AutoVue Office: syntax to specify a file of .gui custom in the .properties files

Similar Questions

• Since the last nights update I get now launching explorer.exe "windows cannot access the specified device, file, or the path?

  Since update of last nights, I get now launching explorer.exe "windows cannot access the specified device, file, or the path?

  Hi Jemd3,

  I suggest you to completely remove Norton of the system using Norton Removal Tool and check if the problem persists.

  Method 1:

  Maybe it's that your computer is affected by virus and malware. I suggest you run an online anti-virus scan and a scan for Malware. See the links below.

  Microsoft OneCare:

  http://OneCare.live.com/standard/EN-US/3/default.htm

  Malicious software removal tool

  http://www.Microsoft.com/security/malwareremove/default.aspx

  Get a free PC safety scan

  http://OneCare.live.com/site/en-us/default.htm

  Hope this information is useful.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• RootKit/Malware/Virus problem - windows cannot access the specified device file or the path, you don't have permissions

  Hello

  I have a problem with my computer it has been infected by a virus that is not visible in normal mode. It prevents running any application that would help in the detection and removal. I tried running mrt, mcaffe, trendmicro rootkit detector rootkit detector, spybotSD, analysis windows Defender online Windows live onecar. All these works for a minute and then shutsdown, when I click it again I get the error, as mentioned in the title, 'windows cannot access the specified device file or the path, you do not have permissions.

  This problem has a solution or re - install is the only way out?

  The pointers/help appreciated.

  Just to add, I am able to connect using my last known good configuration and only safe mode configurations.

  Thank you

  Id2View,

  1. follow all the instructions in this thread: How to get rid of malware

  2. If still no joy you can find Microsoft MVPs and other trained analysts on the following support sites:
  Aumha.org
  Atribune.org
  SpywareHammer
  BleepingComputer
  Safer-Networking

  3. If you need help with virus-related issues, contact the Support Services Microsoft product.

  To support the Canada and the United States, call toll-free (866) PCSAFETY (727-2338).

  For support outside the United States and the Canada, visit the page Web of Product Support Services.

  4. If you need more assistance for the position of the newsgroup Microsoft - security - virusvirus/worm.
  Through your News Reader:
  News://msnews.Microsoft.com/Microsoft.public.Security.virus
  Via the Web:
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Security.virus

  Hope this helps,

  Vincenzo Di Russo - Microsoft MVP Windows Internet Explorer, Windows Desktop Experience & security - since 2003. ~ ~ ~ My MVP profile: https://mvp.support.microsoft.com/profile/Vincenzo

• Install microsoft office on my laptop cannont file corrupt or not available

  HI for the past two days, I tried to install microsoft office home and student on my computer, but no edition could not.  It will start but I receive this message Setup cannot continue because a required file is damaged or is not available.  Rerun Setup from the original source disc or download location.  I've done both and I still get the same message.

  Help, please!

  If you have an Office trial version installed, uninstall it if 1st before install paying for the version of Office.

  If you have problems uninstalling the trial, read the info on these links below:

  http://support.Microsoft.com/kb/928218

  How to uninstall manually Office system 2007 if you cannot uninstall it by using the function "Add or Remove Programs".

  http://support.Microsoft.com/kb/971179

  How to uninstall the suites Office 2007 so I can't uninstall it by using the function "Add / Remove Programs"?
  And this link is a Fix - It

  For questions of office:

  Office:

  http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx

  Office newsgroups

  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Office.misc&lang=en&CR=us

  Discussions of general issues of the Office.

  They will help you with your office questions when repost you in the Office discussion groups above.

  See you soon.

  Mick Murphy - Microsoft partner

• Specify several file types for filePicker

  Hello world

  When you specify a file type for a FilePicker, 'relevant' tab is made available on the left which includes all files of this type on your device on a single screen. I want to be able to have more than one of these tabs, so I guess that if I specify several file types that I can get the legs at all what I said.

  The FilePicker API reference for ' bb::cascades:ickers::FileType:Types defaultType "he's hinting that there is a way to specify more than one file type for a FilePicker. How can I do this?

  I got to try something that seems to work. In the use of definition FilePicker:

  type: FileType.Picture + FileType.Document + FileType.Music + FileType.Video + FileType.Other
  

  This puts a drop-down menu at the top of your filepicker where you can choose from any one of the types that you specify in the order that you specify. ('Other' Chooseing will give you the default view). Don't know if there is another or a better way to do this, but it works for now.

• Problem steps Recorder error - you have not permissions to system files needed to create the specified output file.

  I am trying to use the PSR as a domain user, but get the following error message when you try to save my record:

  "You don't have permissions of system files needed to create the specified output file.
  If I run the present when logged in as a domain administrator, I can record without problem.  But when logged in as a domain user, I get the error.  I tried "Run as Administrator" as well as "Run as different user", enter the domain administrator credentials, but still get the error.
  Everyone knows about this problem?

  Hello Giblits,

  Because the computer is connected to a domain, it would be better on the TechNet forum. I suggest you post your question on the following link to get the exact resolution.

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

• Problem with Windows Search 'Windows cannot access the specified device, file, or path. May not be the appropriate permissions for access you to computing.

  I have a very annoying problem:

  
  OT: Problem with Windows Search
  When I try to use Windows Search in the menu start I get the message "Windows cannot access the specified device, file, or path. May not permissions to access you the item. I get this message no matter what I type in. Therefore, I can't find something on my computer and continually to achieve this result.
  Could someone please help me solve this problem?
  I tried what answers I could find other peoples messages online, nothing helps. I'd appreciate any help.
  Thank you very much.

  Hello

  You did changes to the computer before the show?

  I suggest you try the steps from the following link:

  Error "Windows cannot access the specified device, path or file" when you try to install, update or launch a program or file
  http://support.Microsoft.com/kb/2669244

• ThinApp Excel 2007 and opened a specified excel files list

  I would like to know if there is a way to Thinapp Excel 2007 and opened only a list of specified excel file and or directory.

  No, you assign application for file extension and there is no way to limit it only to some files.

• I try to install the update of security for Microsoft Office System 2007 (KB972581), but if failed and I get the error code Code 57A__

  I try to install the update of security for Microsoft Office System 2007 (KB972581), but if failed and I get the error code Code 57A

  I have install the 2007 Microsoft Office Suite Service Pack 2

  I bet that if you check the size of the file that has been downloaded it will be probably very small, indicating that it was not downloaded correctly.

  I don't think you have another computer at hand, or a friend with a USB key which may be able to download and copy it for you?  Maybe burn it to a CD or something.

  I could download it and save it to my desktop so I am confident that it is not a problem with the link itself or the file is available for download with success.

  I know this isn't a very good suggestion, but the only other option would be to challenge support and see if a technician can take control of your machine and see if they can solve the problem of internet explore.

  If you find my answer was what you're looking for, remember to click on the box "mark as answer" below!

• Windows cannot connect to the printer. The name of the printer has been correctly entered, or the specified printer has lost its connection to the server.

  A Windows Server 2003 Standard Edition SP2 32-bit computer is a field, the file and print server.

  A computer on the domain is a machine of Windows 7 Ultimate 64 - bit with HP DesignJet 500 24 printer connected via USB.  The printer is running the latest firmware.  The PC is running the latest 64-bit drivers with no problems to the host machine printing.  The host also has the latest drivers 32-bit (x 86) installed by downloading by other computers on the network.  The printer is configured to share with the share name of HPDJ500.

  Now, on a machine Windows XP Pro SP3 32 bit on the field, I'm trying to connect to the shared printer.  Add a printer > click Next in the wizard of > check "a network printer or a printer attached to another computer" and then click Next > click on "Find a printer in the directory", then click Next > click Find now > HPDJ500 in the list below (the XP machine can see the shared printer on the Windows 7 computer!) and click OK.  At this point, I get an error that says: "Windows cannot connect to the printer.  The name of the printer has been correctly entered, or the specified printer has lost its connection to the server.  For more information, click Help. »

  Alternatively, if I right-click on the HPDJ500 printer listed, then click on connect, I get the same error message but I also see a separate window that says "Connecting to HPDJ500 on H2.ws.net" with the lively projector.  This window also disappears as soon as I clear the error message.

  Please note that this printer worked perfectly as a printer shared, hosted on a machine XP 32 bit on the field.  It works perfectly for the new Windows 7 64-bit machine, but we cannot connect from anywhere else on the network (including the server which translates the same exact error message).  On the server, I also preinstalled drivers thinking there was a problem with a 32-bit computer, trying to grasp the correct drivers from the host 64-bit Windows 7, but that doesn't change anything.

  How connect to this printer?

  Try using the path UNC path of the printer in the Add Printer Wizard.

  Add a printer > network printer > connection to this printer ((deuxieme point)

  Click next to browse (leave blank, the name field) or type the UNC path of the printer (i.e. \\Computername\Printername) path

• Windows XP spc 3 can't end load office and graphic icons seem to block anything does, but the slider upward.

  Is a restore but always locks up at the office. After looking for things more I discovered that the hard disk was full. Went to safe mode and remove a whole concert of image files, etc... I didn't need. Haven't tried another restore but it shows no restore points. Computer works fine in safe mode, all my desktop icons and everything seems to work properly. Any suggestions on how to bring back my system to life in normal mode?

  There could be a hard disk problem that is causing Explorer to lock up.  I suggest you perform a disk check.

  "How to perform disk error in Windows XP check"
    <>http://support.Microsoft.com/kb/315265 >

  HTH,
  JW

• "The account specified for this service is different from the account specified for other services running in the same process" while trying to connect to the internet.

  Original title: the account specified for this service is different from the account specified for other services running in the same process

  while trying to connect to internet, I get the message "connection status: unknown the account specified for this service is different from the account specified for other services running in the same process" that you start happens out of the blue. When I run the diagnostic and repair tool it says that Windows cannot resolve the problem, contact admin or your ISP. I know that my internet service works very well. I am currently on an e-machine running Windows Vista Edition Home Premium and it connects without problems. My problem is that my most recent top of office (gateway also on Windows Vista Home Premium) receives connection problems. IM connected to the internet (DSL) with the ethernet cable from the Yukon. All the lights are green on the wireless gateway, so I know that the service is very good. Strange thing I noticed, when I go to network status and share and view Gateway desktop computer shows the "Yukon Ethernet controller" as the connection while the e-machine device says Im using "Intel (R) PRO/100VE Network Connection" Im using the same cable (Yukon) and put in place for both computers, so I was wondering what that was all too. Any help is appreciated.

  Hello

  Thank you for writing to Microsoft Communities. From your problem description, I understand that you can not connect to Internet.

  1. have there been recent changes to the computer before the show?

  2. the problem occurs in safe mode with networking?

  Please go ahead and follow the steps mentioned and later a update on the State of the question.

  Method 1: Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows?T1=Tab03

  Additional information:

  The problems of Internet connection:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Please follow these recommended steps and post if you still experience the problem.

• Applications of MS Office 2007 and Adobe 8.0 appearing is not in the list of Scan destinations to

  • Series of all-in-One networking OfficeJet 7210
  • Under XP Pro with HP Director.
  • Recently of the printer in the network through router
  • Can scan directly from Adobe 8.0
  • Can configure scan TO destinations that are available (e-mail, WordPad, paint, save to file, HP Doc Viewer, etc.)
  • Can scan from the front panel of the printer for the above applications
  • Two other PC connected to the printer using Office 2003 and Adobe 6 with these apps available in the scan-to destinations

  I sent a technical support and they stop me reinstall HP Director and troubleshoot my firewall.  I don't think that's the question, given that the firewall is not blocking comms with other applications and software has been reinstalled 3 x with the same results.

  How do you get MS Office 2007 and Adobe 8.0 to be recognized as valid scan destinations?

  Center of HP Solutions can be installed and used with the OfficeJet 7210?

  Thank you!

  Try this

  -uninstall your current printer via the cd software...

  -access the cd > util > ccc > run uninstall L3/L3.bat

  -Download the software printer c6380... only install the software not the driver

  How?... to run the installation of the downloaded software as usb, when the software asks you to connect the device, check the box that says connect device later, continue it to the installation of the software

  -After installation you run printer cd and add a device and follow the instructions on the screen

  -

• All Documents and files of Desktop/shortcuts will miss - restore but still - missing but the properties of the folder indicates the used disk space

  I use Windows Vista Home Premium.  I am the only user and gave me administrative prvileges.

  I was working on my computer when I decided to look at some of my data to the application.  I have come to C:\Users\MYPROFILE but don't see the AppData folder.  However, all my other files were there (office, Documents, etc.).  I have a click with the button right on my profile and click on the attributes Hidden and hit apply.  He took a few moments he went through all folders of files (you can tell by when it indicates the size).

  After this happened, I tried to go back in C:\Users but my profile was gone.

  I restarted and when the office came, all my desktop files had disappeared and the shortcut to IE.  When I click on my profile, it was empty with the exception of the default folders.  All default folders were empty of all my data.

  I did a restore system a few days ago and my profile came, but it was always empty.  However, when I go to c:\users and right click on my profile and press properties, it shows size 11.5 GB as well as the creation date of February 17, 2009 (which is correct).  However all my data are still missing.  Any ideas?

  Display your user folder by deleting a hidden file attribute can be set on the access property page when you right click on your user folder.  Let the net of new low for subfolders and files not hidden attribute when the option is available to you.

  To see the hidden files and system under normal circumstances, go to control panel / Folder Options / view and uncheck both options so that they are visible.  This is not your main problem, however, you must remove the attribute hidden in your user folder.

• Vista - accounts - how to remove shortcuts from office (shortcuts to programs!) for an account without removing the program for another account.

  Help Cher,

  (1) I have the following accounts on my Vista Premium PC (Quad Core). Dad, Dad & mum, kidA, kidB. Some programs have a shortcut on multiple accounts, but these accounts do not have. It makes the overworked office. So I go to their desktop computer, press the shortcut and choose Delete. But it seems inevitable not to delete the program anywhere.

  (2) another point not clear to me, is that I expected to find items on the desktop to the C:\users\accountname or the D:\users\accountname. However, Dad's account is not present. Instead I find in the two readers on these posts my old account 'Eddy Kunnen', only in drive D the appropriate shortcuts are present under the desk. And the EddyKunnen account is also the only one on the D drive. I should find all items on the desktop under player: \users\accountname\desktop? And if so what could be wrong that Ii this account is not renamed to Dad. Is it possible to get all the C:\users\ accounts. Without doubt, I did something wrong in the past?

  Thank you in advance,

  Sincerely,

  Eddy

  Hello

  (1) desktop shortcuts are related either to the user or to all users. This means either:

  C:\Users\\Desktop (where is the name of the account)

  or

  C:\Users\Public\Desktop

  If a shortcut is located in the first folder, then it is specific to this user account. If in the second, it is common to all, so any action taken on this subject will apply to all accounts. If you don't want it in all accounts, copy it to the desktop folder corresponding to for those you do and remove of that Public.

  (2) you can change the name on an account, but it will not change the name of original in C:\Users. In other words, if the user creates an account, he will be under C:\Users\UserA. If subsequently, they changed their name to UserB, the real profile will always be under C:\Users\UserA regardless of the change of name, you cannot change this file name, only the friendly name of associated account. Thus, you cannot "relocate" the user account record without breaking a lot of things.
  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org