AutoStart application

Similar Questions

• How to disable the autostart (application) when restarting the server managed?

  Hi Ppl,

  How to disable the autostart (application) when restarting the server managed?

  I want that some apps do not stay started. In WebSPhere, we have an option to disable auto-start for the application.

  I don't find in weblogic.

  Thank you

  You can force stop the application before you restart the server.

  -Faisal

  http://www.WebLogic-wonders.com

• WINDOWS MEDIA

  WHEN I GET AN EMAIL THAT GOES TO WINDOWS MEDIA, I GET A MESSAGE THAT IT IS LOW ON MEMORY AND CLOSE ALL PROGRAMS AND TRY AGAIN. HE DOESN'T SE NOTHING HAPPENING WHEN I DO THIS

  You know "" how much RAM memory is your computer?  In addition, what programs are based 'Autostart' application are running when you use your email program?  Also, what version of Windows Media Player?

• The Essbase 11.1.2 - Urgent Service error

  Hi all
  
  I got a 11.1.2 planning environment set up on two W2k8 x 64 machines VMS. The Essbase service failed for the second time now. Earlier, is that the beginning of setting up the environment so I reinstalled Essbase and he started to work very well. Now again once it began to stop after running for a few seconds.
  Tried booting using the OPM, start menu, as well as through the command prompt. Here it is what is available in command promt.
  
  From Essbase.properties
  A subdirectory or file C:\Apps\Oracle\Middleware\user_projects\epmsystem1\diagnostics\logs\starter already exists.
  Apache Ant version 1.7.0 compiled on December 13, 2006
  BuildFile: C:\Apps\Oracle\Middleware\EPMSystem11R1\common\config\11.1.2.0\resources\instance\start.xml
  Finishing Essbase.properties
  
  Grateful if someone can provide some solutions or reasons for this problem. How can I start it without having to reconfigure or reinstall?
  
  See you soon,.
  Abhishek

  Hello
  I got the same error. Check Agent port 1423 and 32768 ubnoccupied by other processes.
  Replace the s file with the .postUPM one.
  This will start with the sample essbase applications only. If this does not work, one of your applications is may be corrupted.

  If you got your autostart applications and one is broken, it will crash the essbase server during startup and can damage the secfile so.

  hope that helps

• Autostart - foreground application

  Hi all

  I use RIM-MIDlet-flags-1:1 for autostart my request but I want it shows a screen at startup - I'm pushing the screen and asking the foreground but although the application automatically starts the screen don't be pushed to the forefront - can I do something to achieve?

  Regads

  Alex

  did you check the boot process? the boot process is already over?

  see this example:

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800505/800608/...

  find this comment:

  Check if the BlackBerry has completed its startup process.

  Once the boot process is completed,

  Push your screen using pushGlobalScreen().

  hope that helps.

• How can I determine which applications and processes are turned on at first upward and how can I keep their autostart?

  My office of gateway using Windows XP takes a long time to start.  I hear a lot of activity because it starts and after a very long time, I can really use it.  I would like to know what process or applications start automatically and then determine which ones to move away and how.

  If you were to Google something like:

  XP boot manager

  You will get hits with links to managers of free starter like this simple:

  http://www.MLIN.NET/StartupCPL.shtml

  Another popular and free tool with a built-in startup manager (and other interesting things) are CCleaner which you can download here:
  http://www.Piriform.com/CCleaner

  CCleaner allows you to manage most of the startup items and also do some other operations oriented cleaning.  Some people will you recommend is not to use the registry functions in CCleaner to avoid these features for now.  I have no problem with it for me, but sometimes it's a contentious issue, I prefer to avoid as much as possible!

  You can uninstall CCleaner later if you don't like it.

  You can disable the startup items, see how things look and if you want - you just delete them (or leave it off).

  After launch of CCleaner and see what startup items you can disable/remove, if you are still not sure of your startup items, follow these steps:

  Run CCleaner and choose Tools, boot and bottom right, click on the button "Save to text file" to save the startup information in a text - something like startup.txt file

  Save the boot information text file on your desktop (or somewhere you can find it) open the text file with an editor (Notepad or WordPad), select all (Ctrl-A), copy text, all the text selected in the Windows Clipboard (Ctrl-C) and then paste (Ctrl + V) the contents of the startup list to come back here in your next reply and maybe someone can tell you another thing to consider.

  A more revealing startup Analyzer is Autoruns which will allow the manipulation of all sectors of boot and does not actually install anything:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  I have zero startup items on my computer, so none of this is important to me!

• Question library application AutoStart

  Hello and good day,

  Please I have a blackberry app and then a project of library of the application (auto-run on start up), I configured the library project to work with the main project as construction and export configurations, it works fine on the Simulator, but when I load it on the device that I seem to get questions, say module not found is not an installation ota though , it's the ide load on device option I used it so far, thank you.

  I solved it, I did configure tehe rim size of cod and wheels options code url of the file jad to pint to the properties of the library application .cod file, thanks.

• Run a LV-application on the remote computer

  Hi all

  I am trying to install an App LabVIEW functioning as a server in our local network. I might add this as a service in the respective machine autostart. However, I prefer to have a method to start the respective application of a different LV (vi or exe) go elsewhere in the local area network. This means that potential customers can start the server if it is not yet done.

  Does anyone have an idea? Searched for examples and the internet for no results.

  TIA!

  Greetings from the Germany!

  --

  Him

  This question comes up a lot.  And I always recommend PsTools from SysInternals:

  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896649.aspx

  They are a free set of command line utilities.  One of the utilities is PsExec which can be used to launch the exe on remote computers.

  NOTE: Remember that setting up your remote application as an "NT Service" is a little more complex.  If you manage to actually implement a 'service', you would actually use a different tool (PsService) to start a service on a remote computer.  Either one will do the job.

• Windows Defender 'Application could not be initialized 0 x 80070006' at startup

  When I turn on my computer a window appears with the title "Windows Defender".  He goes on to say "0 x 80070006 initialization failed. How can I get Windows Defender works again.

  Hello

  read this information on the Defender:

  ·                         If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

  the basics of Microsoft security has its own version of windows defender

  and other anti-virus programs use their own particular type of application to scan for spyware and malware

  It of nothing to worry and is the default action, which is designed for them to do

  If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-service-in-Windows-Server-2008-or-Vista/

  and here is the method to remove it from startup in vista

  http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/

  and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/

      

  and if you need to change startup programs read this information on the other methods of doing it without using defender

  using msconfig read this tutorial:

  How to use MSCONFIG in Windows Vista

  Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  and also try this FREE program Autoruns:

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• Defender of Windows Application failed to initialize x 0 80070006. The handle is not valid.

  When I connect to my pc the "Windows defender Application failed to initialize x 0 80070006. The handle is invalid. "appears.
  And then when I go into my control panel and open Windows Defender is the same thing.
  How can I stop this?
  Thank you

  Hello

  read this information on the Defender:

  ·                         If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

  the basics of Microsoft security has its own version of windows defender

  and other anti-virus programs use their own particular type of application to scan for spyware and malware

  It of nothing to worry and is the default action, which is designed for them to do

  If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-service-in-Windows-Server-2008-or-Vista/

  and here is the method to remove it from startup in vista

  http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/

  and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/

      

  and if you need to change startup programs read this information on the other methods of doing it without using defender

  using msconfig read this tutorial:

  How to use MSCONFIG in Windows Vista

  Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  and also try this FREE program Autoruns:

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• Run the application in "hidden" mode

  Hi, it is possible to run an app webworks in hidden mode? I need the app autostart when turn the phone on and appear as "invisible" for the user, namely, enforcement can be its icon in the menu but do not appear in the recent applications / open.

  Kind regards!

  Currently 'hidden' or as it is known in the BB10 "headless" would need be run in native code...

  http://supportforums.BlackBerry.com/T5/Web-and-WebWorks-development/could-we-get-an-update-on-headle...

• Problems withdraw the application for RuntimeStore

  I have an application that listens to gps, e-mail and sms events. Because I need this application to run at startup of the bb, I used the method mentioned in many articles in kb by placing my application in the Bank to run at startup so that when my gui starts the user interface checks the runtime of the application store and proceeds accordingly. It all works perfectly. My problem comes when I need to stop the background of the GUI thread. I call shutdown in which the application stops all threads, that it is running and then I call a system.exit (0). All threads stop perfectly and closes my gui. However when I return to run the GUI with to restart the phone the waitForSingleton recover again the same background as application before having no threads running in it, and so nothing happens in the GUI (map changes). I also tried to remove the substantive application of the RuntimeStrore through .abolish. When I do cela background threads perfectly but the user interface may not start because an Exception is thrown stating that

  application running in this process... However, this is not when I call the store of runtime. Any ideas as to what I'm doing wrong?

  Thanks in advance

  if(args.length>0 && args[0].equals("gui"))
          {
  
              System.out.println("Starting GUI");
              Controller controller=waitForSingleton();
              try{
              WhereAreYouMain app=new WhereAreYouMain(controller);
              app.enterEventDispatcher();
              }
              catch(Exception e)
              {
                  System.out.println("************EXCEPTION: "+e.getMessage());
                  return;
              }
          }
          else
          {
  
                  boolean AutoStart=true;
                  if(ApplicationManager.getApplicationManager().inStartup() && AutoStart)
                  {
                      System.out.println("********************STARTING WHEREAREYOU*************************");
                  Controller app=waitForSingleton();
                  System.out.println("****************************Started WhereAreYOU**********************");
                  }
              }
          }
  
      public static Controller waitForSingleton()
      {
          RuntimeStore store=null;
          store=RuntimeStore.getRuntimeStore();
          Controller controller=null;
          controller=(Controller)store.get(AppId);
          if(controller==null)
          {
              try{
  
              store.put(AppId, new Controller());
  
              }
              catch(Exception e)
              {
                  System.out.println("Error putting app in storage"+e.getMessage());
              }
          }
          return (Controller)store.get(AppId);
      }
      public static void removeFromRuntimeStore()
      {
          RuntimeStore store=RuntimeStore.getRuntimeStore();
          store.remove(AppId);
  
      }
      public WhereAreYouMain(Controller controller)
      {
          WhereAreYouMainScreen screen=new WhereAreYouMainScreen(controller);
          controller.setMainScreen(screen);
          pushScreen(screen);
      }
  

  When stop you your application, you also have to remove all listeners?  If one of them has a reference, your application will be not eligible for garbage collection and it will remain.

  I understand that this approach (to put the application in RuntimeStore) is actually used in some articles in the KB, but I wouldn't recommend it.

  Instead, I would say put you a small 'data only' RuntimeStore object, call this myRuntimeStore object.  I - this so that you can set a reference to your UiApplication in this document, for example. Have a myRuntimeStore.setMyApp (.) method.  Now your audience can get your app if they want, using myRuntimeStore.getMyApp ().  More importantly, you can erase it and make sure that your application will.  You may encode your listeners to do nothing if your application is not present.

  However, I would like to recommend more than you do not actually store references to your application.  If you need something to initiate treatment in your application process, use a global event.  This beautifully isolates your application of your listeners.

• Auto-start applications BB10

  Hello

  When the device is started I want to autostart My App.

  1. In what setting on the device, I can set the automatic start-up of applications?
  2. How do I program the app that it is started automatically?

  Kind regards

  Hello

  I played a bit with the sample app http://developer.blackberry.com/native/sampleapps/ headless. It seems that when you run an application without head and do not close it manually in the app Manager app is started automatically when you restart the device.

• Enry Point on Storm application error

  I spent some time getting my application to work correctly with multiple entry points.  After the articles, I have now a main GUI application and also an autostart module which, among other things, updates the main icon.  I use the technique of the call launch() with some settings special (like "updateIcon") to get the correct behavior. Things work well.

  So I'm now doing a lot of testing in-depth on different platforms and a mysterious error arises.  When the storm running Simulator and the installation of the app the OTA (not just the race to Eclipse) method, I get an error when the installation is complete: "untrapped Exception. Module with handle [6952] and [0] index has no application entry point '. '.  After a reboot, everything works fine, I do not see the error, and the icon is updated in the background, OK.

  It's the offending section:

  UiApplication.getUiApplication () .invokeAndWait (new Runnable() {}
  public void run()

  If I comment the line below, I don't see the error at all.

  HomeScreen.updateIcon(bitmap,0);
  }
  });

  I am currently taking the low road and just trapping the IllegalArgumentException around updateIcon appeal, but I do not like this solution.

  Why this ugly error does not only appear during installation?

  Thank you

  Jim

  I might have found a solution!

  An idea that I had was that the other point of entry that runs at startup (and apparently starts right after installation) could start before the main entry point (0) is installed/related in / ready to go/etc.  I tested it by putting Thread.sleep (1000) as the first thing that the other point of entry, and it seems to work!  I don't know the details under the hood on how these modules get installed or started, but the notion of a race condition critical could explain both what I'm seeing and why its not appear in other platforms and/or any from methods (eg. no problems during the eclipse everything starts up).

  I will test some more and it keep it open for a comments for a few days before marking as resolved.

  Thank you

  Jim

• Background application that listens on the keyboard.

  Hi all

  I am trying to create a targeting of enforcement 5.0 devices, allowing the backlight when a sequence of characters are typed on anywhere, but the keyboard.

  Any gueses how to implement a listener in a request like that?

  Thanks in advance.

  Accelerator that is happening, but you have to shake hard!. Otherwise I would need my application to be notified (it works on autostart, so it is already running) when the hot (convenience) is pressed.

  I think back to use another (secondary) application that signals the main application (backlight) (and secondary application starts on the shortcut key, informed and closed), fire is lit in an event. And then you press this key, the main application is notified to the turn off, and the closure of the secondary application.

  There could be a direct way to do it. I mean: I need this secondary application?