Problem with turning off hardware acceleration.

Similar Questions

• Unable to turn off hardware acceleration in Windows 7?

  I can not turn off hardware acceleration for troubleshoot change settings is grey shadow on. I really need to change hardware acceleration to make the flicker of judgment of the cursor. I have Intel 82945 g GMA. I know that Intel GMA is not the best but I could change the hardware acceleration is Windows XP. Please tell me how to disable acceleration or the slider will upset me to death. I have Intel GMA utility and has no ability to change or disable hardware acceleration.

  My system:
  Windows 7 Ultimate 32 bit
  Pentium 4 3.00 GHz
  1.50 GB OF RAM DDR2
  HARD DRIVE 80 GB
  Intel 82945G (Intel GMA 950)

  Please answer before my funeral! Laughing out loud!!

  Hello

  Method 1: In order to troubleshoot mouse flickering issue, I would say you run the hardware and devices Troubleshooter and check if it solves the problem:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: update the driver graphics card and the mice and other pointing device and then check if the problem persists or you are able to adjust the hardware acceleration.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• Turn off hardware acceleration to resolve failures and defects of graphics.

  A few weeks ago Thunderbird updated itself, and the life of my email went to hell. The continuous black screen. Often he was missing all the icons on e-mail records. I had often to minimize and reopen Thunderbird to see anything. I kill then restarting it maybe 8 times a day when he hooked completely. He crashed himself and sent error reports, perhaps 20 times a day. Absolutely horrible.

  Finally, I found this article, which explains how to disable hardware acceleration:

  http://www.askvg.com/how-to-disable-hardware-acceleration-GPU-rendering-in-Mozilla-Firefox-4-0-to-fix-font-problem/

  It worked. Apparently in one of the recent updates, enabled Thunderbird when hardware acceleration for my system, he had to be turned off. (I vaguely remember turning it off before.)

  In addition, there are a simple switch off in the Options.

  "Tools" > "Options" > "Advanced" > "Général" tab
  or
  'Icon menu' > 'Options' > 'Options' > "Advanced" > "Général" tab

  To turn off:
  Uncheck the "use hardware acceleration when available.
  Click on 'OK '.

• The menus are unusable, even to turn off hardware acceleration to fix menus

  I'm using Firefox under awesome on Ubuntu 13.04 on a MacBook Pro of the retina. Unfortunately, the menus are completely unusable. If I try to open the 'Tools' menu, for example, a small floating window appears which is barely big enough to show and down the scroll buttons, but no other text.

  This problem has occurred on and off for many years. The recommended solution is usually to disable hardware acceleration... via a specific menu. Unfortunately, this does not work for me, since I can't navigate the menus. I looked into: config to see if there was an obvious option, but didn't fine anything.

  I have a screenshot of what the menus look like, but unfortunately do not know how to fix it.

  For unrelated reasons, I reinstalled ubuntu. I could try Firefox again, and the problem disappeared! Time to move from Chrome to Firefox! Unfortunately, I do not know what is specifically modified to correct the problem.

• Need help to turn off hardware acceleration Flash 10.1!

  Okay, that's the situation. I have a older laptop with a faulty graphics card. As this machine is used only for the work of the College and the occasional websurfing, such as youtube, it wasn't a problem. Until you released this version of Flash Player.

  As with almost anything ask for hardware acceleration, when it begins the whole macine freezes. No BSOD, actually lock up can't do anything until I have remove the gel battery. So I need a way to disable hardware acceleration without going through a flash page.

  I must say, I find the fact it runs automatically enabled, without asking the user if it is one) wanted to b) useful on the machine in a matter of great concern. And I wonder how many other users of laptop capable of acceleration no HW are that their laptops do not work all of a sudden... Please can you make this an optional feature in the future versions, as you do with recording files on the hard disk, for example?

  If you go to http://www.adobe.com/software/flash/about/ - is she also locked up?  Otherwise, right-click on the Flash object, and then change the settings.

• Firefox crashes when I open it (except in safe mode). Reinstalled twice, did not help. Also, turn off hardware acceleration, etc.. Windows XP, Firefox 6.

  Whenever I try to open Firefox, it hangs and does not open. Get the crash reporter. I've uninstalled and reinstalled twice, but it did not help. Follow the instructions on your site for the modules disabling and disabling hardware accerlation. Firefox crashes in Mode without failure. I use the latest version of Firefox with Windows XP. Thank you

  
  

• Now on windows 7, the games running slow - update video card driver error message and/or turn on hardware accelerator. Sony supporting not - how make to identift video card in my laptop?

  Now on windows 7, the games running slow - update video card driver error message and/or turn on hardware accelerator.  Sony supporting not - how make to identift video card in my laptop?

  Press the Windows key, type in "Device Manager" without the quotes and the Device Manager select from the list that appears, or press ENTER.

  In the window that appears, find graphics card and press the sign more or arrow to the left of it. It should fall down the name of the video card you have.

• A problem with your video hardware (video hardware error) caused Windows to stop working correctly.

  Product

  Windows

  Problem

  Video hardware error

  Date

  06/11/2009 19:16

  Status

  Not reported

  Description

  A problem with your video hardware caused Windows to stop working correctly.

  Signature of the problem

  Problem event name: LiveKernelEvent

  The system version: 6.0.6001.2.1.0.768.3

  Locale ID: 1033

  Files helping to describe the problem

  WD-20091106 - 1913.dmp

  SysData. XML

  Version.txt

  Additional information about the problem

  BCCode: 117

  BCP1: FFFFFA8009C16260

  BCP2: FFFFFA60026F1220

  BCP3: 0000000000000000

  BCP4: 0000000000000000

  OS version: 6_0_6001

  Service Pack: 1_0

  Product: 768_1

  Hello

  BCCode: 117 is generally a problem of display driver (video) If you need to update (check the system machine
  and the sites of the manufacturer of the device. You will need to remove and reinstall your video card a PC and not
  edge. Perhaps a replacement card is necessary.

  If necessary you can perform in SafeMode with network - repeatedly F8 tap that you start.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• A problem with your video hardware caused Windows to stop working correctly.

  Description
  A problem with your video hardware caused Windows to stop working correctly.

  Signature of the problem
  Problem event name: LiveKernelEvent
  OS version: 6.0.6001.2.1.0.256.1
  Locale ID: 1033

  Files helping to describe the problem
  WD-20090325 - 1017.dmp
  SysData. XML
  Version.txt

  See a temporary copy of these files
  WARNING: If a virus or other security threat caused the problem, open a copy of file can harm your computer.

  Additional information about the problem
  BCCode: 117
  BCP1: 84E10510
  BCP2: 8DA1F4B2
  BCP3: 00000000
  BCP4: 00000000
  OS version: 6_0_6001
  Service Pack: 1_0
  Product: 256_1

  Hello Neo22,

  Thank you for using the Microsoft Windows Vista Forums.

  When you receive this error?  Have you recently installed a new hardware?  Have you updated your drivers?  Please indicate any other information which could help identify it.  I've added a link specifically for the video material that could help.  Please let me know if you still encounter problems or if you have any other questions.

  http://windowshelp.Microsoft.com/Windows/en-us/help/648bead6-2e88-4B68-8771-d4358bdd8ab41033.mspx engineer in Support of James Microsoft answers visit our Microsoft answers feedback Forum and let us know what you think.

• Works with Windows XP SP2 with IE8. A Norton 360 process ccSvcHst.exe CPU consumption. Upgraded to version 4.0.__Now IE8 Norton is very unstable, different processes consuming CPU even with turned off Norton. __

  I opened a folder support with Norton a couple of days, for a problem with ccSvcHst.exe cripling process my system by consuming my CPU.  I found that it was a common problem, and so I wanted Norton to solve.  Their guy accesed my remote system support and made a few changes to my configuration utility and my registry files and then upgraded my version of their latest version 4.0

  After the end of the support session, I finally restarted my system and encountered an error on my configuration utility being in a State of diagnosis, then that I should put it in a normal mode and restart again.  I noticed that it had disabled the start of my services.  I selected a normal startup and restarted.

  The problem with ccSvcHst.exe consuming my CPU is now resolved - be replaced by different processes consuming my CPU and use of extremely heavy memory (or misuse).  Faulty processes are mostly explorer.exe and iexplore.exe.  Not only that, but this current problem exists even when I turn off Norton.  I tried you connecting another deal with them, but they will not address the issue, since the problem (now) exist even without Norton running.  So, basically, they made the problem worse and then pushed him on Microsoft to resolve the issue.  It's really nice...

  Anyone have any ideas?

  It seems that your computer is infected. I get this from the fact that iexplore.exe (Internet Explorer) is running. If you haven't started IE yourself, then it is a clear symptom of malware infection.

  Through these generals the malware removal not systematically - http://www.elephantboycomputers.com/page2.html#Removing_Malware

  Include analysis with David Lipman's Multi_AV of and follow the instructions to do all scans in Mode without failure. Read the Special Notes about the use of Multi_AV in Vista.

  http://www.elephantboycomputers.com/page2.html#Multi-AV - instructions
  http://tinyurl.com/yoeru3 - download link and further instructions

  When it failed, download Guided Help. Choose one of the specialty forums listed on the first link. Save and read his FAQ display. PLEASE DO NOT DISTRIBUTE NEWSPAPERS IN MS FORUMS

  If you can't do the work yourself (and there is no shame in admitting this isn't your cup of tea), take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). Please be aware that not all shops are skilled at removing malware, and even if they are, your computer may be so infested that Windows will have to be properly installed. If possible, have all your data backed up before taking the machine into a shop. MS - MVP - Elephant Boy computers - don't panic!

• Power problems: computer turns off when the power supply cord is unplugged.

  original title: power problems: computer shit turned off when the power supply cord is unplugged.

  I have a HP Pavilion dv2000

  Windows vista home premium/sp2

  AMD Turion (TM) 64/2 1.80 ghz processor

  1 GB memory

  32 bit operating system

  I have 2 problems with this laptop.

  !. I have lost the power cable and bought an expensive one online step (model: PA-1650-02 c. input 100-240v 1.5 put out a(1,5A) 18.5V 3. 5 = a)

  When I first plugg cord battery charge light came on the balance, then he started to come on and outside.

  now its completely off, even with the power cord plugged in. on the lower right part of the screen its showing that cord is connected to the power supply and the battery is fully charged, but as soon as I unplugg the power cord or remove the computer cut right away.

  the second problem is that the left mouse botton does not work, the work aside right very well. I went in the proprties to put it right, click on to, but who does not work either. I've updated the drivers but still nothing.

  Any help will be greatly appreciated.

  Hi aloum,.

  (a) what kind of mouse you are using?

  (b) the left button of the mouse seems to be stuck or it does not meet the click? This only happens with certain applications?

  Step 1: Test the mouse on another computer or another mouse on the test computer

  To determine whether the mouse or the computer is defective, follow these steps:

  1. test the mouse in question on a system that works, you know. If the problem appears to follow the mouse, you may need to return or replace the mouse.

  2 test a mouse you know is working on the computer in question. If the problem seems to stay on the computer, then the problem is most likely related to the software.

  In regard to the battery not holding charge

  Battery problems are often associated with the battery itself. If you encounter this problem, contact your mobile PC manufacturer. If you purchased the battery separately from the notebook computer, contact the manufacturer of the battery.

  Troubleshooting battery problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-battery-problems

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Analog multichannel peculiar read problem with PCI-6014 - hardware problem

  Hi all

  I see some very special behaviors with a 6014 when I do a multi-channel analog playback.  I am revamping of existing code to a customer, which implies the passing of the traditional DAQ in the DAQmx.  Traditional DAQ does not use a system based on the tasks, my client was in the process of reading clocked by the software for only one channel at a time, depending on what signal was of interest to both.  (application is a series of tests on a control PCB who will interface with some hardware, checking the answers and tensions and others)

  When I rewrote the application using DAQmx, I created a single task that contains all of the analog inputs of the map (AI0:15).  When I am interested in a particular signal, I indexed the channel since the reading chart data.  The strings that contain the actual data are 0, 1, 3, 4, 5, 6, 7, 13, 14 and 15.  All channels are NRSE.

  One of the signals of interest lights AI7.

  When I connect the AI7 signal with an oscilloscope, I read 2.5V - which is exactly what I expect to see.

  When I read AI7 using MAX, I read 2.5V.

  When I read AI7 by itself using a single channel DAQmx reading (i.e. 1 Samp 1Chan or 1Chan N Samp), I read 2.5V.

  When I read AI7 simultaneously with all the channels that have a greater number of channel (i.e. AI8-15), I read 2.5V.

  When I read AI7 simultaneously with any channel that carries a lower channel number (i.e. AI0-6), I read 2.34V.

  ?????

  For example, if I read AI0:15, I read 2.34V on AI7.  If I read AI0:7, I read 2.34V.  If I read AI7:15, I read 2.5V.  If I read AI7:10, I read 2.5V.  If I read AI6:7, I read 2.34V.  And so on.  Any combination of playback channel which includes results AI0 AI1, AI2, AI3, AI4, AI5 or AI6 during a misreading on AI7.

  All channels read because they are supposed to, no matter what channel is included in the job.  AI7 is the only one that illustrates this behavior.

  I wrote code for the acquisition of data for 10 years now and I have never seen anything like this before. The behavior is consistent.  I am sure that it is a hardware problem with the Special Commission that I use.  That's the advice of my customer, I don't know when they bought it, but I think they have had for years.  I doubt that ever, it has been calibrated.

  I guess it's more I'm curious than anything else - what on earth would cause this behavior?

  I'll tell my client to replace the card, if really I just asked my own knowledge.

  
  

• Problem with the new hardware wizard and PCI bridge PCI to PCI standard

  I have problems with VMware Fusion 2.0.2 on my MacBook Pro (Mac OS X 10.5.6).) The guest from Windows XP Pro (SP2) Found New Hardware Wizard keeps wanting to install a software for "PCI standard PCI to PCI bridge". I tried to do 'automatically' and "install from a specific location" using the Windows disk, the MacBook Pro and the Mac OS X disk. In each case, I get the message 'not succeeded the Windows Logo test'. If I click on "continue anyway" is seems to load pci.sys to C:\Windows\System32\drivers. I click 'Finish' in the last window but it begins the loop again and again and again. The virtual machine network adapter is set to NAT and everything seems to work fine, but I can't stop this annoyance. Any ideas?

  There are 32 of these devices.  How many times have you finished yet?

• Trial of CS5 WinXP64 with GTX260 no hardware acceleration?

  Hello world!

  I can't have hardware acceleration in the trial version PS CS5 Extended that I just installed on my work machine.

  I have a 64-bit computer to Windows XP, with a Nvidia GeForce GTX 260 graphics card.

  I installed the trial version of PS CS5.  In Preferences > performance, the GPU settings box is grayed out. The description says that graphic hardware acceleration is unavailable.  "You need to update your video driver and, possibly, your video card."

  I know that the GTX 260 is taken into charge-it works fine on my home machine, which is Win7.

  I installed the latest nvidia version 197.45 drivers.  No change.  I even uninstalled the nvidia drivers, did a cleanup of the drivers in safe mode with Driver Sweeper, according to another post here and reinstalled the latest nvidia drivers.  Still no change.

  Any ideas?  Is it because I'm running winxp64?

  Thanks a lot for your help!

  DB

  You can try this until they display the register CS5 hacks: http://forums.adobe.com/thread/628944

• I need assistance with turning off tension or turning off the video card integrated on my inspiron 530!

  I need help to turn off the power or turn off the video card integrated on my inspiron 530, I had the drivers of the 8600gt installed and ready, but whenever I put the DVI in I get a black pic, so I did research online and I found the way, and that is to disable the video card intel which is located on the motherboard then how?

  I learned that I have to press F2 on the screen of the BIOS and go somewhere.

  so please help me!

  Thanks in advance

  Here's my card, if you need em

  Amount Total of Dell Inc. manufacturer of model system Inspiron 530 system memory 2,00 GB RAM System 32-bit operating system to type number of processor cores 2 64-bit capable Yes storage Total size 298 GB hard drives (C :) disk partition 162 GB free (288 Total GB) disk partition (d :)) 6 GB free (Total of 10 GB) Media Player (e :)) disc of CD/DVD media (g) adapter DVDCD/disc display of graphs of type Intel (r) G33/G31 Express Chipset Family graphics Total available 286 MB dedicated graphics memory 0 MB system memory dedicated memory 128 MB shared system memory 158 MB display adapter driver version 7.14.10.1437 monitor main resolution 1440 x 900 version DirectX DirectX 9.0 or better)) network card Intel (r) 82562V-2 10/100 Network Connection Network Microsoft Tun Miniport Adapter