, several types of routers around the world

  History: has been able to use the same laptop with Vista32 on this network without any problem

  I can not connect to networks non - WPA WPA networks simply not.

  When you try to connect to my companies WPA2 network (at any of our locations around the world).

  Method #1:

  1. Select "Other network" in the list of network
  2. Enter the SSID of the network
  3. Windows could not connect to the SSID
  Method #2
  1. Open network and sharing Center
  2. Select set up a new connection or network
  3. Select manually connect to a wireless network
  4. Select one of my adapters
  5. Enter the SSID, as WPA2-Enterprise security type, type of encryption like AES, check the boxes to connect automatically and connect even if the network is not broadcasting
  6. An unexpected error has occurred

  Method #3: Try to trick windows

  1. Open network and sharing Center
  2. Select set up a new connection or network
  3. Select manually connect to a wireless network
  4. Select one of my adapters
  5. Enter the SSID but select an open network
  6. Adds the network
  7. Then try to change properties
  8. WPA2-Enterprise security type
  9. Set to AES encryption type
  10. "Choose a network authentication method:" drop-down menu is empty!
  11. Windows has encountered an error saving the wireless profile.  Specific error: the profile has an invalid length field.

  I'm pretty desperate for a solution.

  Kind regards

  John

  There are a few people with Win7 x 64 that cannot connect to WPA2 P/EAP Corporate/business networks and no solution?

  Come on, guys, it's the microsoft answers site! someone give me something! I have two asus laptops, both with network cards Intel having this problem on two networks separate enterprise (school).

  Edit:

  RESOLVED:

  Here's the thread of the resolution:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/unable-to-connect-to-company-wireless-network/3bcd12b1-A0D8-4357-bded-07da96259920?page=3

  The problem occurs when you perform a Wizard for easy transfer to a computer that was Symantec Endpoint Protection installed to one without him.

  Answer, copypasted:

  Inspect the key mentioned above - that is of HKLM\System\CurrentControlSet\services\RasMan\PPP\EAP.

  In each of the number keys look something like ConfigPathBackup and its corresponding ConfigPath - there are a number of them.

  For each, I deleted the original key (e.g., ConfigPath) and restored the original by renaming ConfigPathBackup to ConfigPath

  For each of them, the State is now restored to her pre State Symantec - each key pointed to a Symantec location that is no longer present and by restoring the path key backs up everything was fine

• I have all the sounds, BUT those of Windows Media Player 7.

  I have all the system sounds, sounds of a PowerPoint presentation, etc.. No sound of anything that uses Win 7 Media Player.  Video is very good and the bar at the bottom, which indicates that a piece of music from a CD plays forward as if he were playing, but I don't hear anything.  Ran a Uniblue registry cleaner a week ago and I don't think that the WM Player souand works since.  Restored the registry to its 'own pre' State, still no sound in WMP. just from the video.  Also installed Win 7 SP1 which asked me to set up the media player.  He said yes, he had run, duly filled, no sound!  Any suggestions?

  You hear no sound when you play a MP3 file in Windows Media Player?

  Please make sure that the sound is not muted in WMP, and that the volume is high enough.

• Crushed hard disk with pre-installed vista home premium

  Hi on HARD drive of my acer laptop suddenly crushed and to customer Service told me to buy a new HDD hwat can I still recover my vista preinstalled inside or can microsoft just send me the cd of installation for vista my vista key is stuck under my laptop in the hope to hear from you thank you guys, you

  VIC

  Microsoft does not disks for computers of brand manufacturers.

  https://secure.TX.Acer.com/rcdb/main.aspx?brand=Acer

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• Safari keeps crushing

  Hello, today I opened safari as usual but it suddenly crushed and from then until now I can't open the app. It opens then the rainbow circle/cursor appears and after a few seconds, it crushes. What is the problem? It's a virus or a malware?

  (I am currently using mac os x el capitan 10.11.1)

  Please quit the application. Force quit if necessary.

  He raises in holding down the SHIFT key and clicking on its icon. This action prevents the last State of the window to be recharged.

• My Nero8 crushed & stoped working: the failing Application path

  My Nero8 crushed & stoped working: the failing Application path: program files Files\Nero\Lib\NMIndexStoreSvr.exe how can I Nero8 back to work without having to buy a new there upgrade version (Nero AG) they offer for me as a single fix?

  Hello

  1. you made any hardware or software changes the computer recently?

  2 is the issue limited to Nero 8?

  3. what operating system is installed?

  Try the following steps.

  Method 1.

  Step 1.

  Uninstall Nero 8 using the tool to uninstall Nero 8: http://www.nero.com/enu/support-nero8-tools-utilities.html

  Step 2.

  You can download Nero here: http://www.nero.com/enu/downloads.html

  Clean boot the computer and then try to install Nero 8. Tuning your system to start in mode minimum state helps to identify third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 2.

  If the steps above do not help, then contact support for Nero here: http://www.nero.com/enu/support-contact.html

  I hope this helps.

• ocrconfig - crush

  Hi Experts
  
  I read the following in the document:
  [url http://download.oracle.com/docs/cd/E14072_01/rac.112/e10717/votocr.htm#CHDJDFIC] Deployment and Administration Clusterware Oracle® Guide
  
  >
  The substitution of the mechanism of Protection Oracle Cluster registry data lost
  
  OCR has a mechanism that prevents data replaces accidental loss. If you configure an OCR mirrored and Oracle Clusterware is unable to access the locations of OCR in mirror and also cannot verify that the available OCR location contains the latest configuration, Oracle Clusterware still prevents changing the location available from OCR. In addition, the process prevents the crash banning of Oracle Clusterware start on the node on which a single OCR is available. In this case, Oracle database displays a warning to Oracle Enterprise Manager, Oracle Clusterware alerts log files, or both. If this problem is local to a single node, you can use the other nodes to start your cluster database.
  
  However, if you cannot start any node cluster in your environment and you can repair OCR or restore access to all locations of the OCR, you can override the protection mechanism. The procedure described in the following list to start the cluster using the location available from OCR. However, the substitution of the protection mechanism can cause the loss of data that were not available when the previous known good state was created.
  
  Note:
  The substitution of OCR using the following procedure may result in loss of the OCR updates that have been made between the time where the last known good OCR update made available OCR at the moment and the time at which you have made the replacement. In other words, current of the replacement ocrconfig-order execution can result in loss of data if the location of the OCR that you use to perform the replacement does not contain the latest updates of configuration in your cluster environment.
  >
  
  I have a question:
  
  >
  Where ocrconfig Gets the OCR Information to crush the damaged OCR?
  
  >
  
  
  I saw:
  [url http://download.oracle.com/docs/cd/E14072_01/rac.112/e10717/ocrsyntax.htm#BABBDCJB] Deployment and Administration Clusterware Oracle® Guide
  
  >
  ocrconfig - crush
  
  Use the ocrconfig - replace command to crush an OCR configuration in the OCR metadata with configuration information current OCR that is located on the node on which you run this command.
  
  But where on the node is to find information? Anyone know?
  
  >
  
  
  Thanks and greetings
  
  hqt200475
  
  Published by: hqt200475 on March 31, 2011 07:09
  
  Published by: hqt200475 on March 31, 2011 07:21

  Hello

  everything which

  ocrconfig - crush

  the fact, she tells the clusterware starting with an OCR pole sees (for the moment).
  It doesn't fix anything or overwrite the data. He just "replaces" the safety mechanism, which does not allow the cluster to start with light as an OCR (from 2).

  Technically, it changes just 2 locations /etc/ocr.loc to only contain one.

  Concerning
  Sebastian

• ACVHD 1440 x 1080 60i converted to SD is crushed?

  Hi there will...

  First of all, as I see many others, I'm new here HD edition, thanks a lot for all the help of those who have the knowledge!

  Ok.. My problem,

  I have a few fottage .mts recorded on my new Sony HDR-CX550v

  I use CS4 master suite (first and still)

  Remains with HP PC

  The source is 1440 x 1080, 60i

  I want to convert to serious SD and play on a regular DVD, again using

  I went to Jeff Bellunes Tutoriels (who have been great, I learned a LOT) on the HD - SD conversion... BUT...

  all his examples use HD 1920 x 1080 xx, so...

  I shot some test footage at 1920 x 1080 60i and intervened although its procedure and it worked great... BUT...

  (and that's the problem)

  As noted above, the actual source footage, I NEED to convert was filmed in 1440 x 1080 60i (widescreen)

  I used the same procedure as 1920x1080i Jeffs tutorial, but when I took the result, then out again

  (nothing special yet... just did a simple a word-transformed into a button in the menu, linked the timeline button, related the end action of the calendar back to the menu, then returned to a folder and engraved on a DVD)

  When played on the DVD SD the result low high Squashed crushed another drive... makes everything look small and bigger...

  When I started the project in first, I adapted the source: X.V. 1440x1080i30 (60i anamorphic)

  that, in the first are States in the preset description box:

  For editing AVCHD Formats saved in 1920 x 1080 anamorphic (ex.1440x1080).
  16:9 video HD interlaced at 29.97 frames per second.
  audio at 48 kHz.
  Timecode offset for numbering.

  --------------------------

  General
  Editing mode: AVCHD 1080i anamorphic
  Time Base: 29.97 FPS

  Video settings
  Image size: 1 440: 1080v (1.3333)
  Frame rate: 29.97 FPS
  Pixel format: HD 1080 anamorphic (1.333)
  Fields: Upper Field First

  Audio settings
  Sample rate: 48000 samples/second

  Default sequence
  Total of the video tracks: 3
  Master the track type: stereo
  Mono tracks: 0
  Stereo tracks: 3
  5.1 channels: 3
  SUBMIX mono tracks: 0
  SUBMIX stereo tracks: 0
  5.1 submix tracks: 0

  I guess that's the correct preset for my images...

  And then following the tutorial by Jeff for 1920x1080i

  I'm in the media encoder,

  Export media

  Choose MPEG2-DVD Format

  NTSC widescreen high quality as a preset

  In the video tab: change the order of the fields to stem

  Bitrate settings changed: Encoding Bitrate VBR 2 pass.

  Change Min.Bitrate to 2.8, flow target flow and 7-8

  make the selected maximum use,

  left on zero multiplexer

  and kept the default audio settings

  then moved on to M2v and associated .wav file

  Here's what I imported as assets in, made to a TS file and burned on a DVD

  I also did a .wmv export by using the windows media format / NTSC widescreen to download high quality preset

  for a file to load up on youtube... and it seems well... no crash and the quality is very good.

  () http://www.youtube.com/watch?v=mK9n7zjXMS8 ( )

  the settings in the tutorial do not work for 1440x1080i? Like I said before, when I used the images of test 1920x1080i, he played on the DVD SD player perfectly with GREAT quality...

  Please any help would be greatly appreciated... hope I'm not on for more details...

  I really need to get these images converted...

  Thank you

  CB

  I'm in the media encoder,

  Export media

  Choose MPEG2-DVD Format

  NTSC widescreen high quality as a preset

  In the video tab: change the order of the fields to stem

  Bitrate settings changed: Encoding Bitrate VBR 2 pass.

  Change Min.Bitrate to 2.8, flow target flow and 7-8

  What setting did you use for the format of pixels?  Did you leave it by default?

  What your DVD player?  What you set as the display format (Normal, wide screen, stretching, etc.)?  What type of TV?  You have a big screen HDTV or a standard 4:3 CRT?  The settings in the DVD player matches the type of TV?

  Finally, when you import the M2V file in en, in interpreting it correctly, IOW, it appears correctly in the preview yet?

  -Jeff

• I connect external hard drive to crush

  I have a disc external hard - is possible to connect to my crush on the MacBook Pro and it moves faster when it connect to the USB port?

  You can get a bolt of lightning > USB adapter, but it will not be a more quickly as the connection from one player to a USB port on the Mac unless you use several USB drives to a USB connection.

• Crush the display flashes for 2-3 minutes after that mini mac wakes up from sleep

  Crush the display flashes for 2-3 minutes after that mini mac wakes up from sleep

  If you have another Thunderbolt cable, plug it into the unused port on the

  Thunderbolt Display and then in the Mini and see if the same thing happens.

  What you can see is a precursor of the poster, built out of the cable.

  At least, it could eliminate a costly repair problem.  Although the cable itself is not

  expensive, opening to the top of the screen of TB to replace could be.

  Well that not connected on a Mini, I began to see in similar behavior my

  iMac, so that there was finally a break in the complete cable.

• Why do I need Adobe Flash to play FB Candy Crush when I don't need in IE?

  When I open the crush of Candy FB using Internet Explorer, it plays very well, without asking me to download Adobe Flash Player. However, when I do the same thing using Firefox, the game does not load without me download Adobe Flash Player. I had constant problems with Adobe and do want to not have it on my computer. Why this is happening and how do around him. Firefox is my favorite browser, but I'll find something else if I have to.

  I suspect Candy Crush uses Flash in Internet Explorer, too, but because Firefox and IE use plugin technologies, there are different installers for each browser.

  Since so many sites use Flash, maybe we can help you solve the problems you are having.

  You can download an installer for Flash 18.0.0.209 on this page:

  https://www.Adobe.com/products/flashplayer/distribution3.html

  In the first table, find the row corresponding to "browser plugin", and you can use either the EXE or the MSI installer.

  To ensure that the old version is removed, please close the tabs that are using Flash, or quit Firefox, during the update.

  Then, depending on the nature of the questions that you have had, here are some common troubleshooting steps:

  (1) If you have any recorders/downloaders who interact with Flash media to ensure that they are as up-to-date as possible, or disable them temporarily.

  (2) disable Flash to use hardware acceleration

  Right click on the media player and click on settings, then the first mini tab and uncheck the box to use hardware acceleration. More information in this article from Adobe technical support: http://helpx.adobe.com/flash-player/kb/video-playback-issues.html#main_Solve_video_playback_issues

  (3) disable protected mode

  The functionality of the safe_mode of the Flash player plugin has security benefits, but there seem to be some compatibility issues on some systems. There is a hidden for this parameter:

  (A) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (B) in the search above the list box, type or paste the flash and make a pause so that the list is filtered

  (C) double-click the preference dom.ipc.plugins.flash.disable - protected mode to change its value from false to true.

  It cannot take effect until all the Flash was discharged for a few minutes, or you close Firefox.

  Any improvement?

  If you want to solve this, it might help avoid unnecessary pain on the sites where the Flash is not really essential, try to set the Flash on Click-to-Play (Ask 'activation'). This will delay the Flash start on a page, until you approve.

  To set 'Ask to activate', open the page modules using either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click on Plugins. Search 'Shockwave Flash' and always change 'enable' to 'ask to activate '.

  Then when you visit a site that wants to use the Flash, you should see a notification icon in the address bar and usually (but not always) one of the following values: a link in a black rectangle in the page or an information bar slides between the toolbar and in the page area.

  The plugin notification in the address bar icon usually resembles a little Lego block, dark gray. When the page wants to use a plugin to soft-blocked, the icon turns red to warn you of anxiety.

  If you see a good reason to use Flash, and the site looks trustworthy, you can go ahead and click on the notification icon in the address bar to allow Flash. You can trust the site for the time being or permanently.

  But some pages use Flash only for tracking or play ads, so if you do not see an immediate need for Flash, feel free to ignore the notification! He will just stand here in case you want to use it later.

• How to configure firefox to open outlook e-mail links in a new tab instead of having this "crush" a tab currently open?

  How to configure firefox to open outlook e-mail links in a new tab instead of having this "crush" a tab currently open? For example, that I have a tab open and consult the information about this. An email comes in via outlook and I want to read a confined link. When I click on the link, it will open in the tab I have currently open. I would like to open it in a new tab.

  You mean Outlook, the standalone version and not the new iteration of Live (live.com) mail to Outlook.

  I think that the default is to open in a new tab in the last active window, but you can check it out here and replace the default value:

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste link.o and make a pause so that the list is filtered

  (3) double-click the preference browser.link.open_newwindow.override.external and change it to 3 and OK change

  The options are:

  -1 = apply the setting in Options > general > tabs of external links (default)
  3 = open external links in a new tab in the last active window
  2 = open external links in a new window
  1 = open external links in the last active tab replaces the current page

• Candy crush soda

  After the last update candy crush soda and jelly won't have to log in with another Facebook account, help!

  have you tried to contact the developer of applications for a possible workaround?

• Crush the account for new host settings does not work.

  I would be grateful if someone could help me, my email hosting company a supplier has changed, but my two addresses remain the same. Crushing my two POP3 accounts with the new settings of the server does not work. I checked with the new owner that the settings are correct, but they suggest that this problem is probably down to Thunderbird and profiles in a way works and is outside their mission of support. My provider is puzzled, but to be honest I only have a small amount of ability here. I need to keep all of my old emails and their structure files and to get the connection to the new servers host works. Anyone who wants to help?

  Thank you, Simon

  I had the help of my provider to fix this.

  Basically, you cannot overwrite an existing account with new parameters. The answer is to create a new account and edit the old one so it does not carry the same settings of server and user name. Now, I spend all my archives of old emails to the new account, but which is described elsewhere, I think.