autoSubmit and validation

Similar Questions

• Did someone knows a way I can delete the fonts of all WIN XP and then download a CLEAN game and validated?

  Did someone knows a way I can delete the fonts of all WIN XP and then download a CLEAN game and validated?

  Validater fonts Microsoft can manage only a small subset at a time without crashing, and I prefer nuke batch and start over.
  Win XP Pro SP3, Office 2003 PRO.
  And relocation of the disk / repair / restoration clean them...

  What is the problem with your fonts?

  I have very few problems of fonts in my notes...

  I took a this auditor of fonts and I don't know what that is supposed to do, but it takes too much time everything he does, so I just stopped after several minutes while it digested 2 files.   It also seems to be unsupported.

  I compressed to the top of my fonts folder and put it on my SkyDrive, but I don't know too much about the operation of the fonts with XP and think that they must be "installed" by clicking on the file and choose to install the fonts.

  I have NO idea if this zipped upward file will help you or not, but I would be sure to make a copy of what you have before overwriting things.  If things go haywire, I might have to leave town for a few days until things cool off.

  One thing is for sure... we don't know even what it is, or anything on your system.  It is because the MS Answers forum ask all system information when a new question is requested (which is doubly certain).

  I downloaded a copy of my zipped folder fonts on my SkyDrive (everyone has a SkyDrive for file sharing).

  Here is the link to my SkyDrive and you can get the file you need it (fonts.zip).

  http://CID-6a7e789cab1d6f39.SkyDrive.live.com/redir.aspx?RESID=6A7E789CAB1D6F39! 311

  When you see the files available for download, you will not see the file extension (.exe, .dll, .cpl, .sys, .zip etc), but when download you them they will have the right extension.

  When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, it cannot save the file with an extension (for example, .exe, .dll, .cpl, .sys, .zip) then you will need to manually add the extension appropriate to the file when you download the file before you save it.

  You can download the file without the extension, and then rename the file to add the appropriate extension.

  Rotsa ruck and we inform!

• HP Simplepass and validity sensor Versions

  Hello

  I recently had trouble with the digital simplepass and validity of hp. What are the latest version which are compatible with others and my computer?

  It's an Australian Pc by the way
  Product name: HP ENVY m6 (m6-1117mx) laptop

  Product number: C7E77PA #ABG

  8.1 Windows 64-bit

  Thanks for your help!

  Hi Cookie,

  I don't like upgrades.  I had so much trouble with them.

  You are the only first posting engine error, thank you for this.  It actually helps.

  Have you installed the following from the Support Page of your computer?

  Driver v9.4.0.1026 and Intel Chipset Installation Utility sp63640

  I agree that other people have the same problem - on a large number of these systems on which people have the worst problems, operating systems are indeed updated.

  ============================================================================

  As to the original question; I work around it.

  The answer is, as I understand it:

  • HP SimplePass 2011 / 2012 V5.3.1.7 (the most recent of the 'old' versions still in use)

  > Driver 4.3.118

  • HP SimplePass 2011 V5.4.0.402 - buggy and not recommended
  • HP SimplePass V5.4.0.620 (from AuthenTec) - is no longer available

  NOTE: None of the above versions work with newer versions of browsers Firefox or Chrome

  • HP SimplePass V6.0.100.257, V6.0.100.272 - obsolete, while 272 is always used and works for these books for which it was originally planned.
  • HP SimplePass V6.0.100.276 latest version, series 6 AuthenTec - available at HP

  > Validity sensor Driver 4.3.205.0 (or later / more recent)

  The latest version of series 6, if already installed AND that if he worked previously with Chrome, can still work with Chrome IF a particular solution is used AND of workaround is installed before the original Extension nonfunctional is removed from Chrome.  Confusing?  Yes.

  Series 8 HP SimplePass, the Softex version that now comes with new HP laptops, works with Windows 7 to Windows 8.x - when it works at all.  (Personal observation).  Series 8 requires Internet Explorer.  Series 8 worked for about three weeks with Chrome Google stomped on it.  Series 8 HP SimplePass seems to work with 4.3.205.0 drivers and newer.

  ===========================================================================

  Click on the Thumbs - Up Kudos to show that you appreciate the help and time of our Experts.

  Although I strive to reflect best practices of HP, I do not work for HP.

  Click on accept as Solution when the answer is a good solution or workaround!

• Microsoft Silverlight, it is a safe program and valid Microsoft?

  Original title: two Programs from Microsoft I am not as information indicating if I remove them

  In my list of programs, I came across a program called Microsoft Silverlight that wouldn't uninstall.  Is it a safe program and valid Microsoft

  Same question for Microsoft.net framework 4.5.1

  Hi Jerry,

  Welcome to the Microsoft community.

  Microsoft Silverlight is a safe program, which was created by Microsoft. The same for Microsoft.net framework 4.5.1 they are both safe programs, there is no need to remove them!

  Answer please if you need help.

  See you soon,.

  Leo

• Problem with stored procedure and validation

  I have the following stored procedure:

  create or replace PROCEDURE SOME_PROC)

  /*

  Some settings

  */

  ) AS

  NUMBER of errors

  BEGIN

  errors: = FN_CHECK_BUSINESS_RULE_1 (/ * some args * /);

  if(Errors > 0) then

  raise_application_error (ERR_CONSTANTS. SOME_ERROR_NUMBER, ERR_CONSTANTS. SOME_ERROR_MESSAGE);

  end if;

  INSERT INTO une_table (/ * columns * /) VALUES (/ * values * /);

  END SOME_PROC;

  Because the business rule 1 is placed inside the stored procedure I can't check it out without calling the stored procedure.

  I need to call the stored procedure 10 times with a different set of parameters and validation of the changes only after all calls to the stored procedure

  are successful. I want to show the user all the errors that occurred during the stored procedure calls. If for a first example of stored procedure call

  succeeds and a second failure no data has to be stored in a database.

  How to prevent the stored procedure for insert lines until I call the method commit of ApplicationModule?

  Thanks in advance.

  No, other users only see the lines until you commit. The search term is the transaction isolation level. Tom Kite write a paper on this here ask Tom: on transaction isolation levels. This article gives some samples, according to theory, and you should read it.

  Timo

• I have a current subscription and valid for my laptop and still, this won't work for me?  Do I need to register with a serial number? and it is limited to a PC in my house?

  I have a current subscription and valid for my laptop and still, this won't work for me?  Do I need to register with a serial number? and it is limited to a PC in my house?

  Hi randyb71782130,

  Acrobat can be installed on 2 computers, but it can be activated on a computer at a given time.

  You have the subscription if you do not require a serial key, it will be activated using the Adobe ID once you connect.

  Now just let me know the cause, you try to activate Acrobat on your second system?

  What is the error code or exact error you receive?

  Kind regards

  Nicos

• Help with conditional display and Validation

  Version 4.1.1.00.23

  Hello

  I'm having a difficult time with a conditional display and validation, I hope someone can help with.

  Requirements:

  When (Datepicker) Start Date or the end Date (Datepicker) change can display the reason for change (select list) and change Description (Textbox)
  If the page is saved without entering a reason change display an error message of validation that the reason for the change cannot be empty (NULL)

  What I tried

  Create a dynamic Action on the Start Date

  Event: Change

  Selection type: Article (s)

  Items (s): P51_START_DATE

  Condition: no

  Real Action Section:

  Action: Show

  Fire on Page load: Checked

  Display all the elements of the page on the same line: NO.

  Section of the elements concerned:

  Selection type: Article (s)

  Product (s): P51_CHANGE_REASON, P51_CHANGE_DESC

  I also created a dynamic Action with similar settings for the P51_END_DATE.

  I created a Validation for the P51_CHANGE_REASON as a function return error text:

  DECLARE
      v_start_date    work_items.start_date%TYPE;
      v_end_date      work_items.end_date%TYPE;
  BEGIN
      SELECT start_date
            ,end_date
      INTO   v_start_date
            ,v_end_date
      FROM   work_items
      WHERE  work_items_id = :P51_WORK_ITEMS_ID;
      IF ( (v_start_date != TO_DATE(:P51_START_DATE,'DD-MON-YYYY') OR v_end_date != TO_DATE(:P51_END_DATE,'DD-MON-YYYY') ) AND
            :P51_CHANGE_REASON IS NULL ) THEN
          RETURN 'Change Reason must have a value';
      END IF;
  END;
  
  
  

  The question

  I tried to create another dynamic Action to hide the P51_CHANGE_REASON and P51_CHANGE_DESC fields during the loading of the page, but when the date fields are changed and the validation is fired the P51_CHANGE_REASON and the P51_CHANGE_DESC are hidden again.

  There are two buttons to send the page: 'SAVE' will submit the page and stay on the page and 'SAVE_CHANGES' will present the page and creates a branch to the previous page (which is a relationship with the EDIT buttons to change recording).

  I can not loading the dynamic Action page for fires DO NOT when validation is triggered.

  I hope it is clear and if not what information can I provide?

  Thank you

  Joe

  Which the condition is failing and what browser? I tested it in Firefox and it works as it should. Can you confirm that?

• Submit / run HTML on submit - after calculations and Validation

  Hello
  
  I use this code to send SMS, I want to run using PL/SQL process on submit - after calculations and Validation.

  http://xxxxxx.biz/api/api_http.php?
  username=xxxx&password=xxxx&senderid=SMSALERT&to=&P8_MOBILE.,&P8_MOBILE2.&
  text=&P8_TEXT.&type=text&datetime=2013-01-07%2010%3A48%3A53

  Is this possible? How?
  
  I use APEX 4.2 on Glassfish 3.1.2 listener 2.0, Oracle 11 g R2...
  
  Kind regards
  Fateh

  Hi Fateh,

  try to use the utl_http package to make a http request.
  For example:

  declare
    t_http_request   utl_http.req;
    t_http_response  utl_http.resp;
    t_text           varchar2(32767);
  begin
    --Setup your http request and get http response
    t_http_request  := utl_http.begin_request();
    t_http_response := utl_http.get_response(t_http_request);
  
    --Process the response
    begin
      loop
        utl_http.read_text(t_http_response, t_text, 32766);
        --do something with the response
      end loop;
    exception
      when utl_http.end_of_body
       then
         utl_http.end_response(t_http_response);
    end;
  exception
    when others
    then
       utl_http.end_response(t_http_response);
       raise;
  end;
  

  Also, make sure that you have configured the network ACL to perform the http request.
  Take a look at this page http://www.oracle-base.com/articles/11g/fine-grained-access-to-network-services-11gr1.php for info on this subject.

  Kind regards
  Erik-jan

• AutoSubmit and CRUD

  Hello.
  
  JDeveloper 11.1.1.2, jsff, bc4j
  
  I want to do a SELECT a field with Autosubmit and a valueChangeListener and according to the result maybe an UPDATE. This is why I need a database connection.
  
  QUESTION:
  
  What is the best way to access the database in the above scenario:
  
  one)
  by writing the code in the ApplicationModuleImpl and run this code.
  
  (b)
  by writing a bean managed which do create / is an ApplicationModuleImpl and get out in turn the dbConnection from there.
  
  Best regards
  Erik

  To any code base to your model layer, therefore, in this regard, option A.

  Then, expose the service method in your AM to the customer interface and create a binding method for this in your definition of the page and name it through the link layer.

  In general, if you use a binding of the ADF, never deal with AMs directly in your view layer.

  John

• disinfect and validation of sessions and cookies

  From a security point of view I'm disinfection and input validation.

  Create a session using the displayed username that is disinfected and validated first on a registration of the user.

  On further visits when the usernames in their username is validated data base and again a session is created and used throughout their pages.

  I put only ever the SESSION for the user, but in my code at the end of the session (according to the information I have seen and read), I finished the session with:

  unset($_SESSION['username']);

  $_SESSION = array();

  invalidate the session cookie

  If (isset($_COOKIE['username'])) {}

  setcookie ('username', ", time () - 86400, ' / ');

  }

  session_destroy();

  Now, I never really the cookie or use it to my knowledge but I have seen that this code should be used to end a session, so I presume that there is a valid reason and that the SESSION must use the COOKIE and I wonder if $_COOKIE ['username'] must be disinfected whenever the user navigates to a different page in their administration pages I saw that filter_input functions have an option to filter the entrance of cookie. I apologize for not understanding what are cookies in this situation, everything I do is actually set during the connection session and finish on logout.

  I do something like:

  If (filter_has_var (INPUT_COOKIE, "username")) {}

  $cleancookie = filter_input (INPUT_COOKIE, 'username', FILTER_SANITIZE_STRING);

  $_COOKIE ['username'] = trim ($cleancookie);

  Maybe it would also be useful if I knew why I had reset the session cookies every time I have finished a session, if someone could kindly explain.

  Following disinfection session cookies what the stored value in $_SESSION ['username'], so that the user moves between their admin pages this value should be reorganized and if so please could someone advise me how best to do this. Maybe I should validate against the expected values of just say letters and numbers?

  Thank you in advance for any help, information and answers to help me to understand and solve the problems of security above.

  tessimon wrote:

  invalidate the session cookie

  If (isset($_COOKIE['username'])) {}

  setcookie ('username', ", time () - 86400, ' / ');

  }

  .. .in my code is not relevant in this situation and can be removed?

  At the start of:

  unset($_SESSION['username']);

  session_destroy();

  Yes. That should be enough.

  What about the security of the SESSION ID variable is stored as a cookie on the user's computer, can it be corrupted?

  Once someone has been connected, it is generally considered a good idea to regenerate the session ID using session_regenerate_id(). To do that only once in respect of the identification of the user information has been verified.

• Validate the components even with autosubmit and immediate

  Greetings:
  
  I work in an application using ADF 11 g. In my page, I have a < af:selectOneRadio > with two options (selectItem). These selectItem have both immediate and autoSubmit attribute equal to true. Then, there is a < af:panelGroupLayout > what prior partialTriggers for selectOneRadio attribute points. Inside the panelGroupLayout, there are a few < af:inputText > ' s. All are necessary. Depending on the value of selectOneRadio, some entries will have their label has changed, while others will be (or not) renderized. After this panelGroupLayout, I have a < af:commandButton >, where there will be the actual presentation.
  What I was expecting, it was, when I changed the select value, a partial presentation would be done without validation and changed the labels or the rederization of the components inside panelGroupLayout. However, the components are being validated. The error messages are displayed and the chagings components do not move.
  Googling for a solution (https://www.google.com.br/search?q=adf+not+validate+at+partial+submit), I found some suggestions that either didn't work or thought too complicated (for example, to use a subform and set the page definition XML (http://www.oracle.com/technetwork/developer-tools/adf/learnmore/40-ppr-subform-169182.pdf)). I think there is a simpler solution, but I couldn't find it.
  Below is my code JSF:

     <af:form id="formCadastroUsuarioLicitacoes" usesUpload="true">
         <af:panelGroupLayout halign="end" id="pnGL1">
              <af:selectOneRadio id="radioType" value="#{viewScope.myManagedBean.type}" immediate="true" required="true"
                                      styleClass="radioType" autoSubmit="true">
                 <f:selectItem itemLabel="Type A" itemValue="a" id="itemA"/>
                 <f:selectItem itemLabel="Type B" itemValue="b" id="itemB"/>
              </af:selectOneRadio>
               
                 <af:panelGroupLayout id="panelGroupForm" partialTriggers="radioType" styleClass="AFStretchWidth">
                   <af:inputText id="txfDoc" value="#{viewScope.myManagedBean.document}"
                                     label="#{(viewScope.myManagedBean.type == 'b')? 'Doc B': 'Doc A'}" required="true" 
                                     />
                   <af:inputText id="txfcompany" value="#{viewScope.myManagedBean.company}" label="company"
                                     rendered="#{(viewScope.myManagedBean.type == 'b')}" required="true" />
                   <af:inputText id="txfName" value="#{viewScope.myManagedBean.name}"
                                     label="#{(viewScope.myManagedBean.type == 'b')? 'Your Name': 'Name'}" required="true" />
                   <af:inputText id="txfEmail" value="#{viewScope.myManagedBean.email}" label="Email" required="true" />
                   <af:inputText id="txfEmailConfirm" value="#{viewScope.myManagedBean.emailConfirm}" label="Confirm your Email"
                                     required="true" />
                   <af:inputText id="txfphine" value="#{viewScope.myManagedBean.phine}" label="phine"
                                     rendered="#{(viewScope.myManagedBean.type == 'b')}" required="true" />
                   <af:inputText id="txfFax" value="#{viewScope.myManagedBean.fax}" label="Fax"
                                     rendered="#{(viewScope.myManagedBean.type == 'b')}" required="true" />
                 </af:panelGroupLayout>
               
              <af:commandButton text="Submit" id="btnsubmit" action="#{viewScope.myManagedBean.save}"/>
         </af:panelGroupLayout>
    </af:form>

  Thank you
  
  Rafael Afonso
  
  Edited by: 993323 04/04/2013 13:50

  Hey,.

  I hate to be the one to bind the docs of Oracle. Did you read this part though? http://docs.Oracle.com/CD/E23549_01/Web.1111/b31973/af_lifecycle.htm#CIAIDFGC

  I also know that among the people Oracle Ace wrote a blog on this. I think it's Timo, but I couldn't find him. It's been a while since I read it.

  In any case, my suggestion would be to examine the life cycle methods that get ignored when the immediate value is set and see if this makes your problem more clear for you.

  I'm sorry I couldn't be of more help, I only looked a bit in the field validation and the immediate field.

  Good luck
  Dustin

• SVG trace element not working in FF 6.06 but works in all other browsers and validated by W3C service

  Hello
  I'm writing a game using SVG and for some reason the path element is not dispaying in FF 6.06.

  It follows the SVG 1.1 as per the W3C documentation and works in all other browsers, I tried same IE9. It must be something simple, but I can't. OK, it is validated by the w3c validation service. Here is the URL and also the source.

  http://www.ironagegames.com/iasb350bc/help/SVGTests/MyMan.svg

  <?xml version="1.0" encoding="UTF-8" standalone="no"?>
  <svg
     xmlns:svg="http://www.w3.org/2000/svg"
     xmlns="http://www.w3.org/2000/svg"
     version="1.1"
     width="600"
     height="600" >
  <g transform='translate(100,0)'>
  <!--<rect x='0' y='0' height='60' width='20' style='stroke:red;fill:none;stroke-width:1px;' />-->
  <circle cx='10' cy='5' r='4' style='stroke:none; fill:BurlyWood;' />
  <path d='m 2 10, l 16 0, a 2 4 0 0 1 2 4, l 0 18, c 0 2, -3 2, -3 0, l 0 -18, -2 0, 0 40,
  c 0 2, -4 2, -4 0, l 0 -22, l -2 0, 0 22, c 0 2, -4 2, -4 0, l 0 -40, -2 0, 0 18, c 0 2, -3 2, -3 0,
   l 0 -18, a 2 -4 0 0 1 2 -4' style='stroke:none; fill:BurlyWood;' />
  <path d='m 2 10, l 16 0, a 2 4 0 0 1 2 4, l 0 4, -3 0, 0 -4, -2 0,
  0 18, -10 0, 0 -18, -2 0, l 0 4, -3 0, 0 -4, a 2 -4 0 0 1 2 -4'
  style='stroke:none; fill:#8B7355;' />
  </g>
  <g transform='translate(100,0)'>
  <!--Med Spear
  <path d='m -10 55, l 0 -40' style='stroke:SaddleBrown; fill:none;stroke-width:1px;'/>
  <path d='m -11 18, l 1 -3, 1 3, z' style='stroke:grey; fill:grey;'/>
  -->
  <!-- SHORT JAV -->
  <path d='m -6 55, l 0 -18' style='stroke:SaddleBrown; fill:none;stroke-width:0.5px;'/>
  <path d='m -7 37, l 1 -2, 1 2, z' style='stroke:none; fill:grey;'/>
  <path d='m -3 55, l 0 -18' style='stroke:SaddleBrown; fill:none;stroke-width:0.5px;'/>
  <path d='m -4 37, l 1 -2, 1 2, z' style='stroke:none; fill:grey;'/>
  <path d='m -0 55, l 0 -18' style='stroke:SaddleBrown; fill:none;stroke-width:0.5px;'/>
  <path d='m -1 37, l 1 -2, 1 2, z' style='stroke:none; fill:grey;'/>
  <!-- Body Shield -->
  <path d='m 24 10, c 2 -1, 10 -1, 12 0, c -1 2, -1 22, 0 24,
  c -2 1, -10 1, -12 0, c 1 -2, 1 -22, 0 -24'
  style='stroke:grey; fill:SaddleBrown;stroke-width:2px;stroke-linecap:round;'/>
  <!--Short Sword -->
  <path d='m -10 15, l 0 -5' style='stroke:SaddleBrown; fill:none;stroke-width:1px;'/>
  <path d='m -12 15, l 4 0' style='stroke:grey; fill:none;stroke-width:1px;'/>
  <path d='m -10 30, l 0 -15' style='stroke:grey; fill:none;stroke-width:2px;'/>
  <path d='m -9 30, l -1 2, -1 -2, z' style='stroke:none; fill:grey;'/>
  </g>
  </svg>

  I think that this file violates 2 syntaxrules of SVG 1.1 SE.

  1. The separator for a statement drawto is ws * no comma-wsp
  2. Elliptical-arc-argument does not number of negativ

  See http://www.w3.org/TR/SVG11/paths.html#PathDataBNF

• How XP activation and validation will work after 08/04/14?

  Well, it's been six months now.  EOL of XP.  Clearly a large NUMBER of companies plan to continue using XP in the foreseeable future since one-third of the browser visits on the web are still running on XP.  So, I wanted to know what Microsoft officially plans to a situation that is coming:

  XP was the first OS to feature activation) 1 line and 2) (Genuine Advantage) validation.  Microsoft is planning to continue the servers for these two functions for XP owners can continue to clean install their copies of XP or add expansion cards/readers who re - raise the bogey of validation?  Or Microsoft will manage it as managed Adobe CS2?  Or Microsoft simply refuses to activate and validate XP after April 8, 2014?

  User name final XP and business owners in the world, curious class action attorneys want to know how Microsoft plans the treatment the fine mess they are?

  Windows XP support in April end: answer three questions more

  Quote

  Q: Will Microsoft constantly demanding that XP users activate Windows XP from 8 April 2014, since the assumption of the product ends?

  A: No. A spokesman confirmed that activations will still be needed for facilities of sale to the detail of the post Windows XP April 8. "BeWindows XP can still be installed and activated after the end of support April 8," noted the spokesman.

  Another update (January 15): for those who ask in the comments below, Microsoft will continue to make all fixes and patches made Windows XP until April 8, 2014, available to users through Windows Update. "There is no current plans to remove Windows XP existing security updates from Windows Update after the end of support on April 8, 2014", confirmed a spokesman.

• Computer saying non-genuine windows, and validation of the needs

  I bought my computer from PC World in 2008 with Windows Vista Home Premium installed. After four years, it is not authentic saying of Windows and requires validation. Unfortunately, the label on the bottom of my computer is unreadable and I don't have the box in which I bought it so did not not the Validation Code of the product. I recently had the computer repaired in a store of the local computer. This could be the reason for the message?

  Thanks for any help you can give me.

  Your problem is that, for some reason, the system is unable to properly read the table SLIC in BIOS, what is required in order to triggered the key OEM_SLP with which the computer came installed.

  The normal solution is to change the key for that on your COA sticker - but you say that you are unable to read the key here.

  In such circumstances, are the only things you can do

  (1) Re-create the license store - in which case it's a minor software problem causing the is

  2) try to update BIOS to the latest available Vista compatible one, since the manufacturer's website

  (3) contact the manufacturer and see if they can provide assistance to correct the SLIC table

  (4) a reformat and reinstall using the manufacturer's recovery media

  (5) purchase of a new license for Windows (or a new computer)

  Since it is a 'new' installation, the problem is obviously not #1

  #2 is a possibility--but a rare

  #3 is a possibility and worth a try (but can cost $$)

  #4 you seem to have already tried.

  #5 is the option of last resort. (it costs money!)

  It * may * be an alternative solution, if you are patient and persistent.

  Attempt to activate by phone and speak to an operator - they will tell you that your current key is locked (they then seek confirmation of your product key). Explain your problem, you must change the key of your sticker, but the thumbnail is unreadable (they could please provide a replacement key?). If all goes well, they will request documentary proof of the sticker, in the form of an e-mail with a picture of the affected tile - and you can proceed from there.

  It sometimes takes two or three calls before you get an operator who knows and uses this procedure, but I know that it is possible and happens.

• Key product and Validation-Help me please

  Hello I have a Dell laptop. Microsoft Genuine Advantage Diagnostic Tool (1.7.0110.1) says that my status is authenticvalidation;
  but when I go to activate Windows now in the system, the window of Activation of Windows said to type a different product for activation key,
  The details of the error are:
  Code: 0xC004C003
  Details: The activation server determined that the specified product key is in use.
  I don't understand, the product key is used by someone else?

  Diagnostic report (1.7.0110.1):
  -----------------------------------------
  Given WGA-->
  Validation status: genuine
  Validation code: 0
  Online Validation code: 0x0
  Code of Validation caching: 0x0
  Windows product key: *-* - 6CDQM - RV23K-RP8F7
  Windows product key hash: 7VrYSubZ86JPxkAAnCqEelHYZa4 =
  Windows product ID: 89580-014-0000025-71519
  Windows product ID type: 5
  Windows license type: retail
  The Windows OS version: 6.0.6001.2.00010100.1.0.001
  ID: {81D51733-33C4-4584-BC45-BB92EA60D2CD} (3)
  Admin: Yes
  TestCab: 0x0
  WGA version: registered 1.7.69.2,
  Signed by: Microsoft
  Product name: Windows Vista (TM) Ultimate
  Architecture: 0x00000000
  Build lab: 6001.vistasp1_gdr.080917 - 1612
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  WgaER data-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: 6.0.6002.16398

  WGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  WGATray.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 103 blocked VLK
  Microsoft Office Professional Plus 2007-103 blocked VLK
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: B4D0AA8B-709-645_025D1FF3-282-80041010_025D1FF3-170-80041010_025D1FF3-171-1_025D1FF3-434-80040154_025D1FF3-178-80040154_025D1FF3-179-2_025D1FF3-185-80070002_025D1FF3-199-3_FA827CE6-153-8007007e_FA827CE6-180-8007007e

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 7.0; Win32)
  Default browser: C:\Program Files\Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {81D51733-33C4-4584-BC45-BB92EA60D2CD}1.7.0110.16.0.6001.2.00010100.1.0.001x 32*-*-*-*-RP8F789580-014-0000025-715195S-1-5-21-537402453-2196465834-1190256774Dell Inc.. Inspiron 1525 Dell Inc.. A13 20080627000000.000000 + 0003C323507018400EA04090409Asia Standard Time(GMT+05:00) Western03DELL M08 103103Microsoft Office Professional Plus 200712fFic3JgCreGGRxyF8uMWB4R4Jcg =89409-707-1528066-6567014 ACD7202654E586

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.0.6001.18000
  Name: Windows Vista, Ultimate edition
  Description: operating system Windows - Vista, retail channel
  Activation ID: 30fab9cc-8614-4339-989f-7ce61fb7a5c4
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 89580-00142-014-000002-00-1033-6000.0000-3392008
  Installation ID: 014776831942024701589206027865890753061386333582702130
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=43473
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=43474
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=43476
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=43475
  Partial product key: RP8F7
  License status: initial grace period
  Time remaining: 41580 minute (s) on (28 day (s))

  --> HWID data
  Current HWID of Hash: QAAAAAEABwABAAIAAQABAAAABAABAAEAnJ8O1noQtsBszMCyNr9sPEaD/JDkdwaklPvy9Jaqe0ymHAKZrFYqhQ ==

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: no, table invalid SLIC
  Windows marker version: N/A
  OEMID and OEMTableID consistent: n/a
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  REFERENCE DELL M08 APIC
  FACP DELL M08
  HPET DELL M08
  STARTING DELL M08
  MCFG DELL M08
  M08 DELL SLIC
  OSFR DELL M08
  SSDT PmRef CpuPm

  When I look at the bottom of my laptop, I don't see the product key!
  I have 29 days to activate.

  I don't see any real alternative to return to the manufacturer of the system. Even if it is simply a bug in the validation system, the original owner of the product key, it is the only one who knows what can happen to her. Not having is not a certificate of Authority (COA) on the back and no drive home with one, implies that the OEM you bought at some explainng to do. Ask for a certificate of authenticity for your machine.

  Messages rating helps other users

  Mark L. Ferguson MS - MVP