Auxiliary data import to a custom dimension FDM does not export

Similar Questions

• After the installation of Windows 'important' 3 updates my screensaver started does not. I get a message that says "ScreenSaver:Photo screensaver.scr - unable to locate component".

  Original title: screen saver does not start because MSVCR100.dll was not found

  After the installation of Windows 'important' 3 updates my screensaver started does not. I get a message that says:

  ScreenSaver: Photo screensaver.scr - unable to locate component.

  This application has failed to start because MSVCR100.dll was not found. Reinstalling the application may fix this problem.

  The screen saver starts after you close the error message. I've never had a problem with my screen saver up to that after I downloaded updates. I don't know how to reinstall the application. I tried Windows Fix - It Solutions, but it does not work. He repeated to me that it was a mistake.

  Help, please. Thank you.

  Hello

  It didn't reinstall the ATL update, it reinstalled 2005 Redistributable. So now, I have 2005 and 2010 x 86 both. And it says that two dates installiation are two days after I installed the 2010. I know 2005 and the update was uninstalled, because I checked after restart the computer and before you install the 2010 version. Very curious.

  But my Screensaver works and access to the camera seemed to work after uninstalling / reinstalling the software. So, good. Thank you.

• When I send someone a document I changed if his crossing of the stuff or by adding arrows, when the customer print, it does not show my changes, I'm going through our prices so visitors cannot see and when the customer print them they can see prices?

  When I send someone a document I changed if his crossing of the stuff or by adding arrows, when the customer print, it does not show my changes, I'm going through our prices so visitors cannot see and when the customer print them they can see prices?

  You probably use drawing markup tools. There are options to print with or without annotations. You can not change this.

  If you don't want them to see the prices, either remove the original document and recreate the pdf without them there or you can use the redaction tools in the full paid for version of Adobe Acrobat Pro.

• Custom scan box does not touch "scan" because of my 13 "screen.  Cannot reach it.  How can I fix it?  THX

  Custom scan box does not touch "scan" because of my 13 "screen.  Cannot reach it.  How can I fix it?  THX.

  Try increasing your screen resolution.

• Dimension members does not show in the form of data

  Hello
  I have a deployed application of EPMA. But when I try to create a data form and assign some members of dimensions, all members of some dimensions (scenario) are not displayed.
  Appreciate any help.

  Hello
  Have you checked the planning-> Administration-> Dimensions and checked are available in planning. For some reason, not updated members in planning even if the deployment said that it is deployed and in sync with the application library. If the members are not available in the planning, try this.
  Open the library size, disappear the dimension (in your case) the display of the application. Drag and drop the dimension of the library shared the view of the application. Deploy the application again.

  See you soon,.
  Alp

• Importer of CT in Excel 2003 does not appear in the COM add-in Menu

  I have a program that generates a PDM file with data, and when the run is complete, I would like to import the data into Excel and manipulate by using a macro. I can import the file manually and run the macro by opening a second file that contains the macro, but open the second file is a chore.

  I would like to expand the macro so that it automatically imports the file PDM, and based on what I've seen on the forums for that, I need to register to the importer TDM as a COM Add - In. When I go to the menu COM in Excel and you try to add ExcelTDM.dll, it does not appear in the menu.

  A few additional details that may be useful:

  TDM Excel importer is version 3.4.0.0

  I already tried to uninstall and reinstall the importer

  Using the Excel toolbar works to import the data

  A double click on a file works to import the data

  The installed files are located in C:\Program NIUninstaller Instruments\Shared\TDM Excel import. Moving them to C:\Program NIUninstaller Instruments\Excel TDM had no effect.

  Thanks in advance for your help.

  I do not see the importer of CT in the COM add-ins, but the VBA ran very well...

  I tested it on a clean machine with Excel 2003 and importing TDM 3.4.

• Dimension 4700 does not

  Hello world

  I have a Dimension 4700 with installed XP3 that recently started having a problem shortly after the start. The owner told me she was online when she got a BSOD. However, she cut the power without note the exact error message. Since that date, when the PC boots, it stops responding almost immediately after loading. The mouse & keyboard seem to work, but I can't click on the icons for items in the start menu. CTRL-Alt-Delete to open the Task Manager, but it does not meet the shutdown command.

  Virus-free, ran clean in safe mode, and even tried to change MSCONFIG for diag mode, but no change. I did a complete scan and it found no errors.

  Before you do a system reinstall, can anyone think another possible cause?

  Thank you in advance.

  If you end the Explorer process in the Manager of tasks and then restart it by running ecplorer.exe is the system restore?

  Probably, you should perform a new installation, see my Guide for reinstalling Windows / A Clean Windows XP installation for detailed instructions:

  http://philipyip.WordPress.com/Dell-community-forums/

• Dimension 8200 does not start

  I have a Dimension 8200, which has not been used for more than a year.  I was going to reformat the hard drive to remove all personal data, and then give it to my daughter's school.  However, it will not start.  The Dell page comes and the BIOS white bar at the bottom of this page fills slowly, but then nothing happens for about a minute.  Meanwhile, the power button is green, and the ABCD diagnostic lights are green-orange to orange-green.  Then after about a minute or two, a page of message arrives.    At this point, the diagnostic lights are Green-Green-Green-orange, and the power button is always green. Among other writings is the assertion that the 1 primary and secondary hard drives is not found.  It says also "failure keyboard,' even if I used this fairly reliable keyboard with other computers. But it does not seem that the keyboard doesn't have - I do nothing doing on the keyboard has an impact on the computer.

  I checked the optical drive opens and closes when I push the button on the front, but I have not tried to use the player, because the computer is completely non-functional.  I looked through the forum of ideas of things to try.  According to this research, I checked the power supply provides the correct voltage.  I disconnected and reconnected then the two IDE cables, and I also removed and replaced the RAM sticks, as well as two sticks of continuity.  But still nothing!

  Any ideas, or should I just trash?

  Thank you

  laserguy

  Dell Dimension 8200

  Windows XP, SP2

  Pentium 4 CPU, 2.26 MB RDRAM GHz512

  80 GB Maxtor hard drive

  
  

• Dell Dimension C521 does not start

  I have a Dell Dimension C521 desktop computer. When I try to start it, the fan turns on and is really hard, but the screen does not light. The power light on my computer lights up (green), but the 3 & 4 diagnostic lights flash repeatedly on the front of the computer. What is the cause? What can I do about it?

  NetFanatic123

  Hello Bev,

  The rest green power light on, no blinking, no beeps. I had no problem until last night after that I removed the hard drive and reinstalled.

  How can I remove the memory modules?

  Thanks :)

   

  NetFanatic123

  For the removal and reinstallation of the RAM, details are HERE NOTE from the ADMIN: broken link has been removed from this post by Dell >

  A hint: make sure that the modules are filled into the slots and the clips are in the notches.

  While the case is open, check that all the power cable and the data are correctly connected to the drive and the motherboard, by removing and reconnecting them.

  Why the hard disk has been deleted and reinstalled, was this HD replacement, or what?

  Bev.

• custom ring tone does not work

  After the update this morning I hope this question was correct.

  I use a custom for some people to know how ringtone call by ringing. But nothing changes.

  It does not work.

  Nobody knows or has heard of this problem?

  Thank you

  Try these general steps. They could help.

  1 reset your iPhone by pressing and holding the sleep/wake and home buttons.

  2 disconnect you from your iCloud account and reconnect again.

• update date and time for 3.6 numbers does not show the time and does not automatically update the date

  The 'update date and time"for numbers of 3.6 does not show the time and does not automatically update the date.  What should I do?  Thank you.

  Hi david,

  where do you find ' update of the date and time.

  Quinn

• user interface customized with VI does not

  Hello

  I tried to use a user interface customized for VBAI using VI. I got to the point where I can run the VI all by himself and to see the work of logic. However when I add to as part of the user interface and switch to the inspection mode and run it, it does nothing. Let me know if I'm doing something wrong. Attached you will find the program, I work with.

  Thank you.

  I just tried your VI... you must have a VI that does not forever in a loop. You can use some time recording the loop that runs once and uses the SHIFT to follow the previous results of previous runs of the step. Use of the is the first call? Primitive in LV to initialize the first shift register. Here is a modified Test.vi that will work better.

• Dimension 9150 does not illuminate

  My 3 year old Dimension 9150 lights.   If I unplug the power cord for 30 minutes, then reconnect the power cord, pc turns on (OS goes in the boot mode) for about 2 minutes and then stops.  I tried to hit the power button at this stage and nothing happens even if the Green LED on the motherboard is on.  If I unplug the power cord and plug everything on in, the front light will blink for 5 seconds and turns off.  By pressing the power button at this stage does nothing.  I tried switching on the power supply (I have a couple working power supplies laying around) and does not seem to make a difference.  I jumped the wires on the motherboard plug black green 24-pin psu so that it is always plugged into the motherboard and the power supply is on but no video on my monitor and the front blinks a few seconds, then it turn off even if the power supply light.  I tried to take all the connectors from the motherboard and leave only the 2 power supply motherboard caches and nothing.  I can unplug the power cord for 30 minutes again and the power of the PC and press F2 to go directly to the CMOS menu and it turns off after 2 minutes (to exclude the OS).  I took the memory and disconnect and reconnect the power cord and front lights blink for a few seconds and turns off (no beeps at all).  At this point I think it is the motherboard that is defective.  What do you think? I searched this forum and saw many people having a similar problem with their 9150 I wonder if it's a common thing for this particular motherboard.  Is it possible that the CPU is defective?  Also can someone tell me how cool Dell for a card mother dimension 9150 replacement of their parts department?

  Thank you!

  
  

• Dell Dimension 4600 does not start after upgrading CPU

  Hello

  First of all, I tried to send this last night but received a message on my post approval by moderator? Not yet been approved but seen other people have posted with success more recently. Do not know what is happening.

  In any case, put his hand on a 3.4 Ghz HT P4 Northwood 512 Kb 800 Mhz FSB for £10 on Ebay to upgrade my mother enough old Dimension 4600 which has a 2.8 Ghz P4 512 KB 533 FSB inside... However, when I install it the computer does not light and shows just a light amber. The readers and fans still spin but there is no display. The computer works normally when I put the old one back in.

  I think somehow it is a power supply problem as the new processor uses 20w more energy than the old 2.8 Ghz one. Someone at - it ideas? Just trying to figure if I bought a bad CPU, so I can return.

  Thank you

  Andrew

  AV115

  Hello

  First of all, I tried to send this last night but received a message on my post approval by moderator? Not yet been approved but seen other people have posted with success more recently. Do not know what is happening.

  In any case, put his hand on a 3.4 Ghz HT P4 Northwood 512 Kb 800 Mhz FSB for £10 on Ebay to upgrade my mother enough old Dimension 4600 which has a 2.8 Ghz P4 512 KB 533 FSB inside... However, when I install it the computer does not light and shows just a light amber. The readers and fans still spin but there is no display. The computer works normally when I put the old one back in.

  I think somehow it is a power supply problem as the new processor uses 20w more energy than the old 2.8 Ghz one. Someone at - it ideas? Just trying to figure if I bought a bad CPU, so I can return.

  Thank you

  Andrew

  AV115

  Andrew,

  It is not a power supply problem, it's incompatible, or a bad processor problem.

  The first models of 4600 will take up to 3.0 GHz and models later, 3.2 GHz to 3.4 GHz, but this does not offer much of a sudden boost on the 3.0 GHz

  Motherboard Dell P/N F4491 will support up to 3.4 Ghz Northwood leaving Prescott

  Bev.

• Custom main screen does not properly perform fields center

  I have a CustomMainScreen, but it is not completely central, field layout (they are a bit too left when Field.FIELD_HCENTER is applied to the field)

  Screenshot:

  

  Code:

  this.label_field = new CustomLabelField("Welcome to Test App",Field.FIELD_HCENTER);
  

  import net.rim.device.api.ui.Color;
  import net.rim.device.api.ui.Font;
  import net.rim.device.api.ui.Graphics;
  import net.rim.device.api.ui.component.LabelField;
  
  public class CustomLabelField extends LabelField
  {
      private int _newcolor = Color.BLACK;
      private Font _font = Font.getDefault();
  
      public CustomLabelField(String label)
      {
          super(label);
      }
  
      public CustomLabelField(String label, long field)
      {
  
          super(label,field);
      }
  
      protected void paint(Graphics graphics)
      {
          graphics.setColor(this._newcolor);
          graphics.setFont(_font);
          super.paint(graphics);
      }
  
      public void setColor(int newcolor)
      {
          this._newcolor = newcolor;
      }
  
      public void setFont(Font newFont)
      {
  
      }
  }
  

  Thank you!

  The code you have looks like it must be placed correctly, with a slight concern:

  graphics.setFont (_font);

  By doing this I think that you can change the font size.  Now the LabelField will already told the Manager how big it is, and it will be based on the police, he said.  You change it.  I assume that you make it smaller.  So presumably the LabelField has been fitted out with a larger font, your smaller font does not fill the space.

  However, you do not want to set the font in your object, that the definition of the police may cause to the new provision, which will cause a repaint, which will set the police, resulting in a new provision, another painting,...

  Then try something like this:

  SerializableAttribute public class CustomLabelField extends LabelField
  {
  private int _newcolor = Color.BLACK;
  _font private policies = Font.getDefault ();

  public CustomLabelField (label As String)
  {
  Super (label);

  this.setFont (Font.getDefault ());
  }

  public CustomLabelField (label As String, long field)
  {
  Super (label, Field);

  this.setFont (Font.getDefault ());
  }
  ....

  If this doesn't help, can you say what Manager you add this?